Spray Guns - Manual

GG 245924

GUN, SPRAY, TEXTURE

Texture Gun and Hopper

Double-handle and lightweight design provides maximum support and control for ceiling, wall and floor applications. Sprays acoustics, drywall mud, waterproofing materials, pool-deck sealant, stucco and most gravity-fed materials.

Lightweight Design - Weighs up to 35% less than comparable models to reduce operator fatigue

Angled, 1-1/2 Gallon (5.7 L) Capacity for longer spraying periods before refills

Handles on Both Sides - Rotates 180° for maximum control when spraying ceilings, walls and floors

Comfort Grip allows even distribution of weight for better balance and reduced fatigue

Durable metal trigger with conveniently located trigger adjustment allows fine tuning of fluid output for a precise and consistent finish

Exclusive Hopper Clamp - No tools needed to attach hopper to gun

GG 246240

GUN, SILVER

Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC X 517 SwitchTipThe Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard.Rugged Design

• Durable forged aluminum withstands harsh work environments
• Lighter weight than competitive guns Polished body is easy to clean

Exclusive Needle Design

• Factory set needle needs no trigger adjustments
• Guaranteed for life against breakage
• Maximum performance and long life

Stainless Steel Fluid Tube

• Fluid flows directly to the tip through the gun fluid tube
• Provides the ability to spray heavier materials
• Including high solid coatings and mastics

Optional Light Viscosity Needle Kit

• Provides faster shut-off to reduce spitting of light viscosity material
• Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)

GG 247879

Hydra-Clean Gun, And Wand Assy Sst

GG 238377

ROADLAZER GUN, SPRAY, PAINT

Single Acting Paint Spray Gun for RoadLazer RoadPakFor use with RoadLazer RoadPak line striping systems

GG 241705

HEAVY DUTY GUN, SPRAY, TEXTURE

Heavy-Duty Blue Texture Airless Spray Gun, 4 Finger Trigger, RAC XThe Heavy-Duty Blue Texture Airless Spray Gun is the ideal gun for heavy coatings and joint compounds. Includes a 4-finger trigger and a RAC X 531 SwitchTip and Guard.Oversized Fluid Path

• No-filter design offers minimal restriction and maximum flow
• Minimizes pack-out with heavy materials
• Reduces pressure drop for superior atomization

Ergonomic Design

• Form-fitting handles provide maximum control and comfort while spraying
• Optimized trigger and lightweight design allows effortless, all-day spraying

Patented Needle Design

• Factory set needle needs no adjustment – ever
• Heavy-duty design for maximum performance and long life

Jobsite Proven

• Perfect for skim coat in a Level 5 finish, drywall mud, epoxies and a whole range of paints and primers
• Contractor preferred

GG 243011

GUN, SPRAY, SG2, MAGNUM, PACKAGED

SG2 Metal Spray GunUse with any Magnum airless paint sprayer. Ideal for homeowners and diyer's for spraying a variety of coatings including primers, stains, varnishes and latex. Includes 515 spray tip, 60 mesh gun filter and hand-tight guardGraco's premium, aluminum spray gun with ergonomic design delivers solid performance and reliability. It's considered one of the longest lasting spray guns on the market. The well-balanced and lightweight full 4-finger trigger allows for a comfortable spraying experience.Full 4-finger trigger with light, smooth pull provides control and comfortThumb engaged safety lock allows you to lock the handle when not spraying for safetyMaximum operating pressure of 3,600 psiReplaceable in-handle paint filter reduces tip clogging and improves the finishReplaceable gun needle keeps maintenance simpleFor use with magnum and Graco paint sprayersIncludes 515 spray tip, 60 mesh gun filter and hand-tight guard

GG 243012

GUN, SPRAY, SG3, GRACO, PACKAGED

SG3 Metal Spray GunUse with any Magnum airless paint sprayer. Built-in hose swivel to reduce hose twists. Ideal for homeowners and diyer's for spraying a variety of coatings including primers, stains, varnishes and latex. Includes 515 spray tip, 60 mesh gun filter and hand-tight guardGraco's premium, aluminum spray gun is designed to deliver performance, be the longest lasting and most reliable spray gun on the market. The well-balanced and lightweight full 4-finger trigger allows for a comfortable spraying experience. The SG3 spray gun comes with a built-in hose swivel to help reduce hose twists.Built-in hose swivel provides for easy gun movement and reduces hose twistingFull 4-finger trigger with light, smooth pull provides control and comfortThumb engaged safety lock allows you to lock the handle when not spraying for safetyMaximum operating pressure of 3,600 psiReplaceable in-handle paint filter reduces tip clogging and improves the finishReplaceable gun needle keeps maintenance simpleFor use with Magnum and Graco paint sprayersIncludes built-in hose swivel, 515 spray tip, 60 mesh gun filter and tip guard

GG 243283

GUN, SILVER RAC

Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTipThe Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. It is the preferred gun for high pressure applications. This Silver Plus gun includes a 2 finger trigger and a RAC 5 517 SwitchTip and Guard.Rugged Design

• Durable forged aluminum withstands harsh work environments
• Lighter weight than competitive guns Polished body is easy to clean

Exclusive Needle Design

• Factory set needle needs no trigger adjustments
• Guaranteed for life against breakage
• Maximum performance and long life

Stainless Steel Fluid Tube

• Fluid flows directly to the tip through the gun fluid tube
• Provides the ability to spray heavier materials
• Including high solid coatings and mastics

Optional Light Viscosity Needle Kit

• Provides faster shut-off to reduce spitting of light viscosity material
• Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)

GG 17P653

EDGE II GUN, HVLP, CUP, PKGD

Graco 17P653 EDGE II Gun with Metal Cup

Maximize your spraying performance with the innovative HVLP EDGE II Gun. Cutting edge technology such as intuitive gun controls, Quick Release fluid set, and optimized air pressure and airflow will help you achieve the highest quality finish available in fine finish spraying.

• Integrated Flow Control

  Combines material and air flow into one simple control

  Optimized to spray the majority of fine finish applications

  Quick adjustment with 360 degree rotation and indicator for repeatable spray setting

• Adjustable Air Cap

  3-position rotation to change spray pattern

  Conveniently located at the front of the gun

• Exclusive Quick Clean Check Valve

  Allows more air pressure into the material cup to spray heavier material

  Easily clean and reuse versus replace

  Located by gun to reduce clogged valves due to paint contamination

• Quick Release Needle Design

  Change out needles from the front of the gun with just a click

  Easy to change, easy to clean with no tools needed

  Remove front air cap and nozzle

  Slide trigger lever to release needle

  Pull needle out

• Model: HVLP
• Series: EDGE II

• Compatible Material: Varnish, Enamel, Latex, Stains

• For Use With: FinishPro HVLP Sprayers

• Gun Activation: Manual
• Gun Type: HVLP Gun
• Gun Weight (oz): 20

• Includes: 1 qt (0.95 L) Metal Cup, #3 Quick Release Fluid Set

• Maximum Air Inlet Pressure (bar): 0.7
• Maximum Air Inlet Pressure (kPa): 70
• Maximum Air Inlet Pressure (MPa): 0.07
• Maximum Air Inlet Pressure (psi): 13
• Maximum Air Pressure (bar): 0.7

• Maximum Air Pressure (kPa): 70
• Maximum Air Pressure (MPa): 0.07
• Maximum Air Pressure (psi): 10

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

GG 24F202

AIRPRO GUN, PRESSURE, CONV

Graco 24F202 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, Air Brush Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Air Brush
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.11
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.1

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 24J600

FINEX GUN, GRACO

Graco 24J600 Finex Air Spray Gravity Feed Side Cup Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels - ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

Application: Easily spray small spaces and corners with the Finex gravity feed gun with swivel cup

• Aluminum cup is included with the gun
• Cup swivels for spraying in small spaces
• Light trigger pull for operator comfort
• Integrated air inlet adjustment (cheater) valve

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Side-Cup Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 24J601

FINEX GUN, GRACO

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun, conventional, 0.039 in (1.0 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels - ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

Application: Easily spray small spaces and corners with the Finex gravity feed gun with swivel cup

• Aluminum cup is included with the gun
• Cup swivels for spraying in small spaces
• Light trigger pull for operator comfort
• Integrated air inlet adjustment (cheater) valve

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Side-Cup Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.10
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 1.0

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 24M392

Airpro Gun, Efx, Conv, .039, Rnd

GG L40T10

PRO XP GUN, ES, 40KV

Pro Xp40 Air Spray Manual Electrostatic General Gun Model, 40 kV, 0.055 in (1.5 mm) nozzle, standard display, standard coatingsThis 40 kV electrostatic air spray gun comes in a compact, lightweight package.Each paint spray gun meets strict requirements for spray pattern, mechanical and electrical performance.Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.Painters experience less muscle strain and fatigue when using ergonomic, lightweight gun.Smooth, curved ergonomic handle fits nicely in your hand for more comfortable sprayingEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG L40T12

PRO XP GUN, ES, 40KV, 1.2

Pro Xp40 Air Spray Manual Electrostatic General Gun Model, 40 kV, 0.047 in (1.2 mm) nozzle, standard display, standard coatingsAvailable in 40 kV, this general model is the smallest profile gun with an internal power supply on the market. The 1.2 mm nozzle is for lower fluid flow.For applying Class A or decorative finishes with standard and specialty coatingsPainters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight electrostatic gun model.Electrostatic air spray gun meets strict requirements for spray pattern, mechanical and electrical performance.Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.

GG L40T14

PRO XP GUN, ES, 40KV, GROUND POINT

Pro Xp40 Air Spray Manual Electrostatic Gun, 40 kV Booster, 0.055 in (1.5 mm) nozzle, standard displayGet the transfer efficiency of a 60 kV electrostatic air spray gun in the compact size of a 40 kV gun. The smaller and lighter ergonomics make it ideal for operators who work in tight spaces.Easily adjust gun performance with large, simple-to-use, control knobs.Durable components are backed by a three-year warranty and A+ Service.Made in the USASmooth, curved ergonomic handle fits nicely in your hand for more comfortable sprayingEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG L40T15

PRO XP GUN, ES, 40KV, GROUND POINT, HC

Pro Xp40 Air Spray Manual Electrostatic Gun, 40 kV Booster, standard display, 0.055 in (1.5 mm) high wear nozzle, high conductivity tubeGain the transfer efficiency of a 60 kV electrostatic gun in the compact size of a 40 kV air spray gun. The longer high conductivity fluid tube lets you spray lower resistivity material.Smaller and lighter ergonomics make the manual electrostatic spray gun ideal for painters who work in tight spaces.Metal tip precision high-wear nozzle, high-wear electrode, and more durable fluid tube improve longevity.Durable components are backed by a three-year warranty and A+ Service.Made in the USASmooth, curved ergonomic handle fits nicely in your hand for more comfortable sprayingEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG L40T28

PRO XP GUN, ES, 40KV, WBX

Pro Xp WBx Air Spray Manual Waterborne External Charge Electrostatic Gun, 40 kV, standard displayExternally charged waterborne air spray gun reduces material and environmental costs without the expense and limitations of an electrostatic isolation system.For spraying conductive, waterborne fluids – no isolation system neededWaterborne material stays grounded in the gun and is charged at the tip of the electrostatic spray gun with the assistance of a probe.Two probe options meet different needs. The long probe provides the best transfer efficiency and wrap. The shorter probe is for low profile electrostatic charging.

GG L60M16

PRO XP GUN, ES, 60KV, SMART, HC

Pro Xp60 Air Spray Manual Electrostatic High Conductivity Gun, 60 kV, 0.055 in (1.5 mm) precision high wear nozzle, smart displayThis 60 kV high conductivity model combines material savings and excellent finish quality into a small, light gun body, making it easy to spray.For spraying low resistivity materials, such as abrasives and metallic coatingsSmart controls help you analyze performance, adapt to your voltage needs and troubleshoot easily.Metal tip precision high-wear nozzle, high-wear electrode, and more durable fluid tube improve longevity.Removable black fluid tube cover allows operator to see fluid movement.Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements.Made in the USA

GG L60M18

PRO XP GUN, ES, 60KV, SMART, WB

Pro Xp60 WB Air Spray Manual Electrostatic Gun, 60 kV, 0.055 in (1.5 mm) nozzle, smart display, for waterborne coatingsSuperior quality air spray consistently achieves high quality, Class A or decorative finishes with waterborne material.For spraying conductive, waterborne fluids with an isolation systemAvailable in 60 kV, it’s the smallest profile gun with an internal power supply on the market.Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight applicator.Smart controls help you analyze performance, adapt voltage needs and troubleshoot easily.Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements.Made in the USA

GG L60M19

PRO XP GUN, ES, 60KV, MOLD RELEASE

Graco L60M19 Pro Xp60 WB Air Spray Manual Electrostatic Gun, 60 kV, smart display, for mold release applications

Superior quality air spray consistently achieves high quality, Class A or decorative finishes with waterborne material.

Application: For spraying waterborne mold release materials with an isolation system

• Model for spraying mold release materials delivers fine atomized particles in a low-pressure spray with a fine finish tip.
• Available in 60 kV, it's the smallest profile gun with an internal power supply on the market.
• Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight applicator.
• Made in the USA

• Model: Pro Xp
• Series: 60

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Application: Electrostatic, Waterborne, Mold Release
• Applicator Type: Manual

• Coating Type: Waterborne, Mold Release

• Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solvent borne, Urethanes

• Display Type: Smart

• Fluid Inlet Size (in): 3/8
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Type: Electrostatic
• Gun Weight (g): 670
• Gun Weight (kg): 0.67
• Gun Weight (lb): 1.48
• Gun Weight (oz): 23.63

• Includes: Smart Display, Air Cap, Nozzle, Tool Kit, Gun Cover, Exhaust Tube

• Maximum Fluid Pressure (bar): 7.0
• Maximum Fluid Pressure (kg/cm 2): 7.14
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 48
• Maximum Fluid Temperature ( degree F): 120

• Maximum Fluid Pressure (bar): 7.0
• Maximum Fluid Pressure (kg/cm 2): 7.14
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 48
• Maximum Fluid Temperature ( degree F): 120

• Maximum Paint Resistivity (megohm/cm): 1

• Minimum Paint Resistivity (megohm/cm): 0

• Overall Length (cm): 24.13
• Overall Length (in): 9.5
• Overall Length (mm): 241.3

GG L60T12

PRO XP GUN, ES, 60KV, 1.2 NOZZLE

Pro Xp60 Air Spray Manual Electrostatic General Gun Model, 60 kV, 0.047 in (1.2 mm) nozzle, standard display, standard coatingsThe 60 kV electrostatic air spray gun is the smallest profile gun with an internal power supply on the market. The 1.2 mm nozzle is for lower fluid flow.Internal power supply reduces operator fatigue with no heavy cords to slow painters down.Each electrostatic gun meets strict requirements for spray pattern, mechanical and electrical performance.Built-in durability means the paint spray gun is designed to last – and made in the USA.Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG L60T10

PRO XP GUN, ES, 60KV

Pro Xp60 Air Spray Manual Electrostatic General Gun Model, 60 kV, 0.055 in (1.5 mm) nozzle, standard display, standard coatingsThe 60 kV electrostatic air spray gun is the smallest profile gun with an internal power supply on the market.Internal power supply reduces operator fatigue with no heavy cords to slow painters down.Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.High transfer efficiency equals less waste, saving you money on material.Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG L60T16

PRO XP GUN, ES, 60KV, HC

Pro Xp60 Air Spray Manual Electrostatic High Conductivity Gun, 60 kV, 0.055 in (1.5 mm) precision high wear nozzle, standard displayThis 60 kV high conductivity model produces material savings and excellent finish quality with a small, light gun body that’s easy to spray.For spraying low resistivity materials, such as abrasives and metallic coatingsMetal tip precision high-wear nozzle, high-wear electrode, and more durable fluid tube improve longevity.Removable black fluid tube cover allows operator to see fluid movement.Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easierEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements.Made in the USA

GG L60T18

PRO XP GUN, ES, 60KV, WB

Pro Xp60 WB Air Spray Manual Electrostatic Gun, 60 kV, 0.055 in (1.5 mm) nozzle, standard display, for waterborne coatingsSuperior quality air spray consistently achieves high quality, Class A or decorative finishes with waterborne material.For spraying conductive, waterborne fluids with an isolation systemAvailable in 60 kV, it’s the smallest profile gun with an internal power supply on the market.Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight applicator.Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easierEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements.Made in the USA