INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
IQV20 HIGH-CAPACITY BATTERY STARTER KIT
IR BL2022C
IR BL2022C
IQV 20V 5Ah Lithium-Ion Battery and Charger Kit for Ingersoll Rand Power Tools
Features And Benefits- Kit Includes: 20V 5Ah Battery and 20V Single Port Charger.
- Battery includes 4-LED Fuel Gauge to monitor state of charge.
- Intelligent Battery Management System protects against over loading, over charging and over discharging for longer tool and battery life.
- Charger is wall-mountable and features audible chime when charging completed.
- Battery is compatible with all IQV20 series power tools and charger charges all IQV20™ batteries with 4A charge rate.
Includes: (1) 20V 5.0Ah Battery and (1) 20V Single Port Charger.
Product Application and Uses: For use with any Ingersoll Rand IQV® 20 Series cordless power tool.
Battery Capacity (Ah): 5
Battery Capacity (Wh): 100
Charge Time: 80 minutes
Color: Grey
Number of Battery Cells: 10
Power Source: Battery Powered
Voltage DC: 20
Warranty: 2-year
Battery Type: Tabbed
$290.00
BALANCER
IR BSD-70
IR BSD-70
Super Duty Spring Balancer, 132-154 lb Capacity, 8.2' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This “gravity-free” effect on all B Series models allows users to move tools with minimal effort along cable travel.Features And Benefits
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Visible cable for inspection
Cable Material: Stainless steel
Capacity (lb): 132 - 154
Color: Red
Duty Rating: Super Duty
Housing Material: Aluminum
Lift (ft): 8.2
Lock Mechanism: Ratchet
Lower Hook: Spring Loaded Safety Hook
Product Length (in): 8.7
Product Width (in): 12
Product Height (in): 27.6
Product Weight (lb): 59.1
Reel Height (in): 27.95
Reel Mount Type: Spring Loaded Safety Hook
Rotation Type: Swiveling
Warranty: 1-year
$3,450.00
Hoist, 275 Lb Capacity, Pendent Control, 13ft Lift, 10ft Drop, Fabric Container
IR CL125K-2C13-C10U
IR CL125K-2C13-C10U
Hoist, 275 Lb Capacity, Pendent Control, 13ft Lift, 10ft Drop, Fabric Container $3,645.00
Hoist, Air, 1/8 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall)
IR CL125K-2C0-C11
IR CL125K-2C0-C11
Hoist, Air, 1/8 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall) $3,150.09
CL125K-598 : CAPACITY LABEL - 1/8 T 125 KG HOOK
IR CL125K-598
IR CL125K-598
CL125K-598 : CAPACITY LABEL - 1/8 T 125 KG HOOK $17.00
Hoist, Air, 1/4 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall)
IR CL250K-2C0-C11
IR CL250K-2C0-C11
Hoist, Air, 1/4 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall) $3,445.74
1/4 Ton Air Hoist, 16 Ft Lift, 16 Ft Drop, Fabric Chain Container
IR CL250K-2C16-C16U
IR CL250K-2C16-C16U
1/4 Ton Air Hoist, 16 Ft Lift, 16 Ft Drop, Fabric Chain Container $4,009.50
Hoist, Air, 1/2 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall)
IR CL500K-2C0-C11
IR CL500K-2C0-C11
Hoist, Air, 1/2 Ton, Clk Series, Steel Hooks, 0' Lift, 11' Drop (1 Fall) $3,506.49
Valve, Alpha Series A212Ss-000-N
IR A212SS-000-N
IR A212SS-000-N
Valve, Alpha Series A212Ss-000-N $114.00
1/2 NPT Filter, Regulator, Lubricator Combo
IR C38341-810
IR C38341-810
1/2 NPT Filter, Regulator, Lubricator Combo $403.00
Inline Drill With 3300 rpm X No Chuck
IR DL051B-33-P
IR DL051B-33-P
Inline Drill With 3300 rpm X No Chuck $837.00
Oil
IR 50P
IR 50P
Premium Grade Air Tool Oil, SAE Grade 50W, 1 Pint
It goes without saying that proper lubrication of any tool is essential if you want the tool to last. By lubricating your air tools, you’ll prolong the life of tool motors, mechanisms, gearing, and other vital parts. Ingersoll Rand offers a complete line of specialized oils and greases that are engineered specifically for use with our air tools.Features And Benefits
- Proper lubrication of your air tools will prolong the life of tool motors, mechanisms, gearing and other vital parts.
Includes: 1 Pint of #50 oil
Product Application and Uses: For use with Ingersoll Rand Large Drills and Heavy Grinders
Product Length (in): 2
Product Width (in): 3.1
Product Height (in): 8
Product Weight (lb): 0.44
$20.00
AIR ANGLE GRINDER, 5 INCH, 5/8-11 ARBOR
IR 545MAX
IR 545MAX
Air Angle Grinder, 5" Type 27 Wheel, 12,000 RPM, 2.5 HP, 5/8"-11 Thread, Rear Exhaust
Take your productivity to the MAX with the 5445MAX and 545MAX Series 2.5 HP Air Angle Grinders from Ingersoll Rand®. Featuring a 2.5 hp motor that delivers the best power-to-weight ratio to maximize material removal, dramatically reducing job completion time on even the hardest alloys. At just over 4lbs, its compact construction is comfortable for all day use without operator fatigue. Durable, high strength internal components are built for long run times, reducing maintenance costs and operator downtime. An governed motor optimizes air consumption for the task at hand, delivering more power when you need it while increasing the life of abrasives and reducing consumable costs. A tool-free adjustable guard allows for orientation changes in seconds and spindle lock enables quick abrasive changeovers with a single spanner wrench. For colossal power in a compact size, keep your operators running with the 545MAX Series Angle Grinders.Features And Benefits
- Power: 2.5 hp motor delivers the best power-to-weight ratio to maximize material removal, dramatically reducing job completion time on even the hardest alloys.
- Performance: Governed motor optimizes air consumption for the task at hand, delivering more power when you need it while increasing the life of abrasives and reducing consumable costs.
- Productivity: No more excessive accessories. A tool-free adjustable guard allows for orientation changes in seconds and spindle lock enables quick abrasive changeovers with a single spanner wrench.
- Durability: Durable, high strength internal components are built for long run times, reducing maintenance costs and operator downtime.
- Comfort: At just over 4lbs, its compact construction packs a punch with a best-in-class power-to-weight ratio for all day use without operator fatigue.
Includes: Tool, 1 Wrench, Safety Manual, Auxiliary Handle, Allen wrench, Screw
Product Application and Uses: Designed for material removal using a rotated abrasive wheel for general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, construction, aerospace, and metal fabrication.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Free Speed (cfm): 32.33
Air Consumption @ Free Speed (l/min): 916
Air Consumption @ Load (cfm): 76.75
Air Consumption @ Load (l/min): 2174
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Average Air Consumption (cfm): 76.75
Average Air Consumption (l/min): 2174
Bearing Type: Ball Bearing
Bearing Type: Needle Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Configuration/Handle Type: Auxiliary Handle
Duty Rating: Industrial Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Gripping Length (in): 5.4
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 4.17
Housing Material: Aluminum core with composite sleeve
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Power Source: Air Powered
Product Length (in): 9.33
Product Height (in): 5.5
Product Weight (lb): 4.12
Rated Power (hp): 2.5
Rated Power (kW): 1.86
Side to Center Distance (in): 33.9
Side to Center Distance (mm): 861
Sound Pressure/Power Db(A): 95.1/106.1
Special Features: Tool free adjustable guard, spindle lock
Speed Setting: Variable Speed
Standards/Certifications: CE, UKCA
Vibration Level (m/s2): 8.38
Vibration Uncertainy K* (m/s2): 1.32
Warranty: 1-year
Wheel Diameter (in): 5
Wheel Thickness (in): 1/4
Wheel Type: Type 27
Similar IR
- M2A120RP105
- 345MAX
$775.00
SLB BOTTOM HOOK ASSEMBLY KIT, 3 TON
IR 45471315
IR 45471315
SLB BOTTOM HOOK ASSEMBLY KIT, 3 TON $144.00
VACUUM BODY ALTER TOP PORT TO 3/8 NPT ON 90157
IR 47601926001
IR 47601926001
VACUUM BODY ALTER TOP PORT TO 3/8 NPT ON 90157 $435.00
ZERO GRAVITY COMMAND HANDLE GEN 2, SNAP HOOK
IR 47805074001
IR 47805074001
ZERO GRAVITY COMMAND HANDLE GEN 2, SNAP HOOK $5,850.00
BOTTOM SHIPYARD HOOK ASSEMBLY KL 3T
IR 48492029
IR 48492029
BOTTOM SHIPYARD HOOK ASSEMBLY KL 3T $245.00
H THREAD ROD - 24" SHK 7/8" X 3-1/4" , QTY
IR 50283506
IR 50283506
24" H Thread Jackhammer/Rock Drill Rod Steel 7/8" x 3-1/4" Shank
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. All jackhammer rods are sold as single units (no required box quantities).Includes: All jackhammer rods are sold as single units (no required box quantities).
Product Application and Uses: For use with Ingersoll Rand JRD30-A, JRD50-A rock drills and JH40C1 jack hammers.
Collar Type: Round
Collar Width (in): 1.563
Housing Material: Steel
Length Under Collar (in): 24
Product Length (in): 27.25
Product Weight (lb): 5
Shank Length (in): 3.25
Shank SIze (in): 7/8 x 3-1/4
Shank Type: Hex
For Use With
- JH40C1
- JRD30-A
- JRD50-A
$211.00
700C Arm Rear Mast 150lb Balancer Top Mount, REF D2512519
IR 54137542
IR 54137542
700C Arm Rear Mast 150lb Balancer Top Mount, REF D2512519 $10,100.00
AIR ANGLE GRINDER, 4.5 INCH, 5/8-11 ARBOR
IR 5445MAX
IR 5445MAX
Air Angle Grinder, 4.5" Type 27 Wheel, 12,000 RPM, 2.5 HP, 5/8"-11 Thread, Rear Exhaust
Take your productivity to the MAX with the 5445MAX and 545MAX Series 2.5 HP Air Angle Grinders from Ingersoll Rand®. Featuring a 2.5 hp motor that delivers the best power-to-weight ratio to maximize material removal, dramatically reducing job completion time on even the hardest alloys. At just over 4lbs, its compact construction is comfortable for all day use without operator fatigue. Durable, high strength internal components are built for long run times, reducing maintenance costs and operator downtime. A governed motor optimizes air consumption for the task at hand, delivering more power when you need it while increasing the life of abrasives and reducing consumable costs. A tool-free adjustable guard allows for orientation changes in seconds and spindle lock enables quick abrasive changeovers with a single spanner wrench. For colossal power in a compact size, keep your operators running with the 545MAX Series Angle Grinders.Features And Benefits
- Power: 2.5 hp motor delivers the best power-to-weight ratio to maximize material removal, dramatically reducing job completion time on even the hardest alloys.
- Performance: Governed motor optimizes air consumption for the task at hand, delivering more power when you need it while increasing the life of abrasives and reducing consumable costs.
- Productivity: No more excessive accessories. A tool-free adjustable guard allows for orientation changes in seconds and spindle lock enables quick abrasive changeovers with a single spanner wrench.
- Durability: Durable, high strength internal components are built for long run times, reducing maintenance costs and operator downtime.
- Comfort: At just over 4lbs, its compact construction packs a punch with a best-in-class power-to-weight ratio for all day use without operator fatigue.
Includes: Tool, 1 Wrench, Safety Manual, Auxiliary Handle, Allen wrench, Screw
Product Application and Uses: Designed for material removal using a rotated abrasive wheel for general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, construction, aerospace, and metal fabrication.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Free Speed (cfm): 32.33
Air Consumption @ Free Speed (l/min): 916
Air Consumption @ Load (cfm): 76.75
Air Consumption @ Load (l/min): 2174
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Average Air Consumption (cfm): 76.75
Average Air Consumption (l/min): 2174
Bearing Type: Ball Bearing
Bearing Type: Needle Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Configuration/Handle Type: Auxiliary Handle
Duty Rating: Industrial Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Gripping Length (in): 5.4
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 4.17
Housing Material: Aluminum core with composite sleeve
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Power Source: Air Powered
Product Length (in): 9.33
Product Height (in): 5.5
Product Weight (lb): 4.1
Rated Power (hp): 2.5
Rated Power (kW): 1.86
Side to Center Distance (in): 33.9
Side to Center Distance (mm): 861
Sound Pressure/Power Db(A): 95.1/106.1
Special Features: Tool free adjustable guard, spindle lock
Speed Setting: Variable Speed
Standards/Certifications: CE, UKCA
Vibration Level (m/s2): 8.38
Vibration Uncertainy K* (m/s2): 1.32
Warranty: 1-year
Wheel Diameter (in): 4.5
Wheel Thickness (in): 1/4
Wheel Type: Type 27
Similar IR
- M2A120RP1045
- 3445MAX
$775.00
