INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
TUNE-UP KIT
IR 2906P-TK1
IR 2906P-TK1
Tune-up Kit for Ingersoll Rand 2960P Series Air Impact Wrench
Includes: oil chamber plug seal, throttle valve seat, throttle valve, throttle valve spring, oiler body seal, exahust silencer, reverse valve bushing seal (2), trigger pin, reverse valve ball dentent, reverse valve dentent spring, housing cover gasket, rear rotor bearing, vane pack (6), front rotor bearing, hammer case gasket, socket retainer plunger and plunger springFor Use With
- 2906P1
$137.00
TUNE-UP KIT
IR 290-TK2
IR 290-TK2
Tune-up Kit for Ingersoll Rand 290 Series Impact Wrench
Includes: Throttle Valve Plunger, Stop Pin, Oiler Felt, Seal, Vane Pack, Bearings, Handle Gasket, O-rings, Spring Pack, BallFor Use With
- 290
$118.00
TUNE-UP KIT
IR 2920B-TK2
IR 2920B-TK2
Tune-up Kit for Ingersoll Rand 2920B Series Impact Wrench
For Use With- 2920B1
- 2920B1-EU
- 2920B9
- 2920B9-EU
$136.00
IMPACTOOL
IR 2940B1
IR 2940B1
No. 5 Spline Impact Wrench, 1600 ft-lb Torque, D-Handle Inside Trigger
Actuation/Throttle Type/Switch Type: Inside TriggerAir Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Blows per Min: 850
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): No. 5
Drive Type: Spline
Duty Rating: Industrial Duty
Exhaust Location: Bottom
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1601
Max Torque (in-lb): 19206
Max Torque (nm): 2170
Min Hose Size (in): 3/4
Motor: Non-Biased
Power Source: Air Powered
Product Length (in): 10.2
Product Width (in): 22.1
Product Height (in): 6.5
Product Weight (lb): 22
Recommended Forward Torque Range (ft-lb): 1003-1601
Recommended Forward Torque Range (in-lb): 12037-19206
Recommended Forward Torque Range (nm): 1360 - 2170
Recommended Reverse Torque (ft-lb): 1003-1601
Recommended Reverse Torque (nm): 1360-2170
Side to Center Distance (in): 11.1
Side to Center Distance (mm): 282
Sound Pressure/Power Db(A): 94.8 / 105.8
Tool Type: Full-size
Vibration Level (m/s2): 17.8
Vibration Uncertainy K* (m/s2): 3.4
Warranty: 1-year
Similar IR
- 2940A1
- 280-S-6
- 285B-S6
$5,372.00
TUNE-UP KIT
IR 2950-TK2
IR 2950-TK2
Tune-up Kit for Ingersoll Rand 2950 Series Impact Wrench
For Use With- 2950B7
- 2950B7-EU
$165.00
LARGE DRILL - 185 RPM
IR 33SMA
IR 33SMA
Large Air Drill, Reversible Roll Throttle, 185 RPM, 2.9HP, No. 3 Morse Taper
We have several series of large drills to meet your construction and industrial needs. The 22 Series works best for general applications up to ⅞ inch (22mm) holes, while the 33, 44, and 551 Series are better suited for opening and closing large valves, or for drilling larger holes between 1 inch (25mm) and 3 inches (76mm).Features And Benefits
- Side Exhaust: All the Ingersoll Rand large drills come with side exhaust to keep exhaust air pointed away from you and away from your work.
- Governed Motor: No matter which Ingersoll rand large drill series you’re interested in, you can expect a governed motor that regulates air intake to keep these drills working at the peak of their power curve.
Product Application and Uses: These air drills are designed for heavy duty drilling and reaming between 1 inch (25mm) and 3 inches (76mm).
Actuation/Throttle Type/Switch Type: Reversible, Roll
Air Consumption (cfm): 85
Air Consumption (l/min): 2407
Air Inlet: 1/2" NPT
Capacity in Steel Drilling (in): 1-1/4
Capacity in Steel Reaming (in): 1-1/4
Color: Beige
Configuration/Handle Type: T-handle
Duty Rating: Super Duty
Exhaust Location: Side
Height Over Spindle (in): 16.81
Length of Feed (in): 4.25
Max Free Speed (rpm): 185
Max Power (hp): 2.9
Min Hose Size (in): 3/4
Power Source: Air Powered
Product Weight (lb): 31
Reversible: Reversible
Side to Center Distance (in): 1.94
Side to Center Distance (mm): 49
Sound Pressure/Power Db(A): 96.1 / 97.1
Spindle Type: No. 3 Morse Taper
Vibration Level (m/s2): <2.5
Warranty: 1-year
Similar IR
- 33SJA
- 33SKA
- 44SMA
- 22MA2
$20,950.00
Bushing Reverse Valve, Machining
IR 382-29739
IR 382-29739
Bushing Reverse Valve, Machining
Call for pricing