DYNABRADE INC. S12699

DY 52924

DY 53183

DY 53207

DY 53278

DY 53570

DY 53600

DY 53603

DY 53608

DY 53606

DY 53611

DY 53635

DY 53637

DY 53639

DY 53649

DY 53666

DY 55021

DY 56022

DY 56474

DY 57371

DY 57429

DY 57962

DY 58013

DY 58022

The premium self skinning urethane foam provide optimum support and flexibility for the widest range of sanding applications with coarse to ultra fine grit abrasives.

3/8in (10 mm) thick, medium density pads. Pads mount with four screws.

DY 58358

DY 59371

DY 61169

DY 61430

10 Gal. (38 L), 20 A, 120 V/60 Hz, Division II, N. America

Electric Portable Vacuum for use on non-metallic surfaces such as wood and plastics. Designed for general source capture and cleanup. Powerful suction is ideal for dry-only industrial applications. Bypass Motor System uses clean air to cool the motor and extend vacuum life. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron. Two additional HEPA Filters included within power-head, making it eligible for IP6X.

Top-quality stainless steel body and 10 gallon (38 liter) recovery tank. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart. Also connects to optional 61483 Cart. Dust Ignition Protected

• HP: 1200.0

DY 61621

DY 62342

DY 62778

TV 212232SD

DY 64210

230 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 64209

230 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 33in (84 cm) W x 60in (152 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes two filters.

• HP: 1.0

DY 64401

460 V (AC), 3 Phase, 60 Hz, Down Exhaust

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 64403

460 V (AC), 3 Phase, 60 Hz, Up Exhaust

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 64855

DY 66710

DY 66435

DY 69482

DY 69483

DY 78103

A premium ceramic high performance mineral that is sharp, hard and tough.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

DY 78192

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78193

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78416

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78687

DY 79030

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79038

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79039

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79041

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79104

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79195

Self-sharpening design lasts 50% to 200% longer than other belts. For light to heavier grinding applications,

The durable Ywt. polyester backing provides excellent body retention during use for more consistent grinding action resulting in greater productivity.

DY 79231

DY 79252

100 disc per roll

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79254

100 disc per roll

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79256

100 disc per roll

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79311

1 pk contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 13000.0
• Motor RPM: 13,000

DY 79313

1 PK contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 13000.0

DY 79315

1 PK contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 12000.0

DY 79316

1 PK contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 12000.0

DY 79319

1 PK contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 6000.0

DY 79330

1 PK contains 25 discs

For general material removal, grinding and blending welds, heavy deburring and finishing

• Max. RPM: 6000.0

DY 79390

Includes Safety Sheet 00000669 ( )

Resin bonded blend of zirconia alumina and aluminum oxide

provides 2 to 3 times the life of aluminum oxide wheels

• Max. RPM: 13500.0

DY 79448

20/Box

High quality non woven fiber, resin and aluminum oxide abrasive are combined to forma flexible, conformable abrasive that produces a consistent finish on any workpiece

provides consistent micro scratch finishes on metal, wood, plastics, composites and coatings

DY 79477

80 Grit Medium, 5/8in -11 Female Thread

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 79478

120 Grit Medium, 5/8in -11 Female Thread

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 79508

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

DY 79509

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

DY 79818

50 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79819

50 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79820

50 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79821

50 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79826

Cut-off Wheel

A special contaminant free resin bond formulation and high quality aluminum Oxide grain design makes ideal for cutting stainless steel and other ferrous metals

provides consistent performance at a competitive [price

• Max. RPM: 13580.0
• Motor RPM: 13,500

DY 79851

50 ct. PK

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79907

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79908

DY 79910

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79931

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79933

DY 79954

DY 82575

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 82578

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 82579

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 89331

DY 90410

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90411

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90433

High performance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 90927

DynaCut Zirconia Alumina flap discs are manufactured with a ZA grain that is sharp, hard and tough. It works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.

DY 91457

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 91458

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 91460

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 91545

Extreme Orange Premium Film Disc, 1pk = 50pcs

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 91548

Extreme Orange Premium Film Disc, 1pk = 50pcs

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 79059

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79126

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79148

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79153

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79154

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79155

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79241

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79242

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79243

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible