GRACO INC. S10595
GRACO INC. S10595 branded products
VALVE, BALL, 2W, 1/8NPT, M, LP, BRS
GG 94/0809/96
GG 94/0809/96
VALVE, BALL, 2W, 1/8NPT, M, LP, BRS
$475.00
Adapter, Ndl, Ll, 10-32, M, Chrome Pl
GG 94/0860/96
GG 94/0860/96
Adapter, Ndl, Ll, 10-32, M, Chrome Pl
$48.00
SHROUD MIXER 1/4X24EL 7/8-9
GG 94/0880-C/98
GG 94/0880-C/98
SHROUD MIXER 1/4X24EL 7/8-9
Call for pricing
Adapter, Elbow, Jic04X1/4Npt, Mm
GG 94/1020/98
GG 94/1020/98
Adapter, Elbow, Jic04X1/4Npt, Mm
$105.00
Adapter, Jic06X3/8Npt, Mm, Ss, 6K, 316
GG 94/1007/98
GG 94/1007/98
Adapter, Jic06X3/8Npt, Mm, Ss, 6K, 316
$91.50
Kit, Rebuild 2K2
GG 949634
GG 949634
KIT, REBUILD 2K2
KIT INCLUDES: BEARING, SLEEVE 1/4, 3/8, 1/4NYL [QTY. 2], PACKING, O-RING [QTY. 2], PIN, DOWEL 1/8 X 1.25 18-8 SST [QTY. 1], NUT, LOCK [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 2], PACKING, O-RING [QTY. 2], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 2], BEARING, LUBE 2K2 [QTY. 2], SEAL, U-CUP POLYMT 1/4, 1/2, 1/4 [QTY. 2], NEEDLE, 2K2 SST HARDENED [QTY. 2], GASKET, AIR MANIFOLD [QTY. 1], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1], PACKING, O-RING [QTY. 2], INSERT, SUFF-BACK, 2K2 [QTY. 2], RESTRICTOR, 2K2 3/64 I.D. [QTY. 3], RESTRICTOR, 2K2 1/8 I.D. [QTY. 3], PIN, DOWEL 3/32 X 3/8 18-8 SST [QTY. 4 ], PACKING, O-RING [QTY. 3], PACKING, O-RING [QTY. 2], GASKET, SEAT [QTY. 2], SEAT, VALVE [QTY. 2]
$1,050.00
G1 STANDARD PUMP, G-24NC-2L0A00-LD000000
GG 94G039
GG 94G039
G1 STANDARD PUMP, G-24NC-2L0A00-LD000000
Graco 94G039 G1™ Standard Grease Lubrication Pump, 24 VDC, 2 Liter, DIN, Wiper, Low Level
Simple solution. Sophisticated results. Choose the user friendly Graco G1 Pump when you need a reliable, simple alternative to manual lubrication. Work smarter and get better productivity from your equipment with G1 Series lubrication pumps.
Application: Automatic Lubrication for Series Progressive Metering Systems- G1 Standard has no internal controller for a low cost solution.
- 2 liter reservoir
- Connect to 24 VDC
- Hard Working Pump - G1 comes with one pump element installed that reliably delivers lubricant when you need it.
- Achieve Uninterrupted Material Flow - With its advanced flow dynamics the contoured base flows lubricants directly to the pump inlet, significantly reducing stagnant areas where grease can separate.
- Experience Our Long Life Design - Engineered offset drive design minimizes load and stress on the motor and pump element.
- Model: G1
- Series: Standard
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Control Options: Standard
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- Includes: Wiper Arm, External Low Level
- IP Rating: IP69K
- Maximum Flow Rate (ci/min): 0.25
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V dc): 32
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V dc): 18
- Number of Pump Elements: 1
- Overall Depth (cm): 22.9
- Overall Depth (in): 9
- Overall Depth (mm): 229
- Overall Height (cm): 33.7
- Overall Height (in): 13.25
- Overall Height (mm): 337
- Overall Width (cm): 20.3
- Overall Width (in): 8
- Overall Width (mm): 203
- Power Connection Type: DIN
- Power Type: Electric
Call for pricing
Posipak, 3/8 Id x 5/8 OD, Std, P/Vit
GG 95/0849/11
GG 95/0849/11
Posipak, 3/8 Id x 5/8 OD, Std, P/Vit
$67.50
SEAL, POSPK, 1/16ID X 5/16OD, STD, P
GG 95/0893/11
GG 95/0893/11
SEAL, POSPK, 1/16ID X 5/16OD, STD, P
$79.50
Repair Kit
GG 95/1661/50
GG 95/1661/50
REPAIR KIT,TWINMIXER3,STD ACT,
KIT INCLUDES: SEAL, POSPK, 1/4IDX1/2OD, STD, P/V [QTY. 2], SEAL, POSIPAK, .250IDX.437OD, ZAP [QTY. 4 ], O-RING, QUAD, BUNA, 218, 70A [QTY. 1], O-RING, TES, 015, 70A [QTY. 6 ], O-RING, BUNA, 126, 70A [QTY. 1], O-RING, BUNA, 007, 70A [QTY. 1], O-RING, QUAD, BUNA, 010, 70A [QTY. 2], GASKET, 10-32 FITTING [QTY. 2], LUBRICANT, GREASE, KRYTOX [QTY. 1]
$835.00
SEAL ASSY, SPOOL, PD, 1.5B, 1/8DIA, LOW, P/VIT
GG 95/2865-11/25
GG 95/2865-11/25
SEAL ASSY, SPOOL, PD, 1.5B, 1/8DIA, LOW, P/VIT
$320.00
Seal Assy, Cylinder, Drive, PD3
GG 95/2980-01/25
GG 95/2980-01/25
Seal Assy, Cylinder, Drive, PD3
$115.00
PRESIDENT PUMP, 10:1
GG 954088
GG 954088
PRESIDENT PUMP, 10:1
President 10:1 SST Air Spray Pump The President 10:1 is ideal for locations when pumping directly from the drum is required. The proven configuration is ideal for smooth to heavily aggregated materials containing silica sand, perlite, vermiculite or polystyrene. Ideal for truck, trailer, or inplant locations, it features a high-output piston pump and EvenFlow Valve for consistent spray delivery. EvenFlow Valve- Easy Set-up & Operation
- Smooth, even material flow with air regulators and pressure gauges
- Time-Saving Production Ratios
- Pump is preloaded with material from lower submerged foot valve position
- Texture delivery rates to 3.0 gpm (11 lpm) at 1000 psi (69 bar)
- Available in both carbon steel and stainless steel
- Maintenance-Free Design
- Proven air motor delivers years of reliable, dependable operation
- Easy Drum Mounting
- Save space in your truck or on the job by mounting directly to material containers
- Use in open or closed head drums
$11,140.00
Bumper, Rubber, 3/8-16X0.63, 1.25Di
GG 96/0507/11
GG 96/0507/11
Bumper, Rubber, 3/8-16X0.63, 1.25Di
$295.00
REGULATOR, MASTIC, 5000 PSI
GG 961635
GG 961635
REGULATOR, MASTIC, 5000 PSI
Graco 961635 Air Operated Mastic Fluid Pressure Regulator
The mastic regulator is ideal for low to high viscosity sealants or adhesives
Application: These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.- Actuation Type: Air
- Flow Control Type: Regulation
- Gauge Port Size (cm): 1.905
- Gauge Port Size (in): 3/4
- Gauge Port Size (mm): 19.05
- Gauge Port Type: NPT
- Inlet Size (cm): 1.905
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- Maximum Regulated Pressure (bar): 310
- Maximum Regulated Pressure (kPa): 31000
- Maximum Regulated Pressure (MPa): 31.0
- Maximum Regulated Pressure (psi): 4500
- Maximum Viscosity (cP): 80000
- Maximum Working Pressure (bar): 344
- Maximum Working Pressure (kPa): 34400
- Maximum Working Pressure (MPa): 34.4
- Maximum Working Pressure (psi): 5000
- Minimum Regulated Pressure (bar): 17
- Minimum Regulated Pressure (kPa): 1700
- Minimum Regulated Pressure (MPa): 1.7
- Minimum Regulated Pressure (psi): 250
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: NPT
$2,890.00
G3 PRO PUMP, A-ACPR-2L0L00-0D000000
GG 96G079
GG 96G079
G3 PRO PUMP, A-ACPR-2L0L00-0D000000
G3® Pro Oil Lubrication Pump, 90-240 VAC, 2 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up
$2,090.00
G3 PRO PUMP, A-ACPR-4L0L00-0D000000
GG 96G080
GG 96G080
G3 PRO PUMP, A-ACPR-4L0L00-0D000000
G3® Pro Oil Lubrication Pump, 90-240 VAC, 4 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up
$2,360.00
Kit, Rod Assembly, PD44, 8.00, SS/UHM
GG 964244
GG 964244
Kit, Rod Assembly, PD44, 8.00, SS/UHM
$3,020.00
ULTRA-LITE 1K VALVE, UL, MACHINE MOUNT
GG 965786
GG 965786
ULTRA-LITE 1K VALVE, UL, MACHINE MOUNT
Graco 965786 1k Ultra-Lite Aluminum Machine Mount Valve
Precision Dispense Valve for Quality Bead Dispensing
- Lightweight and compact
- Designed for long service
- Aluminum wetted parts
- Model: Ultra-Lite
- Series: 1K
- Air Inlet Size (in): 1/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Gun Activation: Automatic
- Maximum Viscosity (cP): 1000000
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (kg/cm²): 281.2
- Maximum Working Pressure (kPa): 27600
- Maximum Working Pressure (psi): 4000
$2,590.00
FIREBALL 425 PUMP, 10:1
GG 965129
GG 965129
FIREBALL 425 PUMP, 10:1
Graco 965129 Fire-Ball® 425 Series 10:1 400 lb (180 kg). Air-Powered Grease Pump
The Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.
Application: The Fire-Ball 425 is the pump of choice for your most demanding high volume applications.- Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.
- Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.
- Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated &Prime, dirty&Prime, air environments for long life without repair.
- Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
- Model: Fire-Ball
- Series: 425
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Motor Effective Diameter (in): 4.25
- Application: Industrial
- Compatible Material: Grease
- Cycles Per Gallon: 20
- Fluid Inlet Type: Slotted
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- For Use With: Grease
- Maximum Air Inlet Pressure (bar): 12.41
- Maximum Air Inlet Pressure (kPa): 1241
- Maximum Air Inlet Pressure (psi): 180
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 3.5
- Maximum Flow Rate (L/min): 13.25
- Maximum Intermittent Cycle Rate (CPM): 60
- Maximum Working Pressure (bar): 124
- Maximum Working Pressure (kPa): 12400
- Maximum Working Pressure (MPa): 12.4
- Maximum Working Pressure (psi): 1800
- Power Type: Pneumatic
- Pump Ratio: 10:1
$10,150.00
G3 PRO PUMP, G-ACPR-120L00-0D000000
GG 96G077
GG 96G077
G3 PRO PUMP, G-ACPR-120L00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 12 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up
$2,800.00
SANIFORCE PISTON PUMP, TARY 5:1
GG 965520
GG 965520
SANIFORCE PISTON PUMP, TARY 5:1
5:1 Ratio Stubby Double Ball Sanitary PumpDesigned for high production applications, Monark pumps provides uniform and easily controlled delivery with its reliable Monark air motor.
Drum and stubby length models available for mounting and application flexibility Positive displacement, 2-ball piston design provides uniform and easily controlled delivery Stainless steel or carbon steel models available to handle various fluids Fluid return stanchion for circulation back to the pump Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids
$13,040.00
G3 STANDARD PUMP, G-24NC-4L0A00-L0C00000
GG 96G048
GG 96G048
G3 STANDARD PUMP, G-24NC-4L0A00-L0C00000
Graco 96G048 G3™ Standard Grease Lubrication Pump, 24 VDC, 4 Liter, External Low Level, CPC
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- No internal controller–use with separate or existing machine control for a low cost solution
- Capable of sending a low level signal to your external controller or PLC
- Model: G3
- Series: Standard
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Control Options: Standard
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- For Use With: Injector-Based Systems, Series Progressive Systems
- Includes: Wiper Arm, External Low Level
- IP Rating: IP69K
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V dc): 32
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V dc): 18
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 25.4
- Overall Depth (in): 10
- Overall Depth (mm): 254
- Overall Height (cm): 36.8
- Overall Height (in): 14.5
- Overall Height (mm): 368
- Overall Width (cm): 23.5
- Overall Width (in): 9.25
- Overall Width (mm): 235
- Power Connection Type: CPC
- Power Type: Electric
$1,730.00
G3 STANDARD PUMP, G-ACNC-2L0A00-LD000000
GG 96G007
GG 96G007
G3 STANDARD PUMP, G-ACNC-2L0A00-LD000000
G3® Standard Grease Lubrication Pump, 90-240 VAC, 2 Liter, External Low Level, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solution Capable of sending a low level signal to your external controller or PLC
$1,560.00
G3 PRO PUMP, G-ACPR-4LFL00-0D000000
GG 96G082
GG 96G082
G3 PRO PUMP, G-ACPR-4LFL00-0D000000
Graco 96G082 G3™ Pro Grease Lubrication Pump, 90-240 VAC, 4 Liter, Follower Plate, Low Level with Controller, DIN
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- Built-in controller with selectable pump on/pump off timer
- Low level indicator provides low warning and shut-down alarm
- Manual run initiates lube cycle on-demand (remote option also available)
- Pre-lube function can initiate lube cycle on start-up
- Model: G3
- Series: Pro
- Alarm Relay Inductive Maximum Operating Current (A): 1.5
- Alarm Relay Inductive Maximum Operating Voltage (VAC): 250
- Alarm Relay Inductive Maximum Switching Capacity: 25 VA, 30 W
- Alarm Relay Inductive Minimum Permissible Load: 10 ?A, 10m VDC
- Alarm Relay Inductive Rated Load (A): 0.2
- Alarm Relay Resistive Maximum Operating Current (A): 3
- Alarm Relay Resistive Maximum Operating Voltage (VAC): 250
- Alarm Relay Resistive Maximum Switching Capacity: 50 VA, 60 W
- Alarm Relay Resistive Minimum Permissible Load: 10 µA, 10m VDC
- Alarm Relay Resistive Rated Load (A): 0.4
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive
- Control Options: Pro
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- For Use With: Injector-Based Systems, Series Progressive Systems
- Input Cycle Rate (Hz): 8
- Input Impedance: 1.1
- Input Load Current (mA @ 24 VDC): 22
- Input Maximum Off Current (mA): 1.5
- Input Maximum Residual Voltage (V): 4
- Input Required Switch Type: Normally Open
- Input Response Time (ms): 60
- Input Sensor Voltage (VDC): 24
- IP Rating: IP69K
- Low Level Carry Current (A): 1.2
- Low Level Contact Rating (W): 10
- Low Level Switch Rating (VDC): 200
- Low Level Switching Current (A): 0.5
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V ac): 264
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V ac): 88
- Number of Machine Count Sensor Inputs: 1
- Number of Pressure and Cycle Sensor Inputs: 3
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 25.4
- Overall Depth (in): 10
- Overall Depth (mm): 254
$2,410.00
G3 PRO PUMP, G-ACPR-8L0L00-0D000000
GG 96G076
GG 96G076
G3 PRO PUMP, G-ACPR-8L0L00-0D000000
G3® Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, Low Level with Controller, DINExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up
$2,500.00
ULTRA-LITE 1K VALVE, MANUAL, PNEUMATIC SWITCH
GG 965767
GG 965767
ULTRA-LITE 1K VALVE, MANUAL, PNEUMATIC SWITCH
Graco 965767 1K Ultra–Lite Air Operated, Single Component Dispense Valve with Internal Air Switch
1K Ultra-Lite valves are top-of-the-line, lightweight valves designed for long service.
Application: For dispensing a wide variety of single component sealants and adhesives- Lightweight and compact
- Lubricated packings for longer seal life
- Severe-Duty needle and seat
- Adjustable forward travel to reduce material surge
- Manual and automatic versions available
- Pistol grip version provides pilot on/off signal to control pump
$3,390.00
G3 STANDARD PUMP, A-24NC-4L0A00-L0C00000
GG 96G051
GG 96G051
G3 STANDARD PUMP, A-24NC-4L0A00-L0C00000
G3® Standard Oil Lubrication Pump, 24 VDC, 4 Liter, External Low Level, CPCExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solution Capable of sending a low level signal to your external controller or PLC
$1,750.00
G3 STANDARD PUMP, G-ACNC-160A00-LD000000
GG 96G058
GG 96G058
G3 STANDARD PUMP, G-ACNC-160A00-LD000000
Graco 96G058 G3™ Standard Grease Lubrication Pump, 90-240 VAC, 16 Liter, External Low Level, DIN
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- No internal controller–use with separate or existing machine control for a low cost solution
- Capable of sending a low level signal to your external controller or PLC
- Model: G3
- Series: Standard
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Control Options: Standard
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- Includes: Wiper Arm, External Low Level
- IP Rating: IP69K
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V ac): 264
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V ac): 88
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 25.4
- Overall Depth (in): 10
- Overall Depth (mm): 254
- Overall Height (cm): 69.9
- Overall Height (in): 27.5
- Overall Height (mm): 699
- Overall Width (cm): 23.5
- Overall Width (in): 9.25
- Overall Width (mm): 235
- Power Connection Type: DIN
- Power Type: Electric
$2,790.00
G3 PRO PUMP, G-ACPR-2L0L00-0D000000
GG 96G013
GG 96G013
G3 PRO PUMP, G-ACPR-2L0L00-0D000000
Graco 96G013 G3™ Pro Grease Lubrication Pump, 90-240 VAC, 2 Liter, Low Level with Controller, DIN
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- Built-in controller with selectable pump on/pump off timer
- Low level indicator provides low warning and shut-down alarm
- Manual run initiates lube cycle on-demand (remote option also available)
- Pre-lube function can initiate lube cycle on start-up
- Model: G3
- Series: Pro
- Alarm Relay Inductive Maximum Operating Current (A): 1.5
- Alarm Relay Inductive Maximum Operating Voltage (VAC): 250
- Alarm Relay Inductive Maximum Switching Capacity: 25 VA, 30 W
- Alarm Relay Inductive Minimum Permissible Load: 10 ?A, 10m VDC
- Alarm Relay Inductive Rated Load (A): 0.2
- Alarm Relay Resistive Maximum Operating Current (A): 3
- Alarm Relay Resistive Maximum Operating Voltage (VAC): 250
- Alarm Relay Resistive Maximum Switching Capacity: 50 VA, 60 W
- Alarm Relay Resistive Minimum Permissible Load: 10 µA, 10m VDC
- Alarm Relay Resistive Rated Load (A): 0.4
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive
- Control Options: Pro
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- For Use With: Injector-Based Systems, Series Progressive Systems
- Includes: Wiper Arm, Low Level
- Input Cycle Rate (Hz): 8
- Input Impedance: 1.1
- Input Load Current (mA @ 24 VDC): 22
- Input Maximum Off Current (mA): 1.5
- Input Maximum Residual Voltage (V): 4
- Input Required Switch Type: Normally Open
- Input Response Time (ms): 60
- Input Sensor Voltage (VDC): 24
- IP Rating: IP69K
- Low Level Carry Current (A): 1.2
- Low Level Contact Rating (W): 10
- Low Level Switch Rating (VDC): 200
- Low Level Switching Current (A): 0.5
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V ac): 264
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V ac): 88
- Number of Machine Count Sensor Inputs: 1
- Number of Pressure and Cycle Sensor Inputs: 3
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 22.9
- Overall Depth (in): 9 <
$2,090.00
G3 PRO PUMP, G-ACPR-2LFL00-0D000000
GG 96G014
GG 96G014
G3 PRO PUMP, G-ACPR-2LFL00-0D000000
Graco 96G014 G3™ Pro Grease Lubrication Pump, 90-240 VAC, 2 Liter, Follower Plate, DIN
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- Built-in controller with selectable pump on/pump off timer
- Low level indicator provides low warning and shut-down alarm
- Manual run initiates lube cycle on-demand (remote option also available)
- Pre-lube function can initiate lube cycle on start-up
- Model: G3
- Series: Pro
- Alarm Relay Inductive Maximum Operating Current (A): 1.5
- Alarm Relay Inductive Maximum Operating Voltage (VAC): 250
- Alarm Relay Inductive Maximum Switching Capacity: 25 VA, 30 W
- Alarm Relay Inductive Minimum Permissible Load: 10 ?A, 10m VDC
- Alarm Relay Inductive Rated Load (A): 0.2
- Alarm Relay Resistive Maximum Operating Current (A): 3
- Alarm Relay Resistive Maximum Operating Voltage (VAC): 250
- Alarm Relay Resistive Maximum Switching Capacity: 50 VA, 60 W
- Alarm Relay Resistive Minimum Permissible Load: 10 µA, 10m VDC
- Alarm Relay Resistive Rated Load (A): 0.4
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive
- Control Options: Pro
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- For Use With: Injector-Based Systems, Series Progressive Systems
- Includes: Follower Plate, Low Level
- Input Cycle Rate (Hz): 8
- Input Impedance: 1.1
- Input Load Current (mA @ 24 VDC): 22
- Input Maximum Off Current (mA): 1.5
- Input Maximum Residual Voltage (V): 4
- Input Required Switch Type: Normally Open
- Input Response Time (ms): 60
- Input Sensor Voltage (VDC): 24
- IP Rating: IP69K
- Low Level Carry Current (A): 1.2
- Low Level Contact Rating (W): 10
- Low Level Switch Rating (VDC): 200
- Low Level Switching Current (A): 0.5
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V ac): 264
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V ac): 88
- Number of Machine Count Sensor Inputs: 1
- Number of Pressure and Cycle Sensor Inputs: 3
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 22.9
- Overall Depth (in): 9
- Ove
$2,120.00
G3 STANDARD PUMP, G-ACNC-2LFA00-LD000000
GG 96G008
GG 96G008
G3 STANDARD PUMP, G-ACNC-2LFA00-LD000000
Graco 96G008 G3™ Standard Grease Lubrication Pump, 90-240 VAC, 2 Liter, Follower Plate, External Low Level, DIN
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
- No internal controller–use with separate or existing machine control for a low cost solution
- Capable of sending a low level signal to your external controller or PLC
- Model: G3
- Series: Standard
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Series Progressive, Single Line Parallel
- Control Options: Standard
- Fluid Outlet Size (in): 0.25
- Fluid Outlet Size (mm): 6.3500
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPSF
- For Use With: Injector-Based Systems, Series Progressive Systems
- Includes: Follower Plate, External Low Level
- IP Rating: IP69K
- Maximum Fill Inlet Pressure (bar): 344.7
- Maximum Fill Inlet Pressure (kPa): 34470
- Maximum Fill Inlet Pressure (psi): 5000
- Maximum NLGI Grade: #2
- Maximum Run Time (min): 30
- Maximum Voltage (V ac): 264
- Maximum Working Pressure (bar): 351.6
- Maximum Working Pressure (kPa): 35160
- Maximum Working Pressure (MPa): 35.1
- Maximum Working Pressure (psi): 5100
- Minimum Voltage (V ac): 88
- Number of Pump Elements: Up to 3
- Overall Depth (cm): 22.9
- Overall Depth (in): 9
- Overall Depth (mm): 229
- Overall Height (cm): 33.7
- Overall Height (in): 13.25
- Overall Height (mm): 337
- Overall Width (cm): 20.3
- Overall Width (in): 8
- Overall Width (mm): 203
- Power Connection Type: DIN
- Power Type: Electric
$1,625.00
PUMP, G3-G-ACM2-8L0L00-RMCD0A0VP
GG 96G554
GG 96G554
PUMP, G3-G-ACM2-8L0L00-RMCD0A0VP
G3® Max Full-Featured Grease Lubrication Pump, 90-240 VAC, 8 liter reservoir with low level paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch Extend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application. LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance. Low level indicator provides low alert and shut-down alarm Manual run initiates lubrication on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-upOne pump works with either a cycle switch or pressure sensor for custom installations and feedback. Cycle input is compatible with PNP, NPN, and dry contact switches; Pressure input is compatible with analog transducers/sensors and normally open switches.
Machine count input - ideally suited for inconsistently used equipment DIN alarm relay connection can connect to a stack light to indicate pump status from a distance. Compatible with Normally Open Vent Valves - simplifies pump programming, with the added benefit of venting whenever the pump is not running.
$2,850.00
G3 MAX PUMP, G-24M2-160L00-NMCO000VP
GG 96G560
GG 96G560
G3 MAX PUMP, G-24M2-160L00-NMCO000VP
G3® Max Full-Featured Grease Lubrication Pump, 24 VDC, 16 liter reservoir with low level paddle, CPC-7 I/O connector for power, remote button, and alarms for telematics, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch Extend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application. LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance. Low level indicator provides low alert and shut-down alarm Manual run initiates lubrication on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-upOne pump works with either a cycle switch or pressure sensor for custom installations and feedback. Cycle input is compatible with PNP, NPN, and dry contact switches; Pressure input is compatible with analog transducers/sensors and normally open switches.
Machine count input - ideally suited for inconsistently used equipment The new CPC-7 untilizes the same Circular Plastic Connector (CPC) as other G3 pump, now with all seven pins populated with input and output functions.:◦ Connections for tri-color remote manual run and LED push-button in CPC, (similar to CPC-5 on the EGJ and G-Mini Controller pumps)◦ Two alarm output signal wires: one for low level and one for system alarmAccess to I/O features are dependent on selection of external wiring harness (power cord) Compatible with Normally Open Vent Valves - simplifies pump programming, with the added benefit of venting whenever the pump is not running.
$3,200.00
G3 MAX PUMP, G-24M2-8L0L00-NMCO000VP
GG 96G552
GG 96G552
G3 MAX PUMP, G-24M2-8L0L00-NMCO000VP
G3® Max Full-Featured Grease Lubrication Pump, 24 VDC, 8 liter reservoir with low level paddle, CPC-7 I/O connector for power, remote button, and alarms for telematics, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch Extend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application. LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance. Low level indicator provides low alert and shut-down alarm Manual run initiates lubrication on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-upOne pump works with either a cycle switch or pressure sensor for custom installations and feedback. Cycle input is compatible with PNP, NPN, and dry contact switches; Pressure input is compatible with analog transducers/sensors and normally open switches.
Machine count input - ideally suited for inconsistently used equipment The new CPC-7 untilizes the same Circular Plastic Connector (CPC) as other G3 pump, now with all seven pins populated with input and output functions.:◦ Connections for tri-color remote manual run and LED push-button in CPC, (similar to CPC-5 on the EGJ and G-Mini Controller pumps)◦ Two alarm output signal wires: one for low level and one for system alarmAccess to I/O features are dependent on selection of external wiring harness (power cord) Compatible with Normally Open Vent Valves - simplifies pump programming, with the added benefit of venting whenever the pump is not running.
$2,550.00
PUMP, G3-G-ACM2-160L00-RMCD0A0VP
GG 96G562
GG 96G562
PUMP, G3-G-ACM2-160L00-RMCD0A0VP
G3® Max Full-Featured Grease Lubrication Pump, 90-240 VAC, 16 liter reservoir with low level paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch Extend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application. LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance. Low level indicator provides low alert and shut-down alarm Manual run initiates lubrication on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-upOne pump works with either a cycle switch or pressure sensor for custom installations and feedback. Cycle input is compatible with PNP, NPN, and dry contact switches; Pressure input is compatible with analog transducers/sensors and normally open switches.
Machine count input - ideally suited for inconsistently used equipment DIN alarm relay connection can connect to a stack light to indicate pump status from a distance. Compatible with Normally Open Vent Valves - simplifies pump programming, with the added benefit of venting whenever the pump is not running.
$3,500.00
G3 PRO PUMP, G-24PR-8L0000-00C00000
GG 96G138
GG 96G138
G3 PRO PUMP, G-24PR-8L0000-00C00000
G3® Pro Grease Lubrication Pump, 24 VDC, 8 Liter, CPCExtend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up
$1,875.00
SPRING, COMP, .120 OD X .3125 L, 7.41L
GG 97/0203/98
GG 97/0203/98
SPRING, COMP, .120 OD X .3125 L, 7.41L
$43.50
Screw, Shdc, Ss, .500-13X1.750
GG 9955-56C
GG 9955-56C
Screw, Shdc, Ss, .500-13X1.750
Call for pricing
1052-10A-2RS1-125-V, DISPENSE VALVE
GG A2A03073
GG A2A03073
1052-10A-2RS1-125-V, DISPENSE VALVE
Graco A2A03073 1052 Dispensit Valve with 1 inch stroke, 0.125 diameter rod, nitrided tool steel wetted components
The 1052 is a pneumatically-controlled valve with micrometer adjustable dispense volumes for accurate, repeatable, shot-to-shot dispensing.
Application: 1052 positive displacement metering rod valve for low to high viscosity materials.- For low to high viscosity materials with various wetted component configurations for abrasive filled, or corrosive materials.
- Pneumatic and electronic controls that can be integrated for automated applications.
- Model: Dispensit
- Series: 1052
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Metering
- Component Type: Single Component
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kg/cm²): 141
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 14
- Maximum Working Pressure (psi): 2000
- Meter Type: Positive Displacement
$9,090.00
Spool, A2011052, SPL, T TYP, SS/PT
GG A2010021
GG A2010021
Spool, A2011052, SPL, T TYP, SS/PT
$1,550.00
DISPENSIT VALVE, 1206-S1-062-V, LL, SS, FING
GG A2A08051
GG A2A08051
DISPENSIT VALVE, 1206-S1-062-V, LL, SS, FING
Graco A2A08051 1206 Dispensit Valve with 0.062 diameter rod and nitrided tool steel wetted components
Application: Patented meter and dispense system for precise one-component micro-dispensing.
- For low to high viscosity materials with various wetted component configurations for abrasive filled, or corrosive materials.
- Pneumatically-controlled valve with micrometer adjustable dispense volumes for accurate, repeatable shot dispensing.
- Accurate and resetable shot size selection.
- Pneumatic and electronic controls that can be integrated for automated applications.
- Model: Dispensit
- Series: 1206
- Application: Bonding, Sealing
- Component Type: Single Component
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kg/cm²): 141
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 14
- Maximum Working Pressure (psi): 2000
- Meter Type: Positive Displacement
$4,130.00
Adapter, Swv, 1/8Npsx1/16Npt, Fxm, Ms
GG A9000011
GG A9000011
Adapter, Swv, 1/8Npsx1/16Npt, Fxm, Ms
$175.00
Tip, A/A, .011
GG AAF610
GG AAF610
TIP, G15, G40
Graco AAF610 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
$194.50
Tip, A/A, .013
GG AAF412
GG AAF412
TIP, G15, G40
Graco AAF412 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
$190.50
710 REMOTE, NO NEEDLE, NO SOLENOID
GG A9A01019
GG A9A01019
710 REMOTE, NO NEEDLE, NO SOLENOID
710 Dispensit ValveThe Model 710 Dispense Valve is an On/Off valve designed for a continuous flow of viscous material through a dispense needle in automatic, semi-automatic or manual applications.
Designed to accurately dispense beads of single-component materials such as silicones and epoxies for sealing, bonding and gasketing applications.
Features and Benefits:
- Dispenses a range of material viscosities and flow rates
- Offers continuous bead dispensing or rapid on/off cycling without reload time
- High-feed pressure-rated needle valve design provides higher flow rates even for narrow bead profiles
- Simple on/off control via PLC for integrated solenoid versions or versions for external pneumatic control
$4,120.00
Tip
GG AAM409
GG AAM409
TIP, AAM409
Graco AAM409 Fine Finish Spray Tip for G15 and G40 Guns, 0.009 inch (0.229 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$159.50
Tip, AA, .011
GG AAM311
GG AAM311
TIP, AAM311
Graco AAM311 Fine Finish Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 6-8 inches (150-200 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
1052-10A-2Tt1-125-V, Dispense Valve
GG A2A03076
GG A2A03076
1052-10A-2Tt1-125-V, Dispense Valve
$9,040.00
Dispense Tube, 5542-Hu.037, 10Pack
GG A1020157-10
GG A1020157-10
DISPENSE TUBE,5542-HU.037,10PACK
Graco A1020157-10 10 Pack of Dispense Tubes
$110.00
Tip
GG AAM413
GG AAM413
TIP, G15, G40
Graco AAM413 Fine Finish Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
$161.50
Cap, 1052, End, Mag Piston, Clr, A
GG A2010097
GG A2010097
Cap, 1052, End, Mag Piston, Clr, A
$625.00
Screw, SHDC, SS, .250-20X1.000
GG 9944-32C
GG 9944-32C
Screw, SHDC, SS, .250-20X1.000
Call for pricing
Tip, Spray
GG AAM309
GG AAM309
TIP, AAM309
Graco AAM309 Fine Finish Spray Tip for G15 and G40 Guns, 0.009 inch (0.229 mm) Orifice Size, 6-8 inches (150-200 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
Tip, A/A, .013
GG AAF512
GG AAF512
TIP, G15, G40
Graco AAF512 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
$190.50
Tip, A/A, .011
GG AAF510
GG AAF510
TIP, G15, G40
Graco AAF510 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
$194.50
Tip
GG AAM411
GG AAM411
TIP, AAM411
Graco AAM411 Fine Finish Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
MONGOOSE PUMP, LCI-1A17-KPA-0
GG A21008
GG A21008
MONGOOSE PUMP, LCI-1A17-KPA-0
Mongoose™ PVDF Metering Pump, 120 VAC, 17 GDP, 250 PSIGraco Mongoose™ chemical metering pumps are suitable for dispensing chemicals for a variety of diverse markets such as oil and natural gas, mining, agriculture, landscaping and lawn maintenance, waste water, and car wash. These pumps can also be used in chemical dosing maintenance applications including cooling towers, boilers, and plating, as well as a multitude of other uses.
Overload Protection
- Self resetting thermal overload prevents over heating
- Over current protection
- Easily replaceable fuse for overcurrent
- No longer a throwaway pump
Prime/Air Bleed Port
- No need to remove fluid section to prime pump
- Quick and easy priming
Other Features
- Manual stroke adjustment
- Splash cover over controls
- NEMA 4x style enclosure
- UL and CSA certified
- Ball/seat check valves
Standards
- CE and ATEX approved
$853.00
Tip, A/A, .015
GG AAF614
GG AAF614
TIP, G15, G40
Graco AAF614 AAF Fine Finish Pre-Orifice Spray Tips for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
$194.50
Tip
GG AAM511
GG AAM511
TIP, AAM511
Graco AAM511 Fine Finish Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
Tip
GG AAM513
GG AAM513
TIP, G15, G40
Graco AAM513 Fine Finish Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
Tip
GG AAM515
GG AAM515
TIP, AAM515
Graco AAM515 Fine Finish Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50