Spray Guns - Manual

View as Grid List
Sort by
Display items per page
GG 2004182.jpg

STELLAIR GUN, HVLP (.055), WIDE PATTERN

GG 2004182

GG 2004182

STELLAIR GUN, HVLP (.055), WIDE PATTERN

Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Wide pattern air cap sprays consistent coverage over large surfaces.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
GG 2004183.jpg

STELLAIR GUN, HVLP (.070), WIDE PATTERN

GG 2004183

GG 2004183

STELLAIR GUN, HVLP (.070), WIDE PATTERN

Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), Wide Pattern, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Wide pattern air cap sprays consistent coverage over large surfaces.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
GG 2004184.jpg

STELLAIR GUN, COMP (.055), WIDE PATTERN

GG 2004184

GG 2004184

STELLAIR GUN, COMP (.055), WIDE PATTERN

Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results. Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood. Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
Wide pattern air cap sprays consistent coverage over large surfaces.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
GG 2004185.jpg

STELLAIR GUN, COMP (.070), WIDE PATTERN

GG 2004185

GG 2004185

STELLAIR GUN, COMP (.070), WIDE PATTERN

Stellair Air Spray Gun, Compliant, 0.070 in (1.8 mm), Wide Pattern, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
Wide pattern air cap sprays consistent coverage over large surfaces.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
GG 2006146.jpg

Stellair Air Spray Gun, HVLP, 0.086 In. (2.2 MM), PEEK Tip, General Industry

GG 2006146

GG 2006146

GUN, HVLP (.086)

Graco 2006146 Stellair Air Spray Gun, HVLP, 0.086 in (2.2 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.


Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
  • High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
  • General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
  • Swivel and hose move with you at any angle, preventing tripping and injury.
  • One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
$630.00
GG 2006152.jpg

Stellair Air Spray Gun, Conventional, 0.059 In. (1.5 MM), Carbide Tip, High Solids

GG 2006152

GG 2006152

GUN, CONVENTIONAL (.059) HIGH WEAR

Graco 2006152 Stellair Air Spray Gun, Conventional, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.


Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
  • Conventional is the traditional air spray method, producing Class A, automotive finish quality.
  • General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
  • Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
  • One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
  • Direct
$735.00
GG 2006153.jpg

Stellair Air Spray Gun, Compliant, 0.059 In. (1.5 MM), Carbide Tip, High Solids

GG 2006153

GG 2006153

GUN, COMPLIANT (.059) HIGH WEAR

Graco 2006153 Stellair Air Spray Gun, Compliant, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.


Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
  • Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
  • General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
  • Swivel and hose move with you at any angle, preventing tripping and injury.
  • Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
  • Direct stainless steel fluid path means lit
$893.00
GG 24F202.jpg

AIRPRO GUN, PRESSURE, CONV

GG 24F202

GG 24F202

AIRPRO GUN, PRESSURE, CONV

Graco 24F202 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, Air Brush Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Air Brush
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.11
  • Fluid Orifice Size (in): 0.042
  • Fluid Orifice Size (mm): 1.1
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 24J601.jpg

FINEX GUN, GRACO

GG 24J601

GG 24J601

FINEX GUN, GRACO

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun, conventional, 0.039 in (1.0 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels – ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

Application: Easily spray small spaces and corners with the Finex gravity feed gun with swivel cup
  • Aluminum cup is included with the gun
  • Cup swivels for spraying in small spaces
  • Light trigger pull for operator comfort
  • Integrated air inlet adjustment (cheater) valve


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Side-Cup Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.10
  • Fluid Orifice Size (in): 0.039
  • Fluid Orifice Size (mm): 1.0
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (kg): 0.54
  • Gun Weight (lb): 1.2
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$233.50
GG 26B505.jpg

PERFORMAA GUN, AA, 1500, LV, SWIVEL

GG 26B505

GG 26B505

PERFORMAA GUN, AA, 1500, LV, SWIVEL

Graco 26B505 PerformAA 1500 Air Assist Gun with Low Viscosity air cap, light trigger pull and fluid swivel

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

  • High quality 1500 psi air assist spray gun
  • Low viscosity air cap for even dispersion of light materials
  • Includes a low profile fluid swivel
  • Trigger pull force is ultra-light, reducing operator fatigue and muscle stress


  • Model: PerformAA 15
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Gender: Male
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
  • Compatible Spray Tip: AXM, AXF
  • Feed Type: Pressure Feed
  • Fluid Adjustment Knob: Clicking
  • Fluid Inlet Size (cm): 0.635
  • Fluid Inlet Size (in): 1/4
  • Fluid Inlet Size (mm): 6.35
  • Fluid Inlet Thread Gender: Male
  • Fluid Inlet Thread Type: NPSM
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Air-Assisted Gun
  • Gun Weight (g): 453
  • Gun Weight (kg): 0.45
  • Gun Weight (lb): 1
  • Gun Weight (oz): 16
  • Gun Weight with Tip and Guard (g): 480
  • Gun Weight with Tip and Guard (oz): 17.1
  • Gun Weight without Tip and Guard (g): 460
  • Gun Weight without Tip and Guard (oz): 16.2
  • Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 105
  • Maximum Fluid Pressure (kPa): 10500
  • Maximum Fluid Pressure (MPa): 10.5
  • Maximum Fluid Pressure (psi): 1500
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 110
  • Maximum Fluid Pressure (bar): 105
  • Maximum Fluid Pressure (kPa): 10500
  • Maximum Fluid Pressure (MPa): 10.5
  • Maximum Fluid Pressure (psi): 1500
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 110
  • Overall Height (cm): 20.8
  • Overall Height (in): 8.2
  • Overall Height (mm): 208
  • Overall Length (cm): 15.25
  • Overall Length (in): 6
  • Overall Length (mm): 152
  • Product Type: Spray Gun
$1,205.00
GG 288955.jpg

AIRPRO GUN, SST TIP, COMPLIANT, .042

GG 288955

GG 288955

AIRPRO GUN, SST TIP, COMPLIANT, .042

Graco 288955 AirPro Air Spray Pressure Feed Gun, Compliant, 0.042 inch (1.1 mm) Nozzle, SST Tip, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Metal
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.11
  • Fluid Orifice Size (in): 0.042
  • Fluid Orifice Size (mm): 1.1
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 288968.jpg

AIRPRO GUN, WB, HVLP, .042

GG 288968

GG 288968

AIRPRO GUN, WB, HVLP, .042

Graco 288968 AirPro Air Spray Pressure Feed Gun, HVLP, 0.042 inch (1.1 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Waterborne
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.11
  • Fluid Orifice Size (in): 0.042
  • Fluid Orifice Size (mm): 1.1
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 288976.jpg

AIRPRO GUN, CERAMIC, HVLP, .059

GG 288976

GG 288976

AIRPRO GUN, CERAMIC, HVLP, .059

Graco 288976 AirPro Air Spray Pressure Feed Gun, HVLP, 0.059 inch (1.5 mm) Nozzle, for High Wear Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: High Wear
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Ceramics, Enamel, High Solids, Metallics, Solvent borne, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.15
  • Fluid Orifice Size (in): 0.059
  • Fluid Orifice Size (mm): 1.5
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 289012.jpg

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

GG 289012

GG 289012

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 289256.jpg

FINEX GUN, 2, MINI, HVLP, .6

GG 289256

GG 289256

FINEX GUN, 2, MINI, HVLP, .6

Graco 289256 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.024 in (0.6 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Mini Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.06
  • Fluid Orifice Size (in): 0.024
  • Fluid Orifice Size (mm): 0.6
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.4
  • Gun Weight (lb): 0.9
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$252.00
GG 289993.jpg

AIRPRO GUN, SIPHON, HVLP, .055

GG 289993

GG 289993

AIRPRO GUN, SIPHON, HVLP, .055

Graco 289993 AirPro Air Spray Siphon Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, without Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Siphon Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$832.00
GG 289996.jpg

AIRPRO GUN, SIPHON, COMP, .070

GG 289996

GG 289996

AIRPRO GUN, SIPHON, COMP, .070

Graco 289996 AirPro Air Spray Siphon Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, without Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Siphon Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$832.00
GG HA2M10.jpg

PRO XP GUN, ES, AUTO BOTTOM, SMT, AA

GG HA2M10

GG HA2M10

PRO XP GUN, ES, AUTO BOTTOM, SMT, AA

Pro Xp Auto Air-Assist Electrostatic Spray Gun, smart model, with bottom manifold, 85 kV, includes AEM or AEF tip of choice Pro Xp Auto Air-Assist has an 85 kV power supply and internal power so there’s no electrical cord to damage or replace. Smart gun models connect to a control module for kV control and displaying gun performance. Ideal for high pressure spraying designed to improve transfer efficiency and deliver a high quality finish. Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting 85 kV power supply and internal power so there's no electrical cord to worry about damaging or replacing Higher transfer efficiency equals less waste, saving you money on material Durable components reduce cost of ownership, supported by a three year warranty
$16,900.00
GG L60M18.jpg

PRO XP GUN, ES, 60KV, SMART, WB

GG L60M18

GG L60M18

PRO XP GUN, ES, 60KV, SMART, WB

Pro Xp60 WB Air Spray Manual Electrostatic Gun, 60 kV, 0.055 in (1.5 mm) nozzle, smart display, for waterborne coatings Superior quality air spray consistently achieves high quality, Class A or decorative finishes with waterborne material. For spraying conductive, waterborne fluids with an isolation system Available in 60 kV, it’s the smallest profile gun with an internal power supply on the market. Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight applicator. Smart controls help you analyze performance, adapt voltage needs and troubleshoot easily. Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements. Made in the USA
$9,480.00
IW 3015.jpg

Gravity Spray Gun, W71-21G

IW 3015

IW 3015

Gravity Spray Gun, W71-21G
$308.32
IW 3040.jpg

Spray Gun

IW 3040

IW 3040

Spray Gun
$361.52
IW 3090.jpg

Siphon Spray Gun W77-3S

IW 3090

IW 3090

Siphon Spray Gun W77-3S
$343.78
IW 3100.jpg

W77-0N 1.2mm Spray Gun

IW 3100

IW 3100

W77-0N 1.2mm Spray Gun
$376.54
IW 3105.jpg

Spray Gun

IW 3105

IW 3105

Spray Gun
$376.54
IW 9234.jpg

Air Gunsa, AZ3HTE Gravity Spray Gun, 1.3

IW 9234

IW 9234

Air Gunsa, AZ3HTE Gravity Spray Gun, 1.3
$217.73
Refine
×
Manufacturer