GRACO INC. S10595
GRACO INC. S10595 branded products
GL-1 XL INJECTOR, 2 POINT
GG 24X812
GG 24X812
GL-1 XL INJECTOR, 2 POINT
Graco 24X812 GL-1™ XL Grease Injector, Two Point
Custom fit your system with Graco&prime, s adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
Application: High volume output at high pressures for the most demanding applications- The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
- Includes an adjustable hex head nut to make adjusting the output simple
- No vent holes and fully enclosed press fittings to prevent leaking lubricant
- Rugged, single piece uni-body design built for the harshest environments
- Model: GL-1
- Series: XL
- Adjustable: Adjustable
- Application: In-Plant Machinery, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Single Line Parallel
- Cycle Indicator: Visual
- Dispense Outlet Size (cm): 0.33
- Dispense Outlet Size (in): 0.13
- Dispense Outlet Size (mm): 3.3
- Dispense Outlet Thread Type: NPT
- For Use With: Single Line Parallel Automatic Lubrication Systems
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Type: NPT
- Maximum NLGI Grade: #2
- Maximum Operating Pressure (psi): 6000
- Maximum Output Volume (in³): 0.315
- Maximum Reset Pressure (psi): 1000
- Maximum Working Pressure (bar): 414
- Maximum Working Pressure (kPa): 41400
- Maximum Working Pressure (MPa): 41.4
- Maximum Working Pressure (psi): 6000
- Minimum Operating Pressure (psi): 1850
- Minimum Output Volume (in³): 0.035
- Outlet Size (cm): 0.9525
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Type: NPT
$579.00
Kit, Gun, Cable
GG 24X827
GG 24X827
KIT, GUN, CABLE
Graco 24X827 Pro Xpc Auto Spray Head Kit for models LC1020 and LC2020
$4,250.00
CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P
GG 24X425
GG 24X425
CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P
ChemSafe 515 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 16.6 gpm (63 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
$4,890.00
GL-1 XL INJECTOR, REPLACEMENT
GG 24X817
GG 24X817
GL-1 XL INJECTOR, REPLACEMENT
GL-1™ XL Grease Injector, ReplacementCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
$252.00
CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO
GG 24X427
GG 24X427
CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO
ChemSafe 307 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 7.9 gpm (30 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
$2,500.00
CHEMSAFE PUMP, 205PT-P01A-PT3-PT-PT-PO
GG 24X429
GG 24X429
CHEMSAFE PUMP, 205PT-P01A-PT3-PT-PT-PO
Graco 24X429 ChemSafe 205 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port
Graco&prime, s ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There&prime, s no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they&prime, re dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
- Max flow rate of 3.6 gpm (14 lpm)
- High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
- Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
- Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
- Model: ChemSafe
- Series: 205
- Air Inlet Size (in): 1/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.635
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Size (mm): 6.35
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: PTFE
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: PTFE
- Maximum Air Consumption (SCFM): 4.8
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 375
- Maximum Flow Rate (GPM): 2.5
- Maximum Flow Rate (L/min): 9.5
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Operating Temperature (°C): 100
- Maximum Operating Temperature (°F): 212
- Maximum Solid Size (cm): 0.15
- Maximum Solid Size (in): 0.06
- Maximum Solid Size (mm): 1.5
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F):
$2,370.00
CHEMSAFE PUMP, 1590PT-P01A-PT3-PT-PT-PO
GG 24X421
GG 24X421
CHEMSAFE PUMP, 1590PT-P01A-PT3-PT-PT-PO
ChemSafe 1590 Air Operated Double Diaphragm Plastic Pump with NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 85.2 gpm (322 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
$18,510.00
CHEMSAFE PUMP, 1590UH-P01A-UH3-UH-PT-PO
GG 24X485
GG 24X485
CHEMSAFE PUMP, 1590UH-P01A-UH3-UH-PT-PO
Graco 24X485 ChemSafe™ 1590 Air Operated Double Diaphragm Plastic Pump
- Model: ChemSafe
- Series: 1590
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 3.81
- Fluid Inlet Size (in): 1-1/2
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 3.81
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: UHMWPE
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: UHMWPE
- Maximum Air Consumption (SCFM): 46
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 230
- Maximum Flow Rate (GPM): 100
- Maximum Flow Rate (L/min): 379
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Solid Size (cm): 203
- Maximum Solid Size (in): 80
- Maximum Solid Size (mm): 2030
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Storage Temperature (°C): 0
- Minimum Storage Temperature (°F): 32
- Power Source: Air
Call for pricing
Gun, P2, Automatic
GG 24X636
GG 24X636
P2 EXTREME GUN,AUTOMATIC
Graco 24X636 Automatic Probler P2 Extreme Dispense Gun
The Probler P2 Extreme Gun is lightweight and easy to mount to automation platforms - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of mix chamber movement. The Probler P2 Extreme reduces maintenance, increases spraying uptime and is easy to use in high production environments.
Application: For high output spray polyurethane foam and polyurea applications
The P2 Extreme elite:
- Extreme wear stainless steal side blox and mix chamber housings
- Alternate side block hose routings
- Allows filters to be easily removed
Easy daily maintenance
Easy-to-replace mix chamber insert
Anti-crossover design virtually eliminates possibility of material entering the air piston
- Application: Foam, Polyurea
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$9,190.00
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
GG 24X423
GG 24X423
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
ChemSafe 1040 Air Operated Double Diaphragm Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 37.5 gpm (142 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
$9,580.00
Kit, Encoder, 1000PPR, 10mm
GG 24X448
GG 24X448
KIT, ENCODER, 1000PPR, 10MM
Graco 24X448 Encoder 1000Ppr 10Mm Kit
KIT INCLUDES: ENCODER, INCREMENTAL [QTY. 1], CABLE, M12, 8-PIN, 10.0M [QTY. 1], SCREW, MACHINE [QTY. 3], BRACKET, MOUNTING, ENCODER [QTY. 1]
$1,415.00
Dura-Flo Xl Pump, 34:1, (24 Cm Sst), Lh
GG 24Y192
GG 24Y192
DURA-FLO XL PUMP,34:1,(24 CM SST),LH
Graco 24Y192 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer
- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 580cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
$25,370.00
DURA-FLO 2400 PUMP, XL, 34:1, (24 CM CS)
GG 24Y207
GG 24Y207
DURA-FLO 2400 PUMP, XL, 34:1, (24 CM CS)
Graco 24Y207 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 580cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
Improves structural integrity
- Model: Dura-Flo
- Series: XL 2400
- Air Inlet Size (in): 1
- Air Inlet Size (mm): 25.4000
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 9.2
- Maximum Flow Rate (L/min): 34.8
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Working Pressure (bar): 234
- Maximum Working Pressure (kPa): 23400
- Maximum Working Pressure (MPa): 23.4
- Maximum Working Pressure (psi): 3400
- Power Type: Pneumatic
- Pump Ratio: 35:1
$22,280.00
Dura-Flo 2400 Pump, Xl, 34:1, (24 Cm Sst), Rh
GG 24Y206
GG 24Y206
DURA-FLO 2400 PUMP,XL,34:1,(24 CM SST),RH
Graco 24Y206 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Right Hand Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer
- XL 1000 Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 580cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
$24,880.00
Dura-Flo XL Pump, 47:1, (18 CM CSTL)
GG 24Y212
GG 24Y212
Dura-Flo XL Pump, 47:1, (18 CM CSTL)
Graco 24Y212 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Right Hand Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 430cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
Improves structural integrity
- Model: Dura-Flo
- Series: XL 1800
- Air Inlet Size (in): 1
- Air Inlet Size (mm): 25.4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 6.9
- Maximum Flow Rate (L/min): 26.12
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 310
- Maximum Working Pressure (kPa): 31000
- Maximum Working Pressure (MPa): 31
- Maximum Working Pressure (psi): 4500
- Portable: Non-Portable
- Power Type: Pneumatic
- Pump Ratio: 47:1
$22,030.00
Dura-Flo 1800 Pump, XL, 47:1, (18 CM CSTL)
GG 24Y211
GG 24Y211
Dura-Flo 1800 Pump, XL, 47:1, (18 CM CSTL)
Graco 24Y211 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Long Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 430cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
Improves structural integrity
- Air Inlet Size (in): 1
- Air Inlet Size (mm): 25.4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 6.9
- Maximum Flow Rate (L/min): 26.12
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 310
- Maximum Working Pressure (kPa): 31000
- Maximum Working Pressure (MPa): 31
- Maximum Working Pressure (psi): 4500
- Portable: Non-Portable
- Power Type: Pneumatic
- Pump Ratio: 47:1
$23,180.00
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
GG 24Y240
GG 24Y240
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
50 ft x 3/8 in Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
Resistance Temperature Detector (RTD)
- Graco’s latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.
$3,020.00
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
GG 24Y241
GG 24Y241
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
50 ft x 3/8 in Heated Hose, 3500 psi, RTD, Xtreme-Wrap, Reactor 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
Resistance Temperature Detector (RTD)
- Graco’s latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.
$4,140.00
Kit, Controller, Solvent-Borne
GG 24Y307
GG 24Y307
KIT, CONTROLLER, SOLVENT-BORNE
Graco 24Y307 Pro Xpc Auto Controller, Solventborne
$9,020.00
Controller Power Cord (included in 24Y307 and 24Y308)
GG 24Y335
GG 24Y335
Controller Power Cord (included in 24Y307 and 24Y308)
$272.00
LUBEPRO H1900 PUMP
GG 24Y498
GG 24Y498
LUBEPRO H1900 PUMP
LubePro™ H1900 Horizontal Oil Pump - NPTWithout proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball® pump - the leader in durability and quality for over 50 years.
Single Stroke Oil Pump for Automatic Lubrication LubePro H1900 is compatible with GL-42 and GL-43 injectors Pressure Ratio of 19:1 H1900 delivers a greater output than competitive models at 3.0 in³ (49.2 cm³) per stroke Remote Fill - No need to manually fill the pump, its designed to attach to an oil header line from a remote fill station Pneumatic power makes it easy to install into existing air line Optional Low Level Detection available, factory installed Built with high-quality seals tested to outperform the competition Optimally lubricates while your machines are running Provides accurate, reliable lubrication for every lube point Provides higher lube output and faster lubrication cycle
$1,985.00
KIT, REPAIR, PISTON, PUMP
GG 24Y472
GG 24Y472
KIT, REPAIR, PISTON, PUMP
Graco 24Y472 ProXChange Pump
On-the-job pump repairs are fast and easy with the ProXChange Pump Replacement System. In 4 simple steps, you can remove and replace the pump cartridge. With a spare ProXChange pump on-hand, you&prime, ll never have a down day.
Application: On-the-job pump repairs are fast and easy with the ProXChange Pump Replacement System. In 4 simple steps, you can remove and replace the pump cartridge. With a spare ProXChange pump on-hand, you&prime, ll never have a down day.- Exceptional durability and long lasting piston pump
- Eliminate service center repair costs and travel time expenses
- Built-in hex nut slot on frame of sprayer for easy pump removal
- Modular in design for quick and easy repair
- Simply slide front plate up and remove entire pump to replace pump kit
- No tools required
- Model: ProXChange
- For Use With: Magnum A60 ProPlus, Magnum A80 ProPlus, Magnum ProS19 ProPlus, Magnum ProS21 ProPlus
- Includes: Labels (2), Manual, Module, Cap,
- Number of Pieces: 6
$119.00
Manifold, Mix, Plural Componet Acid
GG 24Y548
GG 24Y548
Manifold, Mix, Plural Componet Acid
$12,090.00
Manifold, Mix, Meter, Promix 2Ke Acid
GG 24Y546
GG 24Y546
Manifold, Mix, Meter, Promix 2Ke Acid
$5,150.00
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
GG 24Y678
GG 24Y678
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
Graco 24Y678 50 ft x 3/8 in Heated Hose, 2000 psi, Thermocouple, Xtreme-Wrap, Reactor 1
Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- New multi-strand copper heating element has greatly increased hose quality:
- New Xtreme-Wrap Scuff Guard
- Joint Protectors
- Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
- Hoses are covered with foam insulation for heat retention
- Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
- Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
- Helix-design whip hose uses braided copper wires for added flexibility and longer life
Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
- Model: Reactor 1
- Series: Xtreme Wrap
- Compatible Sprayer: Reactor 1
- For Use With: Plural Component Proportioners
- Hose Heating Type: External Heated
- Hose Inside Diameter (in): 3/8
- Hose Inside Diameter (mm): 9.525
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Inside Diameter (in): 3/8
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 13.8
- Maximum Working Pressure (psi): 2000
Form fitting to the hose, no more baggy excess material
Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
Sheds surface moisture and won&prime, t absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures
Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
- Joint Protectors
Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses
- New Xtreme-Wrap Scuff Guard
$3,020.00
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
GG 24Y679
GG 24Y679
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
50 ft x 3/8 in Heated Hose, 3500 psi, Thermocouple, Xtreme-Wrap, Reactor 1Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
$4,140.00
KIT, MODULE, GCA, MCM, SALEABLE
GG 24Y778
GG 24Y778
KIT, MODULE, GCA, MCM, SALEABLE
KIT INCLUDES: MODULE, GCA, MCM [QTY. 1 ] KIT INCLUDES: MODULE, GCA, MCM [QTY. 1 ]
$6,500.00
KIT, LEAK DETECTOR, SOLOTECH
GG 24Y849
GG 24Y849
KIT, LEAK DETECTOR, SOLOTECH
SoloTech Leak Detector Kit
$293.00
SD SERIES 5 REEL, CORD, BLK, TRIPLUG, GFCI
GG 24Y864
GG 24Y864
SD SERIES 5 REEL, CORD, BLK, TRIPLUG, GFCI
Graco 24Y864 SD™ 5 Series 120 Volt Cord Reel - Tri-Plug GFCI Industrial Receptacle - 50 ft (15 m), 12 AWG, 15 Amp Cord - Black
Organize your work space for a safer, more productive work environment. Make Graco your single source for your entire reel bank.
- Heavy-duty steel construction, SD Series size 5.
- 50 foot cord and features a 5 foot lead-in cable.
- Duplex GFCI receptacle
- Heavy-Duty Pedestal - High-strength steel construction with rolled edges and ribbed stress points that won&prime, t flex or twist.
- Model: SD
- Series: 5
- Cord Length (ft): 50
- Cord Length (m): 15
- Includes: Tri-Plug GFCI Industrial Receptacle
- Insulation Type: SJOOW
- Maximum Current (A): 15
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Overall Height (cm): 37.59
- Overall Height (in): 14.8
- Overall Height (mm): 375.9
- Overall Length (cm): 35.2
- Overall Length (in): 13.84
- Overall Length (mm): 352
- Overall Width (cm): 11.938
- Overall Width (in): 4.7
- Overall Width (mm): 119.38
- Power Cord Connect Type: NEMA 5-15P
- Reel Color: Black
$933.00
SD SERIES 5 REEL, LIGHT, BLK, LED (110V)
GG 24Y870
GG 24Y870
SD SERIES 5 REEL, LIGHT, BLK, LED (110V)
Graco 24Y870 SD 5™ Series 120 Volt Light Reel - LED Light - 50 ft (15 m), 16 AWG, <1 Amp Cord - Black
The SD 5 and SD 10 Series Cord and Light Reels allow you to organize your work space for a safer, more productive work environment. Choose from 35, 50 and 95 foot (11, 15, 29 meter) options
to fit your shop perfectly. Make Graco your single source for your entire reel bank.
Application: Ideal for automotive dealerships, fast lube centers, service shops, heavy-duty dealerships, fleet service facilities, in-plant, lube truck, mining and more.
- Heavy-duty steel construction, SD Series size 5.
- 50 foot cord and features a 5 foot lead-in cable.
- LED light
- Heavy-Duty Pedestal
High-strength steel construction with rolled edges and ribbed stress points that won’t flex or twist.
- Model: SD
- Series: 5
- Cord Length (ft): 50
- Cord Length (m): 15
- Includes: LED Light
- Insulation Type: SJTOW
- Maximum Current (A): 0.05
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Overall Height (cm): 37.59
- Overall Height (in): 14.8
- Overall Height (mm): 375.9
- Overall Length (cm): 35.2
- Overall Length (in): 13.84
- Overall Length (mm): 352
- Overall Width (cm): 11.938
- Overall Width (in): 4.7
- Overall Width (mm): 119.38
- Power Cord Connect Type: NEMA 5-15P
- Reel Color: Black
$906.00
MANIFOLD, ASSY, CC, 2 VALVE, LP, CIRC
GG 24Y937
GG 24Y937
MANIFOLD, ASSY, CC, 2 VALVE, LP, CIRC
2 Valve SST Low Pressure Circulating Valve Low Pressure Non-Circulating Valve
$2,270.00
MANIFOLD, ASSY, CC, 2 VALVE, LP
GG 24Y936
GG 24Y936
MANIFOLD, ASSY, CC, 2 VALVE, LP
2 Valve SST Low Pressure Non-Circulating Valve Low Pressure Non-Circulating Valve
$2,270.00
MANIFOLD, ASSY, CC, 3 VALVE, LP
GG 24Y938
GG 24Y938
MANIFOLD, ASSY, CC, 3 VALVE, LP
3 Valve SST Low Pressure Non-Circulating Valve Low Pressure Non-Circulating Valve
$3,410.00
GLC CONTROL, X
GG 26A814
GG 26A814
GLC CONTROL, X
Graco 26A814 GLC X Controller
The powerful, new, easy-to-use Graco GLC X auto lubrication controller captures more information more ways, so operators, technicians and managers can make faster, smarter decisions that drive more productivity.
- Indoor/Outdoor Mountable (IP69K) - Designed to withstand all the elements, including high-pressure washes and inclement weather encountered at the harshest and dirtiest sites.
- Easy-to-Read LED Screen - Soft amber LED lighting capable of displaying text codes, faults and other data clearly in any ambient light without distracting operators.
- Real-Time System Reporting - Program and display a wide range of customizable functions – including lubrication intervals, pressure limits, lubricant levels and more.
- Universal Compatibility - One controller for all your lubrication systems simplifies training and inventory.
- Active Current Protection - 9-30 VDC, 10 Amp continuous power supply protects grease pumps from over current and entire system from misfires, electrical shorts and surges.
- Model: GLC
- Series: X
- Amperage (A): 15
- Application: In-Plant Machinery, Off-Road Equipment, On-Road Vehicles
- Auxiliary Alarm Max Switching Current (A): 10
- Auxiliary Alarm Max Switching Voltage (VDC): 9-30
- Auxiliary Alarm Voltage: 9-30 VDC
- Control Mode: Timer, Pressure, Cycle
- Count Rate (counts/sec @ 50% duty cycle): 5
- Current Consumption (A): 15
- Intrusion Rating: IP69K
- Low Level Alarm Max Switching Current (A): 10
- Low Level Alarm Max Switching Voltage (VDC): 30
- Lubrication Level Input: Input 1: 10V
- Machine Count Control Input: Input 4
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Program Time (min): 99
- Maximum Program Time (sec): 5999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum System Cycle Count: 100
- Maximum Voltage (V dc): 30
- Maximum Voltage (V): 30
- Minimum Ambient Temperature (°F): -22
- Minimum Monitor Time (hrs): 0
- Minimum Monitor Time (min): 1
- Minimum Monitor Time (sec): 0
- Minimum Monitor Time (strokes): 1
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Minimum Program Time (hrs): 0
- Minimum Program Time (min): 0
- Minimum Program Time (sec): 10
- Minimum Program Time (strokes): 1
- Minimum Storage Temperature (°C): -30
- Minimum Storage Temperature (°F): -22
- Minimum System Cycle Count: 1
- Minimum Voltage (V dc): 9
- Minimum Voltage (V): 9
- Number of Pieces: 1
- Overall Depth (cm): 5
- Overall Depth (in): 1.98
- Overall Height (cm): 16.9
- Overall Height (in): 6.66
- Overall Height (mm): 169
- Overall Width (cm): 9.2
- Overall Width (in): 3.62
- Overall Width (mm): 92
- Power Consumption (W): 450
$854.00
Kit, Manifold, Assembly, Efr, Red, Ss
GG 26B229
GG 26B229
Kit, Manifold, Assembly, Efr, Red, Ss
$1,020.00
Kit, O-Ring-F1 Pt-4
GG 26B253
GG 26B253
KIT, O-RING-F1 PT-4
Graco 26B253 1.5-inch PTFE Seal Kit
$182.00
Kit, O-Ring-F1 Fk-4
GG 26B254
GG 26B254
KIT, O-RING-F1 FK-4
Graco 26B254 1.5-inch FKM (Viton) Seal Kit
$242.00
Kit, O-Ring-Hi Fk-4
GG 26B353
GG 26B353
KIT, O-RING-HI FK-4
Graco 26B353 2-inch FKM (Viton) Seal Kit
$186.00
Kit, O-Ring-H2 Ep-4
GG 26B355
GG 26B355
KIT, O-RING-H2 EP-4
Graco 26B355 2-inch EPDM Seal Kit for FG Pump Models
$29.00
Performaa Gun, AA, 1500, GF
GG 26B500
GG 26B500
Performaa Gun, AA, 1500, GF
Graco 26B500 PerformAA 1500 Air Assist Gun with General Finishing air cap
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Indexing air cap for accurate spray position
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,140.00
PERFORMAA GUN, AA, 1500, GF, SWIVEL
GG 26B501
GG 26B501
PERFORMAA GUN, AA, 1500, GF, SWIVEL
PerformAA 1500 Air Assist Gun with General Finishing air cap and fluid swivel Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics. High quality 1500 psi air assist spray gun General finishing air cap for a wide range of materials Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice Indexing air cap for accurate spray position
$1,205.00
PERFORMAA GUN, AA, 1500, WL
GG 26B502
GG 26B502
PERFORMAA GUN, AA, 1500, WL
Graco 26B502 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap and light trigger pull
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Indexing air cap for accurate spray position
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,140.00
PERFORMAA GUN, AA, 1500, WL, SWIVEL
GG 26B503
GG 26B503
PERFORMAA GUN, AA, 1500, WL, SWIVEL
Graco 26B503 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap, light trigger pull and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Includes a low profile fluid swivel
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,200.00
PERFORMAA GUN, AA, 1500, LV, SWIVEL
GG 26B505
GG 26B505
PERFORMAA GUN, AA, 1500, LV, SWIVEL
Graco 26B505 PerformAA 1500 Air Assist Gun with Low Viscosity air cap, light trigger pull and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Low viscosity air cap for even dispersion of light materials
- Includes a low profile fluid swivel
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,205.00
Performa AA 5000 Air Assist Gun
GG 26B509
GG 26B509
PERFORMAA GUN, AA, 5000, GF, HIGH-FLOW
Graco 26B509 PerformAA 5000 Air Assist Gun with General Finishing air cap and no fluid filter
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- No fluid filter for high flow applications
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Solventborne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,295.00
PERFORMAA GUN, AA, 5000, GF
GG 26B510
GG 26B510
PERFORMAA GUN, AA, 5000, GF
Graco 26B510 PerformAA 5000 Air Assist Gun with General Finishing air cap
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Carbide fluid seat and carbide ball for durability
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,295.00
PerformAA 5000 Air Assist Gun
GG 26B512
GG 26B512
PERFORMAA GUN,AA,5000,WL,SWIVEL
Graco 26B512 PerformAA 5000 Air Assist Gun with Wood Lacquer air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Waterborne, Latex, Plural Component Materials, Polyurethane, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
$1,365.00
PERFORMAA GUN, AA, 5000, HV, SWIVEL
GG 26B513
GG 26B513
PERFORMAA GUN, AA, 5000, HV, SWIVEL
Graco 26B513 PerformAA 5000 Air Assist Gun with High Viscosity air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- High viscosity air cap for high solids and high viscosity spraying
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: High Solids, Acid Catalyzed, Epoxies, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Waterborne
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
PERFORMAA GUN, AA, 5000, WB, SWIVEL
GG 26B514
GG 26B514
PERFORMAA GUN, AA, 5000, WB, SWIVEL
Graco 26B514 PerformAA 5000 Air Assist Gun with Waterborne air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- Waterborne air cap for breaking up waterborne materials
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Waterborne, Latex, Plural Component Materials, Polyurethane, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
PERFORMAA GUN, AA, 5000, QD, SWIVEL
GG 26B515
GG 26B515
PERFORMAA GUN, AA, 5000, QD, SWIVEL
Graco 26B515 PerformAA 5000 Air Assist Gun with Quick Drying air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- Quick Drying air cap for minimizing air entrapment
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
PERFORMAA GUN, AA, 5000, LV, SWIVEL
GG 26B516
GG 26B516
PERFORMAA GUN, AA, 5000, LV, SWIVEL
Graco 26B516 PerformAA 5000 Air Assist Gun with Low Viscosity air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- Low viscosity air cap for even dispersion of light materials
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
PERFORMAA GUN, AL, 1500
GG 26B519
GG 26B519
PERFORMAA GUN, AL, 1500
Graco 26B519 PerformAA 1500 Airless Gun
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi airless spray gun
- Airless air cap for fine finish airless spraying
- Carbide fluid seat and carbide ball for durability
- Model: PerformAA 15 Airless
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: N/A
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Airless Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$683.00
KIT, O-RING-C1, PT-8
GG 26B522
GG 26B522
KIT, O-RING-C1 PT-8
Graco 26B522 3/4-inch PTFE Seal Kit
$111.00
PerformAA 1500 Air Assist Gun with Gen Finish Air Cap, Plastic seat and St Steel Ball, w/Tip of Choice
GG 26B504
GG 26B504
PERFORMAA GUN, AA, 1500, GF, ACID
Graco 26B504 PerformAA 1500 Air Assist Gun with Gen Finish air cap, plastic seat and St Steel ball
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Plastic seat and stainless steel ball for acid material compatibility
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Acid Catalyzed, Lacquer, Latex, Plural Component Materials, Solventborne, Solventborne Paints, Topcoats, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Plastic Seat, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,140.00
PERFORMAA GUN, AA, AUTO, GF
GG 26B570
GG 26B570
PERFORMAA GUN, AA, AUTO, GF
Graco 26B570 PerformAA Auto Air Assist Spray Gun with General Finishing (GF) air cap
Automatic air-assisted spray gun delivers performance above all for all general finishing needs.
- Automatic air-assisted sprayer is easy to set up, use and service on flat lines, robots, reciprocators and other automated systems
- Air cap angle indicators help operators and maintenance technicians set and quickly repeat the exact angle needed to optimize spray. For greater accuracy and ease, especially with flat line finishing, add the Graco Gauge kit 26B736.
- Manifold options, including a rear port for robots or compact spaces, have the same tool center point as legacy Graco automatic air-assisted spray guns.
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Metal
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Urethane, UV Coating, Varnish,
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Automatic
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 544
- Gun Weight (kg): 0.544
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.2
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Overall Height (cm): 7.6
- Overall Height (in): 3
- Overall Height (mm): 76.2
- Overall Length (cm): 13
- Overall Length (in): 5.3
- Overall Length (mm): 135
- Overall Width (cm): 5.1
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Product Type: Spray Gun
- Purge Method: Air
$1,500.00
PERFORMAA GUN, AA, 5000, RAC, SWIVEL
GG 26B518
GG 26B518
PERFORMAA GUN, AA, 5000, RAC, SWIVEL
Graco 26B518 PerformAA 5000 RAC Air Assist Gun with Reverse A Clean air cap and spray tip and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi RAC air assist spray gun
- Rerverse-A-Clean air cap and tip for quick cleaning
- Includes a low profile fluid swivel
- Model: PerformAA RAC
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: FFLP, LTX
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: N/A
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 19.8
- Overall Height (in): 7.8
- Overall Height (mm): 198
- Overall Length (cm): 18.3
- Overall Length (in): 7.2
- Overall Length (mm): 183
- Product Type: Spray Gun
$1,360.00
PERFORMAA GUN, AA, AUTO, WL
GG 26B571
GG 26B571
PERFORMAA GUN, AA, AUTO, WL
Graco 26B571 PerformAA Auto Air Assist Spray Gun with Wood Lacquer (WL) air cap
Automatic air-assisted spray gun delivers performance above all when spraying wood lacquer.
- Automatic air-assisted sprayer is easy to set up, use and service on flat lines, robots, reciprocators and other automated systems
- Air cap is geometrically designed for the finest atomization with the least amount of guesswork when spraying lacquer on wood products.
- Air cap angle indicators help operators and maintenance technicians set and quickly repeat the exact angle needed to optimize spray. For greater accuracy and ease, especially with flat line finishing, add the Graco Gauge kit 26B736.
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Metal
- Compatible Material: Lacquer, Latex, Plural Component Materials, Solvent borne, Topcoats, Varnish
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Automatic
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 544
- Gun Weight (kg): 0.544
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.2
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Overall Height (cm): 7.6
- Overall Height (in): 3
- Overall Height (mm): 76.2
- Overall Length (cm): 13
- Overall Length (in): 5.3
- Overall Length (mm): 135
- Overall Width (cm): 5.1
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Product Type: Spray Gun
- Purge Method: Air
$1,500.00
PERFORMAA GUN, AA, AUTO, GF, ACID
GG 26B572
GG 26B572
PERFORMAA GUN, AA, AUTO, GF, ACID
Graco 26B572 PerformAA Auto Air Assist Spray Gun with General Finishing (GF) air cap for acid-catalyzed material
Automatic air-assisted spray gun delivers performance above all when spraying acid-catalyzed material for general finishing applications.
- Automatic air-assisted sprayer is easy to set up, use and service on flat lines, robots, reciprocators and other automated systems
- Air cap angle indicators help operators and maintenance technicians set and quickly repeat the exact angle needed to optimize spray. For greater accuracy and ease, especially with flat line finishing, add the Graco Gauge kit 26B736.
- Manifold options, including a rear port for robots or compact spaces, have the same tool center point as legacy Graco automatic air-assisted spray guns.
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Metal
- Compatible Material: Acid Catalysts
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Automatic
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 544
- Gun Weight (kg): 0.544
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.2
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Overall Height (cm): 7.6
- Overall Height (in): 3
- Overall Height (mm): 76.2
- Overall Length (cm): 13
- Overall Length (in): 5.3
- Overall Length (mm): 135
- Overall Width (cm): 5.1
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Product Type: Spray Gun
- Purge Method: Air
$1,585.00
PERFORMAA GUN, AA, AUTO, RAC
GG 26B573
GG 26B573
PERFORMAA GUN, AA, AUTO, RAC
Graco 26B573 PerformAA Auto Air Assist Spray Gun with Reverse-A-Clean (RAC) air cap
Automatic air-assisted spray gun delivers performance above all when spraying a wide variety of coatings. For quick cleaning with minimal downtime, simply turn the reversible tip to the clean position and spray.
- Automatic air-assisted sprayer is easy to set up, use and service on flat lines, robots, reciprocators and other automated systems
- Air cap angle indicators help operators and maintenance technicians set and quickly repeat the exact angle needed to optimize spray. For greater accuracy and ease, especially with flat line finishing, add the Graco Gauge kit 26B736.
- Manifold options, including a rear port for robots or compact spaces, have the same tool center point as legacy Graco automatic air-assisted spray guns.
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Metal
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Urethane, UV Coating, Varnish,
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Automatic
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 544
- Gun Weight (kg): 0.544
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.2
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Overall Height (cm): 7.6
- Overall Height (in): 3
- Overall Height (mm): 76.2
- Overall Length (cm): 13
- Overall Length (in): 5.3
- Overall Length (mm): 135
- Overall Width (cm): 5.1
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Product Type: Spray Gun
- Purge Method: Air
$1,500.00
Kit, O-Ring-D2 Pt-4
GG 26B690
GG 26B690
KIT, O-RING-D2 PT-4
Graco 26B690 1-inch PTFE Seal Kit for FG Pump Models
$49.00
Gun, AA, Auto Gun wth Low Viscosity Air Cap, with tip of choice
GG 26B574
GG 26B574
PERFORMAA GUN, AA, AUTO, LV
Graco 26B574 PerformAA Auto Air Assist Spray Gun with Low Viscosity (LV) air cap
Automatic air-assisted spray gun delivers performance above all when spraying low viscosity material.
- Automatic air-assisted sprayer is easy to set up, use and service on flat lines, robots, reciprocators and other automated systems
- Air cap is geometrically designed for the finest atomization with the least amount of guesswork when spraying coatings with low viscosity.
- Air cap angle indicators help operators and maintenance technicians set and quickly repeat the exact angle needed to optimize spray. For greater accuracy and ease, especially with flat line finishing, add the Graco Gauge kit 26B736.
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Metal
- Compatible Material: Stains, Sealer, Solventborne, Toner
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Automatic
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 544
- Gun Weight (kg): 0.544
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.2
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Pressure (bar): 280
- Maximum Fluid Pressure (kPa): 28000
- Maximum Fluid Pressure (MPa): 28
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Overall Height (cm): 7.6
- Overall Height (in): 3
- Overall Height (mm): 76.2
- Overall Length (cm): 13
- Overall Length (in): 5.3
- Overall Length (mm): 135
- Overall Width (cm): 5.1
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Product Type: Spray Gun
- Purge Method: Air
$1,600.00
AGITATOR, 6:1
GG 26B630
GG 26B630
AGITATOR, 6:1
Graco 26B630 Back-Geared Radial Piston Agitator, heavy duty
Speed up savings when agitating high viscosity material. The radial piston air motor that powers this back-geared agitator uses up to 85 percent less compressed air than a comparable rotary vane motor.
Application: For agitating 500 cP to 3000 cP viscosity materials- Installs quickly for immediate cost savings
- Needs no air line lubrication to keep running well
- Operates more quietly than comparable rotary vane agitator air motors
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- For Use With: 55 Gallon (208 Liter) Drum
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 83
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
- Power Rating (HP): 0.16
$4,490.00
AGITATOR, 6:1 GEAR REDUCTION, SIPHON
GG 26B633
GG 26B633
AGITATOR, 6:1 GEAR REDUCTION, SIPHON
Graco 26B633 Back-Geared Radial Piston Agitator, heavy duty, with elevator, drum cover and siphon kit
Speed up savings when agitating high viscosity material. The radial piston air motor that powers this back-geared agitator uses up to 85 percent less compressed air than a comparable rotary vane motor.
Application: For agitating 500 cP to 3000 cP viscosity materials
- Installs quickly for immediate cost savings
- Needs no air line lubrication to keep running well
- Operates more quietly than comparable rotary vane agitator air motors
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- For Use With: 55 Gallon (208 Liter) Drum
- Includes: Elevator, drum cover and siphon kit
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 83
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
- Power Rating (HP): 0.16
$7,750.00