GRACO INC. S10595

GG 16R866

GG 16T481

GG 16T553

KIT,HOUSING,FLUID,EP,ASSY

KIT INCLUDES: HOUSING, FLUID, ASSY, EP [QTY. 1], GUN, GREASE, 3 OZ [QTY. 1], LUBRICANT, GREASE, FOOD GRADE [QTY. 1], FLUID, TSL 8 OZ BOTTLE [QTY. 1]

GG 16T541

GG 16T549

GG 16T572

GG 16T802

GG 16U217

GG 16U216

GG 16U452

GG 16U479

GG 16U480

GG 16U481

GG 16U717

GG 16V356

GG 16V360

GG 16W563

GG 16U736

GG 16U790

CABLE, DIN-BARE LEADS POWER, 15'

Graco 16U790 Power or Vent Valve Cable, DIN connector, 15 feet

• Vent valve power cable - normally open, 115 or 230 VAC valve, DIN connector, 15 feet

• For Use With: G1 Pumps, G3 Pumps

GG 16V239

GG 16U735

GG 16V704

GG 16V359

GG 16V357

GG 16V531

GG 16W130

GG 16W564

HOSE,STATIC-MIXER, LP

Graco 16W564 Static Mixer Hose, Low Pressure, Nylon, 3/8 npsm (fbe), 9.25 in. (235 mm) long

GG 16V707

GG 16V703

GG 16U981

GG 16V733

GG 16W645

GEAR BOX LUBRICANT KIT,OIL

Graco 16W645 ISO 220 Silicone-Free Synthetic Gear Oil, 1 quart (0.95 liter)

GG 16V879

CAP, FILTER

GG 16W733

GG XHD629

XHD RAC TIP, SPRAY, CYLINDER, 629

Graco XHD629 XHD RAC SwitchTip, .629

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.90
• Maximum Flow Rate (L/min): 3.41

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.029

GG XHD635

XHD RAC TIP, SPRAY, CYLINDER, 635

Graco XHD635 XHD RAC SwitchTip, .635

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.31
• Maximum Flow Rate (L/min): 4.96

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.035

GG XHD633

XHD RAC TIP, SPRAY, CYLINDER, 633

Graco XHD633 XHD RAC SwitchTip, .633

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solventborne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.17
• Maximum Flow Rate (L/min): 4.43

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.033

GG XHD627

XHD RAC TIP, SPRAY, CYLINDER, 627

Graco XHD627 XHD RAC SwitchTip, .627

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.027

GG XHD631

XHD RAC TIP, SPRAY, CYLINDER, 631

Graco XHD631 XHD RAC SwitchTip, .631

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.031

GG XHD641

XHD RAC TIP, SPRAY, CYLINDER, 641

Graco XHD641 XHD RAC SwitchTip, .641

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.80
• Maximum Flow Rate (L/min): 6.81

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.041

GG XHD645

XHD RAC TIP, SPRAY, CYLINDER, 645

Graco XHD645 XHD RAC SwitchTip, .645

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 2.17
• Maximum Flow Rate (L/min): 8.21

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.045

GG XHD651

XHD RAC TIP, SPRAY, CYLINDER, 651

Graco XHD651 XHD RAC SwitchTip, .651

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 2.79
• Maximum Flow Rate (L/min): 10.56

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.051

GG XHD655

XHD RAC TIP, SPRAY, CYLINDER, 655

Graco XHD655 XHD RAC SwitchTip, .655

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 3.25
• Maximum Flow Rate (L/min): 12.30

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.055

GG XHD665

XHD RAC TIP, SPRAY, CYLINDER, 665

Graco XHD665 XHD RAC SwitchTip, .665

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 4.53
• Maximum Flow Rate (L/min): 17.15

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.065

GG XHD671

XHD RAC TIP, SPRAY, CYLINDER, 671

Graco XHD671 XHD RAC SwitchTip, .671

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 5.41
• Maximum Flow Rate (L/min): 20.48

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.071

GG XHD675

XHD RAC TIP, SPRAY, CYLINDER, 675

Graco XHD675 XHD RAC SwitchTip, .675

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solventborne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 35.6
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 6.04
• Maximum Flow Rate (L/min): 22.86

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.075

GG XHD711

XHD RAC TIP, SPRAY, CYLINDER, 711

Graco XHD711 XHD RAC SwitchTip, .711

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solventborne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.12
• Maximum Flow Rate (L/min): 0.45

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.011

GG XHD719

XHD RAC TIP, SPRAY, CYLINDER, 719

Graco XHD719 XHD RAC SwitchTip, .719

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.019

GG XHD717

XHD RAC TIP, SPRAY, CYLINDER, 717

Graco XHD717 XHD RAC SwitchTip, .717

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.017

GG XHD727

XHD RAC TIP, SPRAY, CYLINDER, 727

Graco XHD727 XHD RAC SwitchTip, .727

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.027

GG XHD725

XHD RAC TIP, SPRAY, CYLINDER, 725

Graco XHD725 XHD RAC SwitchTip, .725

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.025

GG XHD815

XHD RAC TIP, SPRAY, CYLINDER, 815

Graco XHD815 XHD RAC SwitchTip, .815

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.015

GG XHD771

XHD RAC TIP, SPRAY, CYLINDER, 771

Graco XHD771 XHD RAC SwitchTip, .771

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 5.41
• Maximum Flow Rate (L/min): 20.48

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.071

GG XHD817

XHD RAC TIP, SPRAY, CYLINDER, 817

Graco XHD817 XHD RAC SwitchTip, .817

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.017

GG XHD819

XHD RAC TIP, SPRAY, CYLINDER, 819

Graco XHD819 XHD RAC SwitchTip, .819

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.019

GG XHD821

XHD RAC TIP, SPRAY, CYLINDER, 821

Graco XHD821 XHD RAC SwitchTip, .821

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.47
• Maximum Flow Rate (L/min): 1.78

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.021

GG XHD825

XHD RAC TIP, SPRAY, CYLINDER, 825

Graco XHD825 XHD RAC SwitchTip, .825

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.025

GG XHD827

XHD RAC TIP, SPRAY, CYLINDER, 827

Graco XHD827 XHD RAC SwitchTip, .827

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.027

GG XHD831

XHD RAC TIP, SPRAY, CYLINDER, 831

Graco XHD831 XHD RAC SwitchTip, .831

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.031

GG XHD861

XHD RAC TIP, SPRAY, CYLINDER, 861

Graco XHD861 XHD RAC SwitchTip, .861

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 4.00
• Maximum Flow Rate (L/min): 15.14

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.061

GG XHD867

XHD RAC TIP, SPRAY, CYLINDER, 867

Graco XHD867 XHD RAC SwitchTip, .867

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 4.82
• Maximum Flow Rate (L/min): 18.25

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.067

GG XHD923

XHD RAC TIP, SPRAY, CYLINDER, 923

Graco XHD923 XHD RAC SwitchTip, .923

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 50.8
• Maximum Fan Width (in): 20
• Maximum Fan Width (mm): 508

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 18
• Minimum Fan Width (mm): 457

• Orifice Diameter (in): 0.023

GG XL34L0

gg XL65D0

GG XM5N00

XM SPRAYER SYSTEM, XM50, R, IS

Graco XM5N00 XM50 System, Hazardous Location, 240V, Alternator Power, No Heaters, No Junction Box, No Feed System, Remote Manifold

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 50

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 358
• Maximum Working Pressure (MPa): 35.8
• Maximum Working Pressure (psi): 5200

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Alternator

• Primary Fluid Heater Included: No

GG XM7H2E

XM SPRAYER SYSTEM, XM70, R, 480, JB, WP, 25, E

Graco XM7H2E XM70, 480V, Wall Power, Viscon HF Heaters, Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Heated Hose Control

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 435
• Maximum Working Pressure (MPa): 43.5
• Maximum Working Pressure (psi): 6300

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Wall

• Primary Fluid Heater Included: Yes

GG XM7K2E

XM SPRAYER SYSTEM, XM70, R, 480, JB, IS, 25, E

Graco XM7K2E XM70, 480V, Alternator, EX Viscon HF Heaters, EX Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Hose Control

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 435
• Maximum Working Pressure (MPa): 43.5
• Maximum Working Pressure (psi): 6300

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Alternator

• Primary Fluid Heater Included: Yes

GG XNL65D

XDX SERIES 20 REEL, HOSE

Graco XNL65D XDX 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, No Guide Arms, Black

Graco's heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame, steel spool, sealed components and innovative swivel design for high-quality performance in the most demanding applications.

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications

• Series: 20

• Application: Air, Water, Antifreeze, WWS

• Color: Black

• Dry Weight (lb): 64

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 1/2
• Hose Inside Diameter (mm): 12.7
• Hose Length (ft): 75
• Hose Length (m): 23

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 300

• Outlet Size (in): 1/2
• Outlet Size (mm): 12.7
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 25.2
• Overall Height (mm): 640
• Overall Length (in): 21
• Overall Length (mm): 533
• Overall Width (in): 7.5
• Overall Width (mm): 191

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG XR2323

GG XTR521

XTR+ GUN, XTR5+, 1" HND, 4FNG, FLAT TIP

Graco XTR521 XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• Flat tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR522

XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

Graco XTR522 XTR5+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR523

XTR+ GUN, XTR5+, OVL HND, 2FNG, XHDRAC

Graco XTR523 XTR5+ Airless Spray Gun, Insulated Handle, 2-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR524

XTR+ GUN, XTR5+, 1" HND, 4FNG, XHDRAC

Graco XTR524 XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR530

GG XTR724

XTR+ GUN, XTR7+, 1" HND, 4FNG, XHDRAC

Graco XTR724 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR712

XTR+ GUN, XTR7-HF, OVHND, 4FNG, XHDRAC

Graco XTR712 XTR7+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you'll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR7+

GG XTR720

XTR+ GUN, XTR7+, 1" HND, 4FNG, NO TIP

Graco XTR720 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, No Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD Tip Guard compatible with XHD RAC tips
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR722

XTR+ GUN, XTR7+, OVL HND, 4FNG, XHDRAC

Graco XTR722 XTR7+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR721

XTR+ GUN, XTR7+, 1" HND, 4FNG, FLT TIP

Graco XTR721 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• Flat tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR725

XTR+ GUN, XTR7+, 1" HND, 2FNG, XHDRAC

Graco XTR725 XTR7+ Airless Spray Gun, Round Handle, 2-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG 258935

GG 258941

GG 258942

GG 258949

GG 258970

RS GUN, ASM, EXT MIX, CHOP

Graco 258970 RS External Mix Chop Gun with Cutter and Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. Its lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It's available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun's revolutionary design and industry-first features can help boost your company's bottom line.

• Makes production easier

  Simple, quick start up and shut down

  Quick tool-less blade change

  No need to adjust needle settings after maintenance

  • Improves product quality

    Lightweight cutter gives better chopping control

    Easy one-hand cutter speed control

    Superior spray pattern

    • Improves operator comfort for increased job satisfaction

      Lighter, ergonomic gun reduces fatigue

      Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

      No problems soaking the RS Gun in solvents overnight

      
      

      • Model: RS
      • Chop Gun Type: With Cutter
      • Compatible Material: Polyester Resin, Gel-Coat
      • For Use With: FRP System
      • Gun Type: Chop Gun
      • Gun Weight (g): 1057
      • Gun Weight (kg): 1.06
      • Gun Weight (lb): 2.33
      • Gun Weight (oz): 37.28
      • Includes: CST443 Tip, Cutter
      • Maximum Air Pressure (bar): 8.6
      • Maximum Air Pressure (kg/cm 2): 8.79
      • Maximum Air Pressure (kPa): 860
      • Maximum Air Pressure (psi): 125
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm 2): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature ( degree C): 38
      • Maximum Fluid Temperature ( degree F): 100
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm 2): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature ( degree C): 38
      • Maximum Fluid Temperature ( degree F): 100
      • Minimum Air Inlet Pressure (bar): 5.5
      • Minimum Air Inlet Pressure (kPa): 550
      • Minimum Air Inlet Pressure (psi): 80
      • Mix Type: External Mix

GG 258971

RS GUN, ASM, INT MIX, CHOP

Graco 258971 RS Internal Mix Chop Gun with Cutter and Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. Its lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It's available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun's revolutionary design and industry-first features can help boost your company's bottom line.

• Makes production easier

  Simple, quick start up and shut down

  Quick tool-less blade change

  No need to adjust needle settings after maintenance

  • Improves product quality

    Lightweight cutter gives better chopping control

    Easy one-hand cutter speed control

    Superior spray pattern

    • Improves operator comfort for increased job satisfaction

      Lighter, ergonomic gun reduces fatigue

      Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

      No problems soaking the RS Gun in solvents overnight

      
      

      • Model: RS
      • Chop Gun Type: With Cutter
      • Compatible Material: Polyester Resin, Gel-Coat
      • For Use With: FRP System
      • Gun Type: Chop Gun
      • Gun Weight (g): 1116
      • Gun Weight (kg): 1.12
      • Gun Weight (lb): 2.46
      • Gun Weight (oz): 39.36
      • Includes: CST443 Tip, Cutter
      • Maximum Air Pressure (bar): 8.6
      • Maximum Air Pressure (kg/cm 2): 8.79
      • Maximum Air Pressure (kPa): 860
      • Maximum Air Pressure (psi): 125
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm 2): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature ( degree C): 38
      • Maximum Fluid Temperature ( degree F): 100
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm 2): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature ( degree C): 38
      • Maximum Fluid Temperature ( degree F): 100
      • Minimum Air Inlet Pressure (bar): 5.5
      • Minimum Air Inlet Pressure (kPa): 550
      • Minimum Air Inlet Pressure (psi): 80
      • Mix Type: Internal Mix

GG 25A104

KIT,TANK,COLOR,3L

Graco 25A104 3 L Colorant Tank Kit

KIT INCLUDES: TANK, 3-QUART, FEED, CS, NKL-PLT [QTY. 1], FITTING, ELBOW, STREET [QTY. 1], ADAPTER, JIC06X1/4, MM, SS, 6K, 316 [QTY. 1], FITTING, T, 1/4TUBE, PRESTOLOCK, BRS [QTY. 1], TUBE, 250OD, POLY [QTY. 10 ], FITTING, REDUCER, TUBE, 3/8 X 1/4TUBE [QTY. 1], TAPE, SEALANT, CERAMIC, .50 in.X50 ft. [QTY. 1], SCREW, MACH, HEX FLANGE, HD [QTY. 2], BRACKET, TANK, 3L [QTY. 1], SCREW, CAP, FLNGHD [QTY. 1], NUT, LOCK, HEX [QTY. 1]

• Model: LSR

GG 25A108

KIT,INJECTOR,COLOR

Graco 25A108 Color Injector Kit

KIT INCLUDES: INJECTOR, ASSY, COLOR [QTY. 1], HOUSING, BODY, QD, 1/4NPTM, CRPLT, BRS [QTY. 1], FITTING, ELBOW, 90, JIC06X1/4NPT, MF [QTY. 1], TAPE, SEALANT, CERAMIC, .50 in.X50 ft. [QTY. 1], CABLE, 5PIN, MALE/FEMALE, 4.0 M [QTY. 1], CORD SET, EURO/MALE, DIN/FEMALE, REV [QTY. 1]

• Model: LSR

GG 25A169

GG 25A183

GG 25A197

GG 25A198

GG 25A206

GG 25A234

GG 25A207

GG 25A247

GG 25A298

KIT, DIAPHRAGM-D2 PT

GG 25A915

GG 25A909

GG 25A600