GRACO INC. S10595
GRACO INC. S10595 branded products
ULTRA SPRAYER, 490 XT, HI-BOY, NA
GG 19D521
GG 19D521
ULTRA SPRAYER, 490 XT, HI-BOY, NA
Ultra 490 XT Electric Airless Sprayer, Hi-Boy The Ultra 490 XT delivers an airless spray experience like no other. Featuring a 1.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, elevated performance, and the longest life pump in its class, the Ultra 490 XT is sure to become a staple in your fleet. Xtreme Productivity. Xtreme Reliability. Graco's Xtreme Torque Midsize Electric sprayers make it easier to get more work done in a day with increased flow and production rates. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- Only 31 lbs (Stand)
- Contractor PC Gun & RAC X LP 517 SwitchTip
$4,150.00
THERM-O-FLOW HOSE, HEATED, 10-FT, #8, 3000 PSI
GG 19M402
GG 19M402
THERM-O-FLOW HOSE, HEATED, 10-FT, #8, 3000 PSI
Graco 19M402 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.401
- Inside Diameter (mm): 10.2
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$3,150.00
THERM-O-FLOW HOSE, HEATED, 20-FT, #10, 3000 PSI
GG 19M407
GG 19M407
THERM-O-FLOW HOSE, HEATED, 20-FT, #10, 3000 PSI
Graco 19M407 20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 20
- Hose Length (m): 6.1
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$7,480.00
THERM-O-FLOW HOSE, HEATED, 25-FT, #10, 3000 PSI
GG 19M408
GG 19M408
THERM-O-FLOW HOSE, HEATED, 25-FT, #10, 3000 PSI
Graco 19M408 25 ft. (7.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 25
- Hose Length (m): 7.6
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$7,920.00
THERM-O-FLOW HOSE, HEATED, 10-FT, #10, 3000 PSI
GG 19M405
GG 19M405
THERM-O-FLOW HOSE, HEATED, 10-FT, #10, 3000 PSI
Graco 19M405 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$4,740.00
THERM-O-FLOW HOSE, HEATED, 30-FT, #10, 3000 PSI
GG 19M409
GG 19M409
THERM-O-FLOW HOSE, HEATED, 30-FT, #10, 3000 PSI
Graco 19M409 30 ft. (9.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 30
- Hose Length (m): 9.1
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$8,810.00
THERM-O-FLOW HOSE, HEATED, 15-FT, #10, 3000 PSI
GG 19M406
GG 19M406
THERM-O-FLOW HOSE, HEATED, 15-FT, #10, 3000 PSI
Graco 19M406 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 15
- Hose Length (m): 4.6
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$5,580.00
THERM-O-FLOW HOSE, HEATED, 3FT #12, 3000 PSI
GG 19M410
GG 19M410
THERM-O-FLOW HOSE, HEATED, 3FT #12, 3000 PSI
3 ft. (0.9 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
$2,720.00
THERM-O-FLOW HOSE, HEATED, 6-FT, #12, 3000 PSI
GG 19M411
GG 19M411
THERM-O-FLOW HOSE, HEATED, 6-FT, #12, 3000 PSI
Graco 19M411 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 6
- Hose Length (m): 1.8
- Inside Diameter (in): 0.617
- Inside Diameter (mm): 15.7
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$4,400.00
THERM-O-FLOW HOSE, HEATED, 15-FT, #12, 3000 PSI
GG 19M413
GG 19M413
THERM-O-FLOW HOSE, HEATED, 15-FT, #12, 3000 PSI
Graco 19M413 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 15
- Hose Length (m): 4.6
- Inside Diameter (in): 0.617
- Inside Diameter (mm): 15.7
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$6,540.00
THERM-O-FLOW HOSE, HEATED, 10-FT, #12, 3000 PSI
GG 19M412
GG 19M412
THERM-O-FLOW HOSE, HEATED, 10-FT, #12, 3000 PSI
Graco 19M412 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.617
- Inside Diameter (mm): 15.7
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$5,580.00
THERM-O-FLOW HOSE, HEATED, 20-FT, #12, 3000 PSI
GG 19M414
GG 19M414
THERM-O-FLOW HOSE, HEATED, 20-FT, #12, 3000 PSI
20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
$7,710.00
THERM-O-FLOW HOSE, HEATED, 25-FT, #12, 3000 PSI
GG 19M415
GG 19M415
THERM-O-FLOW HOSE, HEATED, 25-FT, #12, 3000 PSI
25 ft. (7.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 12 (0.617 in. / 15.7 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
$8,880.00
THERM-O-FLOW HOSE, HEATED, 10-FT, #16, 3000 PSI
GG 19M417
GG 19M417
THERM-O-FLOW HOSE, HEATED, 10-FT, #16, 3000 PSI
Graco 19M417 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.867
- Inside Diameter (mm): 22.0
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$6,360.00
THERM-O-FLOW HOSE, HEATED, 6-FT, #16, 3000 PSI
GG 19M416
GG 19M416
THERM-O-FLOW HOSE, HEATED, 6-FT, #16, 3000 PSI
6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
$6,060.00
THERM-O-FLOW HOSE, HEATED, 20-FT, #16, 3000 PSI
GG 19M419
GG 19M419
THERM-O-FLOW HOSE, HEATED, 20-FT, #16, 3000 PSI
Graco 19M419 20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 20
- Hose Length (m): 6.1
- Inside Diameter (in): 0.867
- Inside Diameter (mm): 22.0
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
$8,210.00
Therm-O-Flow Hose, Heated, 25-FT, #16, 3000 PSI
GG 19M420
GG 19M420
Therm-O-Flow Hose, Heated, 25-FT, #16, 3000 PSI
25 ft. (7.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
$9,390.00
THERM-O-FLOW HOSE, HEATED, 15-FT, #20, 3000 PSI
GG 19M422
GG 19M422
THERM-O-FLOW HOSE, HEATED, 15-FT, #20, 3000 PSI
Graco 19M422 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Hot Melt Heated Hose, No. 20 (1.13 in. / 28.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Hose Heating Type: Heated
- Hose Length (ft): 15
- Hose Length (m): 4.6
- Inside Diameter (in): 1.13
- Inside Diameter (mm): 28.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
$10,660.00
KIT, REGULATOR, PRESSURE
GG 19Y249
GG 19Y249
KIT, REGULATOR, PRESSURE
This item is no longer available. Please contact Graco Customer Service for replacement options.
Call for pricing
Kit, Cartridge, Fusion PC, 3 PK
GG 19Y301
GG 19Y301
Kit, Cartridge, Fusion PC, 3 PK
Fusion ProConnect Cartridge - 3 Pack Combined with a Fusion PC gun or Fusion AP gun outfitted with the ProConnect Retrofit Kit, the Fusion PC cartridge delivers you a perfect rebuild in seconds. This all-in-one cartridge head replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime. A single cartridge replaces the entire fluid section including o-rings Sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns
$668.00
Kit, Cartridge, Fusion PC, 5 Pk
GG 19Y308
GG 19Y308
Kit, Cartridge, Fusion PC, 5 Pk
Fusion ProConnect Cartridge - 5 Pack Combined with a Fusion PC gun or Fusion AP gun outfitted with the ProConnect Retrofit Kit, the Fusion PC cartridge delivers you a perfect rebuild in seconds. This all-in-one cartridge head replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime. A single cartridge replaces the entire fluid section including o-rings Sprays exactly like a Fusion AP Integrated A/B check valves all but eliminate the possibility of cross-over 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns
$981.00
CONTRACTOR PC COMPACT GUN, LTX, PKGD
GG 19Y349
GG 19Y349
CONTRACTOR PC COMPACT GUN, LTX, PKGD
Contractor PC Compact Airless Spray Gun with RAC X 517 SwitchTip The Contractor PC Compact airless spray gun provides all-day comfort and control, fast on-the-job gun rebuild capability and industry-proven Graco durability. Spray longer with 25% lighter weight and 25% smaller size than the Contractor gun with a 50% lighter trigger pull force. Compact design delivers maximum flexiblity for every application. The RAC X 517 SwitchTip provides a 10 inch spray pattern that is ideal for larger surfaces such as houses/buildings, walls and ceilings. Finish Jobs Faster with Less Fatigue- Delivers the most comfortable and lightest-weight spray experience ever
- Lightest trigger pull force at all spray pressures
- Lightest trigger hold force at all spray pressures
- 1-part, on-the-job gun rebuild
- Needle and all wear parts in one simple part
- Simply replace cartridge — it's like getting a brand new gun
$575.00
KIT, MUFFLER, RADIAL PISTON AIR
GG 19Y509
GG 19Y509
KIT, MUFFLER, RADIAL PISTON AIR
Radial Piston Air Motor Muffler kit, set of 3
$33.00
KIT, RETRO, 5-10 GA PAIL, RP MTR
GG 19Y592
GG 19Y592
KIT, RETRO, 5-10 GA PAIL, RP MTR
Radial Piston Air Motor Retrofit Kit for 5 gallon (18 L) or 10 gallon (38 L) pail agitators. Pail cover, agitator shaft and blade not included. This kit makes it easy to replace an existing rotary vane motor on a 5 gallon (18 liter) or 10 gallon (38 L) pail agitator with a radial piston air motor. For wood (top coat, primer) and general finishing applications Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications. Air line lubrication not required Easy to maintain and service Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA Pail cover, agitator shaft and blade sold separately
$1,645.00
SOLOTECH ST10 PUMP, I10-MPM-NR-SS-A1-A1-0
GG 19Z001
GG 19Z001
SOLOTECH ST10 PUMP, I10-MPM-NR-SS-A1-A1-0
Graco 19Z001 SoloTech™ i10 Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & BLDC Motor
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: Stainless Steel
- Flow Rate (GPM): 0.67
- Gear Ratio: 37.66:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: Rubber
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.017
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Brushless DC
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 53
- Overall Height (in): 21
- Overall Height (mm): 533
- Overall Length (cm): 41
- Overall Length (in): 16.3
- Overall Length (mm): 414
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 120
- Power Rating (kW): 89.48
- Power Rating (W): 89484
- Pump Speed (RPM): 2-93
$8,490.00
SOLOTECH ST10 PUMP, I10-LAC-CS-HS-A1-A1-0
GG 19Z012
GG 19Z012
SOLOTECH ST10 PUMP, I10-LAC-CS-HS-A1-A1-0
SoloTech™ i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & AC MotorGraco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$7,940.00
SOLOTECH ST10 PUMP, I10-MPM-CS-PV-A1-A1-0
GG 19Z003
GG 19Z003
SOLOTECH ST10 PUMP, I10-MPM-CS-PV-A1-A1-0
Graco 19Z003 SoloTech™ i10 Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & BLDC Motor
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Application: Peristaltic Hose Pumps for Industrial Metering and Transfer- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: i10
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 0.67
- Gear Ratio: 37.66:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.4
- Hose Diameter (mm): 10
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 0.95
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.5
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.5
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 0.017
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: Brushless DC
- Outlet Size (cm): 9
- Outlet Size (in): 3.54
- Outlet Size (mm): 90
- Overall Height (cm): 53
- Overall Height (in): 21
- Overall Height (mm): 533
- Overall Length (cm): 41
- Overall Length (in): 16.3
- Overall Length (mm): 414
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 120
- Power Rating (kW): 89.48
- Power Rating (W): 89484
- Pump Speed (RPM): 2-93
$8,870.00
SOLOTECH ST23 PUMP, I23-MPM-EP-SS-A1-A1-0
GG 19Z036
GG 19Z036
SOLOTECH ST23 PUMP, I23-MPM-EP-SS-A1-A1-0
SoloTech™ i23 EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & BLDC MotorGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$9,640.00
SOLOTECH ST23 PUMP, I23-MPM-EP-PV-A1-A1-0
GG 19Z037
GG 19Z037
SOLOTECH ST23 PUMP, I23-MPM-EP-PV-A1-A1-0
SoloTech™ i23 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC MotorGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$9,930.00
SOLOTECH ST23 PUMP, I23-HAC-EP-SS-A1-A1-0
GG 19Z059
GG 19Z059
SOLOTECH ST23 PUMP, I23-HAC-EP-SS-A1-A1-0
SoloTech™ i23 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC MotorGraco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$8,110.00
SOLOTECH ST26 PUMP, I26-HAC-EP-PV-A1-A1-0
GG 19Z079
GG 19Z079
SOLOTECH ST26 PUMP, I26-HAC-EP-PV-A1-A1-0
SoloTech™ i26 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, PVDF BarbGraco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$11,880.00
SOLOTECH ST26 PUMP, I26-HAC-BN-SS-A1-A1-0
GG 19Z076
GG 19Z076
SOLOTECH ST26 PUMP, I26-HAC-BN-SS-A1-A1-0
SoloTech™ i26 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & AC MotorGraco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution
$11,560.00
SOLOTECH ST30 PUMP, HAC/NR/SS/A1/A1/0/
GG 19Z113
GG 19Z113
SOLOTECH ST30 PUMP, HAC/NR/SS/A1/A1/0/
SoloTech™ i30 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & AC MotorGraco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
Pump Construction
- Cast aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
Electric Motor
- Choose between AC and Brushless DC models
- Multiple gearbox offerings to meet your exact flow rate needs
- Hazardous location motors available
Brushless DC Motor
- Batch dispense mode
- Wider turndown ratio allows for larger flow range
- Maintenance reminders
Single Roller Design
- Single roller design improves hose life by reducing the number of compressions, temperature and friction
- Metallic roller with bearings provides constant compression and flow
Removable Cover
- Aluminum covers with larger sight window makes it easy to access and see internal parts
- Optional leak detector kit mounts on cover
Hose Barb Assembly
- Easy to install or remove – no special tools needed
- Available with PVDF and SST barbs options
- Floating flange for easy installation
$14,270.00
Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old
GG 2000187
GG 2000187
Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old
$1,640.00
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old
GG 2000188
GG 2000188
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old
$1,905.00
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200
GG 2000189
GG 2000189
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200
$2,520.00
Therm-O-Flow Kit, Wiper, Seal, Green, Black, 200
GG 2000190
GG 2000190
Therm-O-Flow Kit, Wiper, Seal, Green, Black, 200
$1,640.00
SOLOTECH ST30 PUMP, HAC/CS/PV/A1/A1/0/
GG 19Z117
GG 19Z117
SOLOTECH ST30 PUMP, HAC/CS/PV/A1/A1/0/
Graco 19Z117 SoloTech™ i30 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor
Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
- Pump Construction
- Electric Motor
- Brushless DC Motor
- Removable Cover
- Hose Barb Assembly
- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Extended hose life - only one hose compression per revolution
Easy to install or remove – no special tools needed
Available with PVDF and SST barbs options
Floating flange for easy installation
- Model: SoloTech
- Series: i30
- Application: Industrial
- Barb Material: PVDF
- Flow Rate (GPM): 16
- Gear Ratio: 19.5:1
- Hose Diameter (cm): 3
- Hose Diameter (in): 1.2
- Hose Diameter (mm): 30
- Hose Material: CSM
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 3.2
- Inlet Size (in): 1-1/4
- Inlet Size (mm): 32
- Inlet Thread Type: Flange
- Maximum Flow Rate (GPM): 15.8
- Maximum Flow Rate (L/min): 59.8
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 9
- Maximum Fluid Pressure (kPa): 900
- Maximum Fluid Pressure (psi): 125
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Flow Rate (GPM): 2.675
- Minimum Storage Temperature (°C): -10
- Minimum Storage Temperature (°F): 14
- Motor Type: High Speed AC
- Outlet Size (cm): 12.5
- Outlet Size (in): 4.92
- Outlet Size (mm): 125
- Overall Height (cm): 77
- Overall Height (in): 30.3
- Overall Height (mm): 770
- Overall Length (cm): 67
- Overall Length (in): 26.5
- Overall Length (mm): 673
- Overall Width (cm): 59
- Overall Width (in): 23.3 <
Aluminum covers with larger sight window makes it easy to access and see internal parts
Optional leak detector kit mounts on cover
- Hose Barb Assembly
Batch dispense mode
Wider turndown ratio allows for larger flow range
Maintenance reminders
- Removable Cover
Choose between AC and Brushless DC models
Multiple gearbox offerings to meet your exact flow rate needs
Hazardous location motors available
- Brushless DC Motor
Cast aluminum housing reduces pump weight
Improved mounting flexibility with adjustable feet
- Electric Motor
$15,110.00
Stellair Auto Manifold, Rear Fluid Inlet, with Inch Threads
GG 2000230
GG 2000230
Stellair Auto Manifold, Rear Fluid Inlet, with Inch Threads
Graco 2000230 Stellair Auto Manifold, Rear Fluid Inlet, with Inch Threads
Rear fluid inlet manifold connects a Stellair Auto air spray gun to an automated finishing system’s robot, reciprocator, or flat line machine.
Application: Manifold sets automatic air spray gun in place to produce stellar results for industrial finishing of automotive components, industrial metal and plastic parts, wood products and architectural structures.- Stellair Auto manifold has the same tool center point as legacy AirPro Auto air spray guns, making it easy to upgrade paint line and spray booth equipment.
- Rear port fluid inlet manifold effectively positions a Stellair Auto air spray gun on a robot or in a compact space.
- Durable and lightweight construction reduces equipment wear, especially on high speed production lines.
- Fan adjustment valve fine-tunes spray pattern widths according to the size and geometry of the parts being coated.
$589.00
Manifold, Stellair, ADJ, Side Inlet, Inch
GG 2000226
GG 2000226
Manifold, Stellair, ADJ, Side Inlet, Inch
Stellair Auto Manifold, Side Fluid Inlet, with Inch Threads and Fan Adjustment Valve Side fluid inlet manifold connects a Stellair Auto air spray gun to an automated finishing system’s robot, reciprocator, or flat line machine. Manifold sets automatic air spray gun in place to produce stellar results for industrial finishing of automotive components, industrial metal and plastic parts, wood products and architectural structures. Stellair Auto manifold has the same tool center point as legacy AirPro Auto air spray guns, making it easy to upgrade paint line and spray booth equipment. Durable and lightweight construction reduces equipment wear, especially on high speed production lines. Two-screw, gun-to-manifold connection simplifies automatic air spray gun removal and maintenance.
$353.00
Kit, Air Cap, HVLP, General Industry
GG 2000291
GG 2000291
KIT, AIR CAP, HVLP, GENERAL INDUSTRY
$147.50
KIT, MODBUS-ETHERNET IP, PSM, PCB
GG 2000362
GG 2000362
KIT, MODBUS-ETHERNET IP, PSM, PCB
PSM Modbus PCB EtherNet/IP Module The Precision Shot Meter (PSM) is a high-accuracy, single-component dispensing system designed for precise and repeatable dispensing of a wide range of materials. Available in multiple sizes to meet the needs of your specific application, from the smallest detail work to the largest jobs, the PSM system delivers shot accuracy of +/-1%. Graco’s PSM line offers greater accuracy, less downtime and easier maintenance, facilitating greater productivity and ultimately bottom-line results. The PSM, one component precision shot meter offers the same repeatable accuracy that automotive, electronics, and telecommunications manufacturers need. Ambient and warm melt availability and shot size ranging from 0.1cc to 200cc covers industrial materials and chemistries like Epoxy, TIMS, Sulfide, Silicone, Polyurethane, and more. Lightweight and compact design is ideal for robot and motion table mounting. Easy PLC integration with options for I/O, Profinet or EtherNet/IP. First-in-first-out fluid path eliminates dead zones and downtime due to clogged valves. Servo motor controlling dispense along with a high precision meter ensures +/- 1% shot repeatability. The materials go where you need them to go. Every time.
$3,150.00
Kit, Mixer, Bell Mount, 1/4 X 24 EL, 50PK
GG 2001992
GG 2001992
Kit, Mixer, Bell Mount, 1/4 X 24 EL, 50PK
$443.00
Kit, Mixer, Bell Mount, 3/8 X 40 EL, 1000 PK
GG 2002005
GG 2002005
KIT,MIXER, BELL MOUNT, 3/8 X 40 EL, 1000 PK
$12,370.00
Kit, Mixer, Bell Mount, 1/2 X 24 EL, 50PK
GG 2002011
GG 2002011
Kit, Mixer, Bell Mount, 1/2 X 24 EL, 50PK
$572.00
Kit, Mixer, Bell Mount, 3/8 x 40 El, 50 Pk
GG 2002004
GG 2002004
Kit, Mixer, Bell Mount, 3/8 x 40 El, 50 Pk
$1,015.00
Kit, Mixer, Bell Mount, 1/2 x 36 El, 50 Pk
GG 2002012
GG 2002012
Kit, Mixer, Bell Mount, 1/2 x 36 El, 50 Pk
$773.00
Kit, Mixer, Bell Mount, 1/4 X 24 EL, 1000PK
GG 2001993
GG 2001993
Kit, Mixer, Bell Mount, 1/4 X 24 EL, 1000PK
$3,980.00
Kit, Mixer, Bell Mount, 1/2 X 36 EL, w/Washer, 50 PK
GG 2002015
GG 2002015
Kit, Mixer, Bell Mount, 1/2 X 36 EL, w/Washer, 50 PK
$837.00
CORD, CID1 BARRIER TYPE W GLAND 3 WIRE
GG 2001046
GG 2001046
CORD, CID1 BARRIER TYPE W GLAND 3 WIRE
Power Cord for Hazardous Location F-6 Motor 1-inch Industrial QUANTM Pumps
$165.50
STELLAIR GUN, CONV (.030)
GG 2004146
GG 2004146
STELLAIR GUN, CONV (.030)
Stellair Air Spray Gun, Conventional, 0.030 in (0.8 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
Mixer, Assembly, Bell Mount, 3/8X24El, 50 Pk
GG 2001999
GG 2001999
Mixer, Assembly, Bell Mount, 3/8X24El, 50 Pk
$500.00
STELLAIR GUN, CONV (.042)
GG 2004147
GG 2004147
STELLAIR GUN, CONV (.042)
Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, CONV (.086)
GG 2004149
GG 2004149
STELLAIR GUN, CONV (.086)
Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, HVLP (.042)
GG 2004151
GG 2004151
STELLAIR GUN, HVLP (.042)
Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, HVLP (.070)
GG 2004153
GG 2004153
STELLAIR GUN, HVLP (.070)
Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
Stellair Gun, Comp (.055)
GG 2004155
GG 2004155
Stellair Gun, Comp (.055))
Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.070) SST TIP
GG 2004158
GG 2004158
STELLAIR GUN, CONV (.070) SST TIP
Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), General Industry, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
STELLAIR GUN, CONV (.055) SST TIP
GG 2004157
GG 2004157
STELLAIR GUN, CONV (.055) SST TIP
Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), General Industry, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
STELLAIR GUN, HVLP (.055) SST TIP
GG 2004159
GG 2004159
STELLAIR GUN, HVLP (.055) SST TIP
Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), General Industry, SST TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, HVLP (.070) SST TIP
GG 2004160
GG 2004160
STELLAIR GUN, HVLP (.070) SST TIP
Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, SST TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
Kit, 7250 PSI, Gun, Hose, Tip, Filter
GG 2002447
GG 2002447
Kit, 7250 PSI, Gun, Hose, Tip, Filter
$1,100.00
STELLAIR GUN, COMP (.042)
GG 2004154
GG 2004154
STELLAIR GUN, COMP (.042)
Stellair Air Spray Gun, Compliant, 0.042 in (1.1 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE
GG 2004163
GG 2004163
STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE
Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), Automotive, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
Therm-O-Flow, Kit, Wiper, Seal, Tof20, Green
GG 2000706
GG 2000706
Therm-O-Flow, Kit, Wiper, Seal, Tof20, Green
$661.00
STELLAIR GUN, COMP (.055) SST TIP
GG 2004161
GG 2004161
STELLAIR GUN, COMP (.055) SST TIP
Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), General Industry, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, CONV (.055) SST TIP, AUTOMOVTIVE
GG 2004164
GG 2004164
STELLAIR GUN, CONV (.055) SST TIP, AUTOMOVTIVE
Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), Automotive, SST TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
STELLAIR GUN, CONV (.070), CERAMIC
GG 2004167
GG 2004167
STELLAIR GUN, CONV (.070), CERAMIC
Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), High Solids, High Wear Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$735.00
STELLAIR GUN, CONV (.110)
GG 2004150
GG 2004150
STELLAIR GUN, CONV (.110)
Stellair Air Spray Gun, Conventional, 0.110 in (2.8 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, CONV (.070)
GG 2004148
GG 2004148
STELLAIR GUN, CONV (.070)
Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
PUMP, G-MINI, OIL, 2L, AC, NC
GG 2000639
GG 2000639
PUMP, G-MINI, OIL, 2L, AC, NC
G-Mini® Oil Lubrication Pump, AC, 2 Liter Make the most of your space, budget and machines. The new full-featured G-Mini offers reliable lubrication in a small footprint to fit more types of machines. Use it to simplify everyday maintenance, extend lifecycles and optimize uptime. It’s rugged and tough, perfect for handling the daily, 24/7 rigors of any job, both big and small. Best of all, it comes with a modest price tag – boosting your productivity and profitability. DIN Form-A power connection (cable sold separately)2 liter reservoir option
One Pump Element - 0.18 in3/min (3 cm3/min), 4,100 psi (280 bar)
No Controller: pair with either an external controller or PLC Rugged Construction - Designed to withstand the harshest of environments; IP69K rated
$1,220.00
STELLAIR GUN, HVLP (.070), CERAMIC
GG 2004169
GG 2004169
STELLAIR GUN, HVLP (.070), CERAMIC
Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), High Solids, High Wear TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
High wear packing, carbide needle and carbide nozzle tip are strengthened to effectively apply abrasive materials. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$893.00
STELLAIR Gun, Conv. (.086), Ceramic
GG 2004168
GG 2004168
STELLAIR Gun, Conv. (.086), Ceramic
Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), High Solids, High Wear TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
High wear packing, carbide needle and carbide nozzle tip are strengthened to effectively apply abrasive materials. Conventional is the traditional air spray method, producing Class A, automotive finish quality.
High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
High wear air cap maintains high throughput while spraying ultra violet (UV) coatings and other abrasive material with high solids and low volatile organic compounds (VOCs).
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$735.00
STELLAIR GUN, HVLP (.086), CERAMIC
GG 2004170
GG 2004170
STELLAIR GUN, HVLP (.086), CERAMIC
Stellair Air Spray Gun, HVLP, 0.086 in (2.2 mm), High Solids, High Wear Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results. High wear packing, carbide needle and carbide nozzle tip are strengthened to effectively apply abrasive materials.High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$893.00
STELLAIR GUN, HVLP (.055), AUTOMOVTIVE
GG 2004165
GG 2004165
STELLAIR GUN, HVLP (.055), AUTOMOVTIVE
Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Automotive, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, HVLP (.042), TRIM
GG 2004175
GG 2004175
STELLAIR GUN, HVLP (.042), TRIM
Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), Trim, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Trim air cap produces a well-defined edge with minimal overspray, essential for selective applications like edges, trim, and dielectrics.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.055), WIDE PATTERN
GG 2004180
GG 2004180
STELLAIR GUN, CONV (.055), WIDE PATTERN
Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Wide pattern air cap sprays consistent coverage over large surfaces.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, HVLP (.040), WOOD
GG 2004179
GG 2004179
STELLAIR GUN, HVLP (.040), WOOD
Stellair Air Spray Gun, HVLP, 0.040 in (1.0 mm), Wood, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Wood air cap applies low viscosity material, such as stains and toners, used for wood finishing.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, COMP (.070) SST TIP
GG 2004162
GG 2004162
STELLAIR GUN, COMP (.070) SST TIP
Stellair Air Spray Gun, Compliant, 0.070 in (1.8 mm), General Industry, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
KIT, AIR CAP, COMP, GENERAL INDUSTRY
GG 2000292
GG 2000292
KIT, AIR CAP, COMP, GENERAL INDUSTRY
$147.50
STELLAIR GUN, COMP (.070), CERAMIC
GG 2004171
GG 2004171
STELLAIR GUN, COMP (.070), CERAMIC
Stellair Air Spray Gun, Compliant, 0.070 in (1.8 mm), High Solids, High Wear Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results. High wear packing, carbide needle and carbide nozzle tip are strengthened to effectively apply abrasive materials.Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$893.00
STELLAIR GUN, CONV (.040), WOOD
GG 2004178
GG 2004178
STELLAIR GUN, CONV (.040), WOOD
Stellair Air Spray Gun, Conventional, 0.040 in (1.0 mm), Wood, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Wood air cap applies low viscosity material, such as stains and toners, used for wood finishing.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, COMP (.055), AUTOMOVTIVE
GG 2004166
GG 2004166
STELLAIR GUN, COMP (.055), AUTOMOVTIVE
Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), Automotive, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00