Other Pumps
HUSKY SYSTEM, BULK ANTIFREEZE/WWS
GG 244680
GG 244680
HUSKY SYSTEM, BULK ANTIFREEZE/WWS
Husky 1050 – Single Inlet Bulk Antifreeze and Windshield Solvent Transfer PackagesThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover One-Piece Center Section - Eliminates air leaks for more efficient operation Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation Multiple Ports - Increased number of ports for installation flexibility Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability) Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040
$4,020.00
HUSKY SYSTEM, ANTI-FREEZE, WWS
GG 244682
GG 244682
HUSKY SYSTEM, ANTI-FREEZE, WWS
Husky 716 – Single Inlet Bulk Antifreeze and Windshield Solvent Transfer PackagesThe Husky 716 air operated diaphragm pump delivers up to 16 gpm (60.6 lpm) of fluid and features center and end porting options.
Ideal for bulk antifreeze and windshield solvent transfer. Center- and end-porting No mechanical seals which causes fluid leaks or failures Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks 3/4 in (19.05 mm) center- and end-porting No seals to leak or fail Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks
$2,410.00
PROMIX 2KE PROPORTIONER, SYSTEM, PUMP
GG 24F092
GG 24F092
PROMIX 2KE PROPORTIONER, SYSTEM, PUMP
ProMix 2KE Proportioner, electric, 3:1 Air Spray Merkur & Merkur Bellows pumps, screen reporting, for non-hazardous location The ProMix 2KE is an entry level, compact, easy to use plural component system allowing you to mix on-demand for all spray technologies. Designed for multi-color, two component, in-booth applications Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
$32,230.00
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
GG 24X423
GG 24X423
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
ChemSafe 1040 Air Operated Double Diaphragm Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 37.5 gpm (142 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
$9,580.00
PROMIX 2KE PROPORTIONER, METER, ACID
GG 24Z016
GG 24Z016
PROMIX 2KE PROPORTIONER, METER, ACID
Graco 24Z016 ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, non intrinsically safe AC powered
The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.
- Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
- Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
- Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter
- Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
- Model: ProMix
- Series: 2KE
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 3 Color, 1 Catalyst, Non Intrinsically Safe AC Powered
- Material Type: Two Component
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Fluid Viscosity (cP): 5000
- Maximum Fluid Viscosity (cP): 5000
- Maximum Number of Colors: Up to 3
- Maximum Working Pressure (bar): 206.8
- Maximum Working Pressure (kPa): 20680
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Measuring Type: Meter
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: N/A
- Number of Colors: 3
- Number of Resin Colors: 3
- Power Source: Electric
- Proportioning Type: Manual Electronic
- Pump Ratio: Meter only
$32,580.00
LINELAZER SPRAYER, V, 250SPS, 2 GUN, 2PBS, LSR
GG 25D340
GG 25D340
LINELAZER SPRAYER, V, 250SPS, 2 GUN, 2PBS, LSR
LineLazer V 250SPS HP Reflective Series Self-Propelled Gas Hydraulic Airless Line Striper, 2 Auto Guns, 2 Tanks, LazerGuide 3000 With exclusive automatic paint guns and hydraulic power, the LineLazer V 250SPS HP Reflective Series is a self-propelled system with reflective bead capability designed for large, heavy-duty line striping jobs including parking lots and road jobs. The HP Reflective Series adds superior bead application capability to the HP Automatic Series feature set, which includes automatic line production capability, including skip-lines, as well as real-time job performance data for proof-of-job requirements. Pressurized EZ Bead System- Superior Bead Application Performance
- Ensures proper bead flow and paint penetration
- Dual bead tanks hold up to 120 lbs each
- Automatically Stripe Skip-Lines
- Reduce operator fatigue — push button line production
- Quality solenoid driven system
- Easier, laser-straight lines
- Longer distance accuracy
- Highly-visible laser guise
- Faster, simple operation
- Striping Information At-A-Glance
- Simple to use and easy to see in all conditions
- Less Refilling
- Extended striping time with large capacity hopper
- Reliable, Easy-to-Start Power
- Contractor-preferred — excellent power and proven reliability
- Oil Alert shuts down engine to prevent damage if oil level drops too low
- Fast starting
- Easy Gun Adjustments
- Perfect gun alignment every time with easy-to-use guide mark system
- 2-gun capability with QuikSelect gun selector
- Straighter long lines
- Use up to six guns
- Self-Centering Front Wheel
- Easy Handlebar Adjustment
- Endurance Chromex Pump
- High-Efficiency Hydraulic Motor
- High-Capacity Cooling System
- Easy Out Pump Filter
$54,690.00
E-FLO IQ SYSTEM, IQU, TDM, 1H20, 2H20
GG 26B560
GG 26B560
E-FLO IQ SYSTEM, IQU, TDM, 1H20, 2H20
Tandem E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s, two 20 ft hoses, 20 ft hose (WIP) The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity. Tandem Heated E-Flo iQ Urethane Supply Sytem- Delivers consistent control and accurate performance
- Quiet electric servo-driven motor for lower sound levels
- Provides continuous dispensing without the need to reload
- Check-Mate Severe Duty lower for long life and reliable material movement
- Graco heated hoses are insulated for an accurate and uniform material temperature.
- Equipped with a total of 60 ft of hose (two 20 ft hoses for pumps to manifold and one 20 ft hose from manifold to valve)
- Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
- Delivers reliable and consistent beads in high flow applications
- Compact and lightweight design allows for lower payload
- Rotating valve prevents twining and reduces wear
- Remote mounted solenoid
- The communication gateway module (CGM) has integrated mapping of all of the programming data.
- Available protocols include EtherNet I/P, PROFINET, DeviceNet, or PROFIBUS.
$159,200.00
MODU-FLO PUMP, ASSY, AL-50
GG 563308
GG 563308
MODU-FLO PUMP, ASSY, AL-50
Graco 563308 Modu-Flo® AL-50 Pneumatic Pump without Reservoir
Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.
- Easy to standardize on components and reduce inventory
- Adjustable pump output for fast, convenient customizing
- Lubriquip part number 521-000-041
- Model: Modu-Flo
- Series: AL-50
- Application: In-Plant Machinery
- Compatible Material: Oil, Grease
- Compatible Metering Device: Series Progressive
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Cycle Rate (CPM): 30
- Maximum Fluid Output Pressure (bar): 241
- Maximum Fluid Output Pressure (psi): 3500
- Maximum Fluid Output Pressure (bar): 241
- Maximum Fluid Output Pressure (psi): 3500
- Maximum NLGI Grade: #2
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20680
- Maximum Working Pressure (MPa): 31
- Maximum Working Pressure (psi): 3000
- Overall Depth (cm): 8.1
- Overall Depth (in): 3.188
- Overall Depth (mm): 81
- Overall Height (cm): 8.1
- Overall Height (in): 3.188
- Overall Height (mm): 81
- Overall Width (cm): 32.5
- Overall Width (in): 12.812
- Overall Width (mm): 325
- Power Type: Pneumatic
$1,380.00
EFR SYSTEM, 240V, ADM, 50, 100, CS
GG EFR2AJRC
GG EFR2AJRC
EFR SYSTEM, 240V, ADM, 50, 100, CS
Graco EFR2AJRC 2:1 EFR Metering System 240 Volt with 50cc Low Volume and 100cc High Volume Z pumps Carbon Steel Manifold
The Graco Electric Fixed Ratio (EFR) system is a meter, mix and dispense system for two component sealant and adhesive delivery. Ideal for applications requiring precision dispense, the EFR provides superior control over material and dispensing of gaskets, beads, shots and potting applications. Trust in the EFR, which is accurate, versatile and easy to use.
- Model: EFR
Call for pricing
EFR SYSTEM, 240V, ADM, NO PUMPS
GG EFR2AXXX
GG EFR2AXXX
EFR SYSTEM, 240V, ADM, NO PUMPS
EFR Metering System, 240 Volt with ADM & No Pumps The Graco Electric Fixed Ratio (EFR) system is a meter, mix and dispense system for two component sealant and adhesive delivery. Ideal for applications requiring precision dispense, the EFR provides superior control over material and dispensing of gaskets, beads, shots and potting applications. Trust in the EFR, which is accurate, versatile and easy to use.
$35,230.00
HIGH-FLO PUMP, 2200/1500, LOW DT, OPN, NPT
GG JC30M9
GG JC30M9
HIGH-FLO PUMP, 2200/1500, LOW DT, OPN, NPT
High-Flo 4-Ball Pump, CS, 3:1, Low Noise Exhaust, DataTrak, Open Wet Cup Lower, NPT Fittings, Ultralife Rod/Cylinder Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Rugged body armor, won’t rust or dent De-icing controls eliminate stalling Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints DataTrak tracks material usage, monitors and protects your pump
$12,240.00
HIGH-FLO PUMP, 2200/1000, LOW N, OPN, NPT
GG JC40L9
GG JC40L9
HIGH-FLO PUMP, 2200/1000, LOW N, OPN, NPT
High-Flo 4-Ball Pump, CS, 4:1, Low Noise Exhaust, Open Wet Cup Lower, NPT Fittings, Ultralife Rod/Cylinder Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Rugged body armor, won’t rust or dent De-icing controls eliminate stalling Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
$10,140.00
KING SPRAYER, 30:1, H-P, BF, HD, COMP
GG K30FH1
GG K30FH1
KING SPRAYER, 30:1, H-P, BF, HD, COMP
King 30:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, XTR-5+, 50 ft (15 m) Hose, 6 ft (1.8 m) WhipHigh-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.
Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatingsSimple Maintenance
- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance.
Improved Icing Performance
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
Less Pulsation
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
Call for pricing
KING SPRAYER, 40:1, H-P, BF, HD, BARE
GG K40FH0
GG K40FH0
KING SPRAYER, 40:1, H-P, BF, HD, BARE
King 40:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon KitHigh-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.
Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatingsSimple Maintenance
- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance.
Improved Icing Performance
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
Less Pulsation
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
Call for pricing
KING SPRAYER, 60:1, H-P, NF, HD, COMP
GG K60NH1
GG K60NH1
KING SPRAYER, 60:1, H-P, NF, HD, COMP
King 60:1 Sprayer, Non-Filter, Heavy Duty Cart, Air Controls, Siphon Kit, XTR-7+, 50 ft (15 m) Hose, 6 ft (1.8 m) WhipHigh-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.
Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatingsSimple Maintenance
- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance.
Improved Icing Performance
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
Less Pulsation
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
Call for pricing
LOWER, CHEMICAL, 040, S8
GG L040S8
GG L040S8
LOWER, CHEMICAL, 040, S8
Z-Pump, 40 cc, Elite, S8 Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications. Precision control eliminates pressure spikes and guarantees on ratio dispense. Elite high-wear pump seals reduce maintenance downtime and repair costs.
$20,060.00
LOWER, CHEMICAL, 050, SST, UCUP
GG L050S4
GG L050S4
LOWER, CHEMICAL, 050, SST, UCUP
Z-Pump, 50 cc, Severe Duty, S4 Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives. Precision control eliminates pressure spikes and guarantees on ratio dispense. Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
$11,600.00
LOWER, CHEMICAL, 080, SST, UCUP
GG L080S4
GG L080S4
LOWER, CHEMICAL, 080, SST, UCUP
Z-Pump, 80 cc, Severe Duty, S4 Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives. Precision control eliminates pressure spikes and guarantees on ratio dispense. Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
$11,600.00
LOWER, CHEMICAL, 080, S8
GG L080S8
GG L080S8
LOWER, CHEMICAL, 080, S8
Z-Pump, 80 cc, Elite, S8 Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications. Precision control eliminates pressure spikes and guarantees on ratio dispense. Elite high-wear pump seals reduce maintenance downtime and repair costs.
$20,290.00
PROMIX 2KS PROPORTIONER MANUAL
GG MD1212
GG MD1212
PROMIX 2KS PROPORTIONER MANUAL
Graco MD1212 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 2 catalysts LP, and 2 Air Flow Switches
Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.
- Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
- Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Advanced web interface provides consolidated system management and reporting
- Model: ProMix
- Series: 2KS
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Applicator Type: Manual
- Component Type: Two Component
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.635
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Size (mm): 6.35
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Flush Type: Air/Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Material Type: Two Component
- Maximum Flow Rate (cc/min): 3790
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.79
- Maximum Fluid Viscosity (cP): 3000
- Maximum Fluid Viscosity (cP): 3000
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 12
- Maximum Working Pressure (bar): 275.8
- Maximum Working Pressure (kPa): 27580
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
- Measuring Type: Meter
- Meter Type: G3000
- Minimum Flow Rate (cc/min): 75
- Minimum Flow Rate (GPM): 0.02
- Minimum Flow Rate (L/min): 0.075
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 2
- Number of Color Valves: 4 Valves
- Number of Colors: 4
- Number of Resin Colors: 4
- Power Source: Electric
- Proportioner Type: Manual
- Proportioning Type: Manual Electronic
$73,280.00
PROMIX 2KS PROPORTIONER MANUAL
GG MD1303
GG MD1303
PROMIX 2KS PROPORTIONER MANUAL
Graco MD1303 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 7 Colors LP, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box
Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.
- Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
- Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Advanced web interface provides consolidated system management and reporting
- Model: ProMix
- Series: 2KS
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Applicator Type: Manual
- Component Type: Two Component
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Flush Type: Air/Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Material Type: Two Component
- Maximum Flow Rate (cc/min): 3790
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.79
- Maximum Fluid Viscosity (cP): 3000
- Maximum Fluid Viscosity (cP): 3000
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 12
- Maximum Working Pressure (bar): 275.8
- Maximum Working Pressure (kPa): 27580
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
- Measuring Type: Meter
- Meter Type: G3000
- Minimum Flow Rate (cc/min): 75
- Minimum Flow Rate (GPM): 0.02
- Minimum Flow Rate (L/min): 0.075
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: 7 Valves
- Number of Colors: 7
- Number of Resin Colors: 7
- Power Source: Electric
- Proportioner Type: Manual
- Proportioning Type: Manual Electronic
$75,670.00
PROMIX 2KS PROPORTIONER MANUAL
GG MD1504
GG MD1504
PROMIX 2KS PROPORTIONER MANUAL
ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors HP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting
$72,550.00
PROMIX 2KS PROPORTIONER, MANUAL
GG MD1633
GG MD1633
PROMIX 2KS PROPORTIONER, MANUAL
Graco MD1633 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 4 Colors HP, 2 Catalysts HP, 1 Air Flow Switch with 1 Gun Flush Box
Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.
- Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
- Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Advanced web interface provides consolidated system management and reporting
- Model: ProMix
- Series: 2KS
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Applicator Type: Manual
- Component Type: Two Component
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Flush Type: Air/Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Material Type: Two Component
- Maximum Flow Rate (cc/min): 3790
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.79
- Maximum Fluid Viscosity (cP): 3000
- Maximum Fluid Viscosity (cP): 3000
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 12
- Maximum Working Pressure (bar): 275.8
- Maximum Working Pressure (kPa): 27580
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
- Measuring Type: Meter
- Meter Type: G3000
- Minimum Flow Rate (cc/min): 75
- Minimum Flow Rate (GPM): 0.02
- Minimum Flow Rate (L/min): 0.075
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 2
- Number of Color Valves: 4 Valves
- Number of Colors: 4
- Number of Resin Colors: 4
- Power Source: Electric
- Proportioner Type: Manual
- Proportioning Type: Manual Electronic
$78,720.00
2 In SS Threaded Bung Mounted Pump NPT
ASC ASC-A-2-BMP-NPT
ASC ASC-A-2-BMP-NPT
2 In SS Threaded Bung Mounted Pump NPT
$240.00