Airpower | INGERSOLL-RAND IR TOOL S12880 branded products

IR 115-183

Spring Retainer for Ingersoll Rand Air Hammer

Product Application and Uses: For use with 114, 115, 116, 117, 118MAX, 122MAX Series Air Hammers

For Use With

115
116
117

$11.00

IR 115-2

Valve for Ingersoll Rand 115, 116, 117 Series Air Hammer

$15.00

IR 115-3

Seat for Ingersoll Rand 115, 116, 117 Series Air Hammer

$15.00

IR 115-4

Cap Replacement Part for Ingersoll Rand 115, 116, 117 Series Air Hammer

$15.00

IR 115-4T

Grease for Ingersoll Rand Impact Wrench, 4 oz. Tube

Similar IR

115-LBK1

$31.00

IR 115K

Air Hammer 5-Piece Chisel Set, 5000 BPM, 1-5/8" Stroke

This powerful, yet economical high-speed air hammer is designed for light exhaust system work and general cutting, chipping, and scraping. With enhanced user comfort and control, this hammer will make any job a breeze.

Features And Benefits

This hammer has an alloyed steel barrel and heat-treated piston to elongate its life and make sure it continues to perform the way it did on day one.
Thanks to an ergonomic design, this hammer is lightweight at 2.6lbs and easy to handle.
The 115 standard air hammer delivers up to 5,000 blows per minute, but thanks to a built-in power regulator, you’ll have full control over the speed and power of the tool.
Includes Air Hammer, and 5 chisels (Punch Chisel, Edging Tool, Tail Pipe Cutter, Blade Straight Chisel, Cutting Chisel)

Includes: Air Hammer and 5-peice chisel set (Punch Chisel, Edging Tool, Tail Pipe Cutter, Blade Straight Chisel, Cutting Chisel)
Product Application and Uses: These Air Percussive Hammers are designed for hammering, punching, cutting, chipping and scraping material through repetitive application of linear impacts of a tool steel that is retained and driven by the Hammer. Applications include light exhaust system work and general cutting, chipping, and scraping.
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 14
Air Consumption @ Load (l/min): 396
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 2
Average Air Consumption (l/min): 57
Blows per Min: 5000
Bore Diameter (in): .75
Color: Silver
Configuration/Handle Type: Pistol Grip
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 6.1
Product Weight (lb): 2.6
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 101.4 / 112.4
Stroke Length (in): 1.63
Vibration Level (m/s2): 14.8
Warranty: 1-year

Similar IR

116
117
121/Q
123MAXK
125-A

$90.06

SPRING

IR 116-11

Throttle Ball Spring Replacement Part for Ingersoll Rand Air Hammer

$15.00

SEAT

IR 116-303

Seat for Ingersoll Rand Air Hammer

$15.00

BALL

IR 116-50

Ball for Ingersoll Rand Air Hammer

$15.00

Air Hammer Kit - Stand

IR 116K

Air Hammer 5-Piece Chisel Set, 3500 BPM, 2-5/8" Stroke

The 116 standard air hammer is ideal for fast cutting action, and excels in medium exhaust systems, panel cutting, and general repair work.

Features And Benefits

Reliable: This hammer’s alloyed steel barrel and heat-treated piston prolong your tool’s life and make sure it delivers the same quality output every time.
Lightweight: Built for user comfort, this tool is lightweight and easy to use, so you never have to overexert yourself when working a job.
Power: With a built-in power regulator you have full control over the speed and power output of your hammer, up to 3,500 blows per minute.

Includes: 116 Air Hammer and 5 Piece Chisel Set (Punch Chisel, Edging Tool, Tail Pipe Cutter, Blade Straight Chisel, Cutting Chisel)
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15.0
Air Consumption @ Load (l/min): 425
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 3500
Bore Diameter (in): 0.69
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: General Duty
Handle Material: Aluminum
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.3
Product Width (in): 7.1
Product Height (in): 2.7
Product Weight (lb): 3.4
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 101.4 / 112.4
Standards/Certifications: Ce
Stroke Length (in): 2.63
Vibration Level (m/s2): 14.8
Warranty: 1-year

Similar IR

117K
115K
121-K6

$100.32

O-RING

IR 117-168

O-Ring Replacement Part for Ingersoll Rand 115, 116, 117 Series Air Hammer

$15.00

BUSHING

IR 117-565

Bushing for Ingersoll Rand 115 Series, 116 Series, 117 Series Air Hammer

$15.00

Air Hammer Standard Duty

IR 116

Air Hammer, 3500 BPM, 2-5/8" Stroke

The 116 standard air hammer is ideal for fast cutting action, and excels in medium exhaust systems, panel cutting, and general repair work.

Features And Benefits

Reliable: This hammer’s alloyed steel barrel and heat-treated piston prolong your tool’s life and make sure it delivers the same quality output every time.
Lightweight: Built for user comfort, this tool is lightweight and easy to use, so you never have to overexert yourself when working a job.
Power: With a built-in power regulator you have full control over the speed and power output of your hammer, up to 3,500 blows per minute.

Includes: Tool, Retainer, Manuals
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15
Air Consumption @ Load (l/min): 425
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 3500
Bore Diameter (in): 0.69
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: General Duty
Handle Material: Aluminum
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 7.8
Product Width (in): 7.01
Product Height (in): 2.28
Product Weight (lb): 3.4
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 101.4 / 112.4
Standards/Certifications: Ce
Stroke Length (in): 2.63
Vibration Level (m/s2): 14.8
Warranty: 1-year

Similar IR

117
115

$80.37

PLUNGER ASSEMBLY

IR 117-A64

Plunger Assembly for Ingersoll Rand 115 Series, 116 Series, 117 Series Air Hammer

$15.00

AIR HAMMER KIT - GENER.

IR 117K

Air Hammer 5-Piece Chisel Set, 2000 BPM, 3-1/2" Stroke

The 117 standard air hammer has a longer piston stroke than other hammers in the series. It is designed for exhaust work, bolt cutting, and front end work.

Features And Benefits

Performance: This general duty air hammer has a 3-1/2" stroke and 2,000 blows per minute.
Control: This hammer has a built-in power regulator that allows you to completely control the speed and power output of your tool.
Longer Life: To ensure a long life for your tool, it has a heat-treated piston and an alloyed steel barrel.
Kit Includes: Tool, Retainer, Manuals and 5 Piece Chisel Set; (1) punch chisel, (1) edging tool, (1) tail pipe cutter, (1) 3/4" wide blade straight chisel, and (1) cutting chisel.

Includes: Tool, Retainer, Manuals and 5 Piece Chisel Set; (1) punch chisel, (1) edging tool, (1) tail pipe cutter, (1) 3/4" wide blade straight chisel, and (1) cutting chisel.
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15
Air Consumption @ Load (l/min): 396
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 2000
Bore Diameter (in): 0.69
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: General Duty
Handle Material: Aluminum
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.9
Product Width (in): 7.4
Product Height (in): 2.68
Product Weight (lb): 4.1
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 103.5 / 114.5
Standards/Certifications: Ce
Stroke Length (in): 3.5
Vibration Level (m/s2): 9.2
Warranty: 1-year

Similar IR

116
115

$110.58

CAP SCREW

IR 119M2A163B

CAP SCREW

$15.00

CAP SCREW

IR 119M2A160B

CAP SCREW

$17.00

CAP SCREW

IR 119M2A701B

CAP SCREW

$17.00

AIR HAMMER GENERAL DUTY

IR 117

Air Hammer, 2000 BPM, 3-1/2" Stroke

The 117 standard air hammer has a longer piston stroke than other hammers in the series. It is designed for exhaust work, bolt cutting, and front end work.

Features And Benefits

Reliable: Ingersoll Rand promises tools that last, and this hammer is no different. You can count on it to perform the same way every time. Comes with a 1-year warranty.
2,000 Blows Per Minute: This hammer has a built-in power regulator that allows you to completely control the speed and power output of your tool.
Longer Life: To ensure a long life for your tool, it has a heat-treated piston and an alloyed steel barrel.

Includes: Tool, Retainer, Manuals
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15
Air Consumption @ Load (l/min): 396
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 2000
Bore Diameter (in): 0.69
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: General Duty
Handle Material: Aluminum
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.9
Product Width (in): 7.4
Product Height (in): 2.68
Product Weight (lb): 4.1
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 103.5 / 114.5
Standards/Certifications: Ce
Stroke Length (in): 3.5
Vibration Level (m/s2): 9.2
Warranty: 1-year

Similar IR

116
115

$96.90

LONG BARREL HAMMER KIT

IR 119MAXK

Vibration Reduced Long Barrel Air Hammer 5-Piece Chisel Set, 2530 BPM, 3-1/2" Stroke, Round Shank

This long barrel hammer will deliver the punch you need to get the job done quickly and comfortably. Great for exhaust and front-end jobs, general bolt cutting, pin driving, and body shearing work.

Features And Benefits

Increased Power: The 119MAX hammer has a 15% impact force increase over standard air hammers.
Reduced Vibration: The 119MAX vibration reduced air hammer comes equipped with anti-vibration features that reduce vibration by 30%.
Comfort Grip: Shock reduction and anti-slip grip.
Quick-Change Retainer: This quick-change retainer allows you to quickly and easily change out chisels, increasing your productivity as you work.
Durable: This heavy duty tool can withstand harsh environments and repeated drops, so no matter what you throw at it, it will continue to perform at top conditions.
Swivel Air Inlet: Prevents hose twisting during use.
Optimized for the vehicle repair industry, heavy trucks, and MRO.

Includes: 119MAX Long Barrel Air Hammer, Quick-change Retainer, Manuals, & 5-piece Chisel Set
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 23.8
Air Consumption @ Load (l/min): 673.94
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 2530
Bore Diameter (in): 3/4
Color: Grey
Configuration/Handle Type: Pistol Grip
Duty Rating: Industrial Duty
Handle Material: Composite
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.1
Product Width (in): 2
Product Height (in): 7.2
Product Weight (lb): 4.5
Retainer Type: Quick Change
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 95.7 / 106.7
Special Features: Vibration reduced
Standards/Certifications: Ce, Eac
Stroke Length (in): 3.5
Vibration Level (m/s2): 4.5
Warranty: 1-year

Similar IR

135MAXK
123MAXK
119MAX
117K
121-K6
135MAX

$216.60

Disc Brake Rotating, 22mm H-L

IR 12012

Disc Brake Rotating, 22mm H-L

$167.00

LONG BARREL HAMMER

IR 119MAX

Vibration Reduced Long Barrel Air Hammer, 2530 BPM, 3-1/2" Stroke, Round Shank

This long barrel hammer will deliver the punch you need to get the job done quickly and comfortably. Great for exhaust and front-end jobs, general bolt cutting, pin driving, and body shearing work.

Features And Benefits

Increased Power: The 119MAX hammer has a 15% impact force increase over standard air hammers.
Reduced Vibration: The 119MAX vibration reduced air hammer comes equipped with anti-vibration features that reduce vibration by 30%.
Comfort Grip: Shock reduction and anti-slip grip.
Quick-Change Retainer: This quick-change retainer allows you to quickly and easily change out chisels, increasing your productivity as you work.
Durable: This heavy duty tool can withstand harsh environments and repeated drops, so no matter what you throw at it, it will continue to perform at top conditions.
Swivel Air Inlet: Prevents hose twisting during use.
Optimized for the vehicle repair industry, heavy trucks, and MRO.

Includes: 119MAX Long Barrel Air Hammer, Quick-change Retainer, Manuals
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 23.8
Air Consumption @ Load (l/min): 673.94
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 2530
Bore Diameter (in): 3/4
Color: Grey
Configuration/Handle Type: Pistol Grip
Duty Rating: Industrial Duty
Handle Material: Composite
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.1
Product Width (in): 2
Product Height (in): 7.2
Product Weight (lb): 4.5
Retainer Type: Quick Change
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 95.7 / 106.7
Special Features: Vibration reduced
Standards/Certifications: Ce, Eac
Stroke Length (in): 3.5
Vibration Level (m/s2): 4.5
Warranty: 1-year

Similar IR

135MAX
123MAX
117
135MAXK

$208.05

KIT, RATCHET HEAD, 3/8" DRIVE

IR 1207-D3-TRK1

Ratchet Head Kit for Ingersoll Rand 1207MAX-D3 3/8" Drive Air Ratchet

Product Application and Uses: For use with 1207MAX-D3 air ratchet

For Use With

1207MAX-D3

$79.00

Disc Brake Friction, 22mm H-L

IR 12013

Disc Brake Friction, 22mm H-L

$173.00

RATCHET, 1/2" DRIVE

IR 1207MAX-D4

1/2" Air Ratchet Wrench, 65 ft-lb Torque, 220 RPM

The Ingersoll Rand MAX line — including the 1207MAX Series of air ratchet wrenches — delivers best-in-class performance with a number of premium features. You can choose between a ½” or ⅜” drive, but you’ll never have to sacrifice comfort or power with this line.

Features And Benefits

Our MAX line of tools is known for having a high torque output you can rely on. The 1207MAX Series features 65 ft-lb of maximum torque for all your toughest jobs.
Patent-pending forward/reverse collar provides unrestricted access to easily change the direction of the tool, which is critical in tight spaces where traditional tools get jammed.
Nickel-plated housing provides enhanced corrosion resistance.
Innovative variable-speed power regulator, and adjustable exhaust offers unprecedented control.

Includes: Bare Tool
Product Application and Uses: To remove and install threaded fasteners.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption (l/min): 651
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Black
Configuration/Handle Type: Straight
Drive Size (in): 1/2
Duty Rating: Industrial Duty
Exhaust Location: Side - Adjustable
Housing Material: Aluminum core with composite sleeve
Max Bolt Capacity Sae Grade 5 Bolt Diameter (in): 7/16
Max Free Speed (rpm): 220
Max Pressure (bar): 6.2
Max Torque (ft-lb): 65
Max Torque (in-lb): 779
Max Torque (nm): 88
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 10.85
Product Width (in): 1.89
Product Height (in): 2.1
Product Weight (lb): 3.19
Recommended Forward Torque Range (ft-lb): 10-60
Recommended Forward Torque Range (in-lb): 124-717
Recommended Forward Torque Range (nm): 14-81
Retainer Type: Ball
Reversible: Reversible
Side to Center Distance (in): 0.95
Side to Center Distance (mm): 24
Sound Pressure/Power Db(A): 85.0 / 96.0
Speed Setting: Variable Speed
Standards/Certifications: All Gov Regulations And Fda Certified
Vibration Level (m/s2): 3.2
Warranty: 1-year

Similar IR

1207MAX-D3
1077XPA
1099XPA

$233.70

IMPACT RATCHET, 1/2 DRIVE - 1211MAX-D4

IR 1211MAX-D4

1/2" Air Ratchet Wrench, 80 ft-lb Torque, 625 RPM

The Ingersoll Rand MAX line- including the 1211MAX Series of air ratchet wrenches- delivers best-in-class performance with a number of premium features. You can choose between a 1/2” or 3/8” drive, but you’ll never have to sacrifice comfort or power with this line.

Features And Benefits

Our MAX line of tools is known for having a high torque output you can rely on. The 1211MAX Series features 80 ft-lb of nut busting torque from a reactionless impact mechanism.
High Speed 625 RPM Free Speed lets you get more done, faster.
Nickel-plated housing provides enhanced corrosion resistance.
True ratchet mechanism delivers powerful manual break loose ability and final tighten capabilities.

Includes: Bare Tool
Product Application and Uses: To remove and install threaded fasteners.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption (cfm): 13.7
Air Consumption (l/min): 388
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Grey
Configuration/Handle Type: Straight
Drive Size (in): 1/2
Duty Rating: Industrial Duty
Exhaust Location: Front
Free Speed Sound Pressure/Power Db(A): 92.1 / 103.1
Handle Material: Composite
Housing Material: Aluminum core with composite sleeve
Impacting Sound Pressure/Power Db(A): 90.3
Max Bolt Capacity Sae Grade 5 Bolt Diameter (in): 1/2
Max Free Speed (rpm): 625
Max Pressure (bar): 6.2
Max Torque (ft-lb): 66
Max Torque (in-lb): 788
Max Torque (nm): 89
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Nut-busting/Breakaway Torque (ft-lb): 80
Nut-busting/Breakaway Torque (in-lb): 956
Nut-busting/Breakaway Torque (nm): 108
Power Source: Air Powered
Product Length (in): 11.89
Product Width (in): 1.38
Product Height (in): 2.2
Product Weight (lb): 3.03
Recommended Forward Torque Range (ft-lb): 10-60
Recommended Forward Torque Range (in-lb): 124-717
Recommended Forward Torque Range (nm): 14-81
Retainer Type: Ball
Reversible: Reversible
Side to Center Distance (in): 0.92
Side to Center Distance (mm): 23
Speed Setting: Variable Speed
Standards/Certifications: All Gov Regulations And Fda Certified
Vibration Level (m/s2): 12.7
Warranty: 1-year

Similar IR

1211MAX-D3
1207MAX-D4
1077XPA
1099XPA

$259.35

MAIN PISTON

IR 122MAX-20

MAIN PISTON

$15.00

RATCHET HOUSING ASSEMBLY

IR 1207-A322

RATCHET HOUSING ASSEMBLY

$104.00

O-RING

IR 122MAX-282

O-Ring Replacement Part for Ingersoll Rand 118MAX, 122MAX, 119MAX, 123MAX Air Hammer

$15.00

KIT, RATCHET HEAD, 1/2" DRIVE

IR 1207-D4-TRK1

Ratchet Head Kit Replacement Kit For Ingersoll Rand 1207MAX-D4 1/2" Drive Ratchet

Product Application/Uses:

For use with Ingersoll Rand 1207MAX-D4 1/2" Drive Ratchet

$59.00

REVERSE BUTTON

IR 1207-38

REVERSE BUTTON

$15.00

SPRING PIN

IR 122MAX-121

SPRING PIN

$15.00

IMPACT RATCHET, 3/8 DRIVE - 1211MAX-D3

IR 1211MAX-D3

3/8" High Speed Air Ratchet Wrench, 80 ft-lb Torque, 625 RPM

The Ingersoll Rand MAX line- including the 1211MAX Series of air ratchet wrenches- delivers best-in-class performance with a number of premium features. You can choose between a 1/2” or 3/8” drive, but you’ll never have to sacrifice comfort or power with this line.

Features And Benefits

Our MAX line of tools is known for having a high torque output you can rely on. The 1211MAX Series features 80 ft-lb of nut busting torque from a reactionless impact mechanism.
High Speed 625 RPM Free Speed lets you get more done, faster.
Nickel-plated housing provides enhanced corrosion resistance.
True ratchet mechanism delivers powerful manual break loose ability and final tighten capabilities.

Product Application and Uses: To remove and install threaded fasteners.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption (cfm): 13.7
Air Consumption (l/min): 388
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Grey
Configuration/Handle Type: Straight
Drive Size (in): 3/8
Duty Rating: Industrial Duty
Exhaust Location: Front
Free Speed Sound Pressure/Power Db(A): 91.1 / 102.1
Handle Material: Composite
Housing Material: Aluminum core with composite sleeve
Impacting Sound Pressure/Power Db(A): 90.6
Max Bolt Capacity Sae Grade 5 Bolt Diameter (in): 7/16
Max Free Speed (rpm): 625
Max Pressure (bar): 6.2
Max Torque (ft-lb): 66
Max Torque (in-lb): 788
Max Torque (nm): 89
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Nut-busting/Breakaway Torque (ft-lb): 80
Nut-busting/Breakaway Torque (in-lb): 956
Nut-busting/Breakaway Torque (nm): 108
Power Source: Air Powered
Product Length (in): 11.89
Product Width (in): 1.38
Product Height (in): 1.9
Product Weight (lb): 3.03
Recommended Forward Torque Range (ft-lb): 10-60
Recommended Forward Torque Range (in-lb): 124-717
Recommended Forward Torque Range (nm): 14-81
Retainer Type: Ball
Reversible: Reversible
Side to Center Distance (in): 0.92
Side to Center Distance (mm): 23
Speed Setting: Variable Speed
Standards/Certifications: All Gov Regulations And Fda Certified
Vibration Level (m/s2): 12.7
Warranty: 1-year

Similar IR

1211MAX-D4
1207MAX-D3
107XPA
109XPA

$259.35

AIR HAMMER KIT

IR 121-K6

Super Duty Air Hammer Kit, 3000 BPM, 2-9/32" Stroke

The 121 super duty air hammer makes fast work of body panel crimping and cutting, bushing driving, shearing, and other general front-end work. No matter how hard you work, this hammer will make it easier.

Features And Benefits

Durable: Built to withstand repeated drops and harsh conditions, this hammer will never let you down.
Long Lasting: The 121 super duty air hammer was built with an alloyed steel barrel and heat-treated piston to make sure it lasts as long as you need it to.
Super Duty: This hammer can produce up to 3,000 blows per minute so you can speed through your tasks with ease.
6 Chisels: Air hammer comes in a blow molded case with 6 chisels.
Built-in power regulator and trigger control
Easy to Maintain: "Easy out" throttle valve assembly.

Includes: 121 Air Hammer, Blow-molded Black Carrying Case and (6) Six Assorted Chisels. Assorted Chisels Include (1) 3/4 Flat Blade Chisel, (1) Punch Chisel, (1) Claw Ripper-edging Tool, (1) Single Blade Cutter, (1) Kwik Cutter, (1) Vee Chisel-spot Welder Breaker.
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15
Air Consumption @ Load (l/min): 425
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 3000
Bore Diameter (in): 3/4
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: Super Duty
Handle Material: Aluminum
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 12.6
Product Width (in): 9.7
Product Height (in): 3.6
Product Weight (lb): 7.2
Retainer Type: Spring
Shank SIze (in): 0.401
Shank Type: Round
Sound Pressure/Power Db(A): 95.3 / 111.3
Standards/Certifications: Ce, Eac
Stroke Length (in): 2.28
Vibration Level (m/s2): 19.9
Warranty: 1-year

Similar IR

115K
116K
117K

$165.30

Air Hammer - Heavy Duty

IR 121/Q

Super Duty Air Hammer, 3000 BPM, 2-9/32" Stroke

Make fast work of body panel crimping and cutting, bushing driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3000 blows per minute.

Features And Benefits

Long Lasting: The 121 super duty air hammer was built with an alloyed steel barrel and heat-treated piston to make sure it lasts as long as you need it to.
Super Duty: This hammer can produce up to 3,000 blows per minute so you can speed through your tasks with ease.
Easy to maintain: Includes "easy out" throttle valve assembly.
Built-in power regulator and trigger control

Includes: Tool, Retainer, Manuals
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 15
Air Consumption @ Load (l/min): 425
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 3000
Bore Diameter (in): 3/4
Color: Silver
Configuration/Handle Type: Pistol Grip
Duty Rating: Super Duty
Handle Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 7.63
Product Width (in): 8
Product Height (in): 3.1
Product Weight (lb): 3.5
Retainer Type: Spring
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 97.1 / 108.1
Standards/Certifications: Ce, Eac
Stroke Length (in): 2.28
Vibration Level (m/s2): 19.9
Warranty: 1-year

Similar IR

115
116
117

$153.90

BUSHING

IR 122MAX-503

BUSHING

$15.00

REAR CUSHION

IR 122MAX-304

Rear Cushion for Ingersoll Rand 122MAX, 118MAX Air Hammer

$22.00

RED GASKET

IR 122MAX-36

Red Gasket for Ingersoll Rand 118MAX, 122MAX, 119MAX, 123MAX Air Hammer

$15.00

RATCHET HEAD KIT

IR 1211-D4-TRK1

Ratchet Head Kit for Ingersoll Rand 1211MAX-D4 1/2" Drive Ratchet Wrench

Includes: Pawl kit (pawl, retaining pin, lock-spring, lock pin), Reverse button kit (reverse button bushing, spring, pin), Spring kit (2-thrust washer springs, thrust washer, 2-balls, retaining ring), Drive Assembly
Product Application and Uses: For use with Ingersoll Rand 1211MAX-D4 Series ratchet wrenches
Drive Size (in): 1/2

For Use With

1211MAX-D4

$79.00

MUFFLER

IR 122MAX-311

MUFFLER

$15.00

HAMMER MECHANISM KIT

IR 1211-THK1

Hammer Mechanism Kit for Ingersoll Rand 1211MAX Series Ratchet Wrench

Includes: Hammer frame and hammer pins (2)
Product Application and Uses: For use with Ingersoll Rand 1211MAX Series ratchet wrenches

For Use With

1211MAX-D3
1211MAX-D4

$37.00

YOKE

IR 1211-37

Yoke Replacement Part for Ingersoll Rand 1211MAX Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 1211MAX Series Impact Wrench (1211MAX-D3 and 1211MAX-D4)

For Use With

1211MAX-D4

$20.00

YOKE

IR 1207-37

YOKE

$15.00

Valve Assembly

IR 122MAX-4A

Valve Assembly for Ingersoll Rand 118MAX, 122MAX, 119MAX, 123MAX Air Hammer

Includes: Valve Unit (rear), Valve Seal, Valve Unit (front), (2) Spring Pins
Product Application and Uses: For use with Ingersoll Rand 118MAX, 122MAX, 119MAX, 123MAX Air Hammers

For Use With

119MAX
119MAXK
123MAX
123MAXK

$57.00

VALVE SPRING

IR 122MAX-51

VALVE SPRING

$15.00

REVERSING GEAR KIT

IR 1207-K82

Reversing Gear Kit for Ingersoll Rand 12007MAX, 107 Series Air Ratchet

$28.00

DEFLECTOR

IR 123MAX-123

DEFLECTOR

$15.00

RATCHET, 3/8" DRIVE

IR 1207MAX-D3

3/8" Air Ratchet Wrench, 65 ft-lb Torque, 220 RPM

The Ingersoll Rand MAX line — including the 1207MAX Series of air ratchet wrenches — delivers best-in-class performance with a number of premium features. You can choose between a ½” or ⅜” drive, but you’ll never have to sacrifice comfort or power with this line.

Features And Benefits

Patent-pending forward/reverse collar provides unrestricted access to easily change the direction of the tool, which is critical in tight spaces where traditional tools get jammed.
Nickel-plated housing provides enhanced corrosion resistance.
65 ft-lbs. of maximum torque ensures enough power for tough applications
Innovative variable-speed power regulator and adjustable exhaust offers unprecedented control.

Includes: Bare Tool
Product Application and Uses: To remove and install threaded fasteners.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption (cfm): 23
Air Consumption (l/min): 651
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Black
Configuration/Handle Type: Straight
Drive Size (in): 3/8
Duty Rating: Industrial Duty
Exhaust Location: Side - Adjustable
Housing Material: Aluminum core with composite sleeve
Max Bolt Capacity Sae Grade 5 Bolt Diameter (in): 7/16
Max Free Speed (rpm): 220
Max Pressure (bar): 6.2
Max Torque (ft-lb): 65
Max Torque (in-lb): 779
Max Torque (nm): 88
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 10.85
Product Width (in): 1.89
Product Height (in): 1.91
Product Weight (lb): 3.14
Recommended Forward Torque Range (ft-lb): 10-60
Recommended Forward Torque Range (in-lb): 124-717
Recommended Forward Torque Range (nm): 14-81
Retainer Type: Ball
Reversible: Reversible
Side to Center Distance (in): 0.95
Side to Center Distance (mm): 24
Sound Pressure/Power Db(A): 85.0 / 96.0
Speed Setting: Variable Speed
Standards/Certifications: All Gov Regulations And Fda Certified
Vibration Level (m/s2): 3.2
Warranty: 1-year

Similar IR

1207MAX-D4
107XPA
109XPA

$228.00

FRONT CAPFRONT CAP

IR 123MAX-27

FRONT CAPFRONT CAP

$27.00

RATCHET HEAD KIT

IR 1211-D3-TRK1

Ratchet Head Kit for Ingersoll Rand 1211MAX-D3 3/8" Drive Ratchet Wrench

Includes: Pawl kit (pawl, retaining pin, lock-spring, lock pin), Reverse button kit (reverse button bushing, spring, pin), Spring kit (2-thrust washer springs, thrust washer, 2-balls, retaining ring), Drive Assembly
Product Application and Uses: For use with Ingersoll Rand 1211MAX-D3 Series ratchet wrenches
Drive Size (in): 3/8

For Use With

1211MAX-D3

$80.00

SHORT BARREL HAMMER

IR 123MAX

Vibration Reduced Air Hammer, 3530 BPM, 2-5/8" Stroke, Round Shank

Great for front-end jobs, general bolt cutting, pin driving, and body shearing work, this short barreled hammer is ready to deliver the punch you need.

Features And Benefits

Increased Power: The 123MAX hammer has a 15% impact force increase over standard air hammers.
Reduced Vibration: The 123MAX vibration reduced air hammer comes equipped with anti-vibration features that reduce vibration by 30%.
Comfort Grip: Shock reduction and anti-slip grip.
Quick-Change Retainer: This quick-change retainer allows you to quickly and easily change out chisels, increasing your productivity as you work.
Durable: This hammer can withstand anything, including repeated drops and harsh conditions. No matter where you take it, it will perform like new.
Swivel Air Inlet: Prevents hose twisting during use.
Optimized for the vehicle repair industry, heavy trucks, and MRO.

Includes: Tool, Quick-change Retainer, Manuals
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 24.1
Air Consumption @ Load (l/min): 682.4
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 3530
Bore Diameter (in): 3/4
Color: Grey
Configuration/Handle Type: Pistol Grip
Duty Rating: Industrial Duty
Handle Material: Composite
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 7.2
Product Width (in): 2
Product Height (in): 7.2
Product Weight (lb): 3.9
Retainer Type: Quick Change
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 95 / 106
Special Features: Vibration reduced
Standards/Certifications: Ce, Eac
Stroke Length (in): 2.63
Vibration Level (m/s2): 5.9
Warranty: 1-year

Similar IR

119MAX
135MAX
117
135MAXK

$193.80

REAR CUSHION

IR 123MAX-304

REAR CUSHION

$15.00

HOUSING ASSEMBLY, 123MAX

IR 123MAX-59A

HOUSING ASSEMBLY, 123MAX

$86.00

SHORT BARREL HAMMER KIT

IR 123MAXK

Vibration Reduced Air Hammer 5-Piece Chisel Set, 3530 BPM, 2-5/8" Stroke, Round Shank

Great for front-end jobs, general bolt cutting, pin driving, and body shearing work, this short barreled hammer is ready to deliver the punch you need.

Features And Benefits

Increased Power: The 123MAX hammer has a 15% impact force increase over standard air hammers.
Reduced Vibration: The 123MAX vibration reduced air hammer comes equipped with anti-vibration features that reduce vibration by 30%.
Comfort Grip: Shock reduction and anti-slip grip.
Quick-Change Retainer: This quick-change retainer allows you to quickly and easily change out chisels, increasing your productivity as you work.
Durable: This hammer can withstand anything, including repeated drops and harsh conditions. No matter where you take it, it will perform like new.
Swivel Air Inlet: Prevents hose twisting during use.
Optimized for the vehicle repair industry, heavy trucks, and MRO.

Includes: 123MAX Air Hammer, Quick Change Retainer & 5-piece Chisel Set
Product Application and Uses: Vehicle Repair, Exhaust Front End Jobs, Bolt Cutting
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 24.1
Air Consumption @ Load (l/min): 682.4
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 3530
Bore Diameter (in): 3/4
Color: Grey
Configuration/Handle Type: Pistol Grip
Duty Rating: Industrial Duty
Handle Material: Composite
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 7.2
Product Width (in): 2
Product Height (in): 7.2
Product Weight (lb): 3.9
Retainer Type: Quick Change
Shank SIze (in): .401
Shank Type: Round
Sound Pressure/Power Db(A): 95 / 106
Special Features: Vibration reduced
Standards/Certifications: Ce, Eac
Stroke Length (in): 2.63
Vibration Level (m/s2): 5.9
Warranty: 1-year

Similar IR

119MAXK
121-K6
117K
135MAX
135MAXK

$219.45

VALVE CAP

IR 125-A-109

VALVE CAP

$15.00

SPRING CLIP

IR 124491

SPRING CLIP

$11.20

ANVIL

IR 125-A-20

Anvil for Ingersoll Rand 125-A Needle Scaler

Product Application and Uses: For use with Ingersoll Rand 125-A Needle Scalers

For Use With

125-A

Supersedes

PF2219-20

$35.00

VALVE

IR 125-A-2

VALVE

$15.00

NEEDLE HOUSING

IR 125-A-24

Needle Housing for Ingersoll Rand 125-A Needle Scaler

Product Application and Uses: For use with Ingersoll Rand 125-A Needle Scalers

For Use With

125-A

Supersedes

PF2219-24

$56.00

CASING SLEEVE

IR 125-A-30

CASING SLEEVE

$86.00

VALVE O-RING

IR 125-A-50

VALVE O-RING

$15.00

PISTON

IR 125-A-5

PISTON

$15.00

REAR VALVE BLOCK

IR 125-A-4

REAR VALVE BLOCK

$34.00

FRONT VALVE BLOCK

IR 125-A-3

FRONT VALVE BLOCK

$34.00

SPRING

IR 125-A-51

SPRING

$15.00

GASKET

IR 125-A-52

GASKET

$15.00

THROTTLE VALVE STEM O-RING

IR 125-A-53

THROTTLE VALVE STEM O-RING

$15.00

ADAPTER SCREW

IR 12E-354

ADAPTER SCREW

$15.00

CHISEL SCALER

IR 125CI-A

Air Chisel Scaler, 4800 BPM, 1-1/8" Stroke

The 125 Series Chisel Scaler is excellent for surface preparation work, involving the cleaning or removal of paint, rust, dirt or weld slag. It is a durable, dependable and economical solution to all your chiseling needs.

Features And Benefits

Durability: All steel housing construction.
With 4,800 blows per minute at free speed, you’ll be speeding through jobs.
Great for Vehicle Repair: Thanks to an ergonomic inline configuration and a short stroke, this tool is great for vehicle repair work.

Includes: Bare Tool
Product Application and Uses: Remove Paint, Rust, Dirt, Weld Slags
Actuation/Throttle Type/Switch Type: Lever
Air Consumption @ Load (cfm): 20
Air Consumption @ Load (l/min): 566
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Blows per Min: 4800
Bore Diameter (in): 1
Color: Black
Configuration/Handle Type: Straight
Drive Size (in): 1/8 - 1
Duty Rating: Medium Duty
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Non Sparking: No
Power Source: Air Powered
Product Length (in): 10.3
Product Width (in): 3.5
Product Height (in): 1.8
Product Weight (lb): 4.08
Shank SIze (in): 1/2
Shank Type: CLECO
Sound Pressure/Power Db(A): 96.3 / 107.3
Stroke Length (in): 1.13
Vibration Level (m/s2): 9.6
Warranty: 1-year

Similar IR