GRACO INC. S10595
GRACO INC. S10595 branded products
P2 GUN
GG GCP2R1
GG GCP2R1
P2 GUN
Probler P2 Gun Assembly with 01 Mix Chamber KitThe Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications. Easy daily maintenance Responsive trigger action Easy-to-replace mix chamber insert Anti-crossover design virtually eliminates possibility of material entering the air piston Ergonomic handle and balanced design
$4,630.00
P2 GUN
GG GCP2R3
GG GCP2R3
P2 GUN
Probler P2 Gun Assembly with 03 Mix Chamber KitThe Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications. Easy daily maintenance Responsive trigger action Easy-to-replace mix chamber insert Anti-crossover design virtually eliminates possibility of material entering the air piston Ergonomic handle and balanced design
$4,630.00
P2 GUN
GG GCP2RA
GG GCP2RA
P2 GUN
Graco GCP2RA Probler P2 Gun Assembly with AA Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Standard
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.091
- Fluid Orifice Size (in): 0.036
- Fluid Orifice Size (mm): 0.91
- Gun Activation: Manual
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: AA (0.036)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
$4,630.00
P2 GUN, ASSY, GUN, PROBLER ELITE
GG GCP3R0
GG GCP3R0
P2 GUN, ASSY, GUN, PROBLER ELITE
Probler P2 Elite Gun Assembly with 00 Mix Chamber KitThe Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications. Easy daily maintenance Responsive trigger action Easy-to-replace mix chamber insert Anti-crossover design virtually eliminates possibility of material entering the air piston Ergonomic handle and balanced design Allows use of additional accessories Alternate side block hose routings Allows filters to be easily removed
$4,630.00
P2 GUN, ASSY, GUN, PROBLER ELITE
GG GCP3R1
GG GCP3R1
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R1 Probler P2 Elite Gun Assembly with 01 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.07
- For Use With: Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
- Gun Activation: Manual
- Gun Included: 1
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 220
- Maximum Fluid Working Pressure (MPa): 22
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
$4,630.00
P2 GUN, ASSY, GUN, PROBLER ELITE
GG GCP3R2
GG GCP3R2
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R2 Probler P2 Elite Gun Assembly with 02 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.132
- Fluid Orifice Size (in): 0.052
- Fluid Orifice Size (mm): 1.32
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 02 (.05
$4,630.00
P2 GUN, ASSY, GUN, PROBLER ELITE
GG GCP3R3
GG GCP3R3
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R3 Probler P2 Elite Gun Assembly with 03 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.152
- Fluid Orifice Size (in): 0.060
- Fluid Orifice Size (mm): 1.52
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 03 (.06
$4,630.00
P2 GUN, AUTOMATIC
GG GCP4R0
GG GCP4R0
P2 GUN, AUTOMATIC
Graco GCP4R0 Probler P2 Automatic Gun with 00 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.074
- Fluid Orifice Size (in): 0.029
- Fluid Orifice Size (mm): 0.74
- Gun Activation: Automatic
- Gun Series: Automatic
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 00 (.029)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): <
$6,930.00
P2 GUN, ASSY, GUN, PROBLER ELITE
GG GCP3RA
GG GCP3RA
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3RA Probler P2 Elite Gun Assembly with AA Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.091
- Fluid Orifice Size (in): 0.036
- Fluid Orifice Size (mm): 0.91
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: AA (0.0
$4,630.00
DURA-FLO SUPPLY UNIT, 10:1, 3.0 RAM, 200L
GG GDG959
GG GDG959
DURA-FLO SUPPLY UNIT, 10:1, 3.0 RAM, 200L
Supply Unit, Dura-Flo, 10:1, 3 in. Ram, 200L, Single EPDM WiperGraco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials For large drums up to 200 liter (55 gal) Graco D200 - For high-volume in-plant applications Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime
$32,290.00
P2 GUN, AUTOMATIC
GG GCP4R1
GG GCP4R1
P2 GUN, AUTOMATIC
Probler P2 Automatic Gun with 01 Mix Chamber KitThe Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications. Easy daily maintenance Responsive trigger action Easy-to-replace mix chamber insert Anti-crossover design virtually eliminates possibility of material entering the air piston Ergonomic handle and balanced design
$6,930.00
AA Tip
GG GG3411
GG GG3411
TIP, SPRAY,AA4500
Graco GG3411 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.279 mm Orifice, 200-250 mm Fan Width
$333.00
Tip
GG GG3413
GG GG3413
TIP, SPRAY,AA4500
Graco GG3413 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.330 mm Orifice, 200-250 mm Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
$333.00
AA Tip
GG GG3415
GG GG3415
TIP, SPRAY,AA4500
Graco GG3415 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.381 mm Orifice, 200-250 mm Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
$333.00
Tip
GG GG3513
GG GG3513
TIP, SPRAY,AA4500
Graco GG3513 10-12 in (250 mm) Fan Width, .013 in (.330 mm) Orifice Size Spray Tip for Pro Xs4 AA Spray Gun
$360.00
AA Tip
GG GG4411
GG GG4411
TIP, SPRAY
Graco GG4411 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
$217.50
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
GG GG4413
GG GG4413
TIP, SPRAY
Graco GG4413 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solventborne, Waterborne
$217.50
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
GG GG4415
GG GG4415
TIP, SPRAY
Graco GG4415 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
$217.50
AA Tip
GG GG4515
GG GG4515
TIP, SPRAY
Graco GG4515 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
$217.50
AA Tip
GG GG4513
GG GG4513
TIP, SPRAY
Graco GG4513 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
$217.50
AA Tip
GG GG4517
GG GG4517
TIP, SPRAY
Graco GG4517 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
$217.50
AA Tip
GG GG4615
GG GG4615
TIP, SPRAY
Graco GG4615 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
$217.50
MANIFOLD, ASSY, CC, 3 VALVE, LP, CIRC
GG 24Y939
GG 24Y939
MANIFOLD, ASSY, CC, 3 VALVE, LP, CIRC
3 Valve SST Low Pressure Circulating Valve Low Pressure Non-Circulating Valve
$3,410.00
Manifold, Assembly, CC, 4 Valve, Lp
GG 24Y940
GG 24Y940
MANIFOLD,ASSY,CC,4 VALVE,LP
Graco 24Y940 4 Valve SST Low Pressure Non-Circulating Valve
$4,530.00
Manifold, Assembly, CC, 5 Valve, Lp
GG 24Y942
GG 24Y942
MANIFOLD,ASSY,CC,5 VALVE,LP
Graco 24Y942 5 Valve SST Low Pressure Non-Circulating Valve
$5,800.00
Manifold, Assembly, CC, 5 Valve, Lp, Circ
GG 24Y943
GG 24Y943
MANIFOLD,ASSY,CC,5 VALVE,LP,CIRC
Graco 24Y943 5 Valve SST Low Pressure Circulating Valve
$6,130.00
PROMIX 2KE PROPORTIONER, METER, ACID
GG 24Z014
GG 24Z014
PROMIX 2KE PROPORTIONER, METER, ACID
ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, IS, intrinsically safe alternator power The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate. Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion. Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
$33,510.00
PROMIX 2KE PROPORTIONER, METER, ACID
GG 24Z016
GG 24Z016
PROMIX 2KE PROPORTIONER, METER, ACID
Graco 24Z016 ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, non intrinsically safe AC powered
The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.
- Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
- Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
- Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter
- Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
- Model: ProMix
- Series: 2KE
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 3 Color, 1 Catalyst, Non Intrinsically Safe AC Powered
- Material Type: Two Component
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Fluid Viscosity (cP): 5000
- Maximum Fluid Viscosity (cP): 5000
- Maximum Number of Colors: Up to 3
- Maximum Working Pressure (bar): 206.8
- Maximum Working Pressure (kPa): 20680
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Measuring Type: Meter
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: N/A
- Number of Colors: 3
- Number of Resin Colors: 3
- Power Source: Electric
- Proportioning Type: Manual Electronic
- Pump Ratio: Meter only
$32,580.00
CSP VALVE, 16 OUTLET, NPT, IND, PKG
GG 24Z509
GG 24Z509
CSP VALVE, 16 OUTLET, NPT, IND, PKG
CSP Divider Valve, 1/8 inch NPT, 16 Outlets, Indicator IncludedCompact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.
1/8 inch NPT inlet Space efficient design with 16 outlets, with indicator Outlets can be combined to meet larger bearing needs Built-in durability with Zinc Iron plating to stand up to harsh environments High output pressure - maximum working pressure of 5,076 psi (350 bar) for both oil and grease
$520.00
GREASE JOCKEY INJECTOR, MTR, ASSY, #4
GG 24Z686
GG 24Z686
GREASE JOCKEY INJECTOR, MTR, ASSY, #4
Grease Jockey® Injector - #4, 4 Output Spacers, 0.015 cu in (0.25 cc)Designed for frequent, medium-pressure metering and includes system pressure monitoring.
For use with Grease Jockey Lubrication Solutions. Two piece compression fitting included for fast, easy installation. Bundled system tubing available for easy installation. Threaded outlet allows for manifold mounting. Adjustable output volume. Grease Jockey Injector Size #4 4 Output Spacers
$47.10
LUBEPRO A2800 PUMP, OIL, 2.0L, N.C, LL
GG 24Z028
GG 24Z028
LUBEPRO A2800 PUMP, OIL, 2.0L, N.C, LL
LubePro™ A2800 Vertical Oil Pumps, 2 liter Reservoir, Normally Closed, Low Level - NPTWithout proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.
Single Stroke Oil Pump for Automatic Lubrication LubePro A2800 is compatible with GL-1, GL-32 and GL-33 injectors Pressure Ratio of 28:1 A2800 delivers a greater output than competitive models at 0.56 in³ (9.18 cm³) per stroke Pneumatic power makes it easy to install into existing air line Factory installed Low Level Detection available Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required Built with high-quality seals tested to outperform the competition High-strength, shatter resistant, 2 liter reservoir Optimally lubricates while your machines are running Provides accurate, reliable lubrication for every lube point Provides higher lube output and faster lubrication cycle
$1,320.00
KIT, CONTROLLER-VOLT, BELL-SB
GG 24Z098
GG 24Z098
KIT, CONTROLLER-VOLT, BELL-SB
Graco 24Z098 ProBell Electrostatic Controller for Solvent borne. Maximum voltage output at applicator is 100 kV.
Electrostatic Controller, for waterborne applications, includes power supply cord and I/O cable
- Voltage and current can be independently adjusted to meet specific manufacturing requirements
- Full system integration with PLC or switch box control
- Improves safety by automatically shutting off electrostatics when the part is too close to the gun
- Model: ProBell
$8,720.00
PROMIX 2KE PROPORTIONER, METER, ACID
GG 24Z013
GG 24Z013
PROMIX 2KE PROPORTIONER, METER, ACID
Graco 24Z013 ProMix 2KE Acid Catalyst Meter, 1 color/1 catalyst, IS, intrinsically safe alternator power
The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.
- Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
- Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
- Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter
- Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
- Model: ProMix
- Series: 2KE
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 1 Color, 1 Catalyst, Intrinsically Safe Alternator Power
- Material Type: Two Component
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Fluid Viscosity (cP): 5000
- Maximum Fluid Viscosity (cP): 5000
- Maximum Number of Colors: Up to 3
- Maximum Working Pressure (bar): 206.8
- Maximum Working Pressure (kPa): 20680
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Measuring Type: Meter
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: N/A
- Number of Colors: 1
- Number of Resin Colors: 1
- Power Source: Electric
- Proportioning Type: Manual Electronic
- Pump Ratio: Meter only
$30,080.00
Kit, Repair, Tof 200 Platen Rtd
GG 24Z095
GG 24Z095
KIT,REPAIR,TOF 200 PLATEN RTD
KIT INCLUDES: HARNESS, INPUT, MZLP1, RTD, OT, TOF [QTY. 1], CONNECTOR, 3 CONDUCTOR, LEVERLOCK [QTY. 1], CONNECTOR, 2 CONDUCTOR, LEVERLOCK [QTY. 2], SENSOR, RTD, W/600V HEATSHRINK [QTY. 1], FERRULE, LT BLUE, 24AWG [QTY. 2]
$1,360.00
PROMIX 2KE PROPORTIONER, METER, ACID
GG 24Z015
GG 24Z015
PROMIX 2KE PROPORTIONER, METER, ACID
ProMix 2KE Acid Catalyst Meter, 1 color/1 catalyst, non intrinsically safe alternator power The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate. Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion. Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
$28,740.00
CSP VALVE, 8 OUTLET, NPT, PKG
GG 24Z487
GG 24Z487
CSP VALVE, 8 OUTLET, NPT, PKG
Graco 24Z487 CSP Divider Valve, 1/8 inch NPT, 8 Outlets
Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.
- 1/8 inch NPT inlet
- Space efficient design with 8 outlets, without indicator
- Outlets can be combined to meet larger bearing needs
- High output pressure - maximum working pressure of 5,076 psi (350 bar) for both oil and grease
- Model: Trabon
- Series: CSP
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): N/A
- Divider Valve Series: CSP
- Inlet Size (cm): 0.3175
- Inlet Size (in): 1/8
- Inlet Size (mm): 3.175
- Inlet Thread Type: NPT
- Material: Carbon Steel
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 100
- Maximum Operating Temperature (°F): 212
- Maximum Working Pressure (bar): 350
- Maximum Working Pressure (kPa): 35000
- Maximum Working Pressure (psi): 5076
- Minimum Output Volume (cm³): 0.2
- Minimum Working Pressure (bar): 15
- Minimum Working Pressure (kPa): 1500
- Minimum Working Pressure (psi): 217.5
- Number of Outlets: 8
- Outlet Thread Gender: Female
- Outlet Thread Type: NPT
$202.50
Lsr Valve, 2-Way, Pneu, Sst, 3K Max
GG 24Z119
GG 24Z119
Lsr Valve, 2-Way, Pneu, Sst, 3K Max
$1,380.00
CSP VALVE, 6 OUTLET, NPT, IND, PKG
GG 24Z504
GG 24Z504
CSP VALVE, 6 OUTLET, NPT, IND, PKG
CSP Divider Valve, 1/8 inch NPT, 6 Outlets, Indicator IncludedCompact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.
1/8 inch NPT inlet Space efficient design with 6 outlets, with indicator Outlets can be combined to meet larger bearing needs Built-in durability with Zinc Iron plating to stand up to harsh environments High output pressure - maximum working pressure of 5,076 psi (350 bar) for both oil and grease
$198.00
CSP VALVE, 6 OUTLET, NPT, PKG
GG 24Z486
GG 24Z486
CSP VALVE, 6 OUTLET, NPT, PKG
Graco 24Z486 CSP Divider Valve, 1/8 inch NPT, 6 Outlets
Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.
- 1/8 inch NPT inlet
- Space efficient design with 6 outlets, without indicator
- Outlets can be combined to meet larger bearing needs
- High output pressure - maximum working pressure of 5,076 psi (350 bar) for both oil and grease
- Model: Trabon
- Series: CSP
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): N/A
- Divider Valve Series: CSP
- Inlet Size (cm): 0.3175
- Inlet Size (in): 1/8
- Inlet Size (mm): 3.175
- Inlet Thread Type: NPT
- Material: Carbon Steel
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 100
- Maximum Operating Temperature (°F): 212
- Maximum Working Pressure (bar): 350
- Maximum Working Pressure (kPa): 35000
- Maximum Working Pressure (psi): 5076
- Minimum Output Volume (cm³): 0.2
- Minimum Working Pressure (bar): 15
- Minimum Working Pressure (kPa): 1500
- Minimum Working Pressure (psi): 217.5
- Number of Outlets: 6
- Outlet Thread Gender: Female
- Outlet Thread Type: NPT
$160.50
PULSE PRO PUMP AIR CONTROL VALVE, NPT
GG 24Z728
GG 24Z728
PULSE PRO PUMP AIR CONTROL VALVE, NPT
Pulse® Pump Air Control - NPT with NEMA 5-15 PlugGraco’s Pulse® Pump Air Control (PAC) is integral to the Pulse fluid management system. These reliable devices prevent unauthorized access to fluid inventory.
Ensure better inventory control Built with Graco quality for a long life When combined with other components of the Pulse fluid management system you’ll improve shop efficiency Flexible—the PAC supports a variety pneumatic of pumps Installs easily—built-in mounting bracket Simple wireless setup—automatically identifies networks High-volume air valve supports a variety of pump
$1,485.00
KIT, COVER, FRONT, NO LOGO, CLEAR
GG 24Z962
GG 24Z962
KIT, COVER, FRONT, NO LOGO, CLEAR
Graco 24Z962 Electric Grease Jockey® Pump Protective Pump Cover
Application: For increased control panel impact protection on Electric Grease Jockey, G3, and G1 Automatic Lubrication Pumps
- Protective pump cover
- Model: Grease Jockey
- For Use With: Grease Jockey Pumps
- Number of Pieces: 3
$65.00
T3 PUMP, CS
GG 24Z834
GG 24Z834
T3 PUMP, CS
T3 Supply Pump (Carbon Steel): 3:1 Fluid to Air Ratio Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required. Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig. More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump. Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switchingis purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanicalreversing mechanism in the air-motor
$1,695.00
Kit, Repair, Brg, Helical Flwmtr
GG 253215
GG 253215
KIT, REPAIR, BRG, HELICAL FLWMTR
KIT INCLUDES: HOUSING, MIDDLE, HELICAL GEAR MTR [QTY. 1], INSERT, BEARING, HELICAL GEAR MTR [QTY. 2], INSERT, BEARING, HELICAL GEAR MTR [QTY. 1], BEARING, GEAR [QTY. 3], BALL, BEARING [QTY. 3], O-RING, SEAL, HELICAL GEAR METER [QTY. 2], LUBRICANT, GREASE [QTY. 1], PIN, DOWEL, .550 in. [QTY. 2], PIN, DOWEL, .750 in. [QTY. 2]
$2,290.00
Kit, Repair, Hose/Spring Tof55
GG 253289
GG 253289
KIT,REPAIR,HOSE/SPRING TOF55
KIT INCLUDES: HOSE, FOLLOWER, 1 in. [QTY. 2], CLAMP, TIRE [QTY. 1]
$1,695.00
Kit, Repair, Throat Seal, Hotmlt
GG 253545
GG 253545
KIT,REPAIR,THROAT SEAL,HOTMLT
KIT INCLUDES: NUT, PACKING [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SEAL, BACK-UP [QTY. 1], PACKING, O-RING [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], WASHER, SCRAPER, GREASE ZONE [QTY. 1], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1]
$986.00
Pump, Disp, Recip, Max WPR 1000PS
GG 253597
GG 253597
PUMP, DISP, RECIP MAX WPR 1000PS
Graco 253597 Dura-Flo 1000 cc Lower, Carbon Steel, UHMWPE/Leather Packings
$10,280.00
KIT, DIAPHRAGM, PTFE-EPDM, 1040
GG 253626
GG 253626
KIT, DIAPHRAGM, PTFE-EPDM, 1040
PTFE/EPDM Overmold Diaphragm Kit for 1-inch Pump
$1,045.00
Frame, Accy, Stand, Pump
GG 253692
GG 253692
FRAME, ACCY, STAND, PUMP
Graco 253692 Floor Stand for NXT, E-Flo DC and Viscount Motors (750-2000 cc)
$1,405.00
Kit, Repair, Packing
GG 253744
GG 253744
KIT, REPAIR, PACKING
Graco 253744 UHMWPE and Leather Packings Repair Kit, for Dura-Flo 1800 (standard for 249992, L430SM, L430CM)
KIT INCLUDES: GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], PACKING, VEE, UHMWPE, SUBMICRON [QTY. 2], GLAND, PACKING, MALE [QTY. 1], PACKING, VEE, LEATHER [QTY. 4 ], PACKING, O-RING [QTY. 1], SEAL, ACETAL [QTY. 2], PACKING, O-RING [QTY. 1]
$1,230.00
Kit, Repair, Packings
GG 253745
GG 253745
KIT, REPAIR, PACKINGS
Graco 253745 UHMWPE and Leather Packings Repair Kit, for Dura-Flo 2400 (standard for 249991, L580SM)
KIT INCLUDES: PACKING, VEE [QTY. 3], GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE [QTY. 3], GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE, UHMWPE, [QTY. 2], PACKING, VEE, LEATHER [QTY. 4 ], PACKING, O-RING [QTY. 1], SEAL, ACETAL [QTY. 2], PACKING, O-RING [QTY. 1]
$652.00
KIT, DIAPHRAGM-F2 PT
GG 255060
GG 255060
KIT, DIAPHRAGM-F2 PT
PTFE Diaphragm Kit for 1.5-inch Pump
$994.00
KIT, REPAIR, AIR VALVE, SST
GG 255061
GG 255061
KIT, REPAIR, AIR VALVE, SST
Air Valve Repair Kit
$125.00
Kit, Bracket, Mounting
GG 255143
GG 255143
KIT, BRACKET, MOUNTING
Graco 255143 NXT Wall Mounting Kit
$740.00
Kit, Repair, Seat/Needle
GG 255160
GG 255160
KIT, REPAIR,SEAT/NEEDLE
Graco 255160 Needle/ Seat Repair Kit for G40 Air Assisted Spray Gun
$315.00
MD2 Valve, Dispense, 1:1, Soft Seats
GG 255179
GG 255179
MD2 Valve, Dispense, 1:1, Soft Seats
MD2 Valve, 1:1 Ratio, Soft Seat, Adjustable Snuff-back Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production. Static valve reliably dispenses and mixes a wide range of 2 component sealants and adhesives. 1:1 ratio nose handles a wide range of material. Soft seats with ultra-high molecular weight polyethylene (UHMWPE) seals are good for precise snuff-back control. Snuff-back control prevents dripping as it brings material back into the valve until next dispense. Adjustable snuff-back control finetunes shut-off performance for a clean bead dispense. Maximum flow rate is 25 cc/s, depending on material viscosity. Independent air cylinder improves mean time to repair (MTTR). No unique tools are required for maintenance or repair.
$5,230.00
MD2 Valve, Dispense, 1:1 Hard Seats
GG 255180
GG 255180
MD2 Valve, Dispense, 1:1 Hard Seats
MD2 Valve, 1:1 Ratio, Hard Seat, Non-adjustable Snuff-back Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production. Static valve reliably dispenses and mixes a wide range of 2 component sealants and adhesives. 1:1 ratio nose handles a wide range of material. Carbide hard seats and hardened needles are good for abrasive material and stall against pressure applications. Snuff-back control prevents dripping as it brings material back into the valve until next dispense. Non-adjustable snuff-back control keeps shut-off performance consistent for a clean bead dispense. Maximum flow rate is 25 to 30 cc/s, depending on material viscosity. No unique tools are required for maintenance or repair. Grease isolation chamber protects moisture sensitive materials and has accessible grease fittings for easy maintenance
$5,230.00
MD2 VALVE, DISPENSE, 10:1 HARD SEATS
GG 255182
GG 255182
MD2 VALVE, DISPENSE, 10:1 HARD SEATS
MD2 Valve, 10:1 Ratio, Hard Seat, Non-adjustable Snuff-back Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production. Static valve reliably dispenses and mixes a wide range of 2 component sealants and adhesives. 10:1 ratio nose handles a wide range of material. Carbide hard seats and hardened needles are good for abrasive material and stall against pressure applications. Snuff-back control prevents dripping as it brings material back into the valve until next dispense. Non-adjustable snuff-back control keeps shut-off performance consistent for a clean bead dispense. Maximum flow rate is 25 to 30 cc/s, depending on material viscosity. No unique tools are required for maintenance or repair. Grease isolation chamber protects moisture sensitive materials and has accessible grease fittings for easy maintenance
$6,040.00
KIT, REPAIR, PUMP
GG 255204
GG 255204
KIT, REPAIR, PUMP
Graco 255204 210ES Pump Repair Kit
All packing&prime, s should be replaced at one time to keep wear even. For use with Graco models 190ES, 210ES or other Graco 200 series sprayers. Kit includes all components to replace the packing set for the pump
Application: The Graco Endurance Pump Repair Kit extends the life of your sprayer. Preventive maintenance lowers ownership costs and reduces downtime. Replace the wear parts in the pump when there is noticeable loss of pressure or if fluid is leaking out of the front of the sprayer.- All packing&prime, s should be replaced at one time to keep wear even
- For use with Graco models 190ES, 210ES or other Graco 200 series sprayers
- Keep a spare kit on hand to minimize sprayer downtime
- For Use With: Pro190ES Cart, Pro190ES Stand, Pro210ES Cart, Pro210ES Stand, Pro230ES Stand, Pro230ES Cart, Pro270ES Stand, Pro270ES Cart, Pro270GS
$96.50
HANDLE, 2K DISP. VALVE, ELEC.
GG 255208
GG 255208
HANDLE, 2K DISP. VALVE, ELEC.
Graco 255208 MD2 Valve Electric Switch Handle
Convert any MD2 valve to a hand held valve with an internal normally open switch
$1,125.00
LEVER, 2K DISPENSE VALVE
GG 255249
GG 255249
LEVER, 2K DISPENSE VALVE
Graco 255249 2K Dispense Valve Lever
- Model: PR70
- For Use With: MD2 Valve Handle
- Product Type: Actuated Lever
$1,930.00