Airpower | GRACO INC. S10595 branded products

Silver Tip

GG 163221

SILVER FLAT TIP, SPRAY TC

Graco 163221 Silver Flat Tip, 221

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 221 Silver Flat Tip has a 0.021 inch orifice and produces a 4 to 6 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 10
Maximum Fan Width (in): 4
Maximum Fan Width (mm): 152

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 4
Minimum Fan Width (mm): 102

Orifice Diameter (in): 0.021

Pattern Size (in): 4 to 6
Pattern Size (mm): 101.6 to 152.4

$54.25

GB Tip.Spray TC

GG 163223

SILVER FLAT TIP, SPRAY TC

Graco 163223 Silver Flat Tip, 223

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 223 Silver Flat Tip has a 0.023 inch orifice and produces a 4 to 6 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 10
Maximum Fan Width (in): 4
Maximum Fan Width (mm): 152

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 4
Minimum Fan Width (mm): 102

Orifice Diameter (in): 0.023

Pattern Size (in): 4 to 6
Pattern Size (mm): 101.6 to 152.4

$54.25

GB Tip, Spray TC

GG 163225

SILVER FLAT TIP, SPRAY TC

Graco 163225 Silver Flat Tip, 225

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 225 Silver Flat Tip has a 0.025 inch orifice and produces a 4 to 6 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 10
Maximum Fan Width (in): 4
Maximum Fan Width (mm): 152

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 4
Minimum Fan Width (mm): 102

Orifice Diameter (in): 0.025

Pattern Size (in): 4 to 6
Pattern Size (mm): 101.6 to 152.4

$54.25

Silver Tip

GG 163311

SILVER FLAT TIP, SPRAY TC

Graco 163311 Silver Flat Tip, 311

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 311 Silver Flat Tip has a 0.011 inch orifice and produces a 6 to 8 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.13
Maximum Flow Rate (L/min): 0.49

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.011

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$54.25

FF Flat Tip, Spray Tc

GG 163312

FF FLAT TIP, SPRAY TC

Graco 163312 Fine Finish Flat Tip, 312

The 312 Fine Finish Flat Tip produces a 6 to 8 inch fan pattern and a 0.012 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 20.3
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.012

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$66.00

Silver Tip, .015 x 6

GG 163315

SILVER FLAT TIP, SPRAY TC

Graco 163315 Silver Flat Tip, 315

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 315 Silver Flat Tip has a 0.015 inch orifice and produces a 6 to 8 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.015

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$54.25

Silver Tip

GG 163313

SILVER FLAT TIP, SPRAY TC

Graco 163313 Silver Flat Tip, 313

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 313 Silver Flat Tip has a 0.013 inch orifice and produces a 6 to 8 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.013

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$54.25

Silver Tip

GG 163317

SILVER FLAT TIP, SPRAY TC

Graco 163317 Silver Flat Tip, 317

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 317 Silver Flat Tip has a 0.017 inch orifice and produces a 6 to 8 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.017

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$54.25

FF Flat Tip, Spray Tc

GG 163316

FF FLAT TIP, SPRAY TC

Graco 163316 Fine Finish Flat Tip, 316

The 316 Fine Finish Flat Tip produces a 6 to 8 inch fan pattern and a 0.016 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 20.3
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.27
Maximum Flow Rate (L/min): 1.02

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.016

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$66.00

Silver Tip

GG 163323

SILVER FLAT TIP, SPRAY TC

Graco 163323 Silver Flat Tip, 323

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 323 Silver Flat Tip has a 0.023 inch orifice and produces a 6 to 8 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152

Orifice Diameter (in): 0.023

Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$54.25

SILVER FLAT TIP, 409

GG 163409

SILVER FLAT TIP, SPRAY TC

Graco 163409 Silver Flat Tip, 409

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 409 Silver Flat Tip has a 0.009 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.087
Maximum Flow Rate (L/min): 0.33

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.009

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

FF Flat Tip, Spray Tc

GG 163408

FF FLAT TIP, SPRAY TC

Graco 163408 Fine Finish Flat Tip, 408

The 408 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.008 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.069
Maximum Flow Rate (L/min): 0.26

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.008

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

SILVER FLAT TIP, 411

GG 163411

SILVER FLAT TIP, SPRAY TC

Graco 163411 Silver Flat Tip, 411

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 411 Silver Flat Tip has a 0.011 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.13
Maximum Flow Rate (L/min): 0.49

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.011

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

FF Flat Tip, Spray Tc

GG 163414

FF FLAT TIP, SPRAY TC

Graco 163414 Fine Finish Flat Tip, 414

The 414 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.014 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.21
Maximum Flow Rate (L/min): 0.79

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.014

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

FF Flat Tip, Spray Tc

GG 163412

FF FLAT TIP, SPRAY TC

Graco 163412 Fine Finish Flat Tip, 412

The 412 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.012 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.012

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

SILVER FLAT TIP, 413

GG 163413

SILVER FLAT TIP, SPRAY

Graco 163413 Silver Flat Tip, 413

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 413 Silver Flat Tip has a 0.013 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.013

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

FF Flat Tip, Spray Tc

GG 163416

FF FLAT TIP, SPRAY TC

Graco 163416 Fine Finish Flat Tip, 416

The 416 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.016 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.27
Maximum Flow Rate (L/min): 1.02

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.016

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

Silver Flat Tip, Spray Tc

GG 163415

SILVER FLAT TIP, SPRAY TC

Graco 163415 Silver Flat Tip, 415

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 415 Silver Flat Tip has a 0.015 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.015

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

FF Flat Tip, Spray Tc

GG 163418

FF FLAT TIP, SPRAY TC

Graco 163418 Fine Finish Flat Tip, 418

The 418 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.018 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.35
Maximum Flow Rate (L/min): 1.32

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.018

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

GB Tip, Spray TC

GG 163419

SILVER FLAT TIP, SPRAY TC

Graco 163419 Silver Flat Tip, 419

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 419 Silver Flat Tip has a 0.019 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.39
Maximum Flow Rate (L/min): 1.48

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.019

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

Silver Tip, P

GG 163417

SILVER FLAT TIP, SPRAY TC

Graco 163417 Silver Flat Tip, 417

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 417 Silver Flat Tip has a 0.017 inch orifice and produces a 8 to 10 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.017

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$54.25

FF Flat Tip, Spray Tc

GG 163420

FF FLAT TIP, SPRAY TC

Graco 163420 Fine Finish Flat Tip, 420

The 420 Fine Finish Flat Tip produces an 8 to 10 inch fan pattern and a 0.020 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.43
Maximum Flow Rate (L/min): 1.63

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.020

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$66.00

GB TIP, SPRAY TC

GG 163511

SILVER FLAT TIP, SPRAY TC

Graco 163511 Silver Flat Tip, 511

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 511 Silver Flat Tip has a 0.011 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.13
Maximum Flow Rate (L/min): 0.49

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.011

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163515

SILVER FLAT TIP, SPRAY TC

Graco 163515 Silver Flat Tip, 515

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 515 Silver Flat Tip has a 0.015 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.015

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

FF Flat Tip, Spraytc

GG 163514

FF FLAT TIP, SPRAYTC

Graco 163514 Fine Finish Flat Tip, 514

The 514 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.014 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.21
Maximum Flow Rate (L/min): 0.79

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.014

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$66.00

Silver Tip

GG 163517

SILVER FLAT TIP, SPRAY TC

Graco 163517 Silver Flat Tip, 517

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 517 Silver Flat Tip has a 0.017 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.017

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

FF Flat Tip, Spray Tc

GG 163516

FF FLAT TIP, SPRAY TC

Graco 163516 Fine Finish Flat Tip, 516

The 516 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.016 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.27
Maximum Flow Rate (L/min): 1.02

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.016

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$66.00

Silver Tip

GG 163519

SILVER FLAT TIP, SPRAY, TC

Graco 163519 Silver Flat Tip, 519

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 519 Silver Flat Tip has a 0.019 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.39
Maximum Flow Rate (L/min): 1.48

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.019

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163521

SILVER FLAT TIP, SPRAY TC

Graco 163521 Silver Flat Tip, 521

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 521 Silver Flat Tip has a 0.021 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.021

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163523

SILVER FLAT TIP, SPRAY TC

Graco 163523 Silver Flat Tip, 523

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 523 Silver Flat Tip has a 0.023 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.023

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163525

SILVER FLAT TIP, SPRAY TC

Graco 163525 Silver Flat Tip, 525

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 525 Silver Flat Tip has a 0.025 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.025

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163527

SILVER FLAT TIP, SPRAY TC

Graco 163527 Silver Flat Tip, 527

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 527 Silver Flat Tip has a 0.027 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.78
Maximum Flow Rate (L/min): 2.95

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.027

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

GB Tip, Spray RC, FF

GG 163535

SILVER FLAT TIP, SPRAY TC, FF

Graco 163535 Silver Flat Tip, 535

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 535 Silver Flat Tip has a 0.035 inch orifice and produces a 10 to 12 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.035

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$54.25

Silver Tip

GG 163609

SILVER FLAT TIP, SPRAY TC

Graco 163609 Silver Flat Tip, 609

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 609 Silver Flat Tip has a 0.009 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.087
Maximum Flow Rate (L/min): 0.33

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.009

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

FF Flat Tip, Spray Tc

GG 163610

FF FLAT TIP, SPRAY TC

Graco 163610 Fine Finish Flat Tip, 610

The 610 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.010 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.11
Maximum Flow Rate (L/min): 0.42

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.010

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Tip

GG 163611

SILVER FLAT TIP, SPRAY TC

Graco 163611 Silver Flat Tip, 611

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 611 Silver Flat Tip has a 0.011 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.13
Maximum Flow Rate (L/min): 0.49

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.011

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

FF Flat Tip, Spray Tc

GG 163612

FF FLAT TIP, SPRAY TC

Graco 163612 Fine Finish Flat Tip, 612

The 612 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.012 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.012

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Tip

GG 163613

SILVER FLAT TIP, SPRAY TC

Graco 163613 Silver Flat Tip, 613

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 613 Silver Flat Tip has a 0.013 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.013

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

FF Flat Tip, Spray Tc

GG 163614

FF FLAT TIP, SPRAY TC

Graco 163614 Fine Finish Flat Tip, 614

The 614 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.014 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.21
Maximum Flow Rate (L/min): 0.79

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.014

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Tip

GG 163615

SILVER FLAT TIP, SPRAY TC

Graco 163615 Silver Flat Tip, 615

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 615 Silver Flat Tip has a 0.015 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.015

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$52.00

Silver Tip

GG 163617

SILVER FLAT TIP, SPRAY TC

Graco 163617 Silver Flat Tip, 617

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 617 Silver Flat Tip has a 0.017 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.017

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

FF Flat Tip, Spray Tc

GG 163620

FF FLAT TIP, SPRAY TC

Graco 163620 Fine Finish Flat Tip, 620

The 620 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.020 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.43
Maximum Flow Rate (L/min): 1.63

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.020

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Tip

GG 163627

SILVER FLAT TIP, SPRAY TC

Graco 163627 Silver Flat Tip, 627

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 627 Silver Flat Tip has a 0.027 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.78
Maximum Flow Rate (L/min): 2.95

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.027

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

FF Flat Tip, Spray Tc

GG 163624

FF FLAT TIP, SPRAY TC

Graco 163624 Fine Finish Flat Tip, 624

The 624 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.024 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.62
Maximum Flow Rate (L/min): 2.35

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.024

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Flat Tip, 713

GG 163713

SILVER FLAT TIP, SPRAY TC

Graco 163713 Silver Flat Tip, 713

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 713 Silver Flat Tip has a 0.013 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.013

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

FF Flat Tip, Spray Tc

GG 163626

FF FLAT TIP, SPRAY TC

Graco 163626 Fine Finish Flat Tip, 626

The 626 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.026 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.73
Maximum Flow Rate (L/min): 2.76

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.026

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

FF Flat Tip, Spray Tc

GG 163618

FF FLAT TIP, SPRAY TC

Graco 163618 Fine Finish Flat Tip, 618

The 618 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.018 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.35
Maximum Flow Rate (L/min): 1.32

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.018

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

FF Flat Tip, Spray Tc

GG 163622

FF FLAT TIP, SPRAY TC

Graco 163622 Fine Finish Flat Tip, 622

The 622 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.022 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.52
Maximum Flow Rate (L/min): 1.97

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.022

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$66.00

Silver Flat Tip, 712

GG 163712

FF FLAT TIP, SPRAY TC

Graco 163712 Fine Finish Flat Tip, 712

The 712 Fine Finish Flat Tip produces a 14 to 16 inch fan pattern and a 0.012 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 40.6
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.012

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$66.00

Silver Tip

GG 163655

SILVER FLAT TIP, SPRAY TC

Graco 163655 Silver Flat Tip, 655

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 655 Silver Flat Tip has a 0.055 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 3.25
Maximum Flow Rate (L/min): 12.30

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.055

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Flat Tip, 719

GG 163719

SILVER FLAT TIP, SPRAY TC

Graco 163719 Silver Flat Tip, 719

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 719 Silver Flat Tip has a 0.019 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.39
Maximum Flow Rate (L/min): 1.48

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.019

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 723, Ea, Sold in Multiplies of 6

GG 163723

SILVER FLAT TIP, SPRAY TC

Graco 163723 Silver Flat Tip, 723

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 723 Silver Flat Tip has a 0.023 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.023

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 716

GG 163716

FF FLAT TIP, SPRAY TC

Graco 163716 Fine Finish Flat Tip, 716

The 716 Fine Finish Flat Tip produces a 14 to 16 inch fan pattern and a 0.016 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 40.6
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.27
Maximum Flow Rate (L/min): 1.02

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.016

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$66.00

Silver Flat Tip, 731

GG 163731

SILVER FLAT TIP, SPRAY TC

Graco 163731 Silver Flat Tip, 731

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 731 Silver Flat Tip has a 0.031 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 1.03
Maximum Flow Rate (L/min): 3.90

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.031

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 733

GG 163733

SILVER FLAT TIP, SPRAY TC

Graco 163733 Silver Flat Tip, 733

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 733 Silver Flat Tip has a 0.033 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 1.17
Maximum Flow Rate (L/min): 4.43

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.033

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Tip

GG 163735

SILVER FLAT TIP, SPRAY TC

Graco 163735 Silver Flat Tip, 735

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 735 Silver Flat Tip has a 0.035 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.035

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 711

GG 163711

SILVER FLAT TIP, SPRAY TC

Graco 163711 Silver Flat Tip, 711

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 711 Silver Flat Tip has a 0.011 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.13
Maximum Flow Rate (L/min): 0.49

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.011

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 815

GG 163815

SILVER FLAT TIP, SPRAY TC

Graco 163815 Silver Flat Tip, 815

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 815 Silver Flat Tip has a 0.015 inch orifice and produces a 16 to 18 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.015

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$54.25

Silver Flat Tip, 721

GG 163721

SILVER FLAT TIP, SPRAY TC

Graco 163721 Silver Flat Tip, 721

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 721 Silver Flat Tip has a 0.021 inch orifice and produces a 14 to 16 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.021

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$54.25

Silver Flat Tip, 821

GG 163821

SILVER FLAT TIP, SPRAY TC

Graco 163821 Silver Flat Tip, 821

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 821 Silver Flat Tip has a 0.021 inch orifice and produces a 16 to 18 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.021

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$54.25

Silver Tip

GG 163629

SILVER FLAT TIP, SPRAY TC

Graco 163629 Silver Flat Tip, 629

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 629 Silver Flat Tip has a 0.029 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.41

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.029

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Tip

GG 163621

SILVER FLAT TIP, SPRAY TC

Graco 163621 Silver Flat Tip, 621

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 621 Silver Flat Tip has a 0.021 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.021

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Tip

GG 163823

SILVER FLAT TIP, SPRAY TC

Graco 163823 Silver Flat Tip, 823

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 823 Silver Flat Tip has a 0.023 inch orifice and produces a 16 to 18 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.023

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$54.25

FF Flat Tip, Spray Tc

GG 163824

FF FLAT TIP, SPRAY TC

Graco 163824 Fine Finish Flat Tip, 824

The 824 Fine Finish Flat Tip produces a 16 to 18 inch fan pattern and a 0.024 inch orifice.

Model: Fine Finish
Series: Flat Tip

Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 45.7
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.62
Maximum Flow Rate (L/min): 2.35

Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (psi): 3000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.024

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$66.00

Silver Tip

GG 163625

SILVER FLAT TIP, SPRAY TC

Graco 163625 Silver Flat Tip, 625

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 625 Silver Flat Tip has a 0.025 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.025

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Tip

GG 163671

SILVER FLAT TIP, SPRAY TC

Graco 163671 Silver Flat Tip, 671

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 671 Silver Flat Tip has a 0.071 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 5.41
Maximum Flow Rate (L/min): 20.48

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.071

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Tip

GG 163633

SILVER FLAT TIP, SPRAY TC

Graco 163633 Silver Flat Tip, 633

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 633 Silver Flat Tip has a 0.033 inch orifice and produces a 12 to 14 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 1.17
Maximum Flow Rate (L/min): 4.43

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.033

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$54.25

Silver Flat Tip, 839

GG 163839

SILVER FLAT TIP, SPRAY TC

Graco 163839 Silver Flat Tip, 839

Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 839 Silver Flat Tip has a 0.039 inch orifice and produces a 16 to 18 inch fan.

Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.

Model: Silver
Series: Flat Tip

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 1.63
Maximum Flow Rate (L/min): 6.17

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.039

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$54.25

SCREW, M10, 40MM

GG 17B770

SCREW, M10, 40MM

$2.75

Kit, Repair, Diaphragm Valve

GG 17C128

KIT, REPAIR, DIAPHRAGM VALVE

$0.00

Harness, Board, Mxm, Co mm

GG 17A559

Harness, Board, Mxm, Co mm

$96.25

Graco Sprayer, 390, Pc, Stand

GG 17C310

GRACO SPRAYER, 390, PC, STAND

Graco 17C310 390 PC Electric Airless Sprayer, Stand

The 390 PC Stand is a solid workhorse built for the professional just starting out.Lightweight and portable, its easy to Lift and carry. The 390 PC is the ideal sprayer for residential jobs, and is the best value in small electric sprayers.

Application: The ideal sprayer for residential jobs and the best value in small electric sprayers.

Durable Endurance Chromex Piston Pump
Lasts 2X longer than the next leading brand
Long Life V-Max Blue Packings, Chromex rod and hardened stainless steel cylinder
Faster cleaning with the QuikAccess intake valve
Advantage Drive
The longest lasting drive
Hardened steel gears provide extremely quiet operation and a Lifetime Warranty
ProConnect One-Part Pump Replacement System
Eliminate costly downtime
Pump swaps in minutes - no tools, pins or parts to lose
Rugged Steel Frame
Thick chrome over steel withstands rugged environments
4 leg stand provides greater stability
Variable Pressure Control
Position indicator allows repeatable setting
Swivel Inlet Suction Hose
Easily reaches paint buckets
Contractor FTx Airless Spray Gun
Standard features
Economic choice for everyday use

Series: 390 PC

Amperage (A): 13

Compatible Material: Acrylics, Enamel, Lacquer, Latex, Stains
Compatible Replacement Pump: 17C487

Cycles Per Gallon: 700

Engine Size (HP): 0.625

Features: Endurance Chromex Pump, Advantage Drive, ProConnect, Easy Out Filter

Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Type: NPSM

Frame Configuration: Stand

Includes: FTx Gun, RAC X LP 515 Spray Tip, RAC X Guard, 1/4 in x 50 ft BlueMax II Airless Hose, TSL 4 oz

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.8

Maximum Sound Pressure Level (dB(A)): 90

Maximum Tip Size (in): 0.021

Maximum Working Pressure (bar): 228
Maximum Working Pressure (kPa): 22800
Maximum Working Pressure (MPa): 22.8
Maximum Working Pressure (psi): 3300

Minimum Generator Power (W): 3000

Motor Type: DC

Number of Guns: 1

Outlet Paint Filter: 60 Mesh Stainless Steel Screen

Overall Height (cm): 47
Overall Height (in): 18.5
Overall Height (mm): 470
Overall Length (cm): 40.6
Overall Length (in): 16
Overall Length (mm): 406
Overall Width (cm): 35.6
Overall Width (in): 14
Overall Width (mm): 356

Phase: 1

Power Rating (HP): 0.625
Power Rating (kW): 0.47
Power Rating (W): 466
Power Source: Electric

Pump Mount Type: ProConnect

Pump Rod Type: Chromex
Pump Sleeve Material: Hardened Steel
Pump Type: Endurance

Recommended Annual Usage: Up to 50 gallons per week

$0.00

Kit, Pump, St, Pc, Na

GG 17C487

KIT, PUMP, ST, PC, NA

Graco 17C487 Endurance Chromex Piston Pump

Genuine Graco Endurance Pumps lead the industry in durability and ease of installation. Keep a spare on hand to minimize downtime in the field.

Application: Replacement pump for 390 PC, Ultra 395 PC, Ultra Max II 490/495/595 PC Pro, and FinishPro II 395 PC/595 PC Pro sprayers model year 2014 and newer.

Lasts 2X longer than the next leading brand
Long Life V-Max Blue Packings, Chromex rod and hardened stainless steel cylinder
Faster cleaning with the QuikAccess intake valve

Model: Endurance
Series: Chromex

Fluid Inlet Size (cm): 2.5400
Fluid Inlet Size (in): 1

Fluid Outlet Size (in): 1/4

For Use With: 390 PC (2014 and newer), Ultra 395 PC (2014 and newer), Ultra Max II 490 PC Pro (2014 and newer), Ultra Max II 495 PC Pro (2014 and newer), Ultra Max II 595 PC Pro (2014 and newer), FinishPro II 395 PC (2014 and newer), FinishPro II 595 PC Pro (2014 and newer), Magnum A100 ProPlus

Maximum Working Pressure (psi): 3300

$410.00

Chamber, Bellows, Machined

GG 17A585

Chamber, Bellows, Machined

$822.00

Cable, Tof, Lapp To Souriau, Shld

GG 17C694

Cable, Tof, Lapp To Souriau, Shld

$925.00

Plate, Machining, Pump Mount

GG 17A623

Plate, Machining, Pump Mount

$688.00

Kit, Repair, Regulator, Air

GG 17C132

Kit, Repair, Regulator, Air

$365.00

Kit, Repair, Lid

GG 17B636

KIT, REPAIR, LID

Graco 17B636 Graco handheld replacement lid

Replacement lid for Graco handheld sprays

Application: For use on TrueCoat 360 models, TC Pro, TC Pro Plus models & Ultimate models

For water or mineral spirits based coatings

For Use With: Magnum A5 Compact DS

$26.40

Kit, Gauge, Air Regulator

GG 17C133

KIT, GAUGE, AIR REGULATOR

$0.00

Washer, Seal, Retainer

GG 17B752

Washer, Seal, Retainer

$4.05

Kit, Repair, Tie Rod

GG 17B185

Kit, Repair, Tie Rod

$163.50

Rod, Tie

GG 17C261

Rod, Tie

$103.50

Token, GCA, Upgrade, LSR

GG 17C706

Token, GCA, Upgrade, LSR

$260.00

SHIM, PUMP, FIREBALL 225

GG 17C270

SHIM, PUMP, FIREBALL 225

$28.10

Lubepro A2600 Pump, Ll, Grease

GG 17C751

LUBEPRO A2600 PUMP, LL, GREASE

Graco 17C751 LubePro A2600 Horizontal Grease Pump, 2 L Reservoir, Normally Open, Low Level - NPT

Without proper lubrication your factorys machines can suffer from downtime and reduced life, which impacts your companys bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Gracos Fire-Ball pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Grease Pump for Automatic Lubrication

LubePro A2600 is compatible with GL-1, GL-32 and GL-33 injectors
Pressure Ratio of 26:1
A2600 delivers a greater output than competitive models at 2.2 in cu (36.05 cm cu ) per stroke
Optional Low Level Detection available, factory installed
Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
Built with high-quality seals tested to outperform the competition
High-strength, shatter resistant, 2 liter reservoir
Optimally lubricates while your machines are running
Provides accurate, reliable lubrication for every lube point
Provides higher lube output and faster lubrication cycle

Model: LubePro
Series: A2600

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Application: In-Plant Machinery

Compatible Material: Grease
Compatible Metering Device: Series Progressive, Single Line Parallel

Fluid Outlet Size (in): 0.75
Fluid Outlet Size (mm): 19.0500
Fluid Outlet Thread Type: NPT

Includes: Low Level

Maximum Air Inlet Pressure (bar): 9.31
Maximum Air Inlet Pressure (kPa): 931
Maximum Air Inlet Pressure (psi): 135

Maximum NLGI Grade: #2

Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500

Overall Height (cm): 47.3
Overall Height (in): 18.62
Overall Height (mm): 473

Power Type: Pneumatic

$2,190.00

Kit, Repair, St Mot, 120V, W/Fan

GG 17C794

KIT, REPAIR, ST MOT, 120V, W/FAN

Graco 17C794 210ES Motor Paint Sprayer Kit for 210ES Sprayer

Replace a worn or damaged motor with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility

Application: Graco's dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to protect your investment and keep your sprayer looking sharp for years to come.

If it fails to rotate, it will not prime or spray
Motor comes assembled with the fan
For use with Pro210ES Airless Paint Sprayer Stand, 16D163 or Cart 17C305

$688.00

Kit, Repair, Manifold, M2K

GG 17D016

Kit, Repair, Manifold, M2K

$943.00

Nut, Bellow

GG 17D102

Nut, Bellow

$76.75

Kit, Husky 205 Flush, M2K

GG 17D473

Kit, Husky 205 Flush, M2K

$1,060.00

Kit, Repair, Pump, Gh Standard

GG 17D601

Kit, Repair, Pump, Gh Standard

$151.50

Adapter, Sleeve, 25Cc

GG 17D760

Adapter, Sleeve, 25Cc

$275.00

Filter, Fluid

GG 17D762

Filter, Fluid

$1,690.00

Manifold, Mechanical 2K

GG 17D763

Manifold, Mechanical 2K

$5,240.00

Pump, President, Sealed, SST, 3:1

GG 17E225

PRESIDENT PUMP,SEALED,SST,3:1

Graco 17E225 3:1 President 4-Ball Pneumatic Pump, 750 cc, sealed SST Lower, 460 psi Max Working Pressure, Tri-Clamp, Standard Pump Length

Graco's high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.

Excellent abrasion and corrosion resistance with large porting for excellent priming and handling of high viscosity fluids
Stainless steel and carbon steel wetted parts for a wide range of fluids
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials

Model: President
Series: 4-Ball

Air Inlet Size (in): 0.5
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Circulation

Compatible Material: Waterborne, Solventborne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC

$13,600.00

Pump, President, 3:1, SS, Open

GG 17E226

PRESIDENT PUMP, OPEN, SST, 3:1

Graco 17E226 3:1 President 4-Ball Pneumatic Pump, 750 cc, Open SST Lower, 460 psi (32 bar) Max Working Pressure, NPT, Standard Pump Length

Gracos high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.

Excellent abrasion and corrosion resistance with large porting for excellent priming and handling of high viscosity fluids
Stainless steel and carbon steel wetted parts for a wide range of fluids

Model: President
Series: 4-Ball

Air Inlet Size (in): 0.5
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Circulation

Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC

Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: Open Wet Cup

Material: Stainless Steel

Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150

Maximum Continuous Cycle Rate (CPM): 12

Maximum Flow Rate (GPM): 9.6
Maximum Flow Rate (L/min): 36.34

Maximum Operating Temperature (Â°C): 66
Maximum Operating Temperature (Â°F): 150

Maximum Working Pressure (bar): 32
Maximum Working Pressure (kPa): 3200
Maximum Working Pressure (MPa): 3.2
Maximum Working Pressure (psi): 460

Portable: Non-Portable

Pump Ratio: 3:1

$12,520.00

Pump, President, Open, CS, 3:1

GG 17E227

PRESIDENT PUMP,OPEN,CS,3:1

Graco 17E227 3:1 President 4-Ball Pneumatic Pump, 750 cc, Open CS Lower, 460 psi (32 bar) Max Working Pressure, NPT, Standard Pump Length

Graco's high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.

Excellent abrasion and corrosion resistance with large porting for excellent priming and handling of high viscosity fluids
Stainless steel and carbon steel wetted parts for a wide range of fluids

Model: President
Series: 4-Ball

Air Inlet Size (in): 0.5
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Circulation

Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

$9,420.00

Jacket, Scuff, R2 Whip, 20Ft

GG 17E473

Jacket, Scuff, R2 Whip, 20Ft

$274.50

Sprayer, 695, HI, Standard

GG 17E574

ULTRAMAX SPRAYER, 695, HI, STANDARD

Graco 17E574 Ultra Max II 695 Standard Series Electric Airless Sprayer, Hi-Boy

The Ultra Max II 695 Standard Series Hi-Boy electric airless sprayer provides dependable performance with features that include a 2.0 hp brushless DC motor, industry-proven Chromex pump with 2X life, SmartControl 4.0, BlueLink Job & Sprayer Management System, the Contractor PC gun and much more.

Application: Everyday Reliability. Standard Series large electric airless sprayers are the industry standard for residential and commercial contractors looking for proven reliability to spray a wide variety of coatings with a variety of tip sizes on larger jobs.

Endurance Chromex Piston Pump
Lasts 2X Longer than competing pumps
Repack the pump in minutes with the new QuikPak Cartridge System
Faster cleaning with the QuikAccess intake foot valve
SmartControl 4.0 with ProGuard Protection System
Precision pressure control
Lowest dead band at any pressure delivers a consistent spray fan without pressure fluctuation
ProGuard prevents electrical damage from extreme jobsite power conditions
WatchDog Pump Protection System automatically prevents pump damage if material supply is too low
BlueLink Job & Sprayer Management App
Streamline Your Business
Track every sprayer: Exact location & hourly productivity
Know job progress: On demand productivity facts and reporting from anywhere
Maximize uptime: Set maintenance schedules, alerts, & jobsite notes
More info: graco.com/BlueLink
Advantage Drive
The longest lasting drive
Hardened steel gears provide extremely quiet operation
Lifetime Drive Train Warranty
FastFlush 2 System
Fast cleaning now even FASTER
Clean the pump 6X faster using 1/2 the water
High-velocity fluid flow delivered with 60% higher motor speed
Easy Out Filter
Easy maintenance & less clogging
Exclusive inside-out filtering process ensures a quality finish
Vertical design for less mess
Heavy-Duty Prime Valve
Maintenance-free high-pressure dumping capability
Durable Cart Design with Kickstand
Withstands rugged environments
Design allows for easy, one-person bucket changes
Retractable handle doubles as hose storage
Kickstand for easy one person bucket changes
Contractor PC Spray Gun
All-day comfort & control
Lightest weight gun in its class
Up to 50% lighter trigger pull force
E-Z Fit adjustable trigger length
Complete gun rebuild in seconds with ProConnect cartridge
More info: graco.com/ContractorPC

Model: Ultra Max II
Series: 695
Product Series: Standard

Amperage (A): 15

Compatible Material: Interior Latex, Exterior Latex, Oil-Based Primer, Acrylics, Block Filler

Engine Size (HP): 2

Features: Endurance Chromex Pump, SmartControl 4.0, BlueLink System, MaxPower Brushless, Advantage Drive, FastFlush 2, Easy Out Filter, Heavy-Duty Prime Valve, WatchDog, Contractor PC Gun
Filter Mesh Size: 60

Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Type: NPSM

Frame Configuration: Hi-Boy
Frequency (Hz): 50/60

$5,940.00