Grinders
Right Angle Grinder
DC 12LF280-36
RA SNDR/GRD,RE,12K,1/4" COLLET- Composite housing
- Wide array of speeds; front and rear exhaust models available
- Ergonomic and balanced design minimized operator fatigue
- OH version includes 4ft overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm
Girnder, Vertical PE, NCL, 80K, 1/8in Collet
DC 12R0380-18
GRINDR VERT PENCL,80K,1/8" COL- Industrial bearing provides long life expectancy
- Designed for precision deburring and metal removal
- Compact and light weight composite housing
- Roll throttle equipped
- Includes over-hose
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 0.22 lb
Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose
Pencil Grinder
DC 12R0410-16
GRD,PENCIL,ERGO,60K,3/32" COL- Industrial bearing provides long life expectancy
- Designed for precision deburring and metal removal
- Compact and light weight composite housing
- Roll throttle equipped
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb
Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose
Pencil Grinder
DC 12R0410-18
GRD,PENCIL,ERGO,60K,1/8" COLLET- Industrial bearing provides long life expectancy
- Designed for precision deburring and metal removal
- Compact and light weight composite housing
- Roll throttle equipped
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb
Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose
.4 Hp 3 Inch Ext. Die Grinder
DY 43500
.4 hp 3in (76 mm) Extension Die Grinder25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4 Hp 3in Ext. Die Grinder, 25,000 Rpm, Rear Exh., 1/4 and 6mm Collets
DY 43505
.4 hp 3in (76 mm) Extension Die Grinder25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
6in Ext. Die Grinder, 25K Rpm
DY 43510
.4 hp 6in (152 mm) Extension Die Grinder25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 6in (152 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
6in Extention. Die Grinder, 25, 000 Rpm
DY 43515
.4 hp 6in (152 mm) Extension Die Grinder25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4 hp Right Angle Die Grinder, 12,000 RPM
DY 46000
.4 hp Right Angle Die Grinder12,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 12000.0
- Motor RPM: 12,000
.4 HP Right Angle Die Grinder, 15,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet
DY 46001
.4 HP Right Angle Die Grinder, 15,000rpm, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet
1/4in Die Grinder, 3200 RPM, .4 HP
DY 47201
.4 hp Straight-Line Die Grinder3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 3200.0
- Motor RPM: 3,200
.4 hp Right Angle Die Grinder, 12,000 Rpm, 1/4in and 6mm Collets
DY 47800
.4 hp Right Angle Die Grinder12,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 12000.0
- Motor RPM: 12,000
.4 hp Right Angle Die Grinder
DY 47801
.4 hp Right Angle Die Grinder15,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 15000.0
- Motor RPM: 15,000
.4 hp Straight-Line Die Grinder
DY 48201
.4 hp Straight-Line Die Grinder25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4hp 7 Degree Offset Die Ginder
DY 48205
.4 hp 7 Degree Offset Die Grinder25,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets
One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
R/A .4 HP 12, 000 RPM Grinder
DY 48315
.4 hp Right Angle Die Grinder12,000 RPM, Spiral-Geared, Rear Exhaust, 1/4in Collet
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 12000.0
- Motor RPM: 12,000
.4 Hp Die Grinder, Gearless
DY 48335
.4 hp 7 Degree Offset Die Grinder25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets
One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4 hp 7 Degree Offset De Grinder, 30,000 rpm
DY 48337
.4 hp 7 Degree Offset Die Grinder30,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets
Includes both 1/4in and 6mm collet inserts.
- HP: 0.4
- Max. RPM: 30000.0
- Motor RPM: 30,000
.4 hp Straight-Line Die Grinder
DY 48365
.4 hp Straight-Line Die Grinder20,000 RPM, Gearless, Rear Exhaust, 1/8in and 3 mm Collets, Standard Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 20000.0
- Motor RPM: 20,000
.4 hp Angle-Head Die Grinder, 3200 rpm
DY 49425
.4 hp Right Angle Die Grinder3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in Collet
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 3200.0
- Motor RPM: 3,200
4 In R/A 1 HP 12, 000 RPM Grinder
DY 50302
4in (102 mm) Diameter Right Angle Depressed Center Wheel Grinder1 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread
Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
4in Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
- HP: 1.0
- Max. RPM: 12000.0
- Motor RPM: 12,000
7 In R/A 2 HP 6, 000 RPM Grinder
DY 50348
7in (178 mm) Diameter Right Angle Depressed Center Wheel Grinder2 hp, 6,000 RPM, Side Exhaust, 5/8in -11 Spindle Thread
Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
7in Diameter, Right Angle, 2 hp, Side Exhaust, 6,000 RPM.
- HP: 2.0
- Max. RPM: 6000.0
- Motor RPM: 6000
.5 HP STRAIGHT-LINE DIE GRINDER
DY 51302
.5 hp Straight-Line Die Grinder20,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 0.5
- Max. RPM: 20000.0
- Motor RPM: 20000
.5 HP Straight-Line Die Grinder
DY 51304
.5 hp Straight-Line Die Grinder15,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 0.5
- Max. RPM: 15000.0
- Motor RPM: 15000
.5 HP STRAIGHT-LINE DIE GRINDER
DY 51305
.5 hp Straight-Line Die Grinder18,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 0.5
- Max. RPM: 18000.0
- Motor RPM: 18000
Payment options
