DYNABRADE INC. S12699

DY NS11

0-2,800 RPM, 1 hp, 3/4in (19 mm) Diameter Orbit

The Dynabrade Nitro Series&trade. 11in Diameter Random Orbital Sander will give the user the professional results they desire. This powerful tool with proportionate 3/4in diameter orbit assures a swirl-free finish on a variety of surfaces. Additionally, it is perfect to quickly remove heavy oxidation and correct surface imperfections on large areas.

Powerful 1 hp, 2,800 RPM motor offers high torque and power, 43% higher hp than previous model. The sander weight/balance allows the operator to let the tool do the work on large horizontal surfaces. Soft grip insulated handle reduces cold air transmission to the operator.

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2,800

DY NZ1

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. The NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1 includes Standard Tool, 92239 3/4in Wheel Hub Assembly and 92255 RED-TRED®. Zip Eraser Wheel. Accessories sold separately: 92252 1/2in Wheel Hub Assembly, 92248 1/2in Coarse Wire Wheel, 92245 3/4in Coarse Wire Wheel.

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

• HP: 0.5
• Max. RPM: 3500.0
• Motor RPM: 20,000

DY 96539

DY 98220

DY 96627

DY 96624

DY RB3

800 - 3,000 RPM, 110 V, 1000 Watt, 5/8in -11 Spindle Thread

Powerful 1000-watt motor is well suited detail applications

Well balanced, right angle tool configuration provides easy operator control Thumb controlled variable speed dial offers six speed selection options between 800 - 3000 RPM

DY 96776

DY 96425

DY 96569

by the foot

Allows 30% more airflow to the tool than previous 8mm offering and 10% more airflow to the tool than previous 10mm offering.

Previous 8mm and 10mm offering could experience occurrences of off-gassing. This occurs when air bypasses or bursts through an internal hose lining, creating a bubble on the outer skin - a potential bursting safety hazard.

DY 98288

DY 98265

-- ONLY USE DYNABRADE COUPLERS WITH DYNABRADE PLUGS

DY 97530

DY 96538

DY 97441

DY 97311

DY 97995

DY NZ1K

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. When equipped with an eraser wheel the NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1K INCLUDES: NZ1 Standard Tool, 92252 1/2in Wheel Hub Assembly (1), 92248 1/2in Coarse Wire Wheel (1), 92239 3/4in Wheel Hub Assembly (1), 92245 3/4in Coarse Wire Wheel (1), 92255 RED-TRED®. Zip Eraser Wheel (1)

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

DY 96602

DY RS1

Straight Line, 3/8in Stroke Length, 9,000 SPM

The perfect tool for cutting materials such as plastics, fiberglass, composites, aluminum and sheet metal

Small, lightweight design provides greater accessibility and increases operator productivity

DY 97022

DY ROB1

1,800-4,400 RPM, 110V, 1000 Watt, 5/16in -24 Female Thread, 21 mm Orbit

Powerful 1000-watt motor is well suited detail applications Well balanced, right angle tool configuration provides easy operator control

Thumb controlled variable speed dial offers six speed selection options between 1,800 - 4,400 RPM Front grip cover, adjustable/removable D handle and ergonomic throttle handle design offer multiple grip positions during use

• Motor RPM: 4,200

DY X31

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000

DY X3151H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161V

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X31V

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000

DY X32

DY X3252V

12,000 RPM, 3/32in (2.4 mm) Diameter, Rear Exhaust

DY X3262V

12,000 RPM, 3/32in (2.4 mm) Diameter, Rear Exhaust

DY X51

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, PSA

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X51HS

0.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face w/Speed Regulator

Added speed control to adjust the flow of air and RPM of the tool.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X51V

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X51VHS

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face w/Speed Regulator

Added speed control to adjust the flow of air and RPM of the tool.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X52

.3 hp, 12,000 RPM, 3/32in (2.5 mm) Diameter Orbit, Rear Exhaust, PSA

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X52V

.3 hp, 12,000 RPM, 3/32in (2.5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X51H

0.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X52H

0.3 hp, 12,000 RPM, 3/32in (2.5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X61

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, PSA

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X61HS

0.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face w/Speed Regulator

Added speed control to adjust the flow of air and RPM of the tool.

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

• HP: 0.3
• Motor RPM: 12,000

DY X61V

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY X62V

.3 hp, 12,000 RPM, 3/32in (2.5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

Highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000