GRACO INC. S10595

GG H52525

GG H42506

GG GGW519

GG GG4517

TIP, SPRAY

Graco GG4517 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

GG GG4613

GG GG4611

GG GG4615

TIP, SPRAY

Graco GG4615 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width

GG HK-2001

GG LTX527

RAC X LTX TIP, SPRAY, 527

Graco LTX527 RAC X SwitchTip, 527

The Reverse-A-Clean (RAC) 527 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.77
• Maximum Flow Rate (L/min): 2.91

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.027

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG LTX523

RAC X LTX TIP, SPRAY, 523

Graco LTX523 RAC X SwitchTip, 523

The Reverse-A-Clean (RAC) 523 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.023

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG LTX619

RAC X LTX TIP, SPRAY, 619

Graco LTX619 RAC X SwitchTip, 619

The Reverse-A-Clean (RAC) 619 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.019

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX623

RAC X LTX TIP, SPRAY, 623

Graco LTX623 RAC X SwitchTip, 623

The Reverse-A-Clean (RAC) 623 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.023

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX611

RAC X LTX TIP, SPRAY, LATEX, (611)

Graco LTX611 RAC X SwitchTip, 611

The Reverse-A-Clean (RAC) 611 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.12
• Maximum Flow Rate (L/min): 0.45

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.011

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX613

RAC X LTX TIP, SPRAY, LATEX, (613)

Graco LTX613 RAC X SwitchTip, 613

The Reverse-A-Clean (RAC) 613 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.013

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG SDM33B

SDX SERIES 10 REEL, HOSE

Graco SDM33B SDX 10, Oil, 1/2 in (13 mm) Inlet, 1/2 in X 35 ft (13 mm X 11 m) Hose, NPT, Overhead Mount, Metallic Blue

Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors

• Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
• Increased Spring Power - Every SDX oil hose reel recoils to the exact same assigned length for a clean, uniform look.
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (10.7-19.8 meters) hose (NPT air/water) capacity for a wide variety of applications
• Durable Finish - Baked-on enamel finish protects reel from corrosion

• Model: SDX
• Series: 10

• Application: Oil

• Color: Metallic Blue

• Frame Type: Single Pedestal

• Hose Inside Diameter (in): 1/2
• Hose Inside Diameter (mm): 12.7
• Hose Length (ft): 35
• Hose Length (m): 11

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 2000

• Minimum Temperature ( degree C): -28
• Minimum Temperature ( degree F): -20

• Mount Location: Overhead Mount

• Outlet Size (in): 1/2
• Outlet Size (mm): 12.7
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 19.5
• Overall Height (mm): 498
• Overall Length (in): 17.1
• Overall Length (mm): 435
• Overall Width (in): 7
• Overall Width (mm): 177

• Recommended Environment: Indoor, Limited Outdoor
• Recommended Fluid Type: Oil

GG SDM65B

SDX SERIES 20 REEL, HOSE

Graco SDM65B SDX 20, Oil, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Overhead Mount, Metallic Blue

Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors

• Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
• Increased Spring Power - Every SDX oil hose reel recoils to the exact same assigned length for a clean, uniform look.
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (10.7-19.8 meters) hose (NPT air/water) capacity for a wide variety of applications
• Durable Finish - Baked-on enamel finish protects reel from corrosion

• Model: SDX
• Series: 20

• Application: Oil

• Color: Metallic Blue

• Frame Type: Single Pedestal

• Hose Inside Diameter (in): 1/2
• Hose Inside Diameter (mm): 12.7
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 2000

• Minimum Temperature ( degree C): -28
• Minimum Temperature ( degree F): -20

• Mount Location: Overhead Mount

• Outlet Size (in): 1/2
• Outlet Size (mm): 12.7
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 21.8
• Overall Height (mm): 554
• Overall Length (in): 19.2
• Overall Length (mm): 487
• Overall Width (in): 7
• Overall Width (mm): 177

• Recommended Environment: Indoor, Limited Outdoor
• Recommended Fluid Type: Oil

GG P23LSA

DURA-FLO PUMP, 6500/580

Graco P23LSA Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, SST, 3 UHMW / 2 PTFE Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Stainless Steel Pump, Low Noise Exhaust Motor, 3 UHMWPE/2 PTFE Packings

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 9.2
• Maximum Flow Rate (L/min): 34.83

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 164
• Maximum Working Pressure (kPa): 16400
• Maximum Working Pressure (MPa): 16.4
• Maximum Working Pressure (psi): 2380

• Motor Type: Low Noise NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 23:1

GG P30LSS

DURA-FLO PUMP, 3400/220

Graco P30LSS 30:1 - 220cc Dura-Flo Pump with NXT 3400 Air Motor, Severe Duty Stainless Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• NXT 3400 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 220cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • Optional DataTrak Control

    Runaway protection

    Pump diagnostics

    Material usage

    
    

    • Model: Dura-Flo
    • Ambient/Warm Melt/Hot Melt: Ambient
    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
    • Compatible Material: CARC, High Solids, Metallics, Solvent borne, Stains, Varnish, Xirallic
    • Fluid Inlet Size (in): 2
    • Fluid Inlet Size (mm): 50.8000
    • Fluid Inlet Thread Gender: Female
    • Fluid Inlet Thread Type: NPT
    • Fluid Outlet Size (in): 1
    • Fluid Outlet Size (mm): 25.4000
    • Fluid Outlet Thread Gender: Female
    • Fluid Outlet Thread Type: NPT
    • Includes: Motor, Lower, Rod Tie, Collar Coupling, Adaptor, Nut Coupling, Nut Hex, Wrench
    • Material: Stainless Steel
    • Maximum Working Pressure (bar): 219
    • Maximum Working Pressure (kPa): 21900
    • Maximum Working Pressure (MPa): 21.9
    • Maximum Working Pressure (psi): 3170
    • Power Type: Pneumatic
    • Pump Ratio: 30:1

GG SDL2DB

SDX SERIES 10 REEL, HOSE

Graco SDL2DB SDX 10, Air/Water/Antifreeze/WWS, 3/8 in (10 mm) Inlet, Bare Reel (3/8 in X 50 ft (10 mm X 15 m) Capacity), NPT, Overhead Mount, Metallic Blue

Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors

• Includes a stainless-steel swivel shaft for extended service life when transporting air, water, antifreeze, windshield wash solvent and other fluids.
• Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (10.7-19.8 meters) hose (NPT air/water) capacity for a wide variety of applications
• Durable Finish - Baked-on enamel finish protects reel from corrosion

• Model: SDX
• Series: 10

• Application: Air, Water

• Bare Reel: 1

• Color: Metallic Blue

• Frame Type: Single Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Bare Reel
• Includes Hose: No
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Female
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 300

• Minimum Temperature ( degree C): -28
• Minimum Temperature ( degree F): -20

• Mount Location: Overhead Mount

• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 19.5
• Overall Height (mm): 498
• Overall Length (in): 17.1
• Overall Length (mm): 435
• Overall Width (in): 7
• Overall Width (mm): 177

• Recommended Environment: Indoor, Limited Outdoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG SDL65F

SDX SERIES 20 REEL, HOSE

Graco SDL65F SDX 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, Overhead Mount, Yellow

Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors

• Includes a stainless-steel swivel shaft for extended service life when transporting air, water, antifreeze, windshield wash solvent and other fluids.
• Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (10.7-19.8 meters) hose (NPT air/water) capacity for a wide variety of applications
• Durable Finish - Baked-on enamel finish protects reel from corrosion

• Model: SDX
• Series: 20

• Application: Air, Water, Antifreeze, WWS

• Color: Yellow

• Frame Type: Single Pedestal

• Hose Inside Diameter (in): 1/2
• Hose Inside Diameter (mm): 12.7
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 300

• Minimum Temperature ( degree C): -28
• Minimum Temperature ( degree F): -20

• Mount Location: Overhead Mount

• Outlet Size (in): 1/2
• Outlet Size (mm): 12.7
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 21.8
• Overall Height (mm): 554
• Overall Length (in): 19.2
• Overall Length (mm): 487
• Overall Width (in): 7
• Overall Width (mm): 177

• Recommended Environment: Indoor, Limited Outdoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG SDU.A02AAA2AA0C21

SANIFORCE DRUM UNLOADER SYSTEM, RAM, HYGIENIC

Graco SDU.A02AAA2AA0C21 SaniForce Ram Unit, SST Frame, 5:1 PP, Inflatable Seal, Enclosed Pneumatic Controls

SaniForce Drum Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 2,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The inflatable seal system it is flexible enough to accomodate multiple drum shapes and sizes. With multiple pump, control, plate, and frame options the systems are configurable to match requirements of most users applications.

• Reduce material waste with up to 99% material evacuation
• Improve worker ergonomics by eliminating hazards associated with scooping and dumping options
• Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates
• Electronic controls for system automation of container evacuation and precise batch control with use of scale or flow meter
• Configurable systems to meet requirements of almost any ingredient unloading application

• Model: SaniForce 2.0 Drum Unloader
• Series: A

• Ambient/Warm Melt/Hot Melt: 90
• Application: Food, Personal Care

• Compatible Drum Height (cm): 101.6
• Compatible Drum Height (in): 40
• Compatible Drum Height (mm): 1016
• Compatible Drum Inside Diameter (cm): 54.6-59.0
• Compatible Drum Inside Diameter (in): 21.5-23.25
• Compatible Drum Inside Diameter (mm): 546-590

• Container Type: Drum
• Control Panel Material: Stainless Steel
• Control Panel Type: Enclosed

• Finish/Coating: Bead Blast

• Frame Material: Stainless Steel

• Material Container Volume (gal): 55
• Material Container Volume (l): 208

• Maximum Air Inlet Pressure (bar): 6.89
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 13
• Maximum Flow Rate (L/min): 49.2

• Maximum Fluid Pressure (bar): 28.7
• Maximum Fluid Pressure (kPa): 2870
• Maximum Fluid Pressure (psi): 410

• Maximum Fluid Pressure (bar): 28.7
• Maximum Fluid Pressure (kPa): 2870
• Maximum Fluid Pressure (psi): 410

• Maximum Height (cm): 295
• Maximum Height (ft): 9.7
• Maximum Height (in): 116
• Maximum Height (m): 2.95
• Maximum Height (mm): 2946

• Maximum Operating Temperature ( degree C): 32
• Maximum Operating Temperature ( degree F): 90

• Maximum Working Pressure (bar): 28.7
• Maximum Working Pressure (kPa): 2870
• Maximum Working Pressure (MPa): 2.9
• Maximum Working Pressure (psi): 410

• Minimum Height (cm): 194
• Minimum Height (ft): 6.4
• Minimum Height (in): 76.2
• Minimum Height (m): 1.94
• Minimum Height (mm): 1935

• Overall Depth

GG SN712-1AK

GG SDH55B

SDX SERIES 20 REEL, HOSE

Graco SDH55B SDX 20, Grease, 3/8 in (10 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT, Overhead Mount, Metallic Blue

Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors

• Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Adjustable Arm - Easily change the arm position for your application
• Durable Finish - Baked-on enamel finish protects reel from corrosion

• Model: SDX
• Series: 20

• Application: Grease

• Color: Metallic Blue

• Dry Weight (lb): 52

• Frame Type: Single Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 93
• Maximum Temperature ( degree F): 200

• Maximum Working Pressure (psi): 4800

• Minimum Temperature ( degree C): -40
• Minimum Temperature ( degree F): -40

• Mount Location: Overhead Mount

• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 21.8
• Overall Height (mm): 554
• Overall Length (in): 19.2
• Overall Length (mm): 487
• Overall Width (in): 7
• Overall Width (mm): 177

• Recommended Environment: Indoor, Limited Outdoor
• Recommended Fluid Type: Grease

GG SA920K

GG SA920008

GG SM334004

GG SM362003

GG SM321001

GG SM334003

GG P20LCS

CHECK-MATE PUMP, 20:1 700/060 LW NS CS SD

Graco P20LCS 20:1 - 60cc Check-Mate Pump with NXT 700 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• NXT 700 Air Motor
  

  Low Noise

  Modular design for easier maintenance

  Highest technology air motor on the market

• 60cc Check-Mate Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Xtreme Coupler - No tool connection

  Quick-disconnect coupler for easy maintenance

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • NEW Xtreme Coupler

    Quick-disconnect coupler for easy maintenance

    • Replaceable Outlet Fitting

      Reduces repair costs

      • Piston Valve with Floating Piston Seal

        For maximum pressure balance over a range of material viscosities

        • Replaceable Seat

          Minimizes service costs

          • Floating Priming Plate

            Provides uniform flow

            • Cast Outlet and Inlet Housing

              Improves structural integrity

              • NEW Cartridge Throat Packings

                Allows for easy servicing without removing from ram

                • Modular Air Valve

                  De-icing controls

                  Up to 50% quieter than previous models

                  Modular air valve - eliminates stalling, easy-to-repair

                  • Hard Part Coatings

                    Standard Severe Duty coating on rods and cylinder maximizes wear life

                    
                    

                    • Model: Check-Mate
                    • Ambient/Warm Melt/Hot Melt: Ambient
                    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                    • Fluid Outlet Size (in): 3/4
                    • Fluid Outlet Thread Gender: Male
                    • Fluid Outlet Thread Type: NPT
                    • Includes: Motor, Displacement Pump, Washer Lock (6), Screw
                    • Material: Carbon Steel
                    • Maximum Working Pressure (bar): 138
                    • Maximum Working Pressure (kPa): 13800
                    • Maximum Working Pressure (MPa): 13.8
                    • Maximum Working Pressure (psi): 2000
                    • Power Type: Pneumatic
                    • Pump Ratio: 20:1

GG P14LSM

GG P30DSE

DURA-FLO PUMP, 3400/220

Graco P30DSE Dura-Flo NXT 2-Ball Piston Pump, 30:1, De-Icing Exhaust Motor, SST, 4 Leather / 1 PTFE Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Air Inlet Size (in): 0.7506
• Air Inlet Size (mm): 19.05

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 4 Leather/1 PTFE Packings

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 3.4
• Maximum Flow Rate (L/min): 12.87

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 105
• Maximum Working Pressure (kPa): 10500
• Maximum Working Pressure (MPa): 10.5
• Maximum Working Pressure (psi): 1520

• Motor Type: De-Icing NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 30:1

GG PC29RD

KIT, PC CHAMBER, RND, 00

Graco PC29RD Fusion ProConnect Round 00 Mix Chamber with 0.029 in (0.74 mm) Orifice Size

The Fusion ProConnect Round 00 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 00 (.029)

GG P15CSS

DURA-FLO PUMP, 3400/430

Graco P15CSS 15:1 - 430cc Dura-Flo Pump with NXT 34000 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• Model: Dura-Flo

GG P12LCD

DURA-FLO PUMP, 3400/580

Graco P12LCD Dura-Flo NXT 2-Ball Piston Pump, 12:1, Low Noise Exhaust Motor, CS, 3 PTFE / 2 Leather Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Carbon Steel Pump, Low Noise Exhaust Motor, 3 PTFE/2 Leather Packings

• Material: Carbon Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 9.2
• Maximum Flow Rate (L/min): 34.83

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 82
• Maximum Working Pressure (kPa): 8200
• Maximum Working Pressure (MPa): 8.2
• Maximum Working Pressure (psi): 1190

• Motor Type: Low Noise NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 12:1

GG LTX625

RAC X LTX TIP, SPRAY, 625

Graco LTX625 RAC X SwitchTip, 625

The Reverse-A-Clean (RAC) 625 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.025

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX651

RAC X LTX TIP, SPRAY, (651)

Graco LTX651 RAC X SwitchTip, 651

The Reverse-A-Clean (RAC) 651 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.051 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 2.79
• Maximum Flow Rate (L/min): 10.56

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.051

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX631

RAC X LTX TIP, SPRAY, 631

Graco LTX631 RAC X SwitchTip, 631

The Reverse-A-Clean (RAC) 631 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.031

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG P23DSA

DURA-FLO PUMP, 6500/580

Graco P23DSA Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, SST, 3 UHMW / 2 PTFE Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 3 UHMWPE/2 PTFE Packings

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 9.2
• Maximum Flow Rate (L/min): 34.83

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 168
• Maximum Working Pressure (kPa): 16800
• Maximum Working Pressure (MPa): 16.8
• Maximum Working Pressure (psi): 2430

• Motor Type: Low Noise NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 23:1

GG P2H153

GG P63LCS

CHECK-MATE PUMP, 63:1 3400/100 CS SD

Graco P63LCS 63:1 - 100cc Check-Mate Pump with NXT 3400 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• NXT 3400 Air Motor
  

  Low Noise

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 100cc Check-Mate Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Xtreme Coupler - No tool connection

  Quick-disconnect coupler for easy maintenance

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • NEW Xtreme Coupler

    Quick-disconnect coupler for easy maintenance

    • Replaceable Outlet Fitting

      Reduces repair costs

      • Piston Valve with Floating Piston Seal

        For maximum pressure balance over a range of material viscosities

        • Replaceable Seat

          Minimizes service costs

          • Floating Priming Plate

            Provides uniform flow

            • Cast Outlet and Inlet Housing

              Improves structural integrity

              • NEW Cartridge Throat Packings

                Allows for easy servicing without removing from ram

                • Modular Air Valve

                  De-icing controls

                  Up to 50% quieter than previous models

                  Modular air valve - eliminates stalling, easy-to-repair

                  • Hard Part Coatings

                    Standard Severe Duty coating on rods and cylinder maximizes wear life

                    
                    

                    • Model: Check-Mate
                    • Ambient/Warm Melt/Hot Melt: Ambient
                    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                    • Fluid Outlet Size (in): 3/4
                    • Fluid Outlet Thread Gender: Male
                    • Fluid Outlet Thread Type: NPT
                    • Includes: Motor, Displacement Pump
                    • Material: Carbon Steel
                    • Maximum Working Pressure (bar): 441
                    • Maximum Working Pressure (kPa): 44100
                    • Maximum Working Pressure (MPa): 44.1
                    • Maximum Working Pressure (psi): 6300
                    • Power Type: Pneumatic
                    • Pump Ratio: 63:1

GG P12DSA

DURA-FLO PUMP, 3400/580

Graco P12DSA Dura-Flo NXT 2-Ball Piston Pump, 12:1, De-Icing Exhaust Motor, SST, 3 UHMW / 2 PTFE Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 3 UHMWPE/2 PTFE Packings

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 9.2
• Maximum Flow Rate (L/min): 34.83

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 82
• Maximum Working Pressure (kPa): 8200
• Maximum Working Pressure (MPa): 8.2
• Maximum Working Pressure (psi): 1190

• Motor Type: De-Icing NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 12:1

GG NXT606

GG NXT300

KIT, REPAIR, SOFT SEAL NXT 3400

GG NXT604

GG P38LCS

CHECK-MATE PUMP, 38:1 1200/060 CS SD

Graco P38LCS 38:1 - 60cc Check-Mate Pump with NXT 1200 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• NXT 1200 Air Motor
  

  Low Noise

  Modular design for easier maintenance

  Highest technology air motor on the market

• 60cc Check-Mate Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  • NEW Xtreme Coupler

    Quick-disconnect coupler for easy maintenance

    • Replaceable Outlet Fitting

      Reduces repair costs

      • Piston Valve with Floating Piston Seal

        For maximum pressure balance over a range of material viscosities

        • Replaceable Seat

          Minimizes service costs

          • Floating Priming Plate

            Provides uniform flow

            • Cast Outlet and Inlet Housing

              Improves structural integrity

              • NEW Cartridge Throat Packings

                Allows for easy servicing without removing from ram

                • Modular Air Valve

                  De-icing controls

                  Up to 50% quieter than previous models

                  Modular air valve - eliminates stalling, easy-to-repair

                  • Hard Part Coatings

                    Standard Severe Duty coating on rods and cylinder maximizes wear life

                    
                    

                    • Model: Check-Mate
                    • Ambient/Warm Melt/Hot Melt: Ambient
                    • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                    • Fluid Outlet Size (in): 3/4
                    • Fluid Outlet Thread Gender: Male
                    • Fluid Outlet Thread Type: NPT
                    • Includes: Motor, Displacement Pump, Washer (6), Screw
                    • Material: Carbon Steel
                    • Maximum Working Pressure (bar): 262
                    • Maximum Working Pressure (kPa): 26200
                    • Maximum Working Pressure (MPa): 26.2
                    • Maximum Working Pressure (psi): 3800
                    • Power Type: Pneumatic
                    • Pump Ratio: 38:1

GG P45LSE

DURA-FLO PUMP, 6500/290

Graco P45LSE Dura-Flo NXT 2-Ball Piston Pump, 45:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE Packings

Graco's Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

• Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
• High pump pressure and flow performance to handle a broad range of paints and coatings
• Improved serviceability with fewer parts, faster repairs and lower ownership cost

• Model: Dura-Flo
• Series: 2-Ball

• Air Inlet Size (in): 0.7506
• Air Inlet Size (mm): 19.05

• Application: Supply

• Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish

• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Type: 2-Ball

• Includes: Stainless Steel Pump, Low Noise Exhaust Motor, 4 Leather/1 PTFE Packings

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.41

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Working Pressure (bar): 164
• Maximum Working Pressure (kPa): 16400
• Maximum Working Pressure (MPa): 16.4
• Maximum Working Pressure (psi): 2380

• Motor Type: Low Noise NXT

• Mount Type: Wall or Stand Mount

• Portable: Non-Portable

• Pump Ratio: 45:1

GG PF2520

PCF SYSTEM, 016, HTD REG/METER, EP

Graco PF2520 16 Styles 100-240 VAC Precision Flow System with Heated Mastic Regulator, Heated Standard Resolution Meter and EtherNet/IP User Interface

Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.

• The next generation of precision metering

  Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste

  Intuitive user interface simplifies setup, reduces training time

  Integrated USB interface for easy data downloads - allows for further analysis of process data

  Multiple gun capabilities for additional productivity - lets you program up to four guns

  Compact modular design - easy to install, integrate and maintain

  Low cost of ownership - fewer wear parts compared to shot meters

  
  

  • Model: PCF
  • Air Inlet Size (in): 1/4
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Air Outlet Size (in): 5/32
  • Ambient/Warm Melt/Hot Melt: Warm-Melt, Hot-Melt
  • Amperage (A): 1.4
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
  • Applicator Type: Automatic
  • Compatible Material: Sealants, Adhesives
  • Component Type: Single Component
  • Flow Control Type: Regulation, Control
  • Fluid Inlet Size (in): 3/4
  • Fluid Inlet Thread Gender: Female
  • Fluid Inlet Thread Type: NPT
  • Fluid Outlet Size (cm): 17281.1023622047
  • Fluid Outlet Size (in): 3/4
  • Fluid Outlet Size (mm): 1728.1102362205
  • Fluid Outlet Thread Gender: Female
  • Fluid Outlet Thread Type: NPT
  • Frequency (Hz): 50/60
  • Gateway: EtherNet/IP User Interface
  • Gun Activation: Automatic
  • Includes: Regulator, FCM Key Token
  • Maximum Air Inlet Pressure (bar): 8.27
  • Maximum Air Inlet Pressure (kPa): 827
  • Maximum Air Inlet Pressure (MPa): 0.83
  • Maximum Air Inlet Pressure (psi): 120
  • Maximum Ambient Temperature ( degree C): 49
  • Maximum Ambient Temperature ( degree F): 120
  • Maximum Flow Rate (cc/min): 22500
  • Maximum Fluid Temperature ( degree C): 204
  • Maximum Fluid Temperature ( degree F): 400
  • Maximum Fluid Viscosity (cP): 1000000
  • Maximum Fluid Temperature ( degree C): 204
  • Maximum Fluid Temperature ( degree F): 400
  • Maximum Fluid Viscosity (cP): 1000000
  • Maximum Fluid Working Pressure (bar): 241
  • Maximum Fluid Working Pressure (MPa): 24
  • Maximum Fluid Working Pressure (psi): 3500
  • Maximum Operating Temperature ( degree C): 204
  • Maximum Operating Temperature ( degree F): 400
  • Maximum Working Pressure (bar): 345
  • Maximum Working Pressure (kPa): 34500
  • Maximum Working Pressure (MPa): 35
  • Maximum Working Pressure

GG R5A141

GG PC60RD

KIT, PC CHAMBER, RND, 03

Graco PC60RD Fusion ProConnect Round 03 Mix Chamber with 0.060 in (1.5 mm) Orifice Size

The Fusion ProConnect Round 03 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 03 (.060)

GG PC70RD

KIT, PC CHAMBER, RND, 04

Graco PC70RD Fusion ProConnect Round 04 Mix Chamber with 0.070 in (1.8 mm) Orifice Size

The Fusion ProConnect Round 04 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 05 (.086)

GG PC52RD

KIT, PC CHAMBER, RND, 02

Graco PC52RD Fusion ProConnect Round 02 Mix Chamber with 0.052 in (1.3 mm) Orifice Size

The Fusion ProConnect Round 02 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 02 (.052)

GG PC37RD

KIT, PC CHAMBER, RND, 00-01

Graco PC37RD Fusion ProConnect Round 00-01 Mix Chamber with 0.037 in (0.94 mm) Orifice Size

The Fusion ProConnect Round 00-01 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 00-01 (.037)

GG PC42FL

KIT, PC CHAMBER, FL, 01

Graco PC42FL Fusion ProConnect Flat 01 Mix Chamber with 0.042 in (1.1 mm) Orifice Size

The Fusion ProConnect Flat 01 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.

• Ultra durable Chromex coating
• Ramp design for quick assembly and proper sealing
• Alignment groove ensures proper assembly

• Model: Fusion PC

• Mix Chamber: 01 (.042)

GG RTM040

GG SA915005

GG RD0000

GG SA906002

GG SA915007

GG SA920002

GG LTX617

RAC X LTX TIP, SPRAY, 617

Graco LTX617 RAC X SwitchTip, 617

The Reverse-A-Clean (RAC) 617 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.017

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX621

RAC X LTX TIP, SPRAY, 621

Graco LTX621 RAC X SwitchTip, 621

The Reverse-A-Clean (RAC) 621 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC X HandTite Tip Guard

• Material: Tungsten Carbide

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.021

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX417

RAC X LTX TIP, SPRAY, 417

Graco LTX417 RAC X SwitchTip, 417

The Reverse-A-Clean (RAC) 417 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC X HandTite Tip Guard

• Material: Tungsten Carbide

• Maximum Fan Width (cm): 20
• Maximum Fan Width (in): 8

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Orifice Diameter (in): 0.017

GG LTX511

RAC X LTX TIP, SPRAY, 511

Graco LTX511 RAC X SwitchTip, 511

The Reverse-A-Clean (RAC) 511 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.12
• Maximum Flow Rate (L/min): 0.45

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.011

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG LTX519

RAC X LTX TIP, SPRAY, 519

Graco LTX519 RAC X SwitchTip, 519

The Reverse-A-Clean (RAC) 519 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market

  Longest lasting fan pattern

  Highest quality finish with a consistent spray pattern

• Easy to Identify Tip Size

  Large raised tip size numbers are always legible - even when covered with paint

• Superior Tip Design

  Locking tab ensures tip stays securely in guard

  Snaps tip in spray or reverse position

  OneSeal tip gasket installs with no tools

  Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC X HandTite Tip Guard

• Material: Tungsten Carbide

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.019

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG LW075A

KIT, LOWER,75CC ASSY

Graco LW075A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 75 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings