GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, D200, 20L

GG CM155B

CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, D200, 20L

Graco CM155B 63:1 Ratio 20 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 1.6
Maximum Flow Rate (L/min): 6.1
Maximum Fluid Pressure (bar): 434.4
Maximum Fluid Pressure (kPa): 43440
Maximum Fluid Pressure (psi): 6300
Maximum Fluid Pressure (bar): 434.4
Maximum Fluid Pressure (kPa): 43440
Maximum Fluid Pressure (psi): 6300
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 441
Maximum Working Pressure (kPa): 44100
Maximum Working Pressure (MPa): 44.1
Maximum Working Pressure (psi): 6300
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 63:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$20,630.00

CHECK-MATE SUPPLY UNIT, 23:1, 3.0 RAM, 200L

GG CM2159

CHECK-MATE SUPPLY UNIT, 23:1, 3.0 RAM, 200L

Graco CM2159 23:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 3.2
Maximum Flow Rate (L/min): 12.1
Maximum Fluid Pressure (bar): 158.8
Maximum Fluid Pressure (kPa): 15880
Maximum Fluid Pressure (psi): 2300
Maximum Fluid Pressure (bar): 158.8
Maximum Fluid Pressure (kPa): 15880
Maximum Fluid Pressure (psi): 2300
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 161
Maximum Working Pressure (kPa): 16100
Maximum Working Pressure (MPa): 16.1
Maximum Working Pressure (psi): 2300
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 23:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$23,710.00

CHECK-MATE SUPPLY UNIT, 40:1, 0 VOLT, D60, 20L

GG CM1F4F

CHECK-MATE SUPPLY UNIT, 40:1, 0 VOLT, D60, 20L

Graco CM1F4F Supply Unit, Check-Mate, 40:1, S/S, Severe Duty, 3 in. D60 Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco D60 - Provides higher down-force and 60-liter pail capacity
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D60

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 1.6
Maximum Flow Rate (L/min): 6.1
Maximum Fluid Pressure (bar): 275.8
Maximum Fluid Pressure (kPa): 27580
Maximum Fluid Pressure (psi): 4000
Maximum Fluid Pressure (bar): 275.8
Maximum Fluid Pressure (kPa): 27580
Maximum Fluid Pressure (psi): 4000
Maximum Height (cm): 226.06
Maximum Height (ft): 7.42
Maximum Height (in): 89
Maximum Height (m): 2.26
Maximum Height (mm): 2260.6
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (MPa): 28
Maximum Working Pressure (psi): 4000
Minimum Height (cm): 149.86
Minimum Height (ft): 4.92
Minimum Height (in): 59
Minimum Height (m): 1.5
Minimum Height (mm): 1498.6
Overall Depth (cm): 45.72
Overall Depth (in): 18
Overall Depth (mm): 457.2
Overall Width (cm): 71.12
Overall Width (in): 28
Overall Width (mm): 711.2
Power Type: Pneumatic
Pump Ratio: 40:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

Call for pricing

CHECK-MATE SUPPLY UNIT, 63:1, 3.0 RAM, 200L

GG CM1559

CHECK-MATE SUPPLY UNIT, 63:1, 3.0 RAM, 200L

63:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. For large drums up to 200 liter (55 gal) Graco D200 - For high-volume in-plant applications Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

$22,120.00

CHECK-MATE SUPPLY UNIT, 68:1, 3.0 RAM, 200L

GG CM2L59

CHECK-MATE SUPPLY UNIT, 68:1, 3.0 RAM, 200L

68:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

$24,560.00

CHECK-MATE SUPPLY UNIT, 23:1, 3.0 RAM, 200L

GG CM2558

CHECK-MATE SUPPLY UNIT, 23:1, 3.0 RAM, 200L

Graco CM2558 23:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 3.2
Maximum Flow Rate (L/min): 12.1
Maximum Fluid Pressure (bar): 158.8
Maximum Fluid Pressure (kPa): 15880
Maximum Fluid Pressure (psi): 2300
Maximum Fluid Pressure (bar): 158.8
Maximum Fluid Pressure (kPa): 15880
Maximum Fluid Pressure (psi): 2300
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 161
Maximum Working Pressure (kPa): 16100
Maximum Working Pressure (MPa): 16.1
Maximum Working Pressure (psi): 2300
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 23:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

Call for pricing

CHECK-MATE SUPPLY UNIT, 36:1, 3.0 RAM, 200L

GG CM2959

CHECK-MATE SUPPLY UNIT, 36:1, 3.0 RAM, 200L

36:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

$23,940.00

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

GG CM3A5A

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

Graco CM3A5A 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 4
Maximum Flow Rate (L/min): 15.1
Maximum Fluid Pressure (bar): 379.2
Maximum Fluid Pressure (kPa): 37920
Maximum Fluid Pressure (psi): 5500
Maximum Fluid Pressure (bar): 379.2
Maximum Fluid Pressure (kPa): 37920
Maximum Fluid Pressure (psi): 5500
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 385
Maximum Working Pressure (kPa): 38500
Maximum Working Pressure (MPa): 38.5
Maximum Working Pressure (psi): 5500
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 55:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

Call for pricing

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM3958

CHECK-MATE SUPPLY UNIT,55:1,3.0 RAM,200L

Graco CM3958 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum
Platen wipers can be replaced in seconds
Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

Call for pricing

Check-Mate Supply Unit, 55:1, 3.0 Ram, 200L

GG CM3A58

CHECK-MATE SUPPLY UNIT,55:1,3.0 RAM,200L

Model: Check-Mate

Call for pricing

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

GG CM3F59

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

Graco CM3F59 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 4
Maximum Flow Rate (L/min): 15.1
Maximum Fluid Pressure (bar): 379.2
Maximum Fluid Pressure (kPa): 37920
Maximum Fluid Pressure (psi): 5500
Maximum Fluid Pressure (bar): 379.2
Maximum Fluid Pressure (kPa): 37920
Maximum Fluid Pressure (psi): 5500
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 385
Maximum Working Pressure (kPa): 38500
Maximum Working Pressure (MPa): 38.5
Maximum Working Pressure (psi): 5500
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 55:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$36,840.00

CHECK-MATE SUPPLY UNIT, 11:1, 0 VOLT, S20, 20L

GG CM6C3F

CHECK-MATE SUPPLY UNIT, 11:1, 0 VOLT, S20, 20L

11:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco S20 - For low-volume applications of medium to high-viscosity materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

$15,470.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, L20C, 20L

GG CM7A1B

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, L20C, 20L

Graco CM7A1B 20:1 Ratio 20 L L20C Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco L20c - A lightweight, elevator ram on a cart
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: L20c

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kg/cm²): 7.03
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Height (cm): 175.26
Maximum Height (ft): 5.75
Maximum Height (in): 69
Maximum Height (m): 1.75
Maximum Height (mm): 1752.6
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Height (cm): 111.76
Minimum Height (ft): 3.67
Minimum Height (in): 44
Minimum Height (m): 1.12
Minimum Height (mm): 1117.6
Overall Depth (cm): 53.34
Overall Depth (in): 21
Overall Depth (mm): 533.4
Overall Width (cm): 55.88
Overall Width (in): 22
Overall Width (mm): 558.8
Power Type: Pneumatic
Pump Ratio: 20:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$11,660.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

GG CM7A2B

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

Graco CM7A2B 20:1 Ratio 20 L S20 Cart Mounted Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco S20c - Same as the S20, but includes a cart
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: S20c

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Height (cm): 228.6
Maximum Height (ft): 7.5
Maximum Height (in): 90
Maximum Height (m): 2.29
Maximum Height (mm): 2286
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Height (cm): 165.1
Minimum Height (ft): 5.42
Minimum Height (in): 65
Minimum Height (m): 1.65
Minimum Height (mm): 1651
Overall Depth (cm): 66.1
Overall Depth (in): 26
Overall Depth (mm): 661
Overall Width (cm): 56.2
Overall Width (in): 22.1
Overall Width (mm): 562
Power Type: Pneumatic
Pump Ratio: 20:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$13,170.00

CHECK-MATE SUPPLY UNIT, 26:1, 3.0 RAM, 200L

GG CM5959

CHECK-MATE SUPPLY UNIT, 26:1, 3.0 RAM, 200L

Graco CM5959 26:1 Ratio 200 L 3.0 RAM Supply Unit with EPDM Wiper Plate

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 7.8
Maximum Flow Rate (L/min): 29.5
Maximum Fluid Pressure (bar): 179.3
Maximum Fluid Pressure (kPa): 17930
Maximum Fluid Pressure (psi): 2600
Maximum Fluid Pressure (bar): 179.3
Maximum Fluid Pressure (kPa): 17930
Maximum Fluid Pressure (psi): 2600
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 182
Maximum Working Pressure (kPa): 18200
Maximum Working Pressure (MPa): 18.2
Maximum Working Pressure (psi): 2600
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 26:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$26,900.00

SPLYUNIT, 20: 1, D200, 200L

GG CM7A59

SPLYUNIT, 20: 1, D200, 200L

200 L D200 Supply System

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials For large drums up to 200 liter (55 gal) Graco D200 - For high-volume in-plant applications Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

$17,460.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

GG CM7A3B

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

Graco CM7A3B 20:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco S20 - For low-volume applications of medium to high-viscosity materials
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: S20

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Height (cm): 150.6
Maximum Height (ft): 4.94
Maximum Height (in): 59.3
Maximum Height (m): 1.51
Maximum Height (mm): 1506
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Height (cm): 90.9
Minimum Height (ft): 2.98
Minimum Height (in): 35.8
Minimum Height (m): 0.91
Minimum Height (mm): 909
Overall Depth (cm): 48.26
Overall Depth (in): 19
Overall Depth (mm): 482.6
Overall Width (cm): 43.18
Overall Width (in): 17
Overall Width (mm): 431.8
Power Type: Pneumatic
Pump Ratio: 20:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$11,900.00

Check-Mate Supply Unit, 42:1, 6.5 Ram, 200L

GG CM5M78

Check-Mate Supply Unit, 42:1, 6.5 Ram, 200L

Call for pricing

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

GG CM7C2F

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

Graco CM7C2F Supply Unit, Check-Mate, 20:1, S/S, Severe Duty, 3 in. S20c Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco S20c - Same as the S20, but includes a cart
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: S20c

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Height (cm): 228.6
Maximum Height (ft): 7.5
Maximum Height (in): 90
Maximum Height (m): 2.29
Maximum Height (mm): 2286
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Height (cm): 165.1
Minimum Height (ft): 5.42
Minimum Height (in): 65
Minimum Height (m): 1.65
Minimum Height (mm): 1651
Overall Depth (cm): 66.1
Overall Depth (in): 26
Overall Depth (mm): 661
Overall Width (cm): 56.2
Overall Width (in): 22.1
Overall Width (mm): 562
Power Type: Pneumatic
Pump Ratio: 20:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$17,570.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

GG CM7C3F

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

20:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

$15,880.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

GG CM7C5A

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

Graco CM7C5A Supply Unit, Check-Mate, 20:1, S/S, Severe Duty, 3 in. D200 Ram, Integrated Air Controls, 200L Al Platen, Double O-Ring Neoprene Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Fluid Pressure (bar): 137.9
Maximum Fluid Pressure (kPa): 13790
Maximum Fluid Pressure (psi): 2000
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 20:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$20,630.00

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

GG CM7C58

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

20:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

$23,780.00

Check-Mate Supply Unit, 20:1, 0 Volt, L20C, 20L

GG CM7F1F

Check-Mate Supply Unit, 20:1, 0 Volt, L20C, 20L

$17,570.00

CHECK-MATE SUPPLY UNIT, 38:1, 0 VOLT, D200, 200L

GG CM8B5A

CHECK-MATE SUPPLY UNIT, 38:1, 0 VOLT, D200, 200L

Graco CM8B5A 38:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 262
Maximum Fluid Pressure (kPa): 26200
Maximum Fluid Pressure (psi): 3800
Maximum Fluid Pressure (bar): 262
Maximum Fluid Pressure (kPa): 26200
Maximum Fluid Pressure (psi): 3800
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 262
Maximum Working Pressure (kPa): 26200
Maximum Working Pressure (MPa): 26.2
Maximum Working Pressure (psi): 3800
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 38:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

Call for pricing

CHECK-MATE SUPPLY UNIT, 38:1, 0 V, S20 CART, 20L

GG CM8C2F

CHECK-MATE SUPPLY UNIT, 38:1, 0 V, S20 CART, 20L

Graco CM8C2F Supply Unit, Check-Mate, 38:1, S/S, Severe Duty, 3 in. S20c Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco S20c - Same as the S20, but includes a cart
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: S20c

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 262
Maximum Fluid Pressure (kPa): 26200
Maximum Fluid Pressure (psi): 3800
Maximum Fluid Pressure (bar): 262
Maximum Fluid Pressure (kPa): 26200
Maximum Fluid Pressure (psi): 3800
Maximum Height (cm): 228.6
Maximum Height (ft): 7.5
Maximum Height (in): 90
Maximum Height (m): 2.29
Maximum Height (mm): 2286
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 262
Maximum Working Pressure (kPa): 26200
Maximum Working Pressure (MPa): 26.2
Maximum Working Pressure (psi): 3800
Minimum Height (cm): 165.1
Minimum Height (ft): 5.42
Minimum Height (in): 65
Minimum Height (m): 1.65
Minimum Height (mm): 1651
Overall Depth (cm): 66.1
Overall Depth (in): 26
Overall Depth (mm): 661
Overall Width (cm): 56.2
Overall Width (in): 22.1
Overall Width (mm): 562
Power Type: Pneumatic
Pump Ratio: 38:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

Call for pricing

Check-Mate Supply Unit, 38:1, S20, 20L, Cart-Mt

GG CM8F2F

Check-Mate Supply Unit, 38:1, S20, 20L, Cart-Mt

Call for pricing

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, L20C, 20L

GG CM9A1B

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, L20C, 20L

Graco CM9A1B 61:1 Ratio 20 L L20C Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco L20c - A lightweight, elevator ram on a cart
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: L20c

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kg/cm²): 7.03
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Height (cm): 175.26
Maximum Height (ft): 5.75
Maximum Height (in): 69
Maximum Height (m): 1.75
Maximum Height (mm): 1752.6
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 421
Maximum Working Pressure (kPa): 42100
Maximum Working Pressure (MPa): 42.1
Maximum Working Pressure (psi): 6100
Minimum Height (cm): 111.76
Minimum Height (ft): 3.67
Minimum Height (in): 44
Minimum Height (m): 1.12
Minimum Height (mm): 1117.6
Overall Depth (cm): 53.34
Overall Depth (in): 21
Overall Depth (mm): 533.4
Overall Width (cm): 55.88
Overall Width (in): 22
Overall Width (mm): 558.8
Power Type: Pneumatic
Pump Ratio: 61:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$12,150.00

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

GG CM9A3B

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

61:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

$13,100.00

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, D200, 200L

GG CM9A59

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, D200, 200L

Graco CM9A59 61:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

For large drums up to 200 liter (55 gal)
Graco D200 - For high-volume in-plant applications
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: D200

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Drum
Control Panel Material: N/A
Material Container Volume (gal): 52.8
Material Container Volume (l): 200
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kg/cm²): 10.55
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Height (cm): 259.9
Maximum Height (ft): 8.53
Maximum Height (in): 102.3
Maximum Height (m): 2.6
Maximum Height (mm): 2599
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 421
Maximum Working Pressure (kPa): 42100
Maximum Working Pressure (MPa): 42.1
Maximum Working Pressure (psi): 6100
Minimum Height (cm): 164.6
Minimum Height (ft): 5.4
Minimum Height (in): 64.8
Minimum Height (m): 1.65
Minimum Height (mm): 1646
Overall Depth (cm): 63.5
Overall Depth (in): 25
Overall Depth (mm): 635
Overall Width (cm): 106.7
Overall Width (in): 42
Overall Width (mm): 1067
Power Type: Pneumatic
Pump Ratio: 61:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$19,630.00

FUSION CS GUN, RD0000

GG CS00RD

FUSION CS GUN, RD0000

Graco CS00RD Fusion CS Gun, Round Spray Pattern, 0.029 in (0.74 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Application: For high output spray polyurethane foam and polyurea applications.

New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
Removes foam and keeps mix chamber clear
Saves almost an hour of maintenance time each spray day
Easy-to-insert cartridge fits into ergonomic handle
Variable flow - an industry first
- Quick-change front - simpler and cleaner
  Air Inlet Size (cm): 0.635
  Air Inlet Size (in): 1/4
  Air Inlet Size (mm): 6.35
  Air Inlet Thread Gender: Male
  Air Inlet Thread Type: NPT
  Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  Component A Inlet Size (cm): 1.27
  Component A Inlet Size (in): 1/2-20
  Component A Inlet Size (mm): 12.7
  Component A Inlet Thread Type: UNF
  Component B Inlet Size (cm): 1.42875
  Component B Inlet Size (in): 9/16-18
  Component B Inlet Size (mm): 14.2875
  Component B Inlet Thread Type: UNF
  Component Type: Plural-Component
  Fluid Orifice Size (cm): 0.074
  Fluid Orifice Size (in): 0.029
  Fluid Orifice Size (mm): 0.74
  For Use With: Non-Flammable Foam and Polyurea
  Gun Activation: Manual
  Gun Type: Liquid-Purge
  Gun Weight (g): 1180
  Gun Weight (kg): 1.18
  Gun Weight (lb): 2.6
  Gun Weight (oz): 41.6
  Impingement Port Size (in): 0.029
  Impingement Port Size (mm): 0.70
  Includes: Mix Chamber
  Maximum Air Inlet Pressure (bar): 9
  Maximum Air Inlet Pressure (kPa): 900
  Maximum Air Inlet Pressure (MPa): 0.9
  Maximum Air Inlet Pressure (psi): 130
  Maximum Air Pressure (bar): 9
  Maximum Air Pressure (kPa): 900
  Maximum Air Pressure (MPa): 0.9
  Maximum Air Pressure (psi): 130
  Maximum Flow Rate (kg/min): 11.3
  Maximum Flow Rate (lb/min): 25
  Maximum Flow Rate @ PSI (lb/min): 25
  Maximum Fluid Pressure (bar): 241
  Maximum Fluid Pressure (kPa): 24100
  Maximum Fluid Pressure (MPa): 24.1
  Maximum Fluid Pressure (psi): 3500
  Maximum F

$4,020.00

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

GG CM9C3F

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

Graco CM9C3F 61:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
Graco S20 - For low-volume applications of medium to high-viscosity materials
Industry-first controls give you immediate and important information at the touch of a button
Platen wipers can be replaced in seconds
Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
High-quality, durable parts reduce maintenance time, maximize uptime

Model: Check-Mate
Series: S20

Ambient/Warm Melt/Hot Melt: Ambient
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Container Type: Pail
Control Panel Material: N/A
Material Container Volume (gal): 5.3
Material Container Volume (l): 20
Maximum Air Inlet Pressure (bar): 8.62
Maximum Air Inlet Pressure (kg/cm²): 8.79
Maximum Air Inlet Pressure (kPa): 862
Maximum Air Inlet Pressure (psi): 125
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.4
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Fluid Pressure (bar): 420.6
Maximum Fluid Pressure (kPa): 42060
Maximum Fluid Pressure (psi): 6100
Maximum Height (cm): 150.6
Maximum Height (ft): 4.94
Maximum Height (in): 59.3
Maximum Height (m): 1.51
Maximum Height (mm): 1506
Maximum Operating Temperature (°C): 49
Maximum Operating Temperature (°F): 120
Maximum Working Pressure (bar): 421
Maximum Working Pressure (kPa): 42100
Maximum Working Pressure (MPa): 42.1
Maximum Working Pressure (psi): 6100
Minimum Height (cm): 90.9
Minimum Height (ft): 2.98
Minimum Height (in): 35.8
Minimum Height (m): 0.91
Minimum Height (mm): 909
Overall Depth (cm): 48.26
Overall Depth (in): 19
Overall Depth (mm): 482.6
Overall Width (cm): 43.18
Overall Width (in): 17
Overall Width (mm): 431.8
Power Type: Pneumatic
Pump Ratio: 61:1
Pump Type: Priming Piston
Ram Material: Carbon Steel

$17,220.00

FUSION CS GUN, WD2222

GG CS22WD

FUSION CS GUN, WD2222

Graco CS22WD Fusion CS Gun, 8-9 in (203-229 mm) Wide Round Spray Pattern, 0.022 in (0.56 mm) Mix Chamber

Application: For high output spray polyurethane foam and polyurea applications.

New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
Removes foam and keeps mix chamber clear
Saves almost an hour of maintenance time each spray day
Easy-to-insert cartridge fits into ergonomic handle
Variable flow - an industry first
- Quick-change front - simpler and cleaner
  Air Inlet Size (cm): 0.635
  Air Inlet Size (in): 1/4
  Air Inlet Size (mm): 6.35
  Air Inlet Thread Gender: Male
  Air Inlet Thread Type: NPT
  Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
  Component A Inlet Size (cm): 1.27
  Component A Inlet Size (in): 1/2-20
  Component A Inlet Size (mm): 12.7
  Component A Inlet Thread Type: UNF
  Component B Inlet Size (cm): 1.42875
  Component B Inlet Size (in): 9/16-18
  Component B Inlet Size (mm): 14.2875
  Component B Inlet Thread Type: UNF
  Component Type: Plural-Component
  Fluid Orifice Size (cm): 0.056
  Fluid Orifice Size (in): 0.022
  Fluid Orifice Size (mm): 0.56
  For Use With: Non-Flammable Foam and Polyurea
  Gun Activation: Manual
  Gun Type: Liquid-Purge
  Gun Weight (g): 1180
  Gun Weight (kg): 1.18
  Gun Weight (lb): 2.6
  Gun Weight (oz): 41.6
  Impingement Port Size (in): 0.022
  Impingement Port Size (mm): 0.56
  Includes: Mix Chamber
  Maximum Air Inlet Pressure (bar): 9
  Maximum Air Inlet Pressure (kPa): 900
  Maximum Air Inlet Pressure (MPa): 0.9
  Maximum Air Inlet Pressure (psi): 130
  Maximum Air Pressure (bar): 9
  Maximum Air Pressure (kPa): 900
  Maximum Air Pressure (MPa): 0.9
  Maximum Air Pressure (psi): 130
  Maximum Flow Rate (kg/min): 11.3
  Maximum Flow Rate (lb/min): 25
  Maximum Flow Rate @ PSI (lb/min): 25
  Maximum Fluid Pressure (bar): 241
  Maximum Fluid Pressure (kPa): 24100
  Maximum Fluid Pressure (MPa): 24.1
  Maximum Fluid Pressure (psi):

$4,020.00

Frp Rs Chop Tip Spray 215

GG CST215

Frp Rs Chop Tip Spray 215

$160.00

Frp Rs Chop Tip, Spray, 331

GG CST331

Frp Rs Chop Tip, Spray, 331

$155.00

Frp Rs Chop Tip, Spray, 335

GG CST335

Frp Rs Chop Tip, Spray, 335

$155.00

Frp Rs Chop Tip Spray 415

GG CST415

Frp Rs Chop Tip Spray 415

$155.00

Frp Rs Chop Tip Spray 417

GG CST417

Frp Rs Chop Tip Spray 417

$155.00

Frp Rs Chop Tip, Spray, 419

GG CST419

Frp Rs Chop Tip, Spray, 419

$155.00

Frp Rs Chop Tip Spray 421

GG CST421

Frp Rs Chop Tip Spray 421

$155.00

Frp Rs Chop Tip Spray 427

GG CST427

Frp Rs Chop Tip Spray 427

$155.00

Frp Tip, Spray, 425

GG CST425

Frp Tip, Spray, 425

$155.00

Frp Rs Chop Tip Spray 431

GG CST431

Frp Rs Chop Tip Spray 431

$155.00

Frp Rs Chop Tip Spray 435

GG CST435

Frp Rs Chop Tip Spray 435

$155.00

Frp Rs Chop Tip Spray 443

GG CST443

FRP RS CHOP TIP SPRAY 443

Graco CST443 0.043 in Orifice RS Airless Spray Gun Tip with 8 in Pattern Width

$150.00

Frp Rs Chop Tip Spray 521

GG CST521

FRP RS CHOP TIP SPRAY 521

Graco CST521 0.021 in Orifice RS Airless Spray Gun Tip with 10 in Pattern Width

$150.00

Frp Rs Chop Tip Spray 523

GG CST523

Frp Rs Chop Tip Spray 523

$155.00

Frp Rs Chop Tip Spray 527

GG CST527

Frp Rs Chop Tip Spray 527

$155.00

Frp Rs Chop Tip Spray 543

GG CST543

Frp Rs Chop Tip Spray 543

$155.00

Frp Rs Chop Tip Spray 551

GG CST551

Frp Rs Chop Tip Spray 551

$155.00

Frp Rs Chop Tip, Spray, Impingement, S53

GG CSTS53

Frp Rs Chop Tip, Spray, Impingement, S53

Call for pricing

Diaphragm Kit

GG D01001

Diaphragm Kit

$150.00

KIT, BALL-C1 PT

GG D05010

KIT, BALL-C1 PT

1/2- & 3/4-inch PTFE Check Ball Kit

$203.00

KIT, DIAPHRAGM-C1 PT

GG D05001

KIT, DIAPHRAGM-C1 PT

PTFE Diaphragm Kit for 1/2- & 3/4-inch Pumps

$429.00

Kit, 515/715 In Ac, Tp, Tp, Fkpt

GG D05255

Kit, 515/715 In Ac, Tp, Tp, Fkpt

$283.00

KIT, SEAT 515/715 SS

GG D05300

KIT, SEAT 515/715 SS

1/2- & 3/4-inch 316 Stainless Steel Seat Kit

$206.00

KIT, SEAT 515/715 AC

GG D05200

KIT, SEAT 515/715 AC

1/2- & 3/4-inch Acetal Seat Kit

$136.00

Kit, 515/716 In Ss, Sp, Sp, Fkpt

GG D05366

Kit, 515/716 In Ss, Sp, Sp, Fkpt

$365.00

KIT, DIAPHRAGM-A1-SP

GG D01006

KIT, DIAPHRAGM-A1-SP

$128.00

Kit, 307 Ind Ac, Pt, Pt, Pt

GG D03211

Kit, 307 Ind Ac, Pt, Pt, Pt

$404.00

Kit, 515/715 In Ac, Bn, Bn, Fkpt

GG D05277

Kit, 515/715 In Ac, Bn, Bn, Fkpt

$350.00

Kit, 205 Ind, Pp, Sp, Pf-Pt

GG D01096

Kit, 205 Ind, Pp, Sp, Pf-Pt

$111.00

Kit, 515/716M/P Ss, Ss, Pf-Pt

GG D05330

Kit, 515/716M/P Ss, Ss, Pf-Pt

Call for pricing

KIT, DIAPHRAGM-C1 TP

GG D05005

KIT, DIAPHRAGM-C1 TP

TPE (Hytrel) Diaphragm Kit for 1/2- & 3/4-inch Pumps

$190.00

KIT, BALL-C1 SS

GG D05030

KIT, BALL-C1 SS

1/2- & 3/4-inch 316 Stainless Steel Check Ball Kit Contains 4 SST balls to fit Husky 515 and 716 pumps

$247.00

Kit, O-Ring-C1 FK-PT-8

GG D05000

KIT, O-RING-C1 FK-PT-8

Graco D05000 1/2-inch Encapsulated Viton Seal Kit

$235.00

KIT, BALL-C1 TP

GG D05050

KIT, BALL-C1 TP

1/2- & 3/4-inch TPE (Hytrel) Check Ball Kit

$125.00

Kit, 515/716 In Pp, Pt, Pt, Fkpt

GG D05911

Kit, 515/716 In Pp, Pt, Pt, Fkpt

$486.00

Kit, 515/715 In Ss, Fk, Pt, Fkpt

GG D05381

Kit, 515/715 In Ss, Fk, Pt, Fkpt

$366.00

Kit, 515/715 In PP, PT, SP, FKPT

GG D05916

Kit, 515/715 In PP, PT, SP, FKPT

$482.00

Kit, 515/715 In Pp, Bn, Bn, Fkpt

GG D05977

Kit, 515/715 In Pp, Bn, Bn, Fkpt

$261.00

Kit, 515/715 In Pp, Tp, Tp, Fkpt

GG D05955

Kit, 515/715 In Pp, Tp, Tp, Fkpt

$223.00

MIXER, STATIC, 3/8XCOMBO, 50 QTY

GG LC0081

MIXER, STATIC, 3/8XCOMBO, 50 QTY

Graco LC0081 50-Pack of 3/8 in (9.8 mm) Combo Element PosiMixer®

Disposable mixers – simply attach, dispense and dispose

Spiral mixing action thoroughly mixes two-component materials
No solvent flushing means less mess and reduced disposal expenses
Rugged, chemical-resistant mixer housing and mixing elements

Model: PR70

For Use With: PR70? Meter, Mix and Dispense Systems
Includes: (50) 3/8 x Combo Mixers
Inside Diameter (cm): 9.8
Inside Diameter (in): 3/8
Inside Diameter (mm): 98
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Mix Type: Static
Number of Pieces: 50
Orifice Diameter (in): 0.375
Outside Diameter (in): 0.5
Overall Length (cm): 34.8
Overall Length (in): 13.7
Overall Length (mm): 348

$1,215.00

PRO XP GUN, ES, AUTO REAR, SMART

GG LA1M10

PRO XP GUN, ES, AUTO REAR, SMART

Graco LA1M10 Pro Xp Auto Air Spray Electrostatic Spray Gun, 85 kV, Smart, Rear Manifold, 1.5 mm (0.055 in) Nozzle, Standard Coating

Pro Xp Auto Air Spray has an 85 kV power supply and internal power so there’s no electrical cord to damage or replace. Smart gun models connect to a control module for kV control and displaying gun performance. Ideal for low pressure, high quality spraying.

Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
85 kV power supply and internal power so there&prime, s no electrical cord to worry about damaging or replacing
Durable components reduce cost of ownership, supported by a three year warranty

Model: Pro Xp
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, Standard
Applicator Type: Automatic
Coating Type: Standard
Compatible Paint Type: Solvent borne
Display Type: Smart
Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
For Use With: Pro Xp Auto Control Module
Gun Activation: Automatic
Gun Type: Electrostatic
Gun Weight (g): 1197
Gun Weight (kg): 1.2
Gun Weight (lb): 2.64
Gun Weight (oz): 42.24
Manifold Type: Rear
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 3
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 26.92
Overall Length (in): 10.6
Overall Length (mm): 269.2

$13,630.00

PRO XP GUN, ES, AUTO BOTTOM, SMT, HC

GG LA2M16

PRO XP GUN, ES, AUTO BOTTOM, SMT, HC

Graco LA2M16 Pro Xp Auto Air Spray Electrostatic Spray Gun, 85 kV, Smart, Rear Manifold, 1.5 mm (0.055 in) Nozzle, Standard Coating

Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
85 kV power supply and internal power so there&prime, s no electrical cord to worry about damaging or replacing
Durable components reduce cost of ownership, supported by a three year warranty

Model: Pro Xp
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, Standard
Applicator Type: Automatic
Coating Type: Standard
Compatible Paint Type: High-Conductivity
Display Type: Smart
Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
For Use With: Pro Xp Auto Control Module
Gun Activation: Automatic
Gun Type: Electrostatic
Gun Weight (g): 1197
Gun Weight (kg): 1.2
Gun Weight (lb): 2.64
Gun Weight (oz): 42.24
Manifold Type: Rear
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 3
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 25.91
Overall Length (in): 10.2
Overall Length (mm): 259.1

$14,130.00

MIXER, STATIC, 3/16X32, 250 PACK

GG LC0084

MIXER, STATIC, 3/16X32, 250 PACK

Graco LC0084 250-Pack of 3/16 in (4.8 mm) x 32 Element PosiMixer®

Disposable mixers – simply attach, dispense and dispose

Spiral mixing action thoroughly mixes two-component materials
No solvent flushing means less mess and reduced disposal expenses
Rugged, chemical-resistant mixer housing and mixing elements

Model: PR70

For Use With: PR70? Meter, Mix and Dispense Systems
Inside Diameter (cm): 4.8
Inside Diameter (in): 3/16
Inside Diameter (mm): 48
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Mix Type: Static
Number of Pieces: 250
Outside Diameter (in): 0.315
Overall Length (cm): 18.8
Overall Length (in): 7.4
Overall Length (mm): 188

Call for pricing

MIXER, STATIC, 3/8X24, 250 QTY

GG LC0086

MIXER, STATIC, 3/8X24, 250 QTY

Graco LC0086 250-Pack of 3/8 in (9.8 mm) x 24 Element PosiMixer®

Disposable mixers – simply attach, dispense and dispose

Spiral mixing action thoroughly mixes two-component materials
No solvent flushing means less mess and reduced disposal expenses
Rugged, chemical-resistant mixer housing and mixing elements

Model: PR70

For Use With: PR70? Meter, Mix and Dispense Systems
Includes: (250) 3/8 x 24 Mixers
Inside Diameter (cm): 9.8
Inside Diameter (in): 3/8
Inside Diameter (mm): 98
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Mix Type: Static
Number of Pieces: 250
Orifice Diameter (in): 0.375
Outside Diameter (in): 0.5
Overall Length (cm): 24.5
Overall Length (in): 9.7
Overall Length (mm): 245

Call for pricing

PRO XP GUN, ES, AUTO REAR, SMART, HC

GG LA1M16

PRO XP GUN, ES, AUTO REAR, SMART, HC

Graco LA1M16 Pro Xp Auto Air Spray Electrostatic Spray Gun, 85 kV, Smart, Rear Manifold, 1.5 mm (0.055 in) Nozzle, High Conductive/High Wear

Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
85 kV power supply and internal power so there&prime, s no electrical cord to worry about damaging or replacing
Durable components reduce cost of ownership, supported by a three year warranty

Model: Pro Xp
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, High Conductivity, High Wear
Applicator Type: Automatic
Coating Type: High Conductivity
Compatible Paint Type: High-Conductivity
Display Type: Smart
Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
For Use With: Pro Xp Auto Control Module
Gun Activation: Automatic
Gun Type: Electrostatic
Gun Weight (g): 1197
Gun Weight (kg): 1.2
Gun Weight (lb): 2.64
Gun Weight (oz): 42.24
Manifold Type: Rear
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 3
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 26.92
Overall Length (in): 10.6
Overall Length (mm): 269.2

$16,020.00

PRO XP GUN, ES, 85KV, HC

GG L85T16

PRO XP GUN, ES, 85KV, HC

Graco L85T16 Pro Xp85 Air Spray Manual Electrostatic High Conductivity Gun, 85 kV, 0.055 in (1.5 mm) precision high wear nozzle, standard display

The ergonomic design and efficiency of this 85 kV high conductivity model can help your paint line save money and improve quality.

Application: For spraying low resistivity materials, such as abrasives and metallic coatings

Internal power supply reduces operator fatigue with no heavy cords to slow painters down.
Metal tip precision high-wear nozzle, high-wear electrode, and more durable fluid tube improve longevity.
Made in the USA
Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco&prime, s requirements

Model: Pro Xp
Series: 85

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, High Conductivity, High Wear
Applicator Type: Manual
Coating Type: Abrasive, Metallic, High Conductivity, High Wear
Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solvent borne, Urethanes
Display Type: Standard
Fluid Inlet Size (in): 3/8
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
Gun Activation: Manual
Gun Type: Electrostatic
Gun Weight (g): 676
Gun Weight (kg): 0.675
Gun Weight (lb): 1.49
Gun Weight (oz): 23.81
Includes: Air Cap, Nozzle, Tool Kit, Gun Cover, Exhaust Tube
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kg/cm²): 7.14
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kg/cm²): 7.14
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): 25
Minimum Paint Resistivity (megohm/cm): 1
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 26.67
Overall Length (in): 10.5
Overall Length (mm): 266.7

$9,630.00

Valve, Assy 1:1 Lever Elec

GG LC0005

Valve, Assy 1:1 Lever Elec

$6,550.00

Dryer, Air, Desiccant, Disposable, w/Adapt

GG LC0097

Dryer, Air, Desiccant, Disposable, w/Adapt

$275.00

Dryer, Desiccant

GG LC0098

Dryer, Desiccant

$215.00

Kit, Rebuild, Seal, Pump, Rear, Pr

GG LC0094

Kit, Rebuild, Seal, Pump, Rear, Pr

$145.00

MIXER, STATIC, 1/4X24, 50 QTY

GG LC0078

MIXER, STATIC, 1/4X24, 50 QTY

Graco LC0078 50-Pack of 1/4 in (6.5 mm) x 24 Element PosiMixer®

Disposable mixers – simply attach, dispense and dispose

Spiral mixing action thoroughly mixes two-component materials
No solvent flushing means less mess and reduced disposal expenses
Rugged, chemical-resistant mixer housing and mixing elements

Model: PR70

For Use With: PR70? Meter, Mix and Dispense Systems
Includes: (50) 1/4 x 24 Mixers
Inside Diameter (cm): 6.5
Inside Diameter (in): 1/4
Inside Diameter (mm): 65
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Mix Type: Static
Number of Pieces: 50
Orifice Diameter (in): 0.25
Outside Diameter (in): 0.375
Overall Length (cm): 18.8
Overall Length (in): 7.4
Overall Length (mm): 188

Call for pricing

7.5 L Stainless Steel Tank Lid with Pneumatic Agitator

GG LC0130

7.5 L Stainless Steel Tank Lid with Pneumatic Agitator

$6,070.00

MIXER, STATIC, 3/8X36, 50 QTY

GG LC0080

MIXER, STATIC, 3/8X36, 50 QTY

Graco LC0080 50-Pack of 3/8 in (9.8 mm) x 36 Element PosiMixer®

Disposable mixers – simply attach, dispense and dispose

Spiral mixing action thoroughly mixes two-component materials
No solvent flushing means less mess and reduced disposal expenses
Rugged, chemical-resistant mixer housing and mixing elements

Model: PR70

For Use With: PR70? Meter, Mix and Dispense Systems
Inside Diameter (cm): 9.8
Inside Diameter (in): 3/8
Inside Diameter (mm): 98
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Mix Type: Static
Number of Pieces: 50
Outside Diameter (in): 0.5
Overall Length (cm): 34.8
Overall Length (in): 13.7
Overall Length (mm): 348

Call for pricing

PRO XP GUN, ES, AUTO REAR, SMART, WBX

GG LA1M28

PRO XP GUN, ES, AUTO REAR, SMART, WBX

Pro Xp Auto Waterborne Air Spray Electrostatic Spray Gun, external charging, smart model, with rear manifold, 60 kV Pro Xp Auto waterborne air spray guns are ideal for low pressure spraying without an isolation system. 60 kV power supply and internal power so there’s no electrical cord to damage or replace. Versatile product line gives you more models to choose from and greater spraying flexibility with air spray and waterborne guns Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting 60 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing Higher transfer efficiency equals less waste, saving you money on material Durable components reduce cost of ownership, supported by a three year warranty

$15,380.00

PRO XP GUN, ES, 85KV, FIXED FLUID

GG L85T90

PRO XP GUN, ES, 85KV, FIXED FLUID

Graco L85T90 Pro Xp85 Air Spray Manual Electrostatic 85kV, standard display, HW electrode, 0.055 in (1.5 mm) PHW nozzle, fixed fluid flow, standard tube

High air flow 85 kV electrostatic spray gun models give painters the feel and reach they need to paint from a distance and around large, complex areas.

Application: For applications that require abrasive, metallic, and extremely abrasive materials – often used to coat extruded aluminum and automotive components

An electrostatic (ES) on/off with a fixed fluid valve extends electrode and nozzle life.
More durable electrodes and nozzles extend applicator life.
No fluid adjustment knob eliminates reducing fluid flow at the gun, requiring a regulator to change fluid flow.

Model: Pro Xp
Series: 85
Product Series: A

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, Abrasive, Metallic
Applicator Type: Manual
Coating Type: Abrasive, Metallic
Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solvent borne, Urethanes
Display Type: Standard
Fluid Inlet Size (in): 3/8
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
Gun Activation: Manual
Gun Type: Electrostatic
Gun Weight (g): 676
Gun Weight (kg): 0.675
Gun Weight (lb): 1.49
Gun Weight (oz): 23.81
Includes: Air Cap, Nozzle, Tool Kit, Gun Cover, Exhaust Tube
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kg/cm²): 7.14
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kg/cm²): 7.14
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 25
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 26.67
Overall Length (in): 10.5
Overall Length (mm): 266.7

$9,400.00

PRO XP GUN, ES, 85KV, SOFT SPRAY

GG L85T71

PRO XP GUN, ES, 85KV, SOFT SPRAY

Pro Xp85 Air Spray Manual Electrostatic Gun, 85 kV, 0.039 in (1.0 mm) nozzle, standard display, soft spray air cap Soft spray air cap and nozzle are ideal for small, lightweight parts that need a fine finish with minimal paint flow. Lower atomizing airflow and fluid flow help keep the part in place while it’s being sprayed. This improves transfer efficiency and finish quality on anything that’s small and lightweight.

$9,400.00

Mixer, Assembly, Shroud, 3/8-24, 10 Pack

GG LC0058

MIXER,ASSY,SHROUD,3/8-24

Graco LC0058 10-Pack of 3/8 in (9.8 mm) x 24 Element PosiMixer with Shroud

Model: PR70

Call for pricing

Two 7.5 L Stainless Steel Tanks With High and Low Sensors With Refill Logic

GG LC0284

Two 7.5 L Stainless Steel Tanks With High and Low Sensors With Refill Logic

$5,360.00

PRO XP GUN, ES, AUTO BOTTOM

GG LA2T10

PRO XP GUN, ES, AUTO BOTTOM

Graco LA2T10 Pro Xp Auto Air Spray Electrostatic Spray Gun, 85 kV, Standard, Bottom Manifold, 1.5 mm (0.055 in) Nozzle, Standard Coating

Pro Xp Auto Air Spray has an 85 kV power supply and internal power so there’s no electrical cord to damage or replace. Standard gun models always run at 85 kV power and include an alternator speed indicator to display electrostatic performance. Ideal for low pressure, high quality spraying.

Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
85 kV power supply and internal power so there&prime, s no electrical cord to worry about damaging or replacing
Durable components reduce cost of ownership, supported by a three year warranty

Model: Pro Xp
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM
Application: Electrostatic, Standard
Applicator Type: Automatic
Coating Type: Standard
Compatible Paint Type: Solvent borne
Display Type: Standard
Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
For Use With: Pro Xp Auto Control Module
Gun Activation: Automatic
Gun Type: Electrostatic
Gun Weight (g): 1197
Gun Weight (kg): 1.2
Gun Weight (lb): 2.64
Gun Weight (oz): 42.24
Manifold Type: Bottom
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7.0
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 3
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 25.91
Overall Length (in): 10.2
Overall Length (mm): 259.1

$12,610.00

Kit, Check Valve, Carbide Ball

GG LC0318

Kit, Check Valve, Carbide Ball

$105.00

10 Pack 1/2 in x 36 Element Mixer with Shroud

GG LC0296

10 Pack 1/2 in x 36 Element Mixer with Shroud

$2,640.00

Bracket, Mounting, Hmi, Pr70

GG LC0293

Bracket, Mounting, Hmi, Pr70

$1,280.00

PR70 HOSE, ASSY, FITTINGS, 1/4X120, SS

GG LC0805

PR70 HOSE, ASSY, FITTINGS, 1/4X120, SS

1/4 in x 120 in PR70 Stainless Steel Hose Package

$970.00

PR70 HOSE, ASSY, FITTINGS, 1/4X30, SS

GG LC0804

PR70 HOSE, ASSY, FITTINGS, 1/4X30, SS

1/4 in x 30 in PR70 Stainless Steel Hose Package

$655.00

Hose, 3/8in x 2.5ft

GG LC0807

Hose, 3/8in x 2.5ft

$610.00

Hose, Assy, Heated, 1/4 x 120 Inch, 240 V, 360 W, 1 R

GG LC0882

Hose, Assy, Heated, 1/4 x 120 Inch, 240 V, 360 W, 1 R

$4,530.00

Hose, Assy, Heated, Fittings, 3/8 x 120, SS

GG LC0885

Hose, Assy, Heated, Fittings, 3/8 x 120, SS

$4,660.00

PRO XPC GUN, RECIPRICATOR, STD

GG LC1020

PRO XPC GUN, RECIPRICATOR, STD

Graco LC1020 Pro Xpc Automatic Electrostatic Air Spray Gun, rear manifold for Solvent borne material, 100 kV

Pro Xpc Auto is safe, durable, PLC controllable, designed for efficient system integration and comes with a serialized certificate of performance. The system has 250 user settable presets and maintenance reminders that can be controlled from a PLC or switchbox control. This improves the flexibility of the client, who can spray with a wide variety of shapes and sizes.

Robot friendly with a weight and size that allows robots greater reach capabilities
Improve processes with switch box that makes spraying flexible
Invest in safer equipment with design features that reduce risks
System integration with nozzle tips to assemble a robot movement system or fixture

Model: Pro Xpc
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Application: Electrostatic, Solvent borne
Applicator Type: Automatic
Coating Type: Solvent borne
Compatible Paint Type: Solvent borne
Fluid Inlet Size (in): 1/4
For Use With: Pro Xpc Auto Control Module
Gun Activation: Automatic
Gun Type: Electrostatic
Gun Weight (g): 545
Gun Weight (kg): 0.545
Gun Weight (lb): 1.2
Gun Weight (oz): 19.22
Manifold Type: Rear
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 48
Maximum Fluid Temperature (°F): 120
Maximum Paint Resistivity (megohm/cm): Infinity
Minimum Paint Resistivity (megohm/cm): 1
Nozzle Size (cm): 0.15
Nozzle Size (in): 0.055
Nozzle Size (mm): 1.5
Overall Length (cm): 14.48
Overall Length (in): 5.7
Overall Length (mm): 144.8

$9,830.00