INGERSOLL-RAND IR TOOL S12880

IR 7776E-2C10-C6

7776E-2C10-C6 Air Hoist, 2200 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount

7700 Series chain hoists have been designed specifically for heavy-duty industrial applications. Simple, rugged and reliable, these hoists are constructed with few moving parts for easy repairs and less down time. These hoists come complete with 10 feet of standard lift and either 6 feet of pendant control or 6 feet of pull chain control.

Product Application/Uses:

Ideal for high duty cycles and when operating loads are near maximum capacity. Designed specifically for heavy-duty industrial applications and for environments that require clean air. Exhaust can be piped away and a two-stage filtration system removes foreign matter from air supplies so motors can operate at peak performance with longer operating live.

Features and Benefits:

• Meets ASME B30.16 specifications.
• Exceptional slow-speed control provides superior spotting characteristics and ability to confidently "inch" loads into position.
• Ideal for high duty cycles and when operating loads are near maximum capacity.
• Powerful, self-cooling rotary motors keep hoists at peak performance at high temperatures.
• Brake control easily adjusts to meet specific load ranges.
• Motor and gearing provides faster lift speeds with low air consumption.
• Compared to roller chain, link chain lasts longer, handles heavier loads and is better for high duty cycles.
• Pendant or pull chain control responds immediately to operator's commands

Capacity (lb): 2200

Lift (ft): 10

IR 7776E-2C10-C6U

7776E-2C10-C6U Air Hoist, 2200 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount, Fabric Chain Container

7700 Series chain hoists have been designed specifically for heavy-duty industrial applications. Simple, rugged and reliable, these hoists are constructed with few moving parts for easy repairs and less down time. These hoists come complete with 10 feet of standard lift and either 6 feet of pendant control or 6 feet of pull chain control.

Includes:

Fabric chain container

Product Application/Uses:

Ideal for high duty cycles and when operating loads are near maximum capacity. Designed specifically for heavy-duty industrial applications and for environments that require clean air. Exhaust can be piped away and a two-stage filtration system removes foreign matter from air supplies so motors can operate at peak performance with longer operating live.

Features and Benefits:

• Meets ASME B30.16 specifications.
• Exceptional slow-speed control provides superior spotting characteristics and ability to confidently "inch" loads into position.
• Ideal for high duty cycles and when operating loads are near maximum capacity.
• Powerful, self-cooling rotary motors keep hoists at peak performance at high temperatures.
• Brake control easily adjusts to meet specific load ranges.
• Motor and gearing provides faster lift speeds with low air consumption.
• Compared to roller chain, link chain lasts longer, handles heavier loads and is better for high duty cycles.
• Pendant or pull chain control responds immediately to operator's commands

Capacity (lb): 2200

Lift (ft): 10

IR 7776E-2C10-C6S

7776E-2C10-C6S Air Hoist, 2200 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount, Steel chain container

7700 Series chain hoists have been designed specifically for heavy-duty industrial applications. Simple, rugged and reliable, these hoists are constructed with few moving parts for easy repairs and less down time. These hoists come complete with 10 feet of standard lift and either 6 feet of pendant control or 6 feet of pull chain control.

Includes:

Steel chain container

Product Application/Uses:

Ideal for high duty cycles and when operating loads are near maximum capacity. Designed specifically for heavy-duty industrial applications and for environments that require clean air. Exhaust can be piped away and a two-stage filtration system removes foreign matter from air supplies so motors can operate at peak performance with longer operating live.

Features and Benefits:

• Meets ASME B30.16 specifications.
• Exceptional slow-speed control provides superior spotting characteristics and ability to confidently "inch" loads into position.
• Ideal for high duty cycles and when operating loads are near maximum capacity.
• Powerful, self-cooling rotary motors keep hoists at peak performance at high temperatures.
• Brake control easily adjusts to meet specific load ranges.
• Motor and gearing provides faster lift speeds with low air consumption.
• Compared to roller chain, link chain lasts longer, handles heavier loads and is better for high duty cycles.
• Pendant or pull chain control responds immediately to operator's commands

Capacity (lb): 2200

Lift (ft): 10

IR 77A-35B

FELT WIPER CUP

IR 77A25F107

Extended Angle Air Sander, 7" Polishing Bonnet Pad, 2,500 RPM, 1.5 HP, 5/8"- 11 Thread

This Pro Series 77A extended angle sander is designed for large areas and heavy duty materials. Your tool works hard so you don’t have to.

Features And Benefits

• Increased Safety: With a unique spring-loaded latch that resets each time the lever is released, you’ll never have to worry about your safety while working with this sander.
• Durability: With double-row ball bearings, a solid steel motor, and arbor housing, this tool will last.
• Reach: Thanks to an ergonomic design, the 77A extended angle sander can reach tough and tight spaces.
• Automatic Lubrication: Built-in mist lubricator automatically oils motor when throttle is activated.

Product Application and Uses: These air sanders are designed for both light and heavy sanding jobs such as roughing body filler, removing rust and smoothing welds.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 19.8
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Bearing Type: Double Row Ball
Configuration/Handle Type: Right Angle
Configuration/Handle Type: Auxiliary Handle
Exhaust Location: Side
Max Free Speed (rpm): 2500
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Mounting Type: Arbor
Pad Diameter or Size (in): 7
Power Source: Air Powered
Product Length (in): 17.56
Product Weight (lb): 8.38
Rated Power (hp): 1.5
Rated Power (kW): 1.12
Sound Pressure/Power Db(A): 85.9 / 98.9
Standards/Certifications: CE
Vibration Level (m/s2): <2.5
Warranty: 1-year
Wheel Diameter (in): 7

IR 77A-4-B10

ARBOR

IR 77A-578

NUT

IR 77A60P109

Air Angle Grinder, 9" Type 27/28 Wheel, 6000 RPM, 1.5 HP, 5/8"- 11 Thread, Side Exhaust

Air Pressure (psi): 90
Configuration/Handle Type: Right Angle
Max Pressure (bar): 6.2
Power Source: Air Powered
Warranty: 1-year

IR 77A75P107

Air Angle Grinder, 7" Type 27/28 Wheel, 7500 RPM 1.5 HP, 5/8"-11 Thread, Side Exhaust

From shipbuilding to general construction, the 77 Pro Series Angle Grinders are equipped to handle even the toughest of jobs.

Features And Benefits

• Reliability: With a built-in mist lubricator and motor controller to extend tool life and regulate performance, you can count on these grinders to work the way you want them to any time you pull the trigger.
• Power: These grinders feature high-powered motors that allow you to remove material quickly and easily.
• Durability: Built to last, these metal housed grinders can withstand repeated drops and harsh environments.

Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Configuration/Handle Type: Right Angle
Exhaust Location: Rear
Max Free Speed (rpm): 7500
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Rated Power (hp): 1.5
Sound Pressure/Power Db(A): 88.7
Vibration Level (m/s2): 2.6
Warranty: 1-year
Wheel Diameter (in): 7
Wheel Thickness (in): 1/4
Wheel Type: Type 27, 28

IR 77E-304A

COUPLING

IR 77E-A40-G4

HOUSING

IR 77H-42-4

VANE PACK

IR 77H50B106

Air Wire Brush Tool, 5000 RPM, 1.5HP, 5/8" - 11 Thread, Side Exhaust

This Pro Series 77H wire brush tool has a patented motor controller, designed to increase productivity while enhancing operator safety.

Features And Benefits

• Durability: Featuring a solid steel motor, arbor housing, and a heavy duty, double-row ball bearing, this tool is built to have a long life.
• Automatic Lubrication: Built-in mist lubricator that automatically oils the motor whenever the throttle is activated for smooth operation.
• Lock-out Lever: A unique system is incorporated in this tool that prevents accidental throttle operation by resetting the spring-loaded latch each time the lever is released.

Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 9
Air Consumption @ Load (l/min): 255
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Bearing Type: Double Row Ball
Configuration/Handle Type: Straight
Exhaust Location: Side
Housing Material: Steel
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Mounting Type: Arbor
Power Source: Air Powered
Product Length (in): 17.69
Product Weight (lb): 7.3
Rated Power (hp): 1.5
Sound Pressure/Power Db(A): 94.4 / 107.4
Vibration Level (m/s2): 7.8
Vibration Uncertainy K* (m/s2): 2.7
Warranty: 1-year
Wheel Type: Wire Brush

Similar IR

• 77H30B106

IR QP151D

Q2 DRILL W/ E-CHIP

IR QS1P15S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS140P4

PISTOL SHUTOFF PULSETOOL WITH 1/2" SQ DR

IR QTA010

Bench-mounted Torque Reaction Arm, 10 NM Capacity, 15" Max Working Reach, 13" Vertical Travel, 2.6 LB Weight Capacity, 27.8"H

Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.

Features And Benefits

• Spring balancer adjusts easily and offers effortless vertical movement.
• Simple, proven design for trouble-free setup and dependability.
• Anodized aluminum body delivers toughness in a lightweight design.
• Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
• Adjustable reach for easy use and convenience when locating fasteners.
• Multiple-tool holder options include right angle, swivel, and pistol grip.
• Cable or air line clamps keep work area clear and organized.
• Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
• Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.

Includes: tool holder and spring balancer
Product Application and Uses: For use with assembly tools.

For Use With

• 1RPNC1
• 41PP10TSQ4
• 41PP17TSQ4

IR QS80P3

SHUT OFF PULSE TOOL-3/8" SQ DRIVE

IR QS110P4

PISTOL SHUTOFF PULSETOOL WITH 1/2" SQ DR

IR QS70P3

SHUT OFF PULSE TOOL-3/8" SQ DRIVE QS70P3

IR QS1L05C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS150P6

SHUTOFF PULSE TOOL W/3/4" SQUARE DRIVE

IR QTA020

Bench-mounted Torque Reaction Arm, 20" Max Reach, 20 NM Torque, 14.5" Vertical Travel Distance, 5LB Weight Capacity, 31.8"H

Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.

Features And Benefits

• Spring balancer adjusts easily and offers effortless vertical movement.
• Simple, proven design for trouble-free setup and dependability.
• Anodized aluminum body delivers toughness in a lightweight design.
• Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
• Adjustable reach for easy use and convenience when locating fasteners.
• Multiple-tool holder options include right angle, swivel, and pistol grip.
• Cable or air line clamps keep work area clear and organized.
• Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
• Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.

Includes: tool holder and spring balancer
Product Application and Uses: For use with assembly tools.

IR QS70PQ1

SHUT OFF PULSE TOOL -1/4" HEX DRIVE

IR QS1P10S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS120P4

PISTOL SHUTOFF PULSETOOL 1/2" SQUARE DRIVE

IR QS1L10S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS60P3

SHUT OFF PULSE TOOL-3/8" SQ DRIVE

IR QS511D

Q2 DRILL W/ E-CHIP

IR QTA100

Bench-mounted Torque Reaction Arm, 52" Max Reach, 100 NM Torque, 22" Vertical Travel Distance, 10 lb Capacity, 78.7"H

Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.

Features And Benefits

• Spring balancer adjusts easily and offers effortless vertical movement.
• Simple, proven design for trouble-free setup and dependability.
• Anodized aluminum body delivers toughness in a lightweight design.
• Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
• Adjustable reach for easy use and convenience when locating fasteners.
• Multiple-tool holder options include right angle, swivel, and pistol grip.
• Cable or air line clamps keep work area clear and organized.
• Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
• Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.

Includes: tool holder and spring balancer
Product Application and Uses: For use with assembly tools.

IR QS1P05C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QTA040

Bench-mounted Torque Reaction Arm, 25" Reach, 40 NM Torque, 17.5" Vertical Travel Distance, 6.5 LB Weight Capacity, 39.7"H

Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.

Features And Benefits

• Spring balancer adjusts easily and offers effortless vertical movement.
• Simple, proven design for trouble-free setup and dependability.
• Anodized aluminum body delivers toughness in a lightweight design.
• Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
• Adjustable reach for easy use and convenience when locating fasteners.
• Multiple-tool holder options include right angle, swivel, and pistol grip.
• Cable or air line clamps keep work area clear and organized.
• Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
• Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.

Includes: tool holder and spring balancer
Product Application and Uses: For use with assembly tools.

IR QS1L05S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS301D

Q2 Drill w/ E-Chip

IR QP1P10S1D

Q2 SCREWDRIVER W/ E-CHIP

IR QS1L10C1D

Q2 SCREWDRIVER W/ E-CHIP

IR QTA150

Floor/Bench Mounted Torque Arm, 52" Reach, 111 ft-lb Torque, 22" Vertical Travel Distance, 10 lb Capacity, 78.7"H

Ingersoll Rand QTA torque reaction arms are constructed of lightweight aluminum and are available in a variety of torque capacities. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.

Features And Benefits

• Generous arm length makes QTA ideal for assembly line applications.
• Custom tool holder options permit use with Ingersoll Rand QA and QE tools.
• Safety stop eliminates over-extending arms.
• Adjustable height control delivers flexibility for virtually any application.
• Simple design ensures easy, effective setup and use.
• Solid, steel-frame construction for rugged dependability.
• Can be easily configured for either a bench-mounted or floor-mounted torque arm, and reconfigured as the job demands.

Capacity (lb): 10
Max Torque (ft-lb): 111
Max Torque (in-lb): 1328
Max Torque (nm): 150

IR QS151D

Q2 DRILL W/ E-CHIP

IR 319-B

Air Vertical Sander, 7" Adhesive Pad, 5,000 RPM, 1 HP, 5/8"-11 Thread, Side Handle Exhaust

Whether you’re working on a light job or a heavy one, this air vertical sander will help you do the job quick and well.

Features And Benefits

• Clean Work Area: With a side handle exhaust, you can blow all the debris away from your workspace and work precisely on the task at hand.
• Control: With variable speed you'll always be completely in control of your tool.
• Comfort: Weighing only 4.5 pounds, this sander is lightweight and easy to use, so you never have to worry about exhausting yourself on jobs.

Product Application and Uses: Designed for both light and heavy sanding jobs such as roughing body filler, removing rust and smoothing welds.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Average Air Consumption (cfm): 3.4
Average Air Consumption (l/min): 195
Color: Silver
Configuration/Handle Type: Vertical
Duty Rating: Maintenance Duty
Exhaust Location: Side- Handle
Housing Material: Aluminum
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Mounting Type: Arbor
Pad Diameter or Size (in): 7
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 9.41
Product Width (in): 8.85
Product Height (in): 7.3
Product Weight (lb): 4.8
Rated Power (hp): 1
Sound Pressure/Power Db(A): 90/101
Speed Setting: Variable Speed
Standards/Certifications: CE
Vacuum: None
Vibration Level (m/s2): 2.4
Warranty: 1-year

Supersedes

• 319A

IR 320AC4A

SUPERCEDED TO 5102MAX

IR 320-KCB5

5-piece Carbide Burr Set, 1/8" Shank, 1.5" Length, 75000 Max RPM

Includes: 5 piece carbide burr set; SA-43 Carbide double cut cylinder burr with flat end (9/16” flute length), SC-42 Carbide double cut cylinder burr with radius end (9/16” flute length), SD-42 Carbide double cut ball burr with flat end (1/8" flute length), SF-42 Carbide double cut tree burr with round end (1/2" flute length), SL-42 Carbide double cut tapered cone (8 degree ) burr with round end (1/2" flute length)
Product Application and Uses: For use with Ingersoll Rand 320PG Pencil Grinder
Max Free Speed (rpm): 75000
Product Length (in): 1.5
Shank SIze (in): 1/8

For Use With

• 320PG
• 320PGK

Supersedes

• 320-CB5

IR 320-KMP5

5-Piece Mounted Points Set, 1/8" Shank, 1.5" Length, 75,000 Max RPM

Includes: 5 piece mounted points set; Ball End, Aluminum Oxide mounted point (90 grit, 1/8" head diameter, 1/8" thickness), Flat cone end, Aluminum Oxide mounted point (80 grit, 1/8" head diameter, 1/4" thickness), Cylinder End, Aluminum Oxide (80 grit, 1/8" head diameter, 1/2" thickness), Cylinder End, Aluminum Oxide (80 grit, 3/16" head diameter, 1/2" thickness), Tree End, Aluminum Oxide (60 grit, 7/32" head diameter, 3/8" thickness)
Product Application and Uses: For use with Ingersoll Rand 320PG Pencil Grinder
Max Free Speed (rpm): 75000
Product Length (in): 1.5
Shank SIze (in): 1/8

For Use With

• 320PG
• 320PGK

Supersedes

• 320-MP5

IR 320PGK

Air Pencil Grinder Kit, 60,000 RPM, 5 Mounted Points & 5 Carbide Burrs

A slim profile pencil grinder makes it ideal for intricate spaces, precise grinders to final cleaning and polishing dies, to mold finishing, light deburring and flash removal. Also includes 5 assorted mounted points and carbide burrs in a hard case.

Features And Benefits

• COMFORT: Complete with a custom TPU grip, low vibration and noise and an oversized speed control knob, the 320PG was designed for enhanced user comfort and safety.
• PRODUCTIVITY: The countless capabilities of the 320PG allow for more tasks to be completed with a singular tool, allowing for maximum versatility and productivity.
• VALUE: Affordability across the board is a top priority for the 320PG, which provides high quality performance at a budget-conscious price point.
• Includes 5 assorted mounted points and 5 assorted carbide burrs.

Includes: (1) Tool; (2) Wrench; (1) Hose Assy; (1) Sleeve Exhaust; 5 Mounted points; 5 Carbide Burrs
Product Application and Uses: For precision grinding and applications in confined spaces. Used for final cleaning and polishing of dies, mold finishing, intricate grinding applications, light deburring and flash removal.
Actuation/Throttle Type/Switch Type: Twist
Air Consumption @ Load (cfm): 8
Air Consumption @ Load (l/min): 220
Air Inlet: 1/8" NPT
Air Pressure (psi): 90
Arbor/Collet: 1/8"
Bearing Type: Ball Bearing
Color: Grey
Configuration/Handle Type: Straight
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Grinder Type: Pencil Grinder
Handle Material: Alloy with TPU Grip
Hose Length (ft): 4.75
Housing Material: Aluminum Alloy
Max Free Speed (rpm): 60000
Max Pressure (bar): 6.2
Min Hose Size (in): 1/4
Pencil Diameter (in): 0.74
Power Source: Air Powered
Product Length (in): 5.51
Product Width (in): 0.74
Product Height (in): 0.74
Product Weight (lb): 0.51
Rated Power (hp): 0.1
Side to Center Distance (in): 0.37
Side to Center Distance (mm): 9
Sound Pressure/Power Db(A): 78 / 89
Speed Setting: Variable Speed
Spindle Offset (in): 0.37
Standards/Certifications: CE, EAC, UKCA
Vibration Level (m/s2): <3.2
Warranty: 1-year
Wheel Type: Burr, Mounted Points

Similar IR

• 320PG
• GH011A-600-1
• 7978
• 140EP
• EP51
• EP51K

IR 320PG

Air Pencil Grinder, 60,000 RPM

A slim profile pencil grinder makes it ideal for intricate spaces, precise grinders to final cleaning and polishing dies, to mold finishing, light deburring and flash removal

Features And Benefits

• COMFORT: Complete with a custom TPU grip, low vibration and noise and an oversized speed control knob, the 320PG was designed for enhanced user comfort and safety.
• PRODUCTIVITY: The countless capabilities of the 320PG allow for more tasks to be completed with a singular tool, allowing for maximum versatility and productivity.
• VALUE: Affordability across the board is a top priority for the 320PG, which provides high quality performance at a budget-conscious price point.

Includes: (1) Tool; (2) Wrench; (1) Hose Assy; (1) Sleeve Exhaust
Product Application and Uses: For precision grinding and applications in confined spaces. Used for final cleaning and polishing of dies, mold finishing, intricate grinding applications, light deburring and flash removal.
Actuation/Throttle Type/Switch Type: Twist
Air Consumption @ Load (cfm): 8
Air Consumption @ Load (l/min): 220
Air Inlet: 1/8" NPT
Air Pressure (psi): 90
Arbor/Collet: 1/8"
Bearing Type: Ball Bearing
Color: Grey
Configuration/Handle Type: Straight
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Grinder Type: Pencil Grinder
Handle Material: Alloy with TPU Grip
Hose Length (ft): 4.75
Housing Material: Aluminum Alloy
Max Free Speed (rpm): 60000
Max Pressure (bar): 6.2
Min Hose Size (in): 1/4
Pencil Diameter (in): 0.74
Power Source: Air Powered
Product Length (in): 5.51
Product Width (in): 0.74
Product Height (in): 0.74
Product Weight (lb): 0.51
Rated Power (hp): 0.1
Side to Center Distance (in): 0.37
Side to Center Distance (mm): 9
Sound Pressure/Power Db(A): 78 / 89
Speed Setting: Variable Speed
Spindle Offset (in): 0.37
Standards/Certifications: CE, EAC, UKCA
Vibration Level (m/s2): <3.2
Warranty: 1-year
Wheel Type: Burr, Mounted Points

Similar IR

• GH011A-600-1
• 7978
• 140EP
• EP51
• EP51K

IR 320PGK-75

Blow Molded Case for Ingersoll Rand 320PG Air Pencil Grinder

Includes:

1 blow molded case

Product Application/Uses:

For use with Ingersoll Rand 320PG Pencil Grinder

IR 324

Adhesive Remover Air Tool Kit, 4" Pad, 3700 RPM, 12 Eraser Pads

With a finely tuned motor and composite housing, you can trust this 324 adhesive remover tool to get the job done.

Features And Benefits

• Lock-out Lever: With a unique system that resets a spring-loaded latch each time the lever is released, you’ll never have to worry about accidental throttle operation.
• Lightweight and Ergonomic: Weighing only 1.8lbs, the 324 is easy to use regardless of the angle orientation to get the job done more effectively.
• Speed: Operates at an optimal speed of 3,700 rpm to remove decals, pinstripes, and other adhesives without damaging paint.
• Versatility: With the 324 you will get 12 eraser pads to get you moving and keep you moving. The 324-1 is offered as a low cost alternative that still supplies you with 1 eraser pad.

Includes: (1) tool, (12) eraser pads
Product Application and Uses: This adhesive remover tool is specifically designed to remove pinstripe tape, double-sided tape, adhesive and molding without damage to paint or surface.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 28
Average Air Consumption (l/min): 793
Color: Grey
Configuration/Handle Type: Straight
Housing Material: Impact and chemical-resistant composite housing
Max Free Speed (rpm): 3700
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Pad Diameter or Size (in): 4
Power Source: Air Powered
Product Length (in): 7.9
Product Width (in): 2
Product Height (in): 2.7
Product Weight (lb): 1.8
Sound Pressure/Power Db(A): 89 / 100
Tool Type: Full-size
Vibration Level (m/s2): 3.3
Warranty: 1-year

Similar IR

• 324-1

IR 324-700-1

Eraser Wheel Pad for Ingersoll Rand 324 Series Adhesive Removal Tool

Rubber eraser pad used to remove pinstripe tape, double-sided tape, adhesive and molding without damage to paint or surface.

Includes: 1 eraser pad
Product Application and Uses: For use with Ingersoll Rand 324 Series adhesive removal tool

For Use With

• 324
• 324-1

Similar IR

• 324-700-6

IR 324-1

Adhesive Remover Air Tool, 4" Pad, 3700 RPM, 1 Eraser Pad

With a finely tuned motor and composite housing, you can trust the 324 adhesive remover tool to get the job done.

Features And Benefits

• Lock-out Lever: With a unique system that resets a spring-loaded latch each time the lever is released, you’ll never have to worry about accidental throttle operation.
• Lightweight and Ergonomic: Weighing only 1.8lbs, the 324 is easy to use regardless of the angle orientation to get the job done more effectively.
• Speed: Operates at an optimal speed of 3,700 rpm to remove decals, pinstripes, and other adhesives without damaging paint.

Includes: (1) tool, (1) eraser pad
Product Application and Uses: This adhesive remover tool is specifically designed to remove pinstripe tape, double-sided tape, adhesive and molding without damage to paint or surface.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 28
Average Air Consumption (l/min): 793
Color: Grey
Configuration/Handle Type: Straight
Housing Material: Impact and chemical-resistant composite housing
Max Free Speed (rpm): 3700
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Pad Diameter or Size (in): 4
Power Source: Air Powered
Product Length (in): 7.9
Product Width (in): 2
Product Height (in): 2.7
Product Weight (lb): 1.8
Sound Pressure/Power Db(A): 89 / 100
Speed Setting: Variable Speed
Tool Type: Full-size
Vibration Level (m/s2): 3.3
Warranty: 1-year

Similar IR

• 324

IR 33387-2

KIT ASSEMBLY

IR 329-34

Bridge Mounting Screw for Ingersoll Rand 429 Reciprocating Saw

IR 33SKA

Large Air Drill, Reversible Roll Throttle, 300 RPM, 3HP, No. 3 Morse Taper

We have several series of large drills to meet your construction and industrial needs. The 22 Series works best for general applications up to ⅞ inch (22mm) holes, while the 33, 44, and 551 Series are better suited for opening and closing large valves, or for drilling larger holes between 1 inch (25mm) and 3 inches (76mm).

Features And Benefits

• Side Exhaust: All the Ingersoll Rand large drills come with side exhaust to keep exhaust air pointed away from you and away from your work.
• Governed Motor: No matter which Ingersoll rand large drill series you’re interested in, you can expect a governed motor that regulates air intake to keep these drills working at the peak of their power curve.

Product Application and Uses: These air drills are designed for heavy duty drilling and reaming between 1 inch (25mm) and 3 inches (76mm).
Actuation/Throttle Type/Switch Type: Reversible, Roll
Air Consumption (cfm): 85
Air Consumption (l/min): 2407
Air Inlet: 1/2" NPT
Capacity in Steel Drilling (in): 1-1/4
Capacity in Steel Reaming (in): 1
Color: Beige
Configuration/Handle Type: T-handle
Duty Rating: Super Duty
Exhaust Location: Side
Height Over Spindle (in): 14
Length of Feed (in): 4.25
Max Free Speed (rpm): 300
Max Power (hp): 3
Min Hose Size (in): 3/4
Power Source: Air Powered
Product Weight (lb): 25.75
Reversible: Reversible
Side to Center Distance (in): 1.88
Side to Center Distance (mm): 48
Sound Pressure/Power Db(A): 98.8 / 109.8
Spindle Type: No. 3 Morse Taper
Vibration Level (m/s2): <2.5
Warranty: 1-year

Similar IR

• 33SJA
• 33SMA

IR 328B

Dual Action Geared Orbital Air Sander, 8" Adhesive Pad, 5/32" Orbit, 825 RPM, 0.25 HP

The smooth strength and power of the dual-action geared air sander lets you remove heavy material and body filler on large, flat surfaces, leaving a clean, swirl-free finish.

Features And Benefits

• Dual Action: The smooth strength and power of the dual-action geared air sander lets you remove heavy material and body filler on large, flat surfaces, leaving a clean, swirl-free finish.
• Balanced: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
• Control: With variable speed and a dual-action pad motion, you have full control of your tool’s performance.
• Specifications: 5/32" Orbit, .25 HP, 825 RPM, 8" Pad, Avg air consumption 4 cfm.

Includes: Bare Tool
Product Application and Uses: These orbital sanders are designed for smoothing and sanding paint, fiberglass, wood and body filler.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Red
Configuration/Handle Type: Palm
Dust Collection Type: None
Duty Rating: Maintenance Duty
Max Free Speed (rpm): 825
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Motor: Air Gear Motor
Number of Vacuum Holes: 0
Orbit Diameter (in): 5/32
Pad Diameter or Size (in): 8
Power Source: Air Powered
Product Weight (lb): 4.7
Rated Power (hp): 0.25
Sound Pressure/Power Db(A): 82.7 / 93.7
Speed Setting: Variable Speed
Vacuum: None
Warranty: 1-year

IR 328B-A109

Housing Cover Assembly for Ingersoll Rand 328B Sander

IR 326

Air Cut-off Tool, Type 41, 20000 RPM, 2.3 Lbs.

This heavy-duty Air Cut-Off Tool was built for hard work. With a specialty of exhaust replacement, you can cut off mufflers and tailpipes quickly, efficiently, and quietly. Great for use in any vehicle repair market.

Features And Benefits

• Lock-Out Lever: This tool contains a unique system that prevents accidental throttle operation by utilizing a spring-loaded latch that resets each time the lever is released.
• Performance: With a guard that adjusts easily and quickly, and the ability to cut in either direction, your performance and productivity will soar when using this product.
• Reliability: Built to last, you can be sure the 326 Air Cut-Off Tool will perform reliably whenever you pull the trigger.

Includes: Tool (1), Wrenches (2), Manual Kit
Product Application and Uses: Cut Off Mufflers; Cut Off Tail Pipes; Cutting Sheet metal; Cutting Bolts And Nuts
Actuation/Throttle Type/Switch Location: Top
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 25
Air Consumption @ Load (l/min): 708
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 10
Average Air Consumption (l/min): 283
Color: Silver
Configuration/Handle Type: Straight
Duty Rating: Heavy Duty
Exhaust Location: Front
Guard Material: Steel
Handle Material: Composite
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 20000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 8.88
Product Width (in): 3.8
Product Height (in): 4.3
Product Weight (lb): 2.3
Reversible: Reversible
Sound Pressure/Power Db(A): 94.3 / 107.3
Warranty: 1-year
Wheel Diameter (in): 2.88
Wheel Thickness (in): 1/8
Wheel Type: Type 41

Similar IR

• 426
• 326G

IR 325SC4A

SUPERCEDED TO 5108MAX

IR 328B-825-8

8" Dual Action Backing Pad for Ingersoll Rand 328B Series Air Sander

Product Application and Uses: For use with Ingersoll Rand 328B Series Air Orbital Sander
Arbor/Collet: 5/16"-24 Thread
Max Free Speed (rpm): 10000
Number of Vacuum Holes: 0
Pad Diameter or Size (in): 8
Pad Face: Adhesive

For Use With

• 328B

IR 329-338-5

SCREW PACK

IR 325A-354

Die Cutter for Ingersoll Rand 325B Air Nibbler

IR 325B

Air Nibbler, 18 Gauge Capacity, 4200 Strokes/Min

Instead of shearing or sawing, the 325B Air Nibbler “nibbles” at metals, giving you better control and accuracy when cutting metals up to 18 gauge thicknesses at more than 6 feet per minute.

Features And Benefits

• Performance: With trigger actuation, this tool is featherable for variable speed and control.
• Reliability: Engineered for top reliability, you can be sure this tool delivers the same power as it did on day one. Comes with a 1-year warranty.
• Center Cut: With this Nibbler you’re able to begin cuts in the center of your metal without distorting the edges of your material.

Includes: Tool, Manuals
Product Application and Uses: Designed to cut mild steel aluminum, tin and other materials up to 18 gauge (1.2 mm).
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 17
Air Consumption @ Load (l/min): 481
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Silver
Configuration/Handle Type: Right Angle
Duty Rating: General Duty
Exhaust Location: Front
Housing Material: Aluminum
Max Free Speed (rpm): 4200
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 7.3
Product Width (in): 5.35
Product Height (in): 4.52
Product Weight (lb): 2.1
Sound Pressure/Power Db(A): 96 / 107
Steel Capacity (Gauge): 18
Strokes (per min): 4200
Vibration Level (m/s2): 15.9
Warranty: 1-year

IR 327LS-A

Air Tire Buffer, 7/16" Hex Quick Change, 3,000 RPM, 0.5 HP

Ideal for use in any vehicle repair market, this tire buffer will make quick work of patchwork, recapping, tire scuffing, and cleaning tire moldings.

Features And Benefits

• Rear Exhaust: With a rear exhaust, you can direct debris away from your workspace, giving you unrestricted access to your job.
• Safety: Featuring a special lock-out lever technology, you never have to worry about accidental throttle operation.
• Comfort: Easily fitting in your hand, this 1.4 lb. lightweight tool will work hard so you don't have to.

Product Application and Uses: Ideal for use in any vehicle repair market, this tire buffer will make quick work of patchwork, recapping, tire scuffing, and cleaning tire moldings.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 12.5
Average Air Consumption (l/min): 355
Chuck Capacity/Bit Capacity (in): 7/16
Color: Silver
Configuration/Handle Type: Straight
Drive Type: Hex
Exhaust Location: Rear
Housing Material: Aluminum
Max Free Speed (rpm): 3000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 8.5
Product Width (in): 1.6
Product Height (in): 2.7
Product Weight (lb): 1.4
Rated Power (hp): 0.5
Retainer Type: Quick Change
Sound Pressure/Power Db(A): 85/96
Standards/Certifications: CE
Vibration Level (m/s2): 1.7
Warranty: 1-year

Supersedes

• 327LS

IR 329-321

Work Guide for Ingersoll Rand 429 Reciprocating Saw

IR 324-700-6

6 Eraser Wheel Pads for Ingersoll Rand 324 Series Adhesive Removal Tool

Rubber eraser pad accessory used to remove pinstripe tape, double-sided tape, adhesive and molding without damage to paint or surface.

Includes: 1 eraser pad
Product Application and Uses: For use with Ingersoll Rand 324 Series adhesive removal tool

For Use With

• 324
• 324-1

Similar IR

• 324-700-1

IR 329-336

HOUSING COVER

IR 33235

BEARING (SET OF TWO), NON-RETURNABLE PART

IR 33387-1

BRAKE SHOE ASSEMBLY LINK CHAIN HOIST

IR 33440

GEAR ASSEMBLY

IR 328B-840

SCREW

IR 328B-11

FRONT END PLATE

IR 3372370

GEAR, RATCHET

IR 341A2M

Pneumatic Backfill Tamper, 5.75" Round Malleable Butt, 4" Stroke, 1-5/8" Bore

With dual-action sand wipers, a built-in muffler and a side exhaust, this tool is built for heavy use. These tools are commonly used by municipal and utility crews for compacting around both utility line repairs and new installations such as street lights, fire hydrants, and telephone poles prior to pouring concrete. In addition, this proven tool is ideal for backfilling around foundations or other tight areas.

Features And Benefits

• Durability: With a plated piston and front-end seal to protect your tool, this Backfill Tamper can be used in the toughest environments. The sand-wiper seal prevents dirt and grit from getting inside the tool.
• Reliability: Thanks to a built-in lubricator, these tools are built to run smoothly and last, while extending overall operating life. Comes with a 1-year warranty.
• Power: Thanks to its high-power output, you’ll be able to breeze through any job.
• Access: This tool is as lightweight as it is powerful making compact spaces easy to reach

Includes: Malleable Butt
Product Application and Uses: These tools are commonly used by municipal and utility crews for compacting around both utility line repairs and new installations such as street lights, fire hydrants, and telephone poles prior to pouring concrete. In addition, this proven tool is ideal for backfilling around foundations or other tight areas.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption @ Load (cfm): 29
Air Consumption @ Load (l/min): 821
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1550
Bore Diameter (in): 1-5/8
Butt Diameter (in): 5.75
Butt Material: Malleable/ Steel
Butt Shape: Round
Color: Beige
Configuration/Handle Type: Straight
Duty Rating: Super Duty
Exhaust Location: Side
Height Over Spindle (in): 6.7
Housing Material: Steel
Inline Oilers: Yes
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Muffler: Built In
Power Source: Air Powered
Product Length (in): 52.75
Product Width (in): 7.56
Product Weight (lb): 15.8
Retainer Type: Latch
Shank Opening: 7/8" Tapered Rod
Side to Center Distance (in): 3.6
Side to Center Distance (mm): 91
Special Features: Time Tested Valve Design, Round Piston Rod, Built In Muffler, Optional Front End Butts Available.
Standards/Certifications: Standards
Steels: Yes
Stroke Length (in): 4
Warranty: 1-year

Similar IR

• 130A1M
• 241A1M

IR 325A-350

Cutter for Ingersoll Rand 325 Series Air Nibbler

For Use With

• 325B

IR 327-A

3/8" Air Tire Buffer, 23,000 RPM, 0.5HP

Ideal for use in any vehicle repair market, this tire buffer will make quick work of patchwork, recapping, tire scuffing, and cleaning tire moldings.

Features And Benefits

• Rear Exhaust: With a rear exhaust, you can direct debris away from your workspace, giving you unrestricted access to your job.
• Safety: Featuring a special lock-out lever technology, you never have to worry about accidental throttle operation.
• Comfort: Easily fitting in your hand, this lightweight tool weighs less than 2 lbs. and will work hard so you don't have to.

Product Application and Uses: Ideal for use in any vehicle repair market, this tire buffer will make quick work of patchwork, recapping, tire scuffing, and cleaning tire moldings.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 5
Average Air Consumption (l/min): 142
Chuck Capacity/Bit Capacity (in): 3/8
Chuck Type: Keyed Chuck
Color: Silver
Configuration/Handle Type: Straight
Exhaust Location: Rear
Housing Material: Aluminum
Max Free Speed (rpm): 23000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 7.76
Product Width (in): 1.6
Product Height (in): 2.7
Product Weight (lb): 1.8
Rated Power (hp): 0.5
Sound Pressure/Power Db(A): 92/103
Standards/Certifications: CE
Vibration Level (m/s2): 1.2
Warranty: 1-year

Supersedes

• 327

IR 341SR-17

NUT

IR 341SR-30

Seal for Ingersoll Rand 341, 441 Series Air Tamper

IR 341SR-31

Seal for Ingersoll Rand 341, 441 Series Air Tamper

IR 341SR-311

Silencer for Ingersoll Rand 341 Series, 441 Series Air Percussive Tamper

IR 341SR-312

Seal for Ingersoll Rand 341, 441 Series Air Tamper

Product Application and Uses: For use with Ingersoll Rand 341 Series Air Tamper

For Use With

• 341A2M

IR 3445MAX

Air Angle Grinder/Cut-off Tool, 4.5" Wheel, 12,000 RPM, 0.88 HP, 5/8"-11 Thread, Rear Exhaust

The MAX Series family of angle grinders has a tool to meet your needs, whether you’re looking for a 4.5 or 5-inch option. The built-in lubricating wick optimizes the life of your angle gear set, while the safety guard protects you from debris, sparks and abrasives while you work.

Features And Benefits

• Max Power: The 4-1/2" wheel 3445MAX grinder delivers maximum power, productivity, comfort, and reliability to tackle the toughest material removal jobs in metalworking, construction, and more.
• Work Faster, Safer: The .88 HP air motor with 12,000 RPM delivers the power you need and the internal governor maximizes speed under the load, increasing the rate of material removal.
• Built-in lubrication: Its built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.
• Lightweight Comfort: The enhanced grip design increases operator comfort for extended use, and its lightweight construction, weighing less than 3.5 lbs., delivers the best power-to-weight ratio in its class.
• Material Compatibility: Cut, grind, or polish a variety of materials, including metal and concrete, with confidence thanks to the superior comfort and power.

Includes: Wheel Guard, Flange, Nut and Wheel Nut Wrenches
Product Application and Uses: Rust And Material Removal
Actuation/Throttle Type/Switch Location: Bottom
Actuation/Throttle Type/Switch Type: Lever
Air Consumption @ Load (cfm): 41
Air Consumption @ Load (l/min): 1161
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Average Air Consumption (cfm): 10
Average Air Consumption (l/min): 292
Bearing Type: Ball Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Duty Rating: Heavy Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Height Over Spindle (in): 2.8
Housing Material: Composite
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.31
Product Width (in): 3.41
Product Height (in): 6.81
Product Weight (lb): 3.44
Rated Power (hp): 0.88
Right Angle Length (in): 1.9
Right Angle Length (mm): 48
Side to Center Distance (in): 1.3
Side to Center Distance (mm): 33
Sound Pressure/Power Db(A): 79.6 / 90.6
Standards/Certifications: Ansi/Cagi B 186.1-1984, Ansi B186.1-2006, Bs En 792-7-2001
Vibration Level (m/s2): 6.3
Vibration Uncertainy K* (m/s2): 2.2
Warranty: 1-year
Wheel Diameter (in): 4.5
Wheel Thickness (in): 1/4
Wheel Type: Type 27 (Grinding) Type 1, 27, 41, 42 (Cutting)

Similar IR

• 345MAX
• M2A120RP1045
• G3A120RP1045
• G5351

IR 3445MAX-M

Angle Air Grinder/Cut-off Tool, 4.5" Wheel, 12,000 RPM, 0.88 HP, M14 Arbor, Rear-Piped Away Exhaust

In keeping with the tradition of Ingersoll Rand MAX tools, the MAX series Angle Grinders deliver MAX Power, MAX Productivity, MAX Comfort and improved reliability needed to tackle the toughest material removal jobs. MAX Series Angle Grinders gives you MAX performance for the daily grinding.

Includes:

Tool, Spanner wrench, Large Wrench, Small Wrench, Allen Wrenches (2), Piped Away Exhaust

Product Application/Uses:

These air grinders are designed for material removal or cutting off using a rotated abrasive wheel in most major markets, from vehicle repair and body work to construction and metal fabrication.

Features and Benefits:

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication.
• 1-year warranty.

Configuration/Handle Type: Right Angle

Max Free Speed (rpm): 12000

IR 345MAX

Angle Air Grinder/Cut-off Tool, 5" Wheel, 12,000 RPM, 0.88 HP, 5/8"-11 Thread, Rear Exhaust

In keeping with the tradition of Ingersoll Rand MAX tools, the MAX series Angle Grinders deliver MAX Power, MAX Productivity, MAX Comfort and improved reliability needed to tackle the toughest material removal jobs. MAX Series Angle Grinders gives you MAX performance for the daily grinding.

Features And Benefits

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With a .88 HP motor, 12,000 RPM and weighing less than 3.5 lbs., the 345MAX has an ideal power-to-weight ratio. The Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication. Cut, grind, or polish a variety of materials, including metal and concrete, with confidence thanks to the superior comfort and power.
• Built-in lubrication: Its built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.

Includes: Tool, Spanner wrench, Large Wrench, Small Wrench, Allen Wrenches (2), Piped Away Exhaust
Product Application and Uses: These air grinders are designed for material removal or cutting off using a rotated abrasive wheel in most major markets, from vehicle repair and body work to construction and metal fabrication.
Actuation/Throttle Type/Switch Location: Handle
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Free Speed (cfm): 10
Air Consumption @ Free Speed (l/min): 283
Air Consumption @ Load (cfm): 41
Air Consumption @ Load (l/min): 1161
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/8"-11 Thread
Average Air Consumption (cfm): 10
Average Air Consumption (l/min): 292
Bearing Type: Needle Bearing
Bearing Type: Ball Bearing
Color: Grey
Configuration/Handle Type: Right Angle
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Grinder Type: Angle Grinder
Guard Material: Steel
Handle Material: Composite
Height Over Spindle (in): 2.8
Housing Material: Composite
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 9.6
Product Width (in): 5.2
Product Height (in): 5
Product Weight (lb): 3.37
Rated Power (hp): 0.88
Right Angle Length (in): 8.27
Right Angle Length (mm): 210
Side to Center Distance (in): 1.3
Side to Center Distance (mm): 33
Sound Pressure/Power Db(A): 79.6 / 90.6
Standards/Certifications: Ansi/Cagi B 186.1-1984, Ansi B186.1-2006, Bs En 792-7-2001
Vibration Level (m/s2): 7.9
Vibration Uncertainy K* (m/s2): 2.5
Warranty: 1-year
Wheel Diameter (in): 5
Wheel Thickness (in): 1/4
Wheel Type: Type 27 (Grinding) Type 1, 27, 41, 42 (Cutting)

Similar IR

• 3445MAX
• G5351

IR 345MAX-M

Angle Air Grinder/Cut-off Tool, 5" Wheel, 12,000 RPM, 0.88 HP, M14 Arbor, Rear Exhaust

In keeping with the tradition of Ingersoll Rand MAX tools, the MAX series Angle Grinders deliver MAX Power, MAX Productivity, MAX Comfort and improved reliability needed to tackle the toughest material removal jobs. MAX Series Angle Grinders gives you MAX performance for the daily grinding.

Includes:

Tool, Spanner wrench, Large Wrench, Small Wrench, Allen Wrenches (2), Piped Away Exhaust

Product Application/Uses:

These air grinders are designed for material removal or cutting off using a rotated abrasive wheel in most major markets, from vehicle repair and body work to construction and metal fabrication.

Features and Benefits:

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication.
• 1-year warranty.

Configuration/Handle Type: Right Angle

Max Free Speed (rpm): 12000

IR 34RB029

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 187 RPM, 4 HP, 507 NM, Reversible

Air Consumption at Max HP (scfm): 180
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Drive Size (in): 1-1/2
Drive Type: Round Keyed
Exhaust Location: Side
Finish: Paint, Yellow
Gear Reduction: Double
Gear Train: Spur Gear
Housing Material: Steel Motor, Aluminum Gear Housing
Max Free Speed (rpm): 187
Max Pressure (bar): 6.2
Max Torque (ft-lb): 374
Max Torque (in-lb): 4487
Max Torque (nm): 507
Motor: Rotary Vane
Motor: Spur Gear
Mounting Type: Foot and Face
Power Source: Air Powered
Product Weight (lb): 75
Rated Power (hp): 4
Rated Power (kW): 2.98
Reversible: Reversible
Speed at Max Power (rpm): 99
Starting Torque (ft-lb): 224
Starting Torque (nm): 304
Warranty: 1-year

IR 34SR-383

3" Steel Butt 7/8" Rod Tamper for Ingersoll Rand 341A2M Tamper

Product Application and Uses: For use with Ingersoll Rand 341A2M Backfill Tamper

For Use With

• 341A2M

IR 34RB045

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 121 RPM, 4 HP, 788 NM, Reversible

Air Consumption at Max HP (scfm): 180
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Drive Size (in): 1-1/2
Drive Type: Round Keyed
Exhaust Location: Side
Finish: Paint, Yellow
Gear Reduction: Double
Gear Train: Spur Gear
Housing Material: Steel Motor, Aluminum Gear Housing
Max Free Speed (rpm): 121
Max Pressure (bar): 6.2
Max Torque (ft-lb): 581
Max Torque (in-lb): 6974
Max Torque (nm): 788
Motor: Rotary Vane
Motor: Spur Gear
Mounting Type: Foot and Face
Power Source: Air Powered
Product Weight (lb): 75
Rated Power (hp): 4
Rated Power (kW): 2.98
Reversible: Reversible
Speed at Max Power (rpm): 63
Starting Torque (ft-lb): 348
Starting Torque (nm): 472
Warranty: 1-year

IR 34RB078

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 69 RPM, 4 HP, 1370 NM, Reversible

Air Consumption at Max HP (scfm): 180
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Drive Size (in): 1-1/2
Drive Type: Round Keyed
Exhaust Location: Side
Finish: Paint, Yellow
Gear Reduction: Double
Gear Train: Spur Gear
Housing Material: Steel Motor, Aluminum Gear Housing
Max Free Speed (rpm): 69
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1010
Max Torque (in-lb): 12126
Max Torque (nm): 1370
Motor: Rotary Vane
Motor: Spur Gear
Mounting Type: Foot and Face
Power Source: Air Powered
Product Weight (lb): 75
Rated Power (hp): 4
Rated Power (kW): 2.98
Reversible: Reversible
Speed at Max Power (rpm): 36
Starting Torque (ft-lb): 606
Starting Torque (nm): 822
Warranty: 1-year

IR 34SR-85

Screw Replacement Part for Ingersoll Rand 341, 441 Tamper

Product Application and Uses: For use with Ingersoll Rand 341 Series Air Tampers

For Use With

• 341A2M

IR 34U-103-4

SCREW PACK

IR 34U-58-10

Washer for Ingersoll Rand HLK Chain Hoist,, 10-Pack

IR 34U-367

Bearing(182A83-603, 2950)

IR 35-36

GASKET, HAMMER CASE

IR 35-42-7

VANE PACK (SET OF 7)

IR 35-A53

ROTOR ASSEMBLY

IR 35-724

HAMMER

IR 35-A726

Anvil Assembly for Ingersoll Rand 35MAX and 36QMAX 1/2" Drive Impact Wrench

For Use With

• 36QMAX

IR 35-D727

HAMMER CASE ASSEMBLY

IR 35-K249

POWER REGULATOR KIT

IR 360-313

Air Belt Sander, 3/8"x13", 20,000 RPM, 4700 SFPM, 0.6 HP, Rear Exhaust

The 360-313 Pneumatic Belt Sander is engineered to make quick work of material removal and deliver smooth finishes. Whether removing spot welds, rust, deposits, or burrs; or fine-tuning a finished surface, these tools get the job done fast with a 0.6HP motor - 20% more than the leading competitor. Increase your productivity with tool-free belt changes (3/8" x 13") that make switching from one abrasive to the next quick and convenient, as well as a tool-free articulating arm that ensures every nook and cranny is easily reached. 360-418 also available with a 1/2" x 18" belt.

Features And Benefits

• Strong and Reliable: .6HP motor delivers maximum removal rates to ensure you get the job done quickly and can do more jobs each day.
• Adaptable: Tool-free articulating arm ensures hard to reach areas are never overlooked and quick adjustments for whatever task is at hand.
• Adjustable: A handy power regulator ensures the right amount of power for every task.
• Ergonomic: Narrow rubber grip provides comfort to last as long as you need.
• Comfort: Built for all-day use, these lightweight sanders weigh less than 2.5 lbs. and tackle every job without sacrificing comfort and ergonomics.
• Uses: Can accomplish a wealth of sanding and finishing tasks, from removing spot welds, rust, burrs and surface deposits to final finishing and much more.
• Includes: 3/8x13" Belt Sander and (3) Norton sanding belts (60, 80 and 100 Grit)

Includes: 3/8 x 13" Sander, hex wrench, (3) Norton sanding belts (60, 80 and 100 Grit), Safety manual, web card
Product Application and Uses: For sanding on a variety of surfaces such as metal, plastic, fiberglass, wood and other materials; removing spot welds, rust, burrs and surface deposits to final surface finishing.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption (cfm): 28.8
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arm Rotation: 360 Degree
Arm Type: Pivoting
Average Air Consumption (cfm): 28.8
Average Air Consumption (l/min): 815
Belt Size (in): 3/8 x 13
Belt Speed (sfpm): 4700
Color: Black
Configuration/Handle Type: Straight
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Housing Material: Metallic with rubber over mold
Max Free Speed (rpm): 20000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 12.4
Product Width (in): 3.5
Product Height (in): 3.4
Product Weight (lb): 2.29
Rated Power (hp): 0.6
Sound Pressure/Power Db(A): 90 / 101
Special Features: Tool-free belt changes, Tool Free articulating arm
Speed Setting: Variable Speed
Tool Type: Full-size
Vibration Level (m/s2): 1
Warranty: 1-year

Similar IR

• 360-418

IR 360-313-KIT-BELT

Belt Kit, 3/8x13 for Ingersoll Rand 360-313 Sander

Includes: (1) 100 3/8x13” Grit Norton Sanding Belt, (1) 80 Grit 3/8x13” Norton Sanding Belt, (1) 60 Grit 3/8x13” Norton Sanding Belt
Product Application and Uses: For use with Ingersoll Rand 360-313 belt sanders

For Use With

• 360-313

Supersedes

• G1811-KIT-BELT

IR 360-418

Air Belt Sander, 1/2"x18", 20,000 RPM, 4700 SFPM, 0.6 HP, Rear Exhaust

The 360-418 Pneumatic Belt Sander is engineered to make quick work of material removal and deliver smooth finishes. Whether removing spot welds, rust, deposits, or burrs; or fine-tuning a finished surface, these tools get the job done fast with a 0.6HP motor - 20% more than the leading competitor. Increase your productivity with tool-free belt changes (1/2" x 18") that make switching from one abrasive to the next quick and convenient, as well as a tool-free articulating arm that ensures every nook and cranny is easily reached. 360-313 also available with a 3/8" x 13" belt.

Features And Benefits

• Strong and Reliable: .6HP motor delivers maximum removal rates to ensure you get the job done quickly and can do more jobs each day.
• Adaptable: Tool-free articulating arm ensures hard to reach areas are never overlooked and quick adjustments for whatever task is at hand.
• Adjustable: A handy power regulator ensures the right amount of power for every task.
• Ergonomic: Narrow rubber grip provides comfort to last as long as you need.
• Comfort: Built for all-day use, these lightweight sanders weigh less than 2.5 lbs. and tackle every job without sacrificing comfort and ergonomics.
• Uses: Can accomplish a wealth of sanding and finishing tasks, from removing spot welds, rust, burrs and surface deposits to final finishing and much more.
• Includes: 1/2"x18" Belt Sander and (3) Norton sanding belts (60, 80 and 100 Grit)

Includes: 1/2" x 18" belt sander, hex wrench, (3) Norton sanding belts (60, 80 and 100 Grit), Safety manual, web card
Product Application and Uses: For sanding on a variety of surfaces such as metal, plastic, fiberglass, wood and other materials; removing spot welds, rust, burrs and surface deposits to final surface finishing.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption (cfm): 29.12
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arm Rotation: 360 Degree
Arm Type: Pivoting
Average Air Consumption (cfm): 29.12
Average Air Consumption (l/min): 825
Belt Size (in): 1/2 x 18
Belt Speed (sfpm): 4700
Color: Black
Configuration/Handle Type: Straight
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Housing Material: Metallic with rubber over mold
Max Free Speed (rpm): 20000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 14.96
Product Width (in): 3.23
Product Height (in): 3.54
Product Weight (lb): 2.4
Rated Power (hp): 0.6
Sound Pressure/Power Db(A): 92 / 103
Special Features: Tool-free belt changes, Tool Free articulating arm
Speed Setting: Variable Speed
Tool Type: Full-size
Vibration Level (m/s2): 1
Warranty: 1-year

Similar IR

• 360-313

IR 360-418-KIT-BELT

Belt Kit for Ingersoll Rand 360-418 Sander

Includes: (1) 100 Grit 1/2X18 Norton Sanding Belt, (1) 80 Grit 1/2"X18" Norton Sanding Belt, (1) 60 Grit 1/2"X18" Norton Sanding Belt
Product Application and Uses: For use with Ingersoll Rand 360-418 belt sanders

For Use With

• 360-418