INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
RECIP SAW BLADE PACKAGE FINE
IR P4FS-20
IR P4FS-20
4" Saw Blades, Fine Standard Pitch, 32 TPI, 20-Pack for Ingersoll Rand Air Reciprocating Saws
Bi-metal technology high speed steel increases blade control by 170%. New tooth profile generates smaller but more chips and reduces frictional heat.Features And Benefits
- High Speed Steel: Bi-Metal technology increases blade contact by 170%.
- New Tooth Profile: Reduces the frictional heat generated during the cutting process resulting in enhanced overall cutting performance.
- Includes: (20) 4" fine saw blades.
Includes: (20) 4" fine saw blades
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Teeth per Inch (TPI): 32
For Use With
- 429
- 4429
$79.00
CONTROL SWITCH GCH 2-BUTTON +NA, LIFT 16.4FT
IR 9290.1088.3
IR 9290.1088.3
CONTROL SWITCH GCH 2-BUTTON +NA, LIFT 16.4FT $555.00
TORQUE SELECTOR COVERKIT D5140-K144
IR D5140-K144
IR D5140-K144
TORQUE SELECTOR COVERKIT D5140-K144 $15.00
1/2" IQV20 HAMMER DRILL 2 BAT KIT
IR D5241-K22
IR D5241-K22
1/2" 20V Cordless Hammer Drill 2 Battery Kit, 1100 in-lb Torque, Keyless Chuck, Pistol Grip
Features And Benefits- Power: With the capacity of 1,100 in-lbs of torque, the D5241 IQV20™ Hammer Drill is designed with the pros in mind.
- 1/2 Inch Chuck: All-metal keyless chuck with carbide teeth ensure bits don’t slip when drilling through almost any material.
- 24-Position Clutch: Say goodbye to cam-outs and over-torqued fasteners. A 24 position clutch lets you fine-tune fastening depth, so you can work smarter, not harder.
- Brushless Motor: The combination of a powerful brushless motor means the D5241 IQV20™ Hammer Drill operates at the apex of performance in almost any application.
- High and Low Speed Options: Whether you’re drilling through wood, steel, or concrete, two speed options help you get the right level of torque, every time.
- Rubberized Design: The D5241 IQV20™ Hammer Drill's impact-resistant rubberized design helps reduce kickback, keeping you steady and safe.
- LED light: An LED light located at the bottom of the tool reduces shadows so you can see your work area clearly.
- Adjustable Auxiliary Handle: For high-torque applications, a removable ergonomic auxiliary arm helps keep you steady.
- IQV20™ Battery: Compatible with the entire Ingersoll Rand IQV20™ platform, giving it an extra dose of power without weighing it down.
- Kit Includes: D5241 1/2" Hammer Drill, (2) BL2022 5.0Ah Batteries, 20V Battery Charger and Auxiliary Handle.
Includes: D5241 1/2" Hammer Drill, Auxiliary Handle, (2) BL2022 5.0Ah Batteries, 20V Battery Charger, Charger Cord, Manuals
Actuation/Throttle Type/Switch Type: Trigger
Blows per Min: 28000
Built-in Light: Yes
Chuck Capacity/Bit Capacity (in): 1/2
Chuck Type: Keyless Chuck
Clutch Settings: 24
Color: Grey
Configuration/Handle Type: Pistol Grip
Configuration/Handle Type: Auxiliary Handle
Drilling Capacity in Concrete: 3/8" (10mm)
Forward Torque setting 1 (ft-lb): 60
Forward Torque setting 1 (in-lb): 717
Forward Torque setting 1 (nm): 81
Housing Material: Impact and chemical-resistant composite housing
Max Free Speed (rpm): 1800
Max Torque (ft-lb): 92
Max Torque (in-lb): 1106
Max Torque (nm): 125
Motor: Brushless Motor
Nominal Drilling Capabilities (Wood Med or Frp): 1-3/8" (35mm)
Number of Batteries Required: 1
Power Source: Battery Powered
Product Length (in): 7.8
Product Width (in): 3.1
Product Height (in): 8.7
Product Height (in) (with Battery): 11
Product Weight (lb): 3.5
Product Weight (lb) (with Battery): 5
Reversible: Reversible
RPM Setting 1: 500
Side to Center Distance (in): 1.6
Side to Center Distance (mm): 41
Sound Pressure/Power Db(A): 84 / 92
Standards/Certifications: UL/CSA/EN/IEC 62841-1, UL/CSA/EN/IEC 62841-2-3
Vibration Level (m/s2): 4.2
Vibration Uncertainy K* (m/s2): 1.5
Voltage DC: 20
Warranty: 3-year tool, 2-year Battery, 3-year Charger
Similar IR
- D5140
Supersedes
- D5140-K2
- D5140-K1
$379.05
2" FLAT CHISEL - 24"
IR H3R-424-24
IR H3R-424-24
2" Scaling Chipping Hammer Chisel Steels, 24"L Hex Shank Round Collar
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.Includes: (5) Chipping Hammer Chisel Steels
Product Application and Uses: Designed for general demolition. For use with Ingersoll Rand W1A1, W2A1, W3A1, W4A1 chipping hammers.
Chisel Style: Scaling
Collar Type: Round
Collar Width (in): 1.125
Housing Material: Steel
Length Under Collar (in): 21.5
Product Length (in): 24
Product Width (in): 2
Product Weight (lb): 3.5
Shank Length (in): 2.5
Shank SIze (in): 0.58
Shank Type: Hex
For Use With
- W1A1
- W2A1
- W3A1
- W4A1
$79.00
Lock Spring For Grvd. Ret., QTY 1
IR HH1-1194
IR HH1-1194
Grooved Lock Spring for Ingersoll Rand K, A, D Series Chipping Hammers
Product Application and Uses: For use with all Ingersoll Rand grooved retainer K, A and D Series Chipping Hammers.Housing Material: Steel
Shank SIze (in): 0.5
Shank Type: Ingersoll Rand Shank
For Use With
- 1A1SA
- 1A2SA
- 2A1SA
- 2A2SA
- 2DA1SA
- 2DA2SA
- 3A1SA
- 3A2SA
- 3DA1SA
- 3DA2SA
- 4A1SA
- 4A2SA
- 4DA1SA
- 4DA2SA
$11.00
MOIL POINT - 12" .68 RD SHK OV COL, QTY 1
IR HH1-215M-12
IR HH1-215M-12
12" Moil Point Chipping Hammer Steel, Round Shank Oval Collar
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.Includes: (15) Moil Point Steels
Product Application and Uses: Designed for general demolition. For use with Ingersoll Rand 2DA2SA, 3DA2SA, 4DA2SA, 1A2SA, 2A2SA, 3A2SA, 4A2SA chipping hammers
Chisel Style: Moil Point
Collar Thickness (in): 0.813
Collar Type: Oval
Collar Width (in): 1.125
Housing Material: Steel
Length Under Collar (in): 9.625
Product Length (in): 12
Product Weight (lb): 1.75
Shank Length (in): 2.375
Shank SIze (in): 0.68
Shank Type: Round
For Use With
- 1A2SA
- 2A2SA
- 2DA2SA
- 3A2SA
- 3DA2SA
- 4A2SA
- 4DA2SA
$48.00
MERCURY ANGLE GRINDER
IR M2A120RP64
IR M2A120RP64
Angle Air Grinder, 4" Type 27 Wheel, 12,000 RPM, 1 HP, 3/8"-24 Thread, Rear Exhaust
Get fast material removal from a powerful tool that does more, is easier to use, and needs less maintenance. The M2 Series angle grinders feature more-powerful, lube-free motors and are available in various speeds and configurations to match virtually any job.Features And Benefits
- Power: With a powerful, lube-free 1 HP 12,000 rpm motor, you can remove materials quickly and with ease. Suited for heavier-duty grinding, cutting, cleaning, and polishing applications.
- Productivity: Speed-governed motor on this angle grinder help maximize the life of abrasives, increasing grinder efficiency and improving productivity.
- Durable: Built to last, these grinders have a steel angle head, aluminum-core housing with composite sleeve, and can withstand harsh environments and repeated drops.
- Ergonomic: Low profile throttle lever and ergonomic handle design reduces hand fatigue, increases comfort, and improves productivity.
- Efficient: Multi-position guard easily adjusts to four different positions without tools. Spindle lock allows faster, easier accessory changes. Easy disassembly for motor access. Back cap and muffler with easy rear access for cleaning.
- Reliable: You can count on this tool to perform reliably, especially thanks to a motor controller that helps maintain tool speed and prevents over speeding.
Includes: Tools, Large Wrench, Small Wrench, Piped away exhaust
Product Application and Uses: These are grinders are designed for material removal or cutting off using a rotated abrasive wheel for general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, construction, aerospace, and metal fabrication.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Free Speed (cfm): 20
Air Consumption @ Free Speed (l/min): 566
Air Consumption @ Load (cfm): 40
Air Consumption @ Load (l/min): 1133
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Arbor/Collet: 3/8"-24 Thread
Bearing Type: Ball Bearing
Bearing Type: Needle Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Duty Rating: Industrial Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 3.85
Housing Material: Aluminum core with composite sleeve
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.29
Product Weight (lb): 3.76
Rated Power (hp): 1
Right Angle Length (in): 8.06
Right Angle Length (mm): 205
Side to Center Distance (in): 5.86
Side to Center Distance (mm): 149
Sound Pressure/Power Db(A): 87 / 98
Speed Setting: Variable Speed
Vibration Level (m/s2): 5.1
Warranty: 1-year
Wheel Diameter (in): 4
Wheel Thickness (in): 1/4
Wheel Type: Type 27
Similar IR
- M2A135RP64
$748.65
ANGLE GRINDER, 12K, 5IN
IR M2A120RP105
IR M2A120RP105
Angle Air Grinder, 5" Type 27 Wheel, 12,000 RPM, 1 HP, 5/8"-11 Thread, Rear Exhaust
Features And Benefits- Power: With a powerful, lube-free 1 HP 12,000 rpm motor, you can remove materials quickly and with ease. Suited for heavier-duty grinding, cutting, cleaning, and polishing applications.
- Productivity: Speed-governed motor on this angle grinder help maximize the life of abrasives, increasing grinder efficiency and improving productivity.
- Durable: Built to last, these grinders have a steel angle head, aluminum-core housing with composite sleeve, and can withstand harsh environments and repeated drops.
- Ergonomic: Low profile throttle lever and ergonomic handle design reduces hand fatigue, increases comfort, and improves productivity.
- Efficient: Multi-position guard easily adjusts to four different positions without tools. Spindle lock allows faster, easier accessory changes. Easy disassembly for motor access. Back cap and muffler with easy rear access for cleaning.
- Reliable: You can count on this tool to perform reliably, especially thanks to a motor controller that helps maintain tool speed and prevents over speeding.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Free Speed (cfm): 17
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Bearing Type: Ball Bearing
Bearing Type: Needle Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Duty Rating: Industrial Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 3.39
Housing Material: Aluminum core with composite sleeve
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.29
Product Weight (lb): 3.89
Rated Power (hp): 1
Sound Pressure/Power Db(A): 87 / 98
Speed Setting: Variable Speed
Vibration Level (m/s2): 5
Warranty: 1-year
Wheel Diameter (in): 5
Wheel Thickness (in): 1/4
Wheel Type: Type 27
$810.75
Lock-Out Valve, 2000Series Npt, 1/2In - Npt
AA 104392-4
AA 104392-4
Lock-Out Valve, 2000Series Npt, 1/2In - Npt $112.70
Manifold Block Kit, 2000Series, 3/8 x 1/4
AA 104413-3-2
AA 104413-3-2
Manifold Block Kit, 2000Series, 3/8 x 1/4 $86.70
Manifold Block Kit, 2000Series, 1/2 x 3/8
AA 104413-4-3
AA 104413-4-3
Manifold Block Kit, 2000Series, 1/2 x 3/8 $86.70
Cushioned Air Cylinder, 1-1/2 Bore x 4In Stroke, Self Lube Lip, Sst Rod
AA 2415-1589-040
AA 2415-1589-040
Cushioned Air Cylinder, 1-1/2 Bore x 4In Stroke, Self Lube Lip, Sst Rod $466.60
