DYNABRADE INC. S12699

DY 40367

DY 40326

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 1/4in -3/4in W x 20-1/2in L (6-19 mm x 521 mm) Belts

Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad. finish and polish using slack of belt.

Lightweight, ergonomic 7 degree offset design. Grinding head pivots 360 degrees for securing in most efficient position.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40610

10,500 RPM, 120 V (AC), 7 Amp, 60 Hz, for 1/8in -3/4in W x 18-34in L (3-19 mm x 457-864 mm) Belts

Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, fiberglass, solid surface, stone, glass etc.

Grind with contact wheel or platen pad. Finish and polish using slack of belt. Tool accepts over 20 interchangeable contact arms, for use with belts 1/4in to 3/4in wide by 18in long. Can accept 1/8in wide or 24in long belts with purchase of additional contact arms (not included).

• HP: 1.0
• Max. RPM: 10500.0

DY 40360

DY 40759

DY 31934

DY 31909

DY 31993

DY 40760

DY 31926

DY 40782

DY 40792

DY 40793

DY 40795

DY 43500

25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 43505

25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 43510

25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 6in (152 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 45214

DY 43515

25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 45215

DY 45293

DY 46001

DY 46000

12,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 46002

20,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 47201

3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 47800

12,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 47802

20,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 47801

15,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 47820

.4 hp, 12,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 47822

.4 hp, 20,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 47821

.4 hp, 15,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 48205

25,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 48201

25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 48315

12,000 RPM, Spiral-Geared, Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 48316

15,000 RPM, Spiral-Geared, Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 48317

20,000 RPM, Spiral-Geared, Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48325

25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Standard Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 48335

25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets

One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 48337

30,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets

Includes both 1/4in and 6mm collet inserts.

• HP: 0.4
• Max. RPM: 30000.0
• Motor RPM: 30,000

DY 48355

35,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 35000.0
• Motor RPM: 35,000

DY 48360

20,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Standard Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48365

20,000 RPM, Gearless, Rear Exhaust, 1/8in and 3 mm Collets, Standard Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48503

.4 hp, 25,000 RPM, Gearless, Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter).

Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced maintenance and down-time.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 48520

.4 hp, 12,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter).

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 48521

.4 hp, 15,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter).

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 48522

.4 hp, 20,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51348 Locking-Type Pad (2in diameter).

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48531

.4 hp, 15,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51346 Locking-Type Pad (3in diameter).

Extended muffler design.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 48530

.4 hp, 12,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51346 Locking-Type Pad (3in diameter).

Extended muffler design.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 48532

.4 hp, 20,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51346 Locking-Type Pad (3in diameter).

Extended muffler design.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48540

.4 hp, 12,000 RPM, Geared, Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 48542

.4 hp, 20,000 RPM, Geared, Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48541

.4 hp, 15,000 RPM, Geared, Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 49400

.4 hp, 3,200 RPM, 3/16in (5 mm) Diameter Orbit

Built-in speed regulator, extended rear exhaust muffler, safety-lock lever included. Governor-controlled motor maintains speed under load.

Sample 9-micron micro-finishing film discs are included. Optional 54585 Side Handle Assembly available.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 49410

.4 hp, 3,200 RPM, Extended Rear Exhaust, 1/4in -20 Female Thread

Tool has 1/4in -28 female thread. Comes mounted with 54021 Adapter for pads with 1/4in -20 female thread.

Includes 50107 Pad (2in diameter) for PSA (adhesive backed) abrasive discs.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 49403

.4 HP, 3,200 RPM

Built-in speed regulator, extended rear exhaust muffler, safety-lock lever included. Governor-controlled motor maintains speed under load.

Sample 9-micron micro-finishing film discs are included. Optional 54585 Side Handle Assembly available.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 49420

3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in Collet

Includes 50055 Collet Assembly and extended rear exhaust muffler to reduce noise levels.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 49440

.4 hp, 3,200 RPM, Rear Exhaust, 1/4in -20 Male Adapter Thread

3in Diameter Buffer, for repair of sanding scratches on clearcoat.

.4 hp, 3in Diameter, 3,200 RPM. Tool comes mounted with 54021 Adapter (1/4in -20 male thread).

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 50090

DY 49445

.4 hp, 3,200 RPM

Governor-controlled motor maintains speed under load.

Ideal for repair of sanding scratches on clearcoat.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 49425

3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3,200

DY 50307

1.2 hp, 11,000 RPM, Gearless, Side Exhaust, 5/8in -11 Female Pad

Model Includes 51150 Disc Pad Assembly (5in diameter). Powerful air motor is governor-controlled to maintain RPM under heavy load.

Safety-lock throttle lever prevents accidental start-up. Side handle increases control and reduces hand fatigue.

• HP: 1.2
• Max. RPM: 11000.0
• Motor RPM: 11000

DY 50561

.4 hp, 15,000 RPM, Rear Exhaust, Locking-Type Disc, Standard Shroud

Powerful .4 hp (298 W) Air Motor for Smooth, Controlled Sanding. Unique Vacuum Shroud Diverts Dust and Debris to Vacuum Source. For Use With 3in (76 mm) Diameter Locking-Type Abrasive Discs

Dynabrade?s Vacuum Disc Sander powers 3in (76 mm) diameter Abrasive Discs, for efficient material removal on non-ferrous surfaces such as carbon fiber, fiberglass, painted aluminum and more. As tool is sanding, flexible Vacuum Shroud captures dust, debris and contaminants (including Hexavalent Chromium) to vacuum source - ensuring cleaner, safer workplace. This is an essential tool for aerospace, automotive, marine and transportation industries!

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 50630

DY 50350

1.2 hp, 6,000 RPM, Side Exhaust, 5/8in -11 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

7in Diameter, Right Angle, 1.2 hp, Side Exhaust, 6,000 RPM.

• HP: 1.2
• Max. RPM: 6000.0
• Motor RPM: 6000

DY 51136

DY 51149

Medium Density, Includes 3/8in -24 to 5/8in -11 Female Threaded Adapter

Thermoplastic pad accepts abrasive discs with 7/8in (22 mm) center hole.

Fins help expel heat from disc pad extending disc life.

DY 50225

Rear Exhaust, For 1/4in -20 Female Thread Type Pad, Sandpaper, Speed Regulator

Very low vibration reduces hand and arm fatigue providing ultimate results to sensitive workpieces or when sanding/repairing a coated surface.

Ultra-lightweight, at just 1 pound (.45 kg) with small ergonomic pistol grip design, the Mini Orbital Sander reduces the likelihood of repetitive motion injuries during extended use.

• HP: .02 (15)
• Max. RPM: 8500
• Motor RPM: 8,500

DY 51300

15,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 50349

1.2 hp, 6,000 RPM, Side Exhaust, 5/8in -11 Female Pad

Air motor is governor-controlled to maintain RPM under heavy load. Lubricated gears increase durability.

Side handle is reversible for left or right hand operation. Safety-lock throttle lever included.

• HP: 1.2
• Max. RPM: 6000.0
• Motor RPM: 6000

DY 50210

.4 hp, 15,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad, Trimmed Shroud

Powerful .4 hp (298 W) Air Motor for Smooth, Controlled Sanding. Unique Vacuum Shroud Diverts Dust and Debris to Vacuum Source. For Use With 3in (76 mm) Diameter Locking-Type Abrasive Discs

Dynabrade's Vacuum Disc Sander powers 3in (76 mm) diameter Abrasive Discs, for efficient material removal on non-ferrous surfaces such as carbon fiber, fiberglass, painted aluminum and more. As tool is sanding, flexible Vacuum Shroud captures dust, debris and contaminants (including Hexavalent Chromium) to vacuum source - ensuring cleaner, safer workplace. This is an essential tool for aerospace, automotive, marine and transportation industries!

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 15,000

DY 51302

20,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 51305

18,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 18000.0
• Motor RPM: 18000

DY 51303

24,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 24000.0
• Motor RPM: 24000

DY 50399

DY 50348

2 hp, 6,000 RPM, Side Exhaust, 5/8in -11 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

7in Diameter, Right Angle, 2 hp, Side Exhaust, 6,000 RPM.

• HP: 2.0
• Max. RPM: 6000.0
• Motor RPM: 6000

DY 50302

1 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

4in Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.

• HP: 1.0
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 50509

DY 51301

18,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 18000.0
• Motor RPM: 18000

DY 51304

15,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 51306

20,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 50340

.7 hp, 11,000 RPM, Rear Exhaust, 5/8in -11 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

4-1/2in - 5in Diameter, Pistol Grip, .7 hp, Rear Exhaust, 11,000 RPM.

• HP: 0.7
• Max. RPM: 11000.0
• Motor RPM: 11,000

DY 50435

DY 50321

.7 hp, 11,000 RPM, Gearless, Rear Exhaust, 5/8in -11 Female Pad

Model includes 50267 Disc Pad Assembly for slotted center-hole abrasive discs. Gearless motor for reduced maintenance and downtime.

Governor-controlled to maintain RPM under heavy load.

• HP: 0.7
• Max. RPM: 11000.0
• Motor RPM: 11000

DY 50306

DY 50268

DY 50283

Rubber, Medium Density, 5/8in -11 Female Thread

• Motor RPM: 8,500

DY 50659

DY 50324

.7 hp, 11,000 RPM, Gearless, Rear Exhaust, Locking-Type Female Pad

Includes 50192 Locking-Type Pad (4in diameter). pad mounts to tool spindle without adapters. Governor speed control maintains RPM under load.

Governor-controlled to maintain RPM under heavy load.

• HP: 0.7
• Max. RPM: 11000.0
• Motor RPM: 11,000

DY 50470

DY 51333

20,000 RPM, Gearless, Rear Exhaust, 1/4in Collet, Extended Muffler

Central Vacuum Router - 4in (102 mm) Diameter Base For Connection to Central Vacuum System. Unique vacuum shroud captures contaminants. Vacuum Router is ideal for chamfers and roundover cuts on hardwoods, softwoods, solid surfaces and plastics. Great for laminate trimming, surface planing, beveling and cornering.

Includes 1in (25 mm) vacuum port, for easy connection to external central vacuum system. Efficiently captures dust and debris as tool is run. Includes 08054 Insert, for enhanced source capture.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 50767

DY 50209

Includes: RB3, backing pad, 3 polishing pads, 2 liters of compound, microfiber wipes and a carry bag

Powerful 1000-watt motor is well suited detail applications

Well balanced, right angle tool configuration provides easy operator control Thumb controlled variable speed dial offers six speed selection options between 800 - 3000 RPM

DY 51307

24,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 24000.0
• Motor RPM: 24000

DY 50787

DY 51350

DY 51330

20,000 RPM, Front Exhaust, 3/8in -24 Spindle Thread

Ideal for chamfers and roundover cuts on hardwoods, softwoods, solid surfaces or plastics. Great for laminate trimming, surface planing, beveling and cornering.

Tool accepts optional high-speed steel router bits with 1/4in diameter shank capacity. Also accepts optional 1/8in collet insert, for mounting 1/8in diameter router bits.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 51393

1 hp, 4,500 RPM, Rear Exhaust, 5/8in -11 Spindle Thread

6in -8in Diameter Buffer, 1 hp. Ideal for use with optional 6in to 8in buffing accessories.

5/8in -11 Male Thread. 4,500 RPM. Highest quality air motor

• HP: 1.0
• Max. RPM: 4500.0
• Motor RPM: 4500

DY 51391

1 hp, 1,800 RPM, Rear Exhaust, 5/8in -11 Spindle Thread

6in -8in Diameter Buffer, 1 hp. Ideal for use with optional 6in to 8in buffing accessories.

5/8in -11 Male Thread. 1,800 RPM. Highest quality air motor

• HP: 1.0
• Max. RPM: 1800.0
• Motor RPM: 1800

DY 51392

1 hp, 2,800 RPM, Rear Exhaust, 5/8in -11 Spindle Thread

6in -8in Diameter Buffer, 1 hp. Ideal for use with optional 6in to 8in buffing accessories.

5/8in -11 Male Thread. 2,800 RPM. Highest quality air motor

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2800

DY 51400

.4 hp, 3,200 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

3in Diameter Buffer, 7 degree Offset, Rear Exhaust.

3,200 RPM. 7 Degree offset ergonomic design for control and comfort.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3200