DYNABRADE INC. S12699

DY 59332

DY 59333

DY 59340

DY 59342

DY 61506

DY 62449

DY 63210

460 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 64251

DY 64651

DY 64684

DY 64685

DY 64700

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 78025

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78026

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78030

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78034

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78157

Unit = 1 sheet (25/sheet)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

For spot repair on primed and painted surfaces to remove dust nibs and small paint runs

DY 78167

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

DY 78168

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

DY 78377

Thick, strong synthetic fibers and coarse abrasive with a smear-resistant adhesive for quick and easy cleaning and conditioning.

Clean welds, removal of paint/coatings, scale and oxidation.

DY 78381

The best choice for rough cleaning and stripping of coatings, oxidation, weld slag and rust without damanging the underlying surface

The abrasive is dispersed and coated thoughout the entire disc providing a constant and consistent cut rate

DY 78415

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 79050

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79051

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79053

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79058

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79061

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79062

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79063

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79123

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79143

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79147

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79201

(5) 79031, (5) 79032 Z/A Belts and (1) 78020 NWN Belt

Dynabrade's Abrasive Belt Assortment Pak includes: 5-60 Grit DynaCut Zirconia Alumina Coated Belts, 5-80 Grit DynaCut Zirconia Alumina Coated Belts and 1-Medium Surface Conditioning (Non-Woven Nylon) Belt.

DynaCut Zirconia Alumina Coated Abrasive Belts are ideal for metalworking, finishing on stainless steel, nickel alloy, forged steel and aluminum.

DY 79230

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79240

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79948

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79949

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79962

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79964

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79965

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79970

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79971

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79973

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 80015

DY 80021

DY 89301

DY 89314

DY 89317

DY 89318

DY 89324

DY 91123

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91125

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91301

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 91302

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 91428

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 93347

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

DY 93348

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

DY 93350

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

DY 93562

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93563

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93564

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93568

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93569

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93583

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 93590

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

DY 52538

.4 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.

3in Diameter, Right Angle, .4 hp, 12,000 RPM, Rear Exhaust. Ideal for use with optional 3in diameter Diamond Cut-Off Wheels.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 52631

1.3 hp, 12,000 RPM, Rotational Exhaust, 3/8in -24 Spindle Thread

Includes 50192 locking-type Backing Pad, 4in (102 mm) in diameter

Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.

• HP: 1.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 52597

1.3 hp, 6,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

7in Diameter, 1.3 hp, Right Angle Disc Sander with unique Vacuum Shroud captures most contaminants. This Central Vacuum Model (52597) runs free at 6,000 RPM and has a 5/8in -11 Male Spindle Thread. 1-1/4in diameter Swivel Cuff (96004) improves maneuverability. Tool includes Vibration Dampening Side Handle (53134) for left or right hand use.

Vacuum Shroud captures airborne contaminants such as Hexavalent Chromium. An essential tool for nuclear plants, aerospace, wind energy, and marine markets. For use on non-ferrous surfaces such as Carbon Fiber, Composites, Fiberglass, Turbine Blades, more.

• HP: 1.3
• Max. RPM: 6000.0
• Motor RPM: 6,000

DY 53249

3 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8in -11 Spindle Thread

Ideal for heavy-duty applications in foundries and shipyards. Fast stock, rust and scale removal.

Governor-controlled air motor maintains tool RPM under heavy load. Over-speed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less down-time.

• HP: 3.0
• Max. RPM: 6000.0
• Motor RPM: 6,000

DY 53281

2.8 hp, 8,500 RPM, 5/8in -11 Spindle Thread

Rebel 2.8 hp series grinders and sanders are powerful tools designed to overcome the challenges of heavy-duty industrial applications

Durability has been elevated to a new level. with 1,000+ hours of use between recommended maintenance, the Rebel 2.8 hp is a tool to depend upon

• HP: 2.8
• Max. RPM: 8500.0
• Motor RPM: 8,500

DY 53409

DY 53450

DY 53451

DY 53531

1 hp, Straight-Line, 18,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Includes 3/8in -24 Male Threaded Adapter (53610)

Extension Grinders allow operator to extend into work pieces and reach lengthy distances.

• HP: 1.0
• Max. RPM: 18000.0
• Motor RPM: 18,000

DY 53547

DY 53569

DY 53609

DY 53610

DY 53627

DY 53628

DY 53690

DY 53697

DY 53783

.7 hp, Straight-Line, 20,000 RPM, Gearless, Rear Exhaust, 3/8in -24 Male Spindle Thread

Tool feature's steel housing for increased durability. Used in Steel Fabrication, Welding Operations, Shipyards, Foundries and more!

Dynabrade?s Steel Housing Die Grinders feature the quality and power you have come to expect.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 53878

DY 53892

DY 53965

DY 54029

DY 54035

DY 54037

The premium engineered vinyl face is designed to deliver for uniform support to PSA abrasive discs

This pad enhances the versatility of your Dynabrade Mini-Orbital Sander.

DY 54290

DY 54334

DY 54340

3/8in (10 mm) Thickness Urethane, Medium Density, 5/16in -24 Male Thread

Hole and channel configuration allow for smaller shroud covers to ensure all Vacuum Random Orbital Sanders are compatible

Hidden 1/8" (3 mm) deep recessed channel under acrylic label draws dust to the center, allowing maximum suction

• Max. RPM: 12000

DY 54406

.7 hp, 12,000 RPM, Composite, Geared, Rear Exhaust, Locking-Type Female Pad

Ideal for quick weld removal, metal beveling in weld preparation, deburring and deflashing, surface conditioning, paint removal and polishing!

Thermal-insulated handle reduces cold air transmission to operator.

• HP: 0.7
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 54468

DY 54519

DY 54529

DY 54536

DY 54540

DY 54541

DY 54544