DYNABRADE INC. S12699

DY 61450

5 lbs. (2.27 kg) into 6.25 Gal. (24 L), 20 A, 120 V 50/60 Hz, Division 1, N. America

Electric Portable Vacuum for safe recovery of metallic dusts such as aluminum, magnesium, titanium, commercial alloys as aluminum, magnesium, titanium, commercial alloys. Collects maximum of 5 lbs. (2.27 kg) of dust. Designed for dry-only source capture, where fine dust must be recovered. Legally certified as explosion-proof and dust ignition-proof. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron. Filter is located downstream of the motor. Manual Filter Shaker (MFS) system.

Top-quality stainless steel body and 6.25 gallon (24 liter) recovery tank. Maximum 5 pounds (2.27 kg) of metal dust recovery. Easy one-click detaching and connecting of recovery tank. Unit is static-dissipating and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart and tool basket. Guaranteed for safe recovery of combustible/conductive dusts. Ability to connect two tools simultaneously

• HP: 1000.0

DY 61465

5 lbs. (2.27 kg) into 6.25 Gal (24 L), Division 1, N. America

Pneumatic Portable Vacuum For use with collecting metallic dusts such as aluminum, magnesium, titanium, commercial alloys. Collects maximum of 5 lbs. (2.27 kg) of dust. Designed for dry-only source capture, where fine dust must be recovered. Legally certified as explosion-proof and dust ignition-proof. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron. Filter is located downstream of the motor. Manual Filter Shaker (MFS) system.

Stainless steel recovery tank (SAE 304). Easy one-click detaching and connecting of tank. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart and tool basket. Dynabrade recommends the use of Mineral Oil with viscosity of 10.5 cSt. 96608 Conductive Cleaning Kit available separately

DY 61472

1.5 Gal. (6 L), Division 1, Stainless Steel, Conductive, N. America

Pneumatic Portable Vacuum For use on metallic surfaces such as aluminum, magnesium, titanium, commercial alloys. Collects maximum of 5 lbs. (2.27 kg) of dust. Designed for dry-only source capture, where fine dust must be recovered. Legally certified as explosion-proof and dust ignition-proof. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron.

Stainless steel recovery tank (SAE 304). Easy recovery bag access. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with ergonomic Back-Pack Harness Conductive Cleaning Kit available separately

DY 61518

DY 61479

DY 61562

DY 61564

DY 61565

DY 62414

DY 62415

3.50in I.D. x 6.00in O.D. x 3in H

DY 62585

2.625in I.D. x 6.375in O.D. x 4.375in H

DY 62635

5 Pack

DY 62638

PKG of 5

DY 62640

3.375in I.D. x 6.00in O.D. x 3.75in H

DY 62647

PKG of 3

DY 62668

DY 62677

DY 62787

Qty. 3 per package

DY 62831

DY 64000

DY 64201

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 33in (84 cm) W x 41in (104 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes two filters.

• HP: 1.0

DY 64256

DY 64400

230 V (AC), 3 Phase, 60 Hz, Down Exhaust

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 64654

460 V, 60 Hz, Three Phase, 1.5 hp, 2 Motors

DY 64657

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 48in (122 cm) W x 96in (244 cm) L

Up to 70% more filter area than competitive brands. Dual filtration. pre-filter blanket and 1-micron paper filters. Includes twelve paper filters. Eight 64658 filters: 20in (508 mm) x 25in (635 mm). Four 64659 filters:16in (406 mm) x 25in (635 mm)

DY 64665

DY 64671

DY 64672

DY 64682

(10 pack)

DY 64699

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 33in (84 cm) W x 60in (152 cm) L

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes two filters.

• HP: 1.0

DY 64985

DY 64969

DY 66740

DY 66700

DY 66705

DY 67500

DY 69273

DY 69362

DY 69481

DY 76020

DY 78015

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78019

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78020

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78021

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78045

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78046

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78049

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78050

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78051

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78052

Used for a wide range of applications including decorative finishing, surface conditioning and blending on a variety of metals. Tough reinforced nylon and abrasive belts allow controlled cut to eliminate gouging, run cool and leave burr free finishes.

DynaBrite belts are made of a non-woven nylon which is impregnated with abrasive grain and resin, perfect for: Light and heavy duty cleaning, Deburring, Blending, Polishing and Finishing.

DY 78098

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78102

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78108

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78109

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78110

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78123

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78127

The most consistent cutting and finishing surface conditioning product

Provides the higher cut rate of a coaser grit while generating the finish of finer grits

DY 78128

The most consistent cutting and finishing surface conditioning product

Provides the higher cut rate of a coaser grit while generating the finish of finer grits

DY 78129

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 78158

Unit = 1 sheet (25/sheet)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

For spot repair on primed and painted surfaces to remove dust nibs and small paint runs

DY 78197

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78198

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78199

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78325

Dynabrite interleaf spindle mount flap wheels and wheels are an ideal choice for a broad range blending and finishing applications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

DY 78328

Dynabrite interleaf spindle mount flap wheels and wheels are an ideal choice for a broad range blending and finishing applications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

DY 78804

Include 00001721 Safety Sheet For Each

Knot construction provides aggressive, high-impact action for heavy duty applications. Slight tuft at the end of the wire knot provides some flexibility for irregular surfaces.

Remove rust, scale, weld spatter and oxidation.

• Max. RPM: 20000.0

DY 78819

Include 00001721 Safety Sheet For Each

Knot construction provides aggressive, high-impact action for heavy duty applications. Slight tuft at the end of the wire knot provides some flexibility for irregular surfaces.

Heavy duty cleaning of large metal surfaces.

DY 78823

Include 00001721 Safety Sheet For Each

Knot construction provides aggressive, high-impact action for heavy duty applications. Slight tuft at the end of the wire knot provides some flexibility for irregular surfaces.

Heavy duty cleaning of large metal surfaces.

DY 79006

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79011

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79015

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79019

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79024

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79025

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79040

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79054

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79059

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79126

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79148

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79153

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79154

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79155

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79241

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79242

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79243

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79247

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79333

1 PK contains 25 discs

Micro-fracturing, high performance ceramic alumina grain continuously exposes sharp cutting edges extending product life

Self lubricating grinding aid reduces heat buildup while minimizing glazing and loading on stainless steel, titanium and other high nickel based alloys

DY 79356

Includes Safety Sheet 00000669 ( )

Used for a variety of applications, such as cutting sheet metal, pipe, drill bits, steel bar, tubing and metallurgical sectioning

Utilized in foundry/forge shops for gate/riser removal

• Max. RPM: 25400.0

DY 79360

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

DY 79362

The most common mineral for general purpose applications. Ideal for sanding on bare wood, metal, plastic and fiberglass. Also used to prepare primed and painted surfaces for finishing.

Film substrate is durable and ideal for wet applications.

DY 79388

Includes Safety Sheet 00000669 ( )

Used for a variety of applications, such as cutting sheet metal, pipe, drill bits, steel bar, tubing and metallurgical sectioning.

Utilized in foundry/forge shops for gate/riser removal

• Max. RPM: 19100.0

DY 79403

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79404

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79405

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79406

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79407

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

DY 79470

60 Grit Coarse, 3/4in (19 mm) Arbor Hole

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 79471

80 Grit Medium, 3/4in (19 mm) Arbor Hole

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 79473

150 Grit Fine, 3/4in (19 mm) Arbor Hole

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 79472

120 Grit Medium, 3/4in (19 mm) Arbor Hole

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0