Airpower | DYNABRADE INC. S12699 branded products

DY 11288

Wheel Repair Kit

$305.83

DY 51472R

Repair Auto Sander / Polisher

$806.06

DY 52296

Repair Collar

$169.86

DY 57098

Dynorbital Full Service Repair Kit

$529.27

Repair Collar Assembly, 1.584 Id

DY 96208

Repair-Collar Assembly, 1.584in ID

$56.74

DY 96461

Repair Collar

$146.79

DY 96510

Tune-Up Kit

$158.38

DY 96600

Rotor Clamp, Repair Fixture

$117.00

DY 01476

Cylinder

$147.54

DY 01953

Lever

$35.13

DY 11206

Contact Arm Assembly, 3/4in Diameter x 5/8in W, Rubber Wheel, with 3/4in (19 mm) W Platen

For 5/8in (16 mm) W or 3/4in (19 mm) W x 18in (457 mm) L Belts

Standard on models 15400, 40320, 40330, and 40381. accepts 5/8in or 3/4in x 18in belts.

$84.85

DY 12132

$2.07

DY 15312

Guard Assembly

$52.09

DY 45263

Safety Throttle Lever

$36.44

DY 56027

Muffler Element

$2.07

DY 56047

Rotor Key

$9.90

DY 56052

Balancer Bearing

$38.19

DY 57114

Blades (Set Of 5)

$22.99

DY 69272

Muffler Assembly

$8.72

DY 94300

1/4in NPT Composite Dynaswivel

Swivels 360 degrees at two pivot points allowing the air hose to drop directly to the floor.

$23.61

DY 95218

Knob

$11.65

DY 78381

6in Diameter x 1/2 W x 1/2in CH Extra Coarse DynaStrip Red Wheel with Hole

The best choice for rough cleaning and stripping of coatings, oxidation, weld slag and rust without damanging the underlying surface

The abrasive is dispersed and coated thoughout the entire disc providing a constant and consistent cut rate

$20.41

Condition Disc, Non Woven, Sold as each, 10 per Pk

DY 78415

5in (127 mm) Diameter x Medium Hook Non-Vacuum DynaBrite NWN Surface Conditioning Disc

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$7.30

Dyna Cut Belt, 40 Grit, 3 In x 24 In.

DY 79050

3in (76 mm) W x 24in (610 mm) L 40 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$8.40

Dyna Cut Belt, 60 Grit, 3 In x 24 In.

DY 79051

3in (76 mm) W x 24in (610 mm) L 60 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$7.63

Dyna Cut Belt, 120 Grit, 3 In x 24 In.

DY 79053

3in (76 mm) W x 24in (610 mm) L 120 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$7.63

1/4 X 24 Inch 80 Grit

DY 79058

1/4in (6 mm) W x 24in (610 mm) L 80 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.85

1/2 In x 24 In Long, 60 Grit A/Z Belt

DY 79061

1/2in (13 mm) W x 24in (610 mm) L 60 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.57

Sanding Belt, 80 Grit, 1/2 x 24 In.

DY 79062

1/2in (13 mm) W x 24in (610 mm) L 80 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.79

Sanding Belt, 120 Grit, 1/2 x 24 In.

DY 79063

1/2in (13 mm) W x 24in (610 mm) L 120 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.79

1/2 (13 mm) W x 18 (457 mm) L 60 Grit

DY 79123

1/2in (13 mm) W x 18in (457 mm) L 60 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$2.63

Sanding Belt, 80 grit, 1/8 x 24

DY 79143

1/8in (3 mm) W x 24in (610 mm) L 80 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$2.34

DynaCut Ceramic Belt, 40 grit, 1/2 x 24

DY 79147

1/2in (13 mm) W x 24in (610 mm) L 40 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$4.31

Assorted Pack Sandpaper

DY 79201

1/2in (13 mm) W x 18in (457 mm) L Belt Assortment Pak

(5) 79031, (5) 79032 Z/A Belts and (1) 78020 NWN Belt

Dynabrade's Abrasive Belt Assortment Pak includes: 5-60 Grit DynaCut Zirconia Alumina Coated Belts, 5-80 Grit DynaCut Zirconia Alumina Coated Belts and 1-Medium Surface Conditioning (Non-Woven Nylon) Belt.

DynaCut Zirconia Alumina Coated Abrasive Belts are ideal for metalworking, finishing on stainless steel, nickel alloy, forged steel and aluminum.

$31.58

Sanding Discs, 3 1/2in, 80 Grit

DY 79230

3-1/2in (89 mm) Diameter x 80 Grit A/O Non-Vacuum PSA DynaCut Disc

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$40.98

80 Grit PSA Roll Non Vac

DY 79240

5in (127 mm) Diameter x 80 Grit A/O Non-Vacuum PSA DynaCut Disc

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$40.98

Sanding Disk, 5in, Hook and Loop, Vac

DY 79948

5in (127 mm) Diameter x 180 Grit A/O Vacuum Hook-Face DynaCut Disc

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$54.69

5 In Sanding Disc, 220 Grit

DY 79949

5in (127 mm) Diameter x 220 Grit A/O Vacuum Hook-Face DynaCut Disc

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$54.69

5 Inch, 120 Grit A/O, Hook-Face

DY 79962

5in (127 mm) Diameter x 120 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

5 Inch, 180 Grit A/O, Hook-Face

DY 79964

5in (127 mm) Diameter x 180 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

5in Dia., 220 Grit, Hook-Face Disc

DY 79965

5in (127 mm) Diameter x 220 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

6 Inch, 80 Grit A/O, Hook-Face

DY 79970

6in (152 mm) Diameter x 80 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

6 Inch, 120 Grit A/O, Hook-Face

DY 79971

6in (152 mm) Diameter x 120 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.16

6 Inch, 180 Grit A/O, Hook-Face

DY 79973

6in (152 mm) Diameter x 180 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.16

Foot Switch and Hose Assy

DY 80015

Foot Switch and Hose Assy

$346.42

Dynamount Bench Mount/80017

DY 80021

Dynamount Bench Mount/80017

$291.18

Bearing Box

DY 89301

Bearing Box

$0.00

Gear Box Housing

DY 89314

Gear Box Housing

$51.26

Nut

DY 89317

Nut

$0.00

Spiral Bevel Pinion

DY 89318

Spiral Bevel Pinion

$0.00

Ball Bearing

DY 89324

Ball Bearing

$15.86

Belt, Abrasive, 3/4in x 18in, 60 Grit

DY 91123

3/4in (19 mm) W x 18in (457 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.45

120 Grit Aluminum Oxide Belt

DY 91125

3/4in (19 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.45

11-1/4in x 120 Grit Non-Vac Hook-Face

DY 91301

11-1/4in (286 mm) Diameter x 120 Grit A/O Non-Vacuum Hook-Face DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$8.16

11-1/4in x 180 Grit Non-Vac Hook-Face

DY 91302

11-1/4in (286 mm) Diameter x 180 Grit A/O Non-Vacuum Hook-Face DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$8.16

1/2in x12in, 60 Grit A/O Dynacut Belt

DY 91428

1/2in (13 mm) W x 12in (305 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.29

Carbide Burr, 1/8 In. (3mm) Dia., SL-42

DY 93347

Carbide Burr, 1/8in (3 mm) Diameter, SL-42 D/C Burr, Taper-Radiused End, 1/2in Flute L, 1/8in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$16.97

Carbide Burr, 1/8 In. (3mm) Dia., SM-42

DY 93348

Carbide Burr, 1/8in (3 mm) Diameter, SM-42 D/C Burr, 14 Degree Cone, 7/16in Flute L, 1/8in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$16.97

Rotory Fille Kit, Carbide

DY 93350

Carbide Burr 8-Piece Burr Kit, 1/4in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$333.04

Eyelet Star 3in 220 Grit

DY 93562

3in (76 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

Eyelet Star 320Grit

DY 93563

3in (76 mm) Diameter 320 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

Eyelet Star 400Grit

DY 93564

3in (76 mm) Diameter 400 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

4 (102 mm) Dia. 180 Grit A/O Eyelet San

DY 93568

4in (102 mm) Diameter 180 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$28.98

4 (102 mm) Dia. 220 Grit A/O Eyelet San

DY 93569

4in (102 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$28.98

3/4 (19 mm) Dia. 220 Grit A/O Eyelet

DY 93583

3/4in (19 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$2.54

1 (25 mm) Dia. 220 Grit A/O Eyelet Sand

DY 93590

1in (25 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$3.15

Diamond Cut-Off Wheel, CH 40/50 Grit

DY 93650

5in (127 mm) Diameter x 3/4in (19 mm) CH 40/50 Grit Side Spoked Diamond Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$242.78

Side Spoked Diamond Cut-Off Wheel

DY 93907

3in (76 mm) Diameter Side Spoked Diamond Mounted Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$254.99

Triangle Abrasive Disc, 80 Grit , (50 Per Pack)

DY 93913

Triangular x 80 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Abrasive Disc, 120 Grit, (50 Per Pack)

DY 93914

Triangular x 120 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Abrasive Disc, 180 Grit

DY 93916

Triangular x 180 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

5 Inch Diamond Cut Off Wheel

DY 93921

5in (127 mm) Diameter x 3/4in (19 mm) CH 40/50 Grit Continuous Rim Diamond Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$214.23

Triangle Abrasive Disc, 220 Grit

DY 93927

Triangular x 220 Grit A/O Hook-Face Non-Vacuum DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Sand Disk, Hook and Loop

DY 93928

Triangular x 320 Grit A/O Hook-Face Non-Vacuum DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Finger Sand Paper

DY 93940

3/8in (10 mm) W x 2in (51 mm) L 120 Grit A/O DynaCut Strip

20 Pack

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$5.96

Finger Sand Paper

DY 93941

3/8in (10 mm) W x 2in (51 mm) L 180 Grit A/O DynaCut Strip

20 Pack

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$5.96