Airpower | Grinders

5In Ext. Grinder

DC 12L1101-36

GRD,ERGO,EXT,5" ,FE,28K,1/4" COL

25,000 - 28,000 RPM 0.3 hp (0.22 kW)

3" | 75mm and 5" | 125mm extended housings available

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Multiple bearings for low vibration and balance

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$705.20

Vertical Sander/Grinder, 1/4in collet

DC 12L1382-36

VERT SNDR/GRD,RE,20K,1/4" E300

20,000 - 30,000 RPM 0.3 hp (0.22 kW)

Composite housing

Wide array of speeds offered; front and rear exhaust models available

Suitable for a wide range of finishing and deburring applications

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$765.40

Grinder Ergo, fe, 25K, 1/4 COL

DC 12L2000-01

GRINDR ERGO, FE, 25K,1/4 COL

12,000 - 25,000 RPM 0.6 hp (0.45 kW)

Ergonomic composite housing

Front and rear exhaust models available

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation Version

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm

$487.62

Grinder Ergo 1/4 Collet 20,000 rpms

DC 12L2001-01

GRINDR ERGO,FE,20K,1/4" COLLET

12,000 - 25,000 RPM 0.6 hp (0.45 kW)

Ergonomic composite housing

Front and rear exhaust models available

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation Version

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm

$520.30

Grinder, Straight, 18000Rpm

DC 12L2002-01

GRINDR ERGO,FE,18K,1/4" COLLET

12,000 - 25,000 RPM 0.6 hp (0.45 kW)

Ergonomic composite housing

Front and rear exhaust models available

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation Version

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm

$610.60

Grinder Ergo FE, 23K, 1/4in Collet

DC 12L2500-36

GRINDR ERGO,FE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$645.00

Inline Grinder 12000 rpm 1/4 Collet

DC 12L2542-01

GRINDR ERGO,RE,12K,GOV,1/4" COL

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$928.80

Grinder, 23000 Rpm

DC 12L2580-01

GRINDR ERGO,RE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$575.34

Rt. Angle Sander/Grinder, RE, 20K, 1/4in Collet

DC 12L2718-36

RA SND/GRD,ERGO,RE,18K,1/4" COL

14,500 RPM 0.9 hp (0.67 kW)

Composite housing

Powerful motor wiith rear exhaust

Robust design perfectly suited for industrial applications

Standard 3" extension

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.98 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2 in / 12.7 mm Standard Equipment: Wheel guard and flange wrench

$1,057.80

Ra Snd/Grd, Fe, 4.5K, Gov

DC 12L2762-80

RA SND/GRD,FE,4.5K,GOV,5/8-11E

850 - 11,000 RPM 0.9 hp (0.67 kW)

Aluminum 10L and Composite 12L housing options

High output motor for demanding sanding applications

Heavy duty low profile head for superior durability

Tool not supplied with backing pad as shown

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 3.97 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches

$1,333.00

Rt. Angle Sander/Grinder, RE, 12K, 1/4in Collet

DC 12L2777-36

Rt. Angle Sander/Grinder, RE, 12K, 1/4in Collet

$1,324.40

RA SND/GRD, ERGO, RE, 14. 5, 4" TP27

DC 12L2778-84

RA SND/GRD, ERGO, RE, 14. 5, 4" TP27

$1,496.40

RA Sander/Grinder, 12K, 1/4in Collet

DC 12LF200-36

RA SNDR/GRD,12K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH version includes 4ft overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$688.00

Right Angle Grinder

DC 12LF280-36

RA SNDR/GRD,RE,12K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH version includes 4ft overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$688.00

Girnder, Vertical PE, NCL, 80K, 1/8in Collet

DC 12R0380-18

GRINDR VERT PENCL,80K,1/8" COL

80,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Includes over-hose

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$705.20

Pencil Grinder

DC 12R0400-18

GRD,PEN,ERGO,SHRT GRD,60K,1/8"

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$521.16

Ergo Pencil Grinder, 60K rpm, 3mm Collet

DC 12R0410-13

GRD,PENCIL,ERGO,60K,3MM COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$529.76

Pencil Grinder

DC 12R0410-16

GRD,PENCIL,ERGO,60K,3/32" COL

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$632.10

Pencil Grinder

DC 12R0410-18

GRD,PENCIL,ERGO,60K,1/8" COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$529.76

Grinder, Ergo.FE 20000 RPM 1/4 Collet

DC 12S1008-36

GRINDR ERGO,FE,20K,1/4" COLLET

12,000 - 34,000 RPM 0.3 hp (0.22 kW)

Durable and ergonomic composite housing - Ideal for die/mold and deburring

Compact size for ultimate control - easy access to confined areas

OH versions include 4' of Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.88 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm

$453.22

3/8-24 SPINDLE, 3 GRINDER

DY 02083

3/8-24 SPINDLE, 3 GRINDER

$159.72

.4 Hp Right Angle Die Grinder, 15,000 rpm, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet

DY 46001

.4 HP Right Angle Die Grinder, 15,000rpm, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet

$812.70

.4 Hp Right Angle Die Grinder, 12,000 rpm, 1/4In And 6 mm Collets

DY 47800

.4 hp Right Angle Die Grinder

12,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 12000.0
Motor RPM: 12,000

$787.50

.4 Hp 7 Degree Offset De Grinder, 30,000 rpm

DY 48337

.4 hp 7 Degree Offset Die Grinder

30,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets

Includes both 1/4in and 6mm collet inserts.

HP: 0.4
Max. RPM: 30000.0
Motor RPM: 30,000

$514.80

Right Angle Grinder

DY 48500

2in (51 mm) Diameter 7 Degree Offset Disc Sander

.4 hp, 25,000 RPM, Gearless, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51348 Locking-Type Pad (2in diameter).

Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced maintenance and down-time.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$514.80

Grinders

DC 12L1101-36

DC 12L1382-36

DC 12L2000-01

DC 12L2001-01

DC 12L2002-01

DC 12L2500-36

DC 12L2542-01

DC 12L2580-01

DC 12L2718-36

DC 12L2762-80

DC 12L2777-36

DC 12L2778-84

DC 12LF200-36

DC 12LF280-36

DC 12R0380-18

DC 12R0400-18

DC 12R0410-13

DC 12R0410-16

DC 12R0410-18

DC 12S1008-36

DY 02083

DY 46001

DY 47800

DY 48337

DY 48500

Payment options