Airpower | GRACO INC. S10595 branded products

GG 557392

ADAPTER, 1/8 NPTF HEX

Graco 557392 Pipe Extension - 1/8 NPT male X 1/8 NPT female, 3/4 long

1/8 NPTF Thread Pipe Extension Nipple - Steel
3/4&Prime, overall length
Lubriquip part number 509-027-000

Connection Type: Threaded

Finish/Coating: Zinc
For Use With: Pipe
Material: Steel

$10.10

DISK, BURST, .688 2950 PSI BLUE

GG 557438

DISK, BURST, .688 2950 PSI BLUE

Replacement Rupture Disk, 11/16 in, 2950 psi, Blue Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 2,950 psi - .688" - blue

Lubriquip part number 509-297-000 Trabon part number 9297

$5.30

GG 557518

ROD, TIE MJ 6

Graco 557518 Trabon® MJ Divider Valve - 6 Section Tie Rod (2 Required)

Application: For use with Trabon® MJ Divider Valves.

6-Section Tie Rods
Two tie rods and tie rod nuts required for assembly.
NPSF
Trabon part number 10999-6

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment

$23.40

DISK, BURST, .688 1450 PSI YELLOW

GG 557433

DISK, BURST, .688 1450 PSI YELLOW

Replacement Rupture Disk, 11/16 in, 1450 psi, Yellow Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 1,450 psi - .688" - yellow

Lubriquip part number 509-292-000 Trabon part number 9292

$5.30

DISK, BURST, .375 2950/7300 PSI BLUE

GG 557428

DISK, BURST, .375 2950/7300 PSI BLUE

Replacement Rupture Disk, 3/8 in, 7300 psi, Blue Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 7,300 psi - .375" - blue

Lubriquip part number 509-283-000 Trabon part number 9283

$3.65

DISK, BURST, .688 3250 PSI PURPLE

GG 557439

DISK, BURST, .688 3250 PSI PURPLE

Replacement Rupture Disk, 11/16 in, 3250 psi, Purple Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 3,250 psi - .688" - purple

Lubriquip part number 509-298-000 Trabon part number 9298

$5.30

GG 557374

FITTING, FILL STUD, 1/4 NPT

Graco 557374 Trabon Style Fill Stud, 1/4 inch NPT male

Application: Included with Modu-Flo, E-Series, Lube Master, LubriSystem, PH and other Trabon grease pumps & reservoirs.

Trabon Style Fill Stud
Lubriquip part number 506-189-001
Trabon part number 6189-1

Series: Trabon

Connection Type: Threaded
End A Inlet Thread Gender: None
Maximum Working Pressure (psi): 500
Outlet Size (in): 1/4-18 NPTF
Outlet Thread Gender: Male

$35.20

GG 557735

ROD, TIE, MSP, 7 SECTION

Trabon® MSP Divider Valve - 7 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 7-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-860

$8.25

ROD, TIE, MSP, 6 SECTION

GG 557734

ROD, TIE, MSP, 6 SECTION

Trabon® MSP Divider Valve - 6 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 6-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-850

$6.65

DISK, .375 2650/6400 PSI PNK

GG 557427

DISK, .375 2650/6400 PSI PNK

Graco 557427 Replacement Rupture Disk, 3/8 in, 6400 psi, Pink

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-282-000
Trabon part number 9282

Color: Pink

Maximum Working Pressure (bar): 441
Maximum Working Pressure (kPa): 44096
Maximum Working Pressure (MPa): 44.1
Maximum Working Pressure (psi): 6400
Number of Pieces: 1
Overall Diameter (cm): 1
Overall Diameter (in): 0.375
Overall Diameter (mm): 10

$3.65

DISK, BURST, .375 2050/5500 PSI ORANGE

GG 557425

DISK, BURST, .375 2050/5500 PSI ORANGE

Replacement Rupture Disk, 3/8 in, 5500 psi, Orange Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 5,500 psi - .375" - orange

Lubriquip part number 509-280-000 Trabon part number 9280

$3.65

ROD, TIE, MSP, 8 SECTION

GG 557736

ROD, TIE, MSP, 8 SECTION

Trabon® MSP Divider Valve - 8 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 8-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-870

$8.25

ROD, TIE, MX 5

GG 557490

ROD, TIE, MX 5

Trabon® MX Divider Valve - 5 Section Tie Rod For use with Trabon® MX Divider Valves. 5-Section Tie Rods Lubriquip part number 510-505-050 Trabon part number 10505-5

$73.75

STRAINER, 138 MICRON

GG 557700

STRAINER, 138 MICRON

Replacement Filter Element, 149 micron/100 mesh; Lubriquip part number 525-766-010 For use with High Pressure In-Line Grease Filters.

Replacement element for filter assemblies 563507, 557517, 564406

$234.00

ROD, TIE, MX 3

GG 557488

ROD, TIE, MX 3

Trabon® MX Divider Valve - 3 Section Tie Rod For use with Trabon® MX Divider Valves. 3-Section Tie Rods Lubriquip part number 510-505-030 Trabon part number 10505-3

$49.00

ROD, TIE, FEEDER, MJ-3

GG 557515

ROD, TIE, FEEDER, MJ-3

Trabon® MJ Divider Valve - 3 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 3-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-030 Trabon part number 10999-3

$9.35

DISK, .688 1750 PSI RED

GG 557434

DISK, .688 1750 PSI RED

Graco 557434 Replacement Rupture Disk, 11/16 in, 1750 psi, Red

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-293-000
Trabon part number 9293

Color: Red

Maximum Working Pressure (bar): 121
Maximum Working Pressure (kPa): 12058
Maximum Working Pressure (MPa): 12.1
Maximum Working Pressure (psi): 1750
Number of Pieces: 6
Overall Diameter (cm): 1.7
Overall Diameter (in): 0.688
Overall Diameter (mm): 17

$5.30

BRACKET, SWITCH, T-CYCLE

GG 557546

BRACKET, SWITCH, T-CYCLE

Replacement Bracket for Cycle Switch For use with Cycle Switches.

Replacement bracket for 563272, 563273, 564357

Lubriquip part number 511-968-002

$108.00

Disk, .688 2350 PSI Alum.

GG 557436

Disk, .688 2350 PSI Alum.

Graco 557436 Replacement Rupture Disk, 11/16 in, 2350 psi, Aluminum

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-295-000
Trabon part number 9295

Color: Aluminum

Maximum Working Pressure (bar): 162
Maximum Working Pressure (kPa): 16192
Maximum Working Pressure (MPa): 16.2
Maximum Working Pressure (psi): 2350
Number of Pieces: 6
Overall Diameter (cm): 1.7
Overall Diameter (in): 0.688
Overall Diameter (mm): 17

$5.30

ROD, TIE, MSP, 3 SECTION

GG 557731

ROD, TIE, MSP, 3 SECTION

Graco 557731 Trabon® MSP Divider Valve - 3 Section Tie Rod (3 Required)

Application: For use with Trabon® MSP Divider Valves.

3-Section Tie Rods
Three tie rods and tie rod nuts required for assembly
Lubriquip part number 527-001-820

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

$5.05

ROD, TIE, MSP, 5 SECTION

GG 557733

ROD, TIE, MSP, 5 SECTION

Trabon® MSP Divider Valve - 5 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 5-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-840

$6.65

CAP, FILL, RESERVOIR

GG 557797

CAP, FILL, RESERVOIR

Reservoir Fill Cap For use with Lube Master Pump Packages.

Fill Cup

Lubriquip part number 534-147-000 Trabon part number 34147

$123.50

ROD, TIE, MXP, 3 SECTION

GG 557766

ROD, TIE, MXP, 3 SECTION

Graco 557766 Trabon® MXP Divider Valve - 3 Section Tie Rod (3 Required)

Application: For use with Trabon® MXP Divider Valves.

3-Section Tie Rod
Three required per assembly
Lubriquip part number 527-300-270

Model: Trabon
Series: MXP

Application: In-Plant Machinery

$23.40

FILTER, 25 MICRON, 3 5/8 LG

GG 557804

FILTER, 25 MICRON, 3 5/8 LG

Graco 557804 Replacement Filter Cartridge, 25-micron Standard, Lubriquip part 540-272-001, replaces part 540-272-000 and Trabon part 40272, Genuine Trabon replacement element for Lubriquip assemblies 183-000-010, 183-000-011, 183-000-050, 183-000-051, 183-000-150, 183-000-151

Application: For use with Single and Dual Cartridge Filters.

25 micron Replacement Filter Element
2-5/8 in (67 mm) OD x 3-5/8 in (92 mm) Standard Length Element

For Use With: Cartridge Oil Filters

$77.25

METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT

GG 557813

METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT

Graco 557813 Meter-Flo® Electric Pump, 30 cu in/min (492 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-001

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 30
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT

GG 557815

METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT

Graco 557815 Meter-Flo® Electric Pump, 84 cu in/min (1377 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-021

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 84
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT

GG 557816

METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT

Meter-Flo® Electric Pump, 117 cu in/min (1917 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-041

$1,520.00

METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT

GG 557814

METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT

Graco 557814 Meter-Flo® Electric Pump, 14 cu in/min (229 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-011

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 14
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

FILTER, 25 MICRON, 9-5/8" LG

GG 557807

FILTER, 25 MICRON, 9-5/8" LG

Replacement Filter Cartridge, 25-micron Ex-Lng; Lubriquip part 540-275-001, replaces part 540-275-000 and Trabon part 40275; Genuine Trabon replacement filter element for Lubriquip filter assemblies 183-000-080, 183-000-081, 183-000-120, 183-000-121, 183-000-210, 183-000-211 For use with Single and Dual Cartridge Filters.

25 micron Replacement Filter Element

2-5/8 in (67 mm) OD x 9-5/8 in (92 mm) Extra Long Element

$131.00

SWITCH, PRESS ADJ, 1000-4700 PSI

GG 557829

SWITCH, PRESS ADJ, 1000-4700 PSI

Moisture-Resistant Single Control Pressure Switch, 4700 psi (324 bar)

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment. Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly LED lights visually display pressure switch functions Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers; 124595 4-pin M12 micro-connector sold separately Moisture resistant and factory set to ensure accuracy for long life and reliability Sends an alarm signal to alert either a high or low pressure condition Available for hydraulic pressures from 400 to 4700 psi (28 to 324 bar) 1/4 in NPT thread allows quick connection to injector systems Lubriquip part number 542-210-120

$617.00

METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT

GG 557818

METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT

Graco 557818 Meter-Flo® Electric Pump, 40 cu in/min (655 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-091

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 40
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103.4
Maximum Working Pressure (kPa): 10340
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

GAUGE, 3000 PSI 1/4NPT C/B LIQ

GG 557866

GAUGE, 3000 PSI 1/4NPT C/B LIQ

Graco 557866 Pressure Gauge, Back-Mounted, 0-3000 psi, 2 1/2 in. Dial Diameter

Dial Diameter (cm): 6
Dial Diameter (in): 2.5
Dial Diameter (mm): 64

Inlet Size (cm): 0.635
Inlet Size (in): 1/4
Inlet Size (mm): 6.35
Inlet Thread Type: NPT
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000

$250.00

NGL #00 EP Lithium Grease 3 Lb. Bucket

GG 557941

NGL #00 EP Lithium Grease 3 Lb. Bucket

$341.00

GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC

GG 557931

GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC

Graco 557931 3-Way Solenoid Valve Kit - 24 VDC

Application: For use with Grease Jockey On-Road Mobile Lubrication Systems.

24 VDC replacement solenoid
Lubriquip part number 550-250-265

Application: On-Road Vehicles, Off-Road Equipment

Compatible Material: Air
Material: Brass
Maximum Voltage (V dc): 24
Port Size (cm): 0.1191
Port Size (in): 0.046875
Port Size (mm): 1.1913
Power Rating (W): 7

$168.50

KIT, RELIEF VLV VIKING PUMP

GG 557998

KIT, RELIEF VLV VIKING PUMP

Graco 557998 Meter-Flo® Relief Valve Repair Kit

Application: For use with Meter-Flo Pumps.

Meter-Flo Relief Valve Repair Kit - 540-800-XX1 Models
Lubriquip part number 560-001-920

For Use With: Viking Pumps

Includes: Poppet, Cap, Spring, Hardware
Kit Type: Repair Kit

$76.75

Kit, Mvb Pump Seal

GG 558015

Kit, Mvb Pump Seal

$83.25

CABLE, CONN 6'

GG 558021

CABLE, CONN 6'

Graco 558021 Mini-Straight Connection Cable - 6 ft, 3-Pin

Application: For use with Proximity Switches.

3-pin cable, straight connector, 6 feet (1.83 m)
Lubriquip part number 570-999-080

Amperage (A): 13

For Use With: MSP Divider Valves, Proximity Switches, Air Oil Lubrication System
IP Rating: IP68 NEMA 6P
Jacket Material: PVC

$100.00

CABLE, CONN 12'

GG 558022

CABLE, CONN 12'

Mini-Straight Connection Cable - 12 ft, 3-Pin For use with Proximity Switches.

3-pin cable, straight connector, 12 feet (3.66 m)

Lubriquip part number 570-999-090

$135.50

CABLE, CONN CABLE 4PN 24V

GG 558025

CABLE, CONN CABLE 4PN 24V

Graco 558025 Proximity Switch Connector Cable - 24 V, 12 ft, 4-Pin, Straight Connector, Polarity, PNP

Application: For use with Proximity Switches.

4-pin cable, straight connector, polarity, PNP, 12 feet (3.66 m)
Lubriquip part number 570-999-953

For Use With: Proximity Switches

$552.00

CABLE, 5 PIN W/ CONN

GG 558024

CABLE, 5 PIN W/ CONN

Proximity Switch Connector Cable - 12 ft, 5-Pin For use with Proximity Switches.

5-pin cable, straight connector, 12 feet (3.66 m)

Lubriquip part number 570-999-170

$194.50

Sleeve, Brass 5/32T Compr Type

GG 558188

Sleeve, Brass 5/32T Compr Type

$5.95

Nut

GG 558190

Nut

$38.60

NUT, BRASS 5/32 TUBE COMPR

GG 558189

NUT, BRASS 5/32 TUBE COMPR

Graco 558189 Thrif-T Luber Hardware - TLCN-00 - Compression Nut

Application: For use with Thrif-t Luber Pumps.

Thrif-T Luber Hardware - TLCN-00 - Compression Nut
Lubriquip part number 435-390-070

Inside Diameter (in): 0.3125
Inside Diameter (mm): 7.9375

Material: Brass
Nut Type: Hex Nut

Call for pricing

O-RING, -908 VITON

GG 558730

O-RING, -908 VITON

Graco 558730 O-Ring, Viton

Application: For use with Saniforce and Husky Electric Diaphragm Pumps.

Lubriquip part number GOV-060-020

For Use With: Husky 1050e Pump, SaniForce 1040e Pump

Inside Diameter (cm): 1.6
Inside Diameter (in): 0.644
Inside Diameter (mm): 16.4
Material: Viton
Number of Pieces: 1
Outside Diameter (cm): 2.1
Outside Diameter (in): 0.818
Outside Diameter (mm): 20.8

$3.65

O-RING, -113 VITON-A 75 DURO

GG 558692

O-RING, -113 VITON-A 75 DURO

Lubriquip part number 422-041-130
Trabon part number 25613-V
Manzel part number 22X4-113

Inside Diameter (cm): 1.4
Inside Diameter (in): 0.549
Inside Diameter (mm): 13.9
Material: Viton
Number of Pieces: 1
Outside Diameter (cm): 1.9
Outside Diameter (in): 0.755
Outside Diameter (mm): 19.2

Call for pricing

COUPLER, 1/4, W/CHECK

GG 558906

COUPLER, 1/4, W/CHECK

Mating Coupler/Coupling for grease fill stud on Trabon™ Reservoirs, 1/4 in. NPT female, with Check For use with Modu-Flo, E-Series, Lube Master, LubriSystem, PH and other Trabon grease pumps. 1/4 inch NPT female thread connects to end of hose on grease pump used to refill the reservoir.

Mating Coupler for Trabon Grease Fill Stud

Former part numbers: Lubriquip 506-322-000, Trabon 6322 Mates to fill stud 557374 Lubriquip part number 506-322-000 Trabon part number 6322

$32.10

BRACKET, MTG RTN FILTER

GG 558927

BRACKET, MTG RTN FILTER

Filter Mounting Bracket

Lubriquip part number 521-010-440

$100.00

METER-FLO PUMP, 55/83 CU IN/MIN CW NPT

GG 558949

METER-FLO PUMP, 55/83 CU IN/MIN CW NPT

Meter-Flo® Electric Pump, 84 cu in/min (1377 cc/min) @ 1,725 rpm, NPT Ports, CW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-031

$1,550.00

COUPLING, ANCHOR CROSS 1/8

GG 560543

COUPLING, ANCHOR CROSS 1/8

Graco 560543 Cross Anchor Fitting, 1/8 in. NPSF

Cross Anchor Fitting, 1/8 in. NPSF
Lubriquip part number 509-189-000
Trabon part number 9189

Connection Type: Threaded

Finish/Coating: Zinc
For Use With: Hose
Material: Steel

$53.50

BLOCK, INLET MACH MX

GG 560620

BLOCK, INLET MACH MX

Graco 560620 Trabon® MX Divider Valve - MX Inlet

Application: For use with Trabon® MX Divider Valves.

MX inlet
Lubriquip part number 510-914-003

Model: Trabon
Series: MX

Application: In-Plant Machinery
Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525
Inlet Thread Type: NPT

$368.00

BLOCK, END SECTION MJ

GG 560645

BLOCK, END SECTION MJ

Trabon® MJ Divider Valve - Standard End Section For use with Trabon® MJ Divider Valves. Standard end section (Must be ordered in multiples of five) NPSF Lubriquip part number 510-994-002

$70.00

BLOCK, INLET, MSP/MHH NPSF

GG 560919

BLOCK, INLET, MSP/MHH NPSF

Manzel® MHH Divider Valve - Inlet - 1/4-18 NPSF For use with Trabon® MSP/MHH Divider Valves. Standard Inlet 1/4-18 NPSF (NPT) Lubriquip part number 527-001-800

$38.10

MJ VALVE, BLOCK, STD SECTION, MJ-15S

GG 562502

MJ VALVE, BLOCK, STD SECTION, MJ-15S

Graco 562502 Trabon® MJ Series-Flo Divider Valve - MJ-15S - 0.030 in³ (0.49 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Application: Compact and customizable divider block series for machine tool, product or press equipment.

Space efficient–from 6 to 16 points from one block assembly
Built-in outlet check valves ensure accurate lube delivery, every time
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 001-015-001

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.030
Divider Valve Series: MJ
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #1
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (psi): 2000
Minimum Working Pressure (psi): 200
Number of Outlets: 1
Outlet Size (cm): 0.3175
Outlet Size (in): 1/8
Outlet Size (mm): 3.175
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$198.50

Rod, Tie, Lower, MGO-4

GG 561471

ROD, TIE, LOWER, MGO-4

$490.00

MJ VALVE, ASSY MJ 5T

GG 562503

MJ VALVE, ASSY MJ 5T

Trabon® MJ Series-Flo Divider Valve - MJ-5T - 0.005 in³ (0.082 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Compact and customizable divider block series for machine tool, product or press equipment. Space efficient–from 6 to 16 points from one block assembly Built-in outlet check valves ensure accurate lube delivery, every time Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Lubriquip part number 001-005-002

$175.50

MJ VALVE, ASSY MJ 10T

GG 562504

MJ VALVE, ASSY MJ 10T

Graco 562504 Trabon® MJ Series-Flo Divider Valve - MJ-10T - 0.010 in³ (0.16 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Application: Compact and customizable divider block series for machine tool, product or press equipment.

Space efficient–from 6 to 16 points from one block assembly
Built-in outlet check valves ensure accurate lube delivery, every time
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 001-010-002

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.010
Divider Valve Series: MJ
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #1
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (psi): 2000
Minimum Working Pressure (psi): 200
Number of Outlets: 2
Outlet Size (cm): 0.3175
Outlet Size (in): 1/8
Outlet Size (mm): 3.175
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$175.50

MJ VALVE, ASSY MJ 15T

GG 562505

MJ VALVE, ASSY MJ 15T

Trabon® MJ Series-Flo Divider Valve - MJ-15T - 0.015 in³ (0.246 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Compact and customizable divider block series for machine tool, product or press equipment. Space efficient–from 6 to 16 points from one block assembly Built-in outlet check valves ensure accurate lube delivery, every time Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Lubriquip part number 001-015-002

$175.50

MJ VALVE, ASSY IND MJ 10T

GG 562510

MJ VALVE, ASSY IND MJ 10T

Graco 562510 Trabon® MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-10T - 0.010 in³ (0.16 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Application: Compact and customizable divider block series for machine tool, product or press equipment.

Space efficient–from 6 to 16 points from one block assembly
Built-in outlet check valves ensure accurate lube delivery, every time
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 001-010-602

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Indicator
Discharge Per Piston Stroke (in³): 0.010
Divider Valve Series: MJ
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 60
Maximum NLGI Grade: #1
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (psi): 2000
Minimum Working Pressure (psi): 200
Number of Outlets: 2
Outlet Size (cm): 0.3175
Outlet Size (in): 1/8
Outlet Size (mm): 3.175
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$306.00

MJ VALVE, ASSY IND MJ 15T

GG 562511

MJ VALVE, ASSY IND MJ 15T

Graco 562511 Trabon® MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-15T - 0.015 in³ (0.246 cm³)

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Application: Compact and customizable divider block series for machine tool, product or press equipment.

Space efficient–from 6 to 16 points from one block assembly
Built-in outlet check valves ensure accurate lube delivery, every time
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 001-015-602

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Indicator
Discharge Per Piston Stroke (in³): 0.015
Divider Valve Series: MJ
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 60
Maximum NLGI Grade: #1
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (psi): 2000
Minimum Working Pressure (psi): 200
Number of Outlets: 2
Outlet Size (cm): 0.3175
Outlet Size (in): 1/8
Outlet Size (mm): 3.175
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$292.50

MX VALVE, ASSY 050S

GG 562516

MX VALVE, ASSY 050S

Graco 562516 Trabon® MX Divider Valve - MX-50S - 0.100 in³ (1.64 cm³)

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

Lubricates large bearings
Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
Durable design withstands harsh environments and operating conditions
Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 004-050-001

Model: Trabon
Series: MX

Application: In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.100
Divider Valve Series: MX
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000
Minimum Working Pressure (psi): 200
Number of Outlets: 1
Outlet Size (cm): 0.635
Outlet Size (in): 1/4
Outlet Size (mm): 6.35
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$485.00

MX VALVE, ASSY 050T

GG 562517

MX VALVE, ASSY 050T

Graco 562517 Trabon® MX Divider Valve - MX-50T - 0.050 in³ (0.82 cm³)

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

Lubricates large bearings
Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
Durable design withstands harsh environments and operating conditions
Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 004-050-002

Model: Trabon
Series: MX

Application: In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.050
Divider Valve Series: MX
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 93
Maximum Operating Temperature (°F): 200
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000
Minimum Working Pressure (psi): 200
Number of Outlets: 2
Outlet Size (cm): 0.635
Outlet Size (in): 1/4
Outlet Size (mm): 6.35
Outlet Thread Gender: Female
Outlet Thread Type: NPSF

$485.00

MX VALVE, ASSY 125S IND RH

GG 562521

MX VALVE, ASSY 125S IND RH

Trabon® MX Divider Valve with Right Hand Cycle Pin Indicator - MX-125S - 0.250 in³ (4.10 cm³)

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

Lubricates large bearings Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Lubriquip part number 004-125-601

$608.00

MX VALVE, ASSY 100S

GG 562540

MX VALVE, ASSY 100S

Trabon® MX Divider Valve - MX-100S - 0.200 in³ (3.28 cm³)

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

Lubricates large bearings Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Lubriquip part number 004-100-001

$485.00

MGO VALVE, ASSY MGO 600S SAE

GG 562573

MGO VALVE, ASSY MGO 600S SAE

Trabon® MGO Modular Divider Valve - MGO-600S - 1.200 in³ (19.7 cm³)

While critical bearings are hard at work on your largest machine tools, Graco's line of centralized and automatic lubrication systems is delivering precise amounts of lubricant at frequent intervals to every lube point–even in hard to reach areas.

Lubricates large bearings Delivers up to 1.2 cubic inches (19.7 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Largest output available with 22 outlets and 11 working sections SAE porting for a sealed outlet to ensure leak-free life TFE standard seals allow for maximum fluid compatibility and high temperature use Lubriquip part number 007-600-031

$1,845.00

Bearing, Assembly, 5/8 Id

GG 562586

Bearing, Assembly, 5/8 Id

$196.50

Trabon MD Mono Block Divider Valve, MD-3

GG 562657

Trabon MD Mono Block Divider Valve, MD-3

$345.00

MHH VALVE, ASSY 18S

GG 562682

MHH VALVE, ASSY 18S

Manzel® MHH Modular Divider Valve .018 Single

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-000-495

$108.50

MSP VALVE, ASSY MSP 25T

GG 562724

MSP VALVE, ASSY MSP 25T

Trabon® MSP Modular Divider Valve - MSP-25T - 0.025 in³ (0.41 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-215

$58.00

MSP VALVE, ASSY MSP 20T

GG 562723

MSP VALVE, ASSY MSP 20T

Trabon® MSP Modular Divider Valve - MSP-20T - 0.020 in³ (0.33 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-205

$58.00

MHH VALVE, ASSY 06S

GG 562679

MHH VALVE, ASSY 06S

Manzel® MHH Modular Divider Valve .006 Single

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch .cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-000-465

$105.50

MSP VALVE, ASSY MSP 40S

GG 562718

MSP VALVE, ASSY MSP 40S

Trabon® MSP Modular Divider Valve - MSP-40S - 0.080 in³ (1.31 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-085

$58.00

MSP VALVE, ASSY MSP 35T

GG 562726

MSP VALVE, ASSY MSP 35T

Graco 562726 Trabon® MSP Modular Divider Valve - MSP-35T - 0.035 in³ (0.57 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-235

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.035
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 2

$58.00

MSP VALVE, ASSY MSP 30T

GG 562725

MSP VALVE, ASSY MSP 30T

Trabon® MSP Modular Divider Valve - MSP-30T - 0.030 in³ (0.49 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-225

$58.00

MSP VALVE, ASSY MSP 15S

GG 562713

MSP VALVE, ASSY MSP 15S

Trabon® MSP Modular Divider Valve - MSP-15S - 0.030 in³ (0.49 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-035

$58.00

MHH VALVE, ASSY 09S

GG 562680

MHH VALVE, ASSY 09S

Graco 562680 Manzel® MHH Modular Divider Valve .009 Single

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.

Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-000-475

Model: Manzel
Series: MHH

Application: In-Plant Machinery, Compressor Equipment
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Pin
Discharge Per Piston Stroke (in³): 0.009
Divider Valve Series: MHH
Inlet Size (in): 1/4 - 18, 7/16 - 20
Inlet Thread Gender: Female
Inlet Thread Type: NPS, SAE
Material: Steel
Maximum NLGI Grade: #2
Maximum Working Pressure (bar): 517
Maximum Working Pressure (kPa): 51700
Maximum Working Pressure (psi): 7500
Number of Outlets: 1
Outlet Size (in): 1/8 - 27, 7/16 - 20
Outlet Thread Gender: Female
Outlet Thread Type: NPS, SAE

$108.50

MSP VALVE, ASSY MSP 30S

GG 562716

MSP VALVE, ASSY MSP 30S

Trabon® MSP Modular Divider Valve - MSP-30S - 0.060 in³ (0.98 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-065

$58.00

MSP VALVE, ASSY MSP 05S

GG 562711

MSP VALVE, ASSY MSP 05S

Graco 562711 Trabon® MSP Modular Divider Valve - MSP-05S - 0.010 in³ (0.16 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-015

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.010
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 1

$58.00

MSP VALVE, ASSY MSP 35S

GG 562717

MSP VALVE, ASSY MSP 35S

Trabon® MSP Modular Divider Valve - MSP-35S - 0.070 in³ (1.15 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-075

$58.00

MHH VALVE, ASSY 12S

GG 562681

MHH VALVE, ASSY 12S

Graco 562681 Manzel® MHH Modular Divider Valve .012 Single

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.

Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-000-485

Model: Manzel
Series: MHH

Application: In-Plant Machinery, Compressor Equipment
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Pin
Discharge Per Piston Stroke (in³): 0.012
Divider Valve Series: MHH
Inlet Size (in): 1/4 - 18, 7/16 - 20
Inlet Thread Gender: Female
Inlet Thread Type: NPS, SAE
Material: Steel
Maximum NLGI Grade: #2
Maximum Working Pressure (bar): 517
Maximum Working Pressure (kPa): 51700
Maximum Working Pressure (psi): 7500
Number of Outlets: 1
Outlet Size (in): 1/8 - 27, 7/16 - 20
Outlet Thread Gender: Female
Outlet Thread Type: NPS, SAE

$108.50

MSP VALVE, ASSY MSP 10T

GG 562721

MSP VALVE, ASSY MSP 10T

Trabon® MSP Modular Divider Valve - MSP-10T - 0.010 in³ (0.16 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-185

$58.00

MSP VALVE, ASSY MSP 40T

GG 562727

MSP VALVE, ASSY MSP 40T

Trabon® MSP Modular Divider Valve - MSP-40T - 0.040 in³ (0.66 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-245

$58.00

MSP VALVE, ASSY IND MSP 30S

GG 562731

MSP VALVE, ASSY IND MSP 30S

Graco 562731 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-30S - 0.060 in³ (0.98 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-755

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Indicator
Discharge Per Piston Stroke (in³): 0.060
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 60
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 1

$137.00

MSP VALVE, ASSY IND MSP 20S

GG 562729

MSP VALVE, ASSY IND MSP 20S

Graco 562729 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-20S - 0.040 in³ (0.66 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-735

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Indicator
Discharge Per Piston Stroke (in³): 0.040
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 60
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 1

$137.00

MSP VALVE, ASSY IND MSP 20T

GG 562739

MSP VALVE, ASSY IND MSP 20T

Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-20T - 0.020 in³ (0.33 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-935

$137.00

MSP VALVE, ASSY MSP 25S

GG 562715

MSP VALVE, ASSY MSP 25S

Trabon® MSP Modular Divider Valve - MSP-25S - 0.050 in³ (0.82 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-055

$58.00

MD VALVE, FEEDER, 4

GG 562658

MD VALVE, FEEDER, 4

Trabon® MD Mono Block Divider Valve - MD-4

The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications

4 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants Lubriquip part number 103-000-151

$361.00

MXP VALVE, TWIN 100T

GG 562816

MXP VALVE, TWIN 100T

Trabon® MXP Modular Divider Valve - MXP-100T - 0.100 in³ (1.64 cm³)

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-040

$237.00

MHH VALVE, ASSY 12T

GG 562687

MHH VALVE, ASSY 12T

Graco 562687 Manzel® MHH Modular Divider Valve .012 Twin

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.

Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.

Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-000-615

Model: Manzel
Series: MHH

Application: In-Plant Machinery, Compressor Equipment
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Pin
Discharge Per Piston Stroke (in³): 0.012
Divider Valve Series: MHH
Inlet Size (in): 1/4 - 18, 7/16 - 20
Inlet Thread Gender: Female
Inlet Thread Type: NPS, SAE
Material: Steel
Maximum NLGI Grade: #2
Maximum Working Pressure (bar): 517
Maximum Working Pressure (kPa): 51700
Maximum Working Pressure (psi): 7500
Number of Outlets: 2
Outlet Size (in): 1/8 - 27, 7/16 - 20
Outlet Thread Gender: Female
Outlet Thread Type: NPS, SAE

$108.50

MSP VALVE, ASSY IND MSP 40T

GG 562743

MSP VALVE, ASSY IND MSP 40T

Graco 562743 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-40T - 0.040 in³ (0.66 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-975

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: Cycle Indicator
Discharge Per Piston Stroke (in³): 0.040
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 60
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 2

$137.00

MSP VALVE, ASSY MSP 15T

GG 562722

MSP VALVE, ASSY MSP 15T

Graco 562722 Trabon® MSP Modular Divider Valve - MSP-15T - 0.015 in³ (0.26 cm³)

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
Lubriquip part number 106-100-195

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
Compatible Material: Oil, Grease
Cycle Indicator: None
Discharge Per Piston Stroke (in³): 0.015
Divider Valve Series: MSP
Material: Carbon Steel
Maximum Cycle Rate (cycles/min): 200
Maximum NLGI Grade: #2
Maximum Operating Temperature (°C): 176
Maximum Operating Temperature (°F): 350
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (psi): 3500
Minimum Working Pressure (bar): 14
Minimum Working Pressure (psi): 200
Number of Outlets: 2

$58.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1604

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1604 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 4 Colors HP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$78,410.00

Kit Knob Assembly, Locking

GG NXT090

Kit Knob Assembly, Locking

$99.50

PROMIX 2KS PROPORTIONER MANUAL

GG MD1602

PROMIX 2KS PROPORTIONER MANUAL

ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors HP, 1 catalyst, and 2 Air Flow Switches Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$64,870.00

Kit, Repair, Pilot Regulator

GG NXT095

Kit, Repair, Pilot Regulator

$284.50

PROMIX 2KS PROPORTIONER MANUAL

GG MD1601

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1601 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors HP, 1 catalyst, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$63,010.00

Kit Repair, Soft Parts

GG NXT096

Kit Repair, Soft Parts

$176.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1312

PROMIX 2KS PROPORTIONER MANUAL

ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 7 colors LP, 2 catalysts LP, and 2 Air Flow Switches Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$79,450.00

Kit Repair, Relief Valve

GG NXT099

Kit Repair, Relief Valve

$180.50

Control Air, Locking, 85 psi

GG NXT031

Control Air, Locking, 85 psi

$1,070.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1314

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1314 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 7 Colors LP, 2 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 7 Valves
Number of Colors: 7
Number of Resin Colors: 7
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$90,070.00