GRACO INC. S10595
GRACO INC. S10595 branded products
Kit, Needle Assy, Carb/Carb
GG 288191
GG 288191
KIT, NEEDLE ASSY, CARB/CARB
Graco 288191 Fluid Needle, carbide ball, standard viscosity/standard flow
$239.00
Kit, Needle Assy (Sst/Delrin)
GG 288190
GG 288190
KIT, NEEDLE ASSY (SST/DELRIN)
Graco 288190 Fluid Needle, SST ball, acid catalyzed materials/very low viscosity materials
$239.00
Kit, Diffuser Airless
GG 288196
GG 288196
KIT, DIFFUSER AIRLESS
Graco 288196 Ball Seat Diffuser- 3/16 in
$95.25
Kit, Aircap Assy, H.P.
GG 288194
GG 288194
KIT, AIRCAP ASSY, H.P.
Graco 288194 Standard Air Cap used with AAP, GG4, GG5, and AAM Series
- Compatible Material: Solvents, Paint, Coating, Lubrication-Fluid
$155.00
Kit, Diffuser Assy
GG 288192
GG 288192
KIT, DIFFUSER ASSY
Graco 288192 Diffuser-Seat, carbide seat, standard viscosity/standard flow
$120.00
Manifold, Bottom Inlet (In)
GG 288221
GG 288221
MANIFOLD, BOTTOM INLET (IN)
Graco 288221 Manifold with bottom fluid ports
$428.00
Manifold, Adjustable, Delta, High Prs
GG 288224
GG 288224
MANIFOLD, ADJUSTABLE,DELTA,HIGH PRS
Graco 288224 High Pressure Air Assisted Manifold with side fluid ports and manual fan adjustment valve
$428.00
Manifold, Side Inlet (In)
GG 288217
GG 288217
MANIFOLD, SIDE INLET (IN)
Graco 288217 North America Manifold with Side Fluid Ports
$428.00
REGULATOR, BACK PRESSURE
GG 288311
GG 288311
REGULATOR, BACK PRESSURE
Graco 288311 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 1-1/2 npt
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 3.81
- Inlet Size (in): 1-1/2
- Inlet Size (mm): 38.1
- Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.81
- Outlet Size (in): 1-1/2
- Outlet Size (mm): 38.1
- Outlet Thread Type: NPT
$4,160.00
REGULATOR, BACK PRESSURE
GG 288262
GG 288262
REGULATOR, BACK PRESSURE
Graco 288262 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 2 inch tri-clamp
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 5.08
- Inlet Size (in): 2
- Inlet Size (mm): 50.8
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 5.08
- Outlet Size (in): 2
- Outlet Size (mm): 50.8
$4,120.00
CONTRACTOR GUN, RAC X(PKGD)
GG 288420
GG 288420
CONTRACTOR GUN, RAC X(PKGD)
Contractor Airless Spray Gun, 2 Finger Trigger, RAC X 517 SwitchTip The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$470.00
FTX GUN, 2FINGER, RAC X 515, PKG
GG 288429
GG 288429
FTX GUN, 2FINGER, RAC X 515, PKG
Contractor FTx Airless Spray Gun, 2 Finger Trigger, RAC X 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 2-finger trigger and a RAC X 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$415.00
FTX GUN, RAC 5(PKGD)
GG 288431
GG 288431
FTX GUN, RAC 5(PKGD)
Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC 5 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC 5 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$415.00
KIT, GUN/HOSE, CONT, RACX, 1/4 X
GG 288489
GG 288489
KIT, GUN/HOSE, CONT, RACX, 1/4 X
Contractor Airless Spray Gun, RAC X LTX 517, BlueMax II Airless Hose 1/4 in x 50 ft, BlueMax II Airless Whip Hose 3/16 in x 3 ft Get up and spraying quickly on everyday applications with industry-proven performance. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.Contractor Airless Spray Gun
- The industry standard for performance and durability for over a decade
RAC X LTX 517 SwitchTip
- Provides a 10 inch spray pattern
- Ideal for larger surfaces such as houses/buildings, walls and ceilings
- 100% tested for flow rate
- The lightest, most flexible hoses on the market
- Easy to connect and maintain
- The highest level of performance from the sprayer to the gun
- Contractor Airless Spray Gun
- RAC X LTX 517 SwitchTip and Guard
- 3/8 inch diameter by 50 feet BlueMax II Hose
- 3 foot BlueMax II Whip Hose
$595.00
Kit, Accessory, Guard, Rac, Aa
GG 288839
GG 288839
KIT, ACCESSORY,GUARD,RAC,AA
Graco 288839 AA RAC Guard for Flat Tip RAC Tip Air Cap Conversion Kit
$164.00
Sharpe Finex 2 Conventional Gravity Gun, 1.8
GG 288887
GG 288887
Sharpe Finex 2 Conventional Gravity Gun, 1.8
$252.29
KIT, FLTR, SG20/SG PRO, 60 MESH
GG 288749
GG 288749
KIT, FLTR, SG20/SG PRO, 60 MESH
60 Mesh Gun Filter Spray gun filters improve the look of the final finish by removing unwanted debris from the paint. 60 mesh filter is for material such as primer and latex paint. Gun filters help remove debris from the coating protecting the pump, reducing tip clogging and providing a better quality finish Replace the filter if clogged more than 20% Prolong pump life and reduce tip clogging by cleaning and replacing the filter regularly Used for latex, enamels (latex) coatings Clean after every use For use with Graco spray gun models SG10, SG20, SG Pro, SG2 and SG3
$12.80
KIT, GUN/HOSE, CONT, FF, 3/16 X 25'
GG 288501
GG 288501
KIT, GUN/HOSE, CONT, FF, 3/16 X 25'
Contractor Airless Spray Gun, RAC X FF LP 210 & 312, BlueMax II Airless Hose 3/16 in x 25 ft, 10 in Extension, 2-100 Mesh FiltersGet up and spraying quickly on fine finish applications with industry-proven performance. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.
Contractor Airless Spray Gun
- The industry standard for performance and durability for over a decade
RAC X FF LP 210 & 312 SwitchTips
- Provides the industry’s best fine finish at the lowest airless spray pressure
- Reduced overspray
- Longer pump life
BlueMax II Airless Hoses
- The lightest, most flexible hoses on the market
- Easy to connect and maintain
- The highest level of performance from the sprayer to the gun
Kit Includes:
- Contractor Airless Spray Gun
- RAC X FF LP 210 and 312 SwitchTips
- BlueMax II Airless Hose 3/16 in x 25 ft
- 10 in Extension
- 2 - 100 Mesh Filters
- Solvent Seal Kit
- Cleaning Brush
$602.00
Kit, Gun Rebuild, Finex Full Size Gravity
GG 288896
GG 288896
Kit, Gun Rebuild, Finex Full Size Gravity
$104.00
Husky Pump, 2150S-Ps01As5-1Ssptptpt
GG DVR311
GG DVR311
Husky Pump, 2150S-Ps01As5-1Ssptptpt
$13,340.00
HUSKY PUMP, 2150A-PA01AA2SPSPSPPT
GG DFC666
GG DFC666
HUSKY PUMP, 2150A-PA01AA2SPSPSPPT
Husky 2150 AL Air Operated Double Diaphragm Metal Pump, SP/PTThe Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump 2 in. (51 mm) ANSI end-porting Fluid flow up to 150 gpm (568 lpm) Fluid pressure to 120 psi (8.4 bar, 0.84 MPa) Lube-free operation Epoxy-coated air section for tough environmental conditions Available in aluminum, 316 stainless steel, ductile iron and polypropylene
$2,710.00
HUSKY PUMP, 2150A-PA01AA2GEGEGEPT
GG DFCGGG
GG DFCGGG
HUSKY PUMP, 2150A-PA01AA2GEGEGEPT
Husky 2150 AL Air Operated Double Diaphragm Metal PumpThe Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump 2 in. (51 mm) ANSI end-porting Fluid flow up to 150 gpm (568 lpm) Fluid pressure to 120 psi (8.4 bar, 0.84 MPa) Lube-free operation Epoxy-coated air section for tough environmental conditions Available in aluminum, 316 stainless steel, ductile iron and polypropylene
$2,660.00
HUSKY PUMP, 1590S-PS01AS1SSPTPTPT
GG DT4311
GG DT4311
HUSKY PUMP, 1590S-PS01AS1SSPTPTPT
Husky 1590 SS Air Operated Double Diaphragm Metal Pump, SS/PTThe Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class Expanded material offering to handle endless applications Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump Offered in ATEX configuration. 1-1/2 in. (38.1 mm) ANSI end-porting High flow - 100 gpm (378 lpm) in a compact, portable size Fluid pressure to 120 psi (8.4 bar, 0.84 MPa) Lube-free operation Available in polypropylene, aluminum and stainless steel Epoxy-coated air section for tough environmental conditions
$10,280.00
E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND
GG EC3D41
GG EC3D41
E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND
E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility. Advanced model lets you easily connect and manage multiple pumps with a single control module. Quiet electric motor exceeds OSHA sound regulations, meaning happier operators and better results. Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne. Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second. Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
$30,230.00
E-FLO PUMP, 1HP, 750, ADV, TRI, SLD
GG EC1B40
GG EC1B40
E-FLO PUMP, 1HP, 750, ADV, TRI, SLD
Graco EC1B40 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Advanced model lets you easily connect and manage multiple pumps with a single control module.
- Integrated runaway protection prevents pump from premature wear and costly material loss.
- Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.
- Meets requirements of these approval agencies: ATEX, FM, IECEx
- Pump can run alone to keep production running, if lower maintenance is required.
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: Tri-Clamp
- Fluid Inlet Type: Tri-Clamp
- Fluid Outlet Size (in): 1.5
- Fluid Outlet Size (mm): 3.81
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: Tri-Clamp
- Fluid Section Type: 4-Ball, Sealed Bellows
- Includes: Advanced Control Input, No Mounting
- Maximum Continuous Cycle Rate (CPM): 20
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Voltage (V ac): 480
- Maximum Working Pressure (bar): 26
- Maximum Working Pressure (kPa): 2600
- Maximum Working Pressure (MPa): 2.6
- Maximum Working Pressure (psi): 377
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Voltage (V ac): 380
- Overall Depth (cm): 50.5
- Overall Depth (in): 19.88
- Overall Depth (mm): 505
- Overall Height (cm): 138.5
- Overall Height (in): 54.53
- Overall Height (mm): 1385
- Overall Width (cm): 43.2
- Overall Width (in): 17
- Overall Width (mm): 432
$19,930.00
E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, WALL
GG EC3D42
GG EC3D42
E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, WALL
Graco EC3D42 E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Wall
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Advanced model lets you easily connect and manage multiple pumps with a single control module.
- Integrated runaway protection prevents pump from premature wear and costly material loss.
- Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.
- Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second.
- Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: Tri-Clamp
- Fluid Inlet Type: Tri-Clamp
- Fluid Outlet Size (in): 1.5
- Fluid Outlet Size (mm): 3.81
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: Tri-Clamp
- Fluid Section Type: 4-Ball, Sealed Bellows
- Includes: Advanced Control Input, Wall Mount
- Maximum Continuous Cycle Rate (CPM): 20
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Voltage (V ac): 480
- Maximum Working Pressure (bar): 26
- Maximum Working Pressure (kPa): 2600
- Maximum Working Pressure (MPa): 2.6
- Maximum Working Pressure (psi): 377
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Voltage (V ac): 380
- Overall Depth (cm): 50.5
- Overall Depth (in): 19.88
- Overall Depth (mm): 505
- Overall Height (cm): 138.5
- Overall Height (in): 54.53
- Overall Height (mm): 1385
- Overall Width (cm): 43.2
- Overall Width (in): 17
- Overall Width (mm): 432
$32,040.00
E-Flo DC 4-Ball Electric Circulation Pump, 2000cc, 2 x 2 HP, 480V, Advanced, ATEX/FM/IECEx
GG EC4J41
GG EC4J41
E-Flo DC 4-Ball Electric Circulation Pump, 2000cc, 2 x 2 HP, 480V, Advanced, ATEX/FM/IECEx
$48,280.00
E-FLO PUMP, DC, 3000CC, SEALED
GG EC5941
GG EC5941
E-FLO PUMP, DC, 3000CC, SEALED
Graco EC5941 E-Flo DC 4-Ball Electric Circulation Pump, 3000cc, 2x2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp, Stand
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalyzed coatings
- Minimal pulsation at changeover provides a more consistent finish
- Electric motor eliminates icing – giving you smoother pump operation and better finished product
- Model: E-Flo
- Series: DC 4-Ball
- Application: Circulation
- Compatible Material: Solvent borne, High Solids, Xirallic, Metallics, Varnish, CARC
- Fluid Inlet Size (in): 1-1/2
- Fluid Inlet Size (mm): 38.1
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Section Type: Sealed
- Includes: Advanced Control Input, Stand
- Input Voltage (V ac): 240
- Material: Stainless Steel
- Maximum Continuous Cycle Rate (CPM): 20
- Maximum Flow Rate (GPM): 15.9
- Maximum Flow Rate (L/min): 60.19
- Maximum Input Amperage (A): 20
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Working Pressure (bar): 27.6
- Maximum Working Pressure (kPa): 2760
- Maximum Working Pressure (MPa): 2.8
- Maximum Working Pressure (psi): 400
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: AC
- Portable: Non-Portable
- Power Rating (HP): 4
$45,900.00
E-FLO PUMP, 2HP, 1500, ADV, NPT, OPN
GG EC3D50
GG EC3D50
E-FLO PUMP, 2HP, 1500, ADV, NPT, OPN
Graco EC3D50 E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, 480V, Advanced, ATEX/FM/IECEx, Open Wet Cup Lower, Ultralife Rod/Cylinder, NPT
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Advanced model lets you easily connect and manage multiple pumps with a single control module.
- Minimal pulsation at changeover provides a more consistent finish.
- Open wet cup lower includes Ultralife ceramic coating for improved durability.
- Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
- Meets requirements of these approval agencies: ATEX, FM, IECEx
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Inlet Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 2.54
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 4-Ball, Open Wet Cup
- Includes: Advanced Control Input, No Mounting
- Maximum Continuous Cycle Rate (CPM): 12
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Voltage (V ac): 480
- Maximum Working Pressure (bar): 26
- Maximum Working Pressure (kPa): 2600
- Maximum Working Pressure (MPa): 2.6
- Maximum Working Pressure (psi): 377
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Voltage (V ac): 380
- Overall Depth (cm): 50.5
- Overall Depth (in): 19.88
- Overall Depth (mm): 505
- Overall Height (cm): 115.6
- Overall Height (in): 45.51
- Overall Height (mm): 1156
- Overall Width (cm): 43.2
- Overall Width (in): 17
- Overall Width (mm): 432
$29,810.00
E-FLO PUMP, DC, X2, 4000CC, SEALED
GG EC6J41
GG EC6J41
E-FLO PUMP, DC, X2, 4000CC, SEALED
E-Flo DC 4-Ball Electric Circulation Pump, 4000cc, 2 x 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility. Advanced model lets you easily connect and manage multiple pumps with a single control module. Minimal pulsation at changeover provides a more consistent finish. Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne. Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second. Pump can run alone to keep production running, if lower maintenance is required.
$47,060.00
EFR SYSTEM, 240V, ADM, 50, 100, CS
GG EFR2AJRC
GG EFR2AJRC
EFR SYSTEM, 240V, ADM, 50, 100, CS
Graco EFR2AJRC 2:1 EFR Metering System 240 Volt with 50cc Low Volume and 100cc High Volume Z pumps Carbon Steel Manifold
The Graco Electric Fixed Ratio (EFR) system is a meter, mix and dispense system for two component sealant and adhesive delivery. Ideal for applications requiring precision dispense, the EFR provides superior control over material and dispensing of gaskets, beads, shots and potting applications. Trust in the EFR, which is accurate, versatile and easy to use.
- Model: EFR
Call for pricing
Kit, Motor, 1Hp, Standard
GG EM0011
GG EM0011
KIT, MOTOR,1HP, STANDARD
Graco EM0011 E-Flo DC Motor, 1 hp, Basic Controls, 220V, ATEX/FM/IECEX
$10,870.00
Kit, Motor, 1Hp, Advanced
GG EM0012
GG EM0012
KIT, MOTOR,1HP, ADVANCED
Graco EM0012 E-Flo DC Motor, 1 hp, Advanced Controls, 220V, ATEX/FM/IECEX
$12,320.00
E-Flo DC Motor, 2 hp, Basic Controls, 340-480V, ATEX/FM/IECEX
GG EM1021
GG EM1021
E-Flo DC Motor, 2 hp, Basic Controls, 340-480V, ATEX/FM/IECEX
$18,580.00
Kit, Motor, 2Hp, Advanced
GG EM1022
GG EM1022
KIT,MOTOR,2HP,ADVANCED
Graco EM1022 E-Flo DC Motor, 2 hp, Advanced Controls, 340-480V, ATEX/FM/IECEX
$19,080.00
E-FLO SP 200L 6.5 IN 100 CC SEVERE DUTY CHECK-MATE CS ALUM PLATEN 480V
GG EMC1382
GG EMC1382
E-FLO SP 200L 6.5 IN 100 CC SEVERE DUTY CHECK-MATE CS ALUM PLATEN 480V
$50,280.00
E-FLO SP 200L 6.5 IN 100 CC SEVERE DUTY CHECK-MATE CS ALUM PLATEN 480V
GG EMC1384
GG EMC1384
E-FLO SP 200L 6.5 IN 100 CC SEVERE DUTY CHECK-MATE CS ALUM PLATEN 480V
$52,790.00
E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM
GG EMC4163
GG EMC4163
E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM
E-Flo SP 20L 3 in (7.6 cm) Supply, 100cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 240V The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data. Improve process and system performance Advanced material control Significant energy savings Eliminate compressed air usage Extremely quiet motor Prevent downtime Lower maintenance costs
$40,400.00
E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 240V, ADM
GG EMC8163
GG EMC8163
E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 240V, ADM
E-Flo SP 20L 3 in (7.6 cm) Supply, 200cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 240V The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data. Improve process and system performance Advanced material control Significant energy savings Eliminate compressed air usage Extremely quiet motor Prevent downtime Lower maintenance costs
$48,160.00
E-Flo Sp Supply Unit, D200, Cm200Ss, Pt, 240V, Adm
GG EMC7273
GG EMC7273
E-FLO SP SUPPLY UNIT,D200,CM200SS,PT,240V,ADM
Graco EMC7273 E-Flo SP 200L 3 in. Supply, 200cc Severe Duty Check-Mate Stainless Steel, PTFE Coated Platen, Dual EPDM Wiper, 240V
$32,520.00
E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM
GG EMC8164
GG EMC8164
E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM
Graco EMC8164 E-Flo SP 20L 3 in. Supply, 200cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 480V
The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data.
- Improve process and system performance
- Advanced material control
- Significant energy savings
- Extremely quiet motor
- Prevent downtime
- Lower maintenance costs
- Display Type: ADM
- Drum Size (Gal): 5
- Drum Size (L): 20
- Maximum Working Pressure (psi): 3900
- Platen Material: Stainless Steel
- Platen Size (Gal): 5
- Platen Size (L): 20
- Platen Style: Single Wiper
- Pump Material: Stainless Steel Maxlife
- Pump Size (cc): 200
- Pump Type: Check-Mate
- Ram Post Diameter (in): 3
$52,990.00
COUPLER, AIR 3/4 QD (F), 3/4 NPT (M), BR
GG EQ1846
GG EQ1846
COUPLER, AIR 3/4 QD (F), 3/4 NPT (M), BR
- Connection Type: Quick-Disconnect, Threaded
$56.50
Switch, Reed, 5-120VAC/DC. LED&MOV
GG F0200043
GG F0200043
Switch, Reed, 5-120VAC/DC. LED&MOV
$245.00
E-Flo Pump, 145Cc, Adv, Duraflo, Stand
GG ES7D61
GG ES7D61
E-Flo Pump, 145Cc, Adv, Duraflo, Stand
$22,080.00
SANIFORCE AODD PUMP, 1040FG-PA01AS13SSPTPTPT21
GG FA1111
GG FA1111
SANIFORCE AODD PUMP, 1040FG-PA01AS13SSPTPTPT21
Graco FA1111 SaniForce 1040 S/S AODD Pump with 316 S/S Seats & PTFE O-Rings, Balls & Diaphragms
Graco’s SaniForce 1040 air-operated double diaphragm sanitary pumps have one of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmolded EPDM/PTFE.
- 1.5 in (38 mm) Tri-clamp connection
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
- High volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from original container to smaller receptacles - up to 10,000 cps
- Suitable to pump such products as: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies
- Model: SaniForce
- Series: 1040
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Edible Oil, Food and Personal Care
- Connection Type: Tri-Clamp
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE
- Fluid Inlet Size (cm): 3.81
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 38.1
- Fluid Outlet Size (cm): 3.81
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 38.1
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 50
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 256
- Maximum Flow Rate (GPM): 41
- Maximum Flow Rate (L/min): 151
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 0.3175
- Maximum Solid Size (in): 0.125
- Maximum Solid Size (mm): 3.175
- Power Source: Pneumatic
- Pump Ratio: 1:1
$5,050.00
Handle, Ball Knob, 1.37 Diameter
GG FAA040094
GG FAA040094
Handle, Ball Knob, 1.37 Diameter
Call for pricing
Agitator, Assembly, 1/2X24El
GG FAA040096
GG FAA040096
Agitator, Assembly, 1/2X24El
Call for pricing
Pressure Switch, 1000 - 4500 Psi
GG FAA060015
GG FAA060015
Pressure Switch, 1000 - 4500 Psi
Call for pricing
SANIFORCE AODD PUMP, 1590FG-PS01AS13SSPTPTPT21
GG FD2111
GG FD2111
SANIFORCE AODD PUMP, 1590FG-PS01AS13SSPTPTPT21
Graco FD2111 SaniForce 1590 S/S AODD Pump with Sanitary Clamp Connection, S/S Center Section & Seats, PTFE O-Rings, Balls & Diaphragms
Graco’s SaniForce 1590 air-operated double diaphragm sanitary pumps have one of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmolded EPDM/PTFE.
Application: 1-1/2 inch (38 mm) air-operated double diaphragm sanitary pump with flow rates up to 90 gpm (341 lpm) - ideal for food-related applications- SaniForce 1590 Double Diaphragm Pump
- Patented, lube-free air valve
- PTFE/EPDM Overmolded Diaphragms
Available on the SaniForce 1040, 1590, 2150 and SaniForce HS 1590 and 3150
Improve wear and diaphragm life with no exposed diaphragm plate on the fluid side
Longer diaphragm life in abrasive applications that still require PTFE
- Model: SaniForce
- Series: 1590
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: PTFE
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food and Personal Care
- Connection Type: Tri-Clamp
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE
- Fluid Inlet Size (cm): 5.08
- Fluid Inlet Size (in): 1-1/2
- Fluid Inlet Size (mm): 50.8
- Fluid Outlet Size (cm): 5.08
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 50.8
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 130
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 200
Three-way pilot valve for no-stick operation
316 series stainless steel rod design for long life and corrosion resistance
1040, 1590 and 2150 SaniForce pumps use common center sections
100% externally serviceable air valve
- PTFE/EPDM Overmolded Diaphragms
2 in (51 mm) tri-clamp connection
90 gpm (341 lpm) in a compact, portable size
Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
High volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from original container to smaller receptacles - up to 15,000 cps
Suitable to pump such products as: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies
- Patented, lube-free air valve
$7,890.00
SANIFORCE AODD PUMP, 1590FG-PS01AS13SSPTPOEP21
GG FD2213
GG FD2213
SANIFORCE AODD PUMP, 1590FG-PS01AS13SSPTPOEP21
SaniForce 1590, 1.5" FG SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PO Diaphragms Graco's SaniForce 1590, 1.5-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 100 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 1.5 inch sanitary pump with flow rates up to 100 gpm (379 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side 316 stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.1875 in. (4.8 mm)
$9,380.00
Fitting, Reducer, 08JICX12JIC, FXM, S
GG 17T211
GG 17T211
Fitting, Reducer, 08JICX12JIC, FXM, S
$290.00
Kit, Md2, Super, Soft
GG 17T040
GG 17T040
KIT,MD2,SUPER,SOFT
KIT INCLUDES: KIT, SEAL, CYLINDER, AIR, VALVE [QTY. 1], KIT, SEAL, LUBE, VALVE [QTY. 1], KIT, SEAL, NOSE, GLC, VALVE [QTY. 1]
$730.00
5 Gal (20L) Platen O-ring Bottom Seal
GG 17T371
GG 17T371
5 Gal (20L) Platen O-ring Bottom Seal
$4.50
Kit, Display
GG 17V232
GG 17V232
KIT, DISPLAY
Graco 17V232 Control Module Kit (480v) for E-Flo DC Advanced Motors
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
$3,930.00
KIT, REPAIR, MAGNUM, PUMP
GG 17V781
GG 17V781
KIT, REPAIR, MAGNUM, PUMP
Repair Kit, Pump, X5, X7 Replace a worn or damaged pump with genuine Graco parts. Completely assembled for easy installation. Replacement pump for Magnum X5 and X7 paint sprayers. Refer to the parts manual for your sprayer to ensure part compatibility Graco's dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Paints and coatings wear down parts from normal use due to the abrasives used in coatings. Use Genuine Graco parts to keep your sprayer in peak working order for years to come. Sprayer doesn't prime or spray, it may be due to piston pump packing wear or check ball valve failure Pump and valves come completely assembled For X5-series E, 262800, X7-series D, 262805 Genuine Graco parts kit includes completely assembled pump with pressure control, outlet valve, inlet valve, drain valve, push prime kit
$188.50