GRACO INC. S10595
Fluid Nozzle, 1.5mm (.055In)
GG 197266
NOZZLE, FLUID,MACH,1.5MM
Graco 197266 PRO Xs Gun Fluid Nozzle, 1.5 mm Orifice Size
ULTRA SPRAYER, 795 XT, STD, NA
GG 19F710
ULTRA SPRAYER, 795 XT, STD, NA
Ultra 795 XT Standard Series Electric Airless Sprayer, Hi-Boy The Ultra 795 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 795 XT Standard is sure to change the way you spray. Xtreme Production & Reliability. XT ProContractor Series electric airless sprayers are built specifically for professional contractors looking to increase production on the industry's most silent spraying platform. Complete with numerous time saving features and the industry's longest life pumps, an XT ProContractor will keep you out of the shop, and on the job. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- 25% longer pump stroke for longer life before repacking
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- QuickReel hose management
- SmartDisplay XT compatible with BlueLink
- Endurance Vortex MAXLIFE EXTREME Pump
- CrushProof Inlet Strainer
- Rugged FlatProof tires
- Contractor PC Gun & RAC X LP 517 SwitchTip
SOLOTECH ST25 PUMP, H25-MPM-FG-SS-A1-A1-0
GG 19C726
SOLOTECH ST25 PUMP, H25-MPM-FG-SS-A1-A1-0
SoloTech™ h25 Peristaltic Pump, 1 hp BLDC motor with gear reducer, .142-5.22 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle. For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products. Single Roller Design- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction; improving hose life.
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Powder-coated aluminum cover with large sight window makes it easy to access and see internal parts
- Optional leak detector kit mounts on cover
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
THERM-O-FLOW HOSE, HEATED, 15-FT, #8, 3000 PSI
GG 19M403
THERM-O-FLOW HOSE, HEATED, 15-FT, #8, 3000 PSI
15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID) Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality. For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives. Maximum Fluid Working Pressure is dependent on operating temperature. Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C) 
THERM-O-FLOW HOSE, HEATED, 6-FT, #8, 3000 PSI
GG 19M401
THERM-O-FLOW HOSE, HEATED, 6-FT, #8, 3000 PSI
Graco 19M401 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
SOLOTECH ST32 PUMP, I32-HAC-EP-SS-A1-A1-0
GG 19D021
SOLOTECH ST32 PUMP, I32-HAC-EP-SS-A1-A1-0
ULTRA SPRAYER, 490 XT, HI-BOY, NA
GG 19D521
ULTRA SPRAYER, 490 XT, HI-BOY, NA
Ultra 490 XT Electric Airless Sprayer, Hi-Boy The Ultra 490 XT delivers an airless spray experience like no other. Featuring a 1.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, elevated performance, and the longest life pump in its class, the Ultra 490 XT is sure to become a staple in your fleet. Xtreme Productivity. Xtreme Reliability. Graco's Xtreme Torque Midsize Electric sprayers make it easier to get more work done in a day with increased flow and production rates. Xtreme Torque Motor Technology- 15X more torque than traditional motors
- 8X more magnets provide unmatched power and performance
- 90% lower running speeds extend motors life
- Up to 10X quieter
- Instantly responds to deliver the best finish quality
- More performance across its full tip size range
- Industry's largest operating pressure range (50-3,300 psi)
- Two selectable spray modes offer unique performance levels to boost efficiency on every job
- Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
- Use High Pressure Mode for Xtreme Performance (500 – 3,300 psi)
- Visible in even the toughest spraying conditions
- Endurance Vortex Rod lasts 3X longer than the closest competitor
- ProConnect Pump Removal for fast on-the-job service
- Industry’s fastest pump cleaning system
- Delivers 3X faster cleaning with 1/2 the water
- Convenient location
- Prevents damage by shutting off pump when it's time to refill
- Easy Out Filter provides easy maintenance and less clogging
- Only 31 lbs (Stand)
- Contractor PC Gun & RAC X LP 517 SwitchTip
THERM-O-FLOW HOSE, HEATED, 10-FT, #8, 3000 PSI
GG 19M402
THERM-O-FLOW HOSE, HEATED, 10-FT, #8, 3000 PSI
Graco 19M402 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
THERM-O-FLOW HOSE, HEATED, 20-FT, #10, 3000 PSI
GG 19M407
THERM-O-FLOW HOSE, HEATED, 20-FT, #10, 3000 PSI
Graco 19M407 20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
Manifold, U.S. Airless
GG 241161
MANIFOLD, U.S. AIRLESS
Graco 241161 Manifold with Standard 1/4 in NPSM Inlets
Kit, Repair, Filter, Tip, 10 Pack
GG 241804
KIT, REPAIR, FILTER, TIP
Graco 241804 Tip Filter Kit, 10 pack, replacement filters for spray tip orifice sizes 0.007, 0.009, and 0.011
Fireball 50:1 Grease Dispense Cart Pkg
GG 240883
Fireball 50:1 Grease Dispense Cart Pkg
Hose, Coupled, 3/16" X 25'
GG 241812
HOSE, COUPLED, 3/16" X 25'
Graco 241812 Fluid Hose, 3500 psi (242 bar) MWP, 1/4-18 npsm(fbe), 3/16 in (5 mm) ID, 25 ft (7.62 m) long, nylon tubing with polyurethane cover
3500 psi
Nylon Hose
1/4 F Connection, 0.1875 inch ID
25 feet
Hose, Coupled
GG 241811
HOSE, COUPLED
Graco 241811 Air Hose, 100 psi (0.7 MPa, 7 bar) max working pressure, 1/4-18 npsm(fbe), 1/4 in (6 mm) ID, 25 ft (7.62 m) long polyurethane tubing
HUSKY PUMP, 716A-PP02AA1ACBNBNPT
GG 241906
HUSKY PUMP, 716A-PP02AA1ACBNBNPT
Husky 716 Series Air-Operated Double Diaphragm Transfer Pump for Oil Evacuation/Transfer, Water, Antifreeze, Windshield Wash FluidThe Husky 716 air operated diaphragm pump delivers up to 16 gpm (60.6 lpm) of fluid and features center and end porting options.
Ideal for bulk antifreeze and windshield solvent transfer. Center- and end-porting No mechanical seals which causes fluid leaks or failures Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks 3/4 in (19.05 mm) center- and end-porting No seals to leak or fail Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks
REGULATOR, PRESS, FLUID, 0-60 PSI
GG 241976
REGULATOR, PRESS, FLUID, 0-60 PSI
Graco 241976 Low Pressure Lightweight Fluid Regulator, 3-30 psi (0.2-2 bar), 0.5 gpm, Acetal, Air, 1/4(f) x 1/4(f), 1/4(f) Port
Fluid pressure regulators control pressure of the downstream fluid, allowing operators to accurately control the pressure to guns, applicators and dispense valves
- Lightweight composite material is compatible with waterborne materials
- PTFE, stainless steel seat, and carbide ball provide wear resistance
- Pressure adjustment key with locking mechanism protects production settings
PRO-SHOT VALVE, GREASE, 1/4-18 NPT, W/ADP
GG 242056
PRO-SHOT VALVE, GREASE, 1/4-18 NPT, W/ADP
Graco 242056 Pro-Shot™ Dispense Valve - 1/4 NPT Inlet With Coupler and Extension
For heavy-duty applications, this non-metered dispense valve is designed to perform in heavy equipment shops, fleet maintenance shops, and municipal garages.
Application: Typical applications include service shops, Heavy-duty dealerships, Fast lube centers, Automotive dealerships, In-plant, Lube trucks, and Mining.- Pressure-assisted trigger for ease of operation
- Easy top adjustment with locking nut
- Rugged design to withstand harsh environments
- Includes coupler and extension
Pro-Shot Valve, Grease, 1/4-18 NPT
GG 242055
Pro-Shot Valve, Grease, 1/4-18 NPT
Pro-Shot™ Dispense Valve - 1/4 NPT Inlet Without Coupler or ExtensionFor heavy-duty applications, this non-metered dispense valve is designed to perform in heavy equipment shops, fleet maintenance shops, and municipal garages.
Typical applications include Service shops, Heavy-duty dealerships, Fast lube centers, Automotive dealerships, In-plant, Lube trucks, and Mining. Pressure-assisted trigger for ease of operation Easy top adjustment with locking nut Rugged design to withstand harsh environments Inlet 1/4 in. NPT Without coupler or extension
PRO-SHOT VALVE, GREASE, 3/8-18 NPT
GG 242057
PRO-SHOT VALVE, GREASE, 3/8-18 NPT
Graco 242057 Pro-Shot™ Dispense Valve - 3/8 NPT Inlet Without Coupler or Extension
For heavy-duty applications, this non-metered dispense valve is designed to perform in heavy equipment shops, fleet maintenance shops, and municipal garages.
Application: Typical applications include Service shops, Heavy-duty dealerships, Fast lube centers, Automotive dealerships, In-plant, Lube trucks, and Mining.- Pressure-assisted trigger for ease of operation
- Easy top adjustment with locking nut
- Rugged design to withstand harsh environments
- Without coupler or extension
PRO-SHOT VALVE, GREASE, 3/8-18 NPT, W/ADP
GG 242058
PRO-SHOT VALVE, GREASE, 3/8-18 NPT, W/ADP
Graco 242058 Pro-Shot™ Dispense Valve - 3/8 NPT Inlet With Coupler and Extension
For heavy-duty applications, this non-metered dispense valve is designed to perform in heavy equipment shops, fleet maintenance shops, and municipal garages.
Application: Typical applications include service shops, Heavy-duty dealerships, Fast lube centers, Automotive dealerships, In-plant, Lube trucks, and Mining.- Pressure-assisted trigger for ease of operation
- Easy top adjustment with locking nut
- Rugged design to withstand harsh environments
- Includes coupler and extension
GUN, SPRAY, SG2, MAGNUM, PACKAGED
GG 243011
GUN, SPRAY, SG2, MAGNUM, PACKAGED
SG2 Metal Spray Gun Use with any Magnum airless paint sprayer. Ideal for homeowners and diyer's for spraying a variety of coatings including primers, stains, varnishes and latex. Includes 515 spray tip, 60 mesh gun filter and hand-tight guard Graco's premium, aluminum spray gun with ergonomic design delivers solid performance and reliability. It's considered one of the longest lasting spray guns on the market. The well-balanced and lightweight full 4-finger trigger allows for a comfortable spraying experience. Full 4-finger trigger with light, smooth pull provides control and comfort Thumb engaged safety lock allows you to lock the handle when not spraying for safety Maximum operating pressure of 3,600 psi Replaceable in-handle paint filter reduces tip clogging and improves the finish Replaceable gun needle keeps maintenance simple For use with magnum and Graco paint sprayers Includes 515 spray tip, 60 mesh gun filter and hand-tight guard
Gun, Spray, SG3, Graco, Packaged
GG 243012
Gun, Spray, SG3, Graco, Packaged
SG3 Metal Spray Gun Use with any Magnum airless paint sprayer. Built-in hose swivel to reduce hose twists. Ideal for homeowners and diyer's for spraying a variety of coatings including primers, stains, varnishes and latex. Includes 515 spray tip, 60 mesh gun filter and hand-tight guard Graco's premium, aluminum spray gun is designed to deliver performance, be the longest lasting and most reliable spray gun on the market. The well-balanced and lightweight full 4-finger trigger allows for a comfortable spraying experience. The SG3 spray gun comes with a built-in hose swivel to help reduce hose twists. Built-in hose swivel provides for easy gun movement and reduces hose twisting Full 4-finger trigger with light, smooth pull provides control and comfort Thumb engaged safety lock allows you to lock the handle when not spraying for safety Maximum operating pressure of 3,600 psi Replaceable in-handle paint filter reduces tip clogging and improves the finish Replaceable gun needle keeps maintenance simple For use with Magnum and Graco paint sprayers Includes built-in hose swivel, 515 spray tip, 60 mesh gun filter and tip guard
EXTENSION, TIP, MAGNUM
GG 243042
EXTENSION, TIP, MAGNUM
Spray Tip Extension 20 in (50.8 cm) The 20 inch (50.8 cm) Spray Tip Extension attaches directly to your spray gun and reduces your need for ladders or scaffolding. Great for spraying those hard-to-reach areas like ceilings, overhangs and decks. Includes a spray tip guard. Spray high, low or recessed areas like ceilings, stairways, soffits, high walls, overhangs or decks reducing the need for ladders or stepstools Tip extension is 20 inches (50.8 cm) in length Made from aluminum for a durable and lightweight design Easily attaches without tools to Graco spray guns Connection is 7/8-in. thread Includes RAC IV Guard and Tip Seal KIT, REPAIR
GG 241782
KIT, REPAIR
KIT INCLUDES: NUT, PACKING [QTY. 1 ]; PACKING, U-CUP [QTY. 2 ]; PACKING, O-RING [QTY. 1 ]; LUBRICANT, TUBE, 1 OZ [QTY. 1 ]; WASHER, ROD, SCRAPER [QTY. 1 ]; WASHER, SEAL, BACK-UP [QTY. 1 ]; WASHER, SCRAPER [QTY. 1 ]
FILTER, 60 MESH, 190 ES
GG 243080
FILTER, 60 MESH, 190 ES
Graco 243080 Easy Out Pump Manifold Filter, 60 mesh
This ES/GS 60-Mesh Manifold Filter helps you get the best performance from your sprayer. For a smooth finish and no clogs, it filters out paint debris from your pump. This will extend the life of your sprayer and help you paint faster. This filter is compatible with all Graco GS and ES model paint sprayers.
Application: This ES/GS 60-Mesh Manifold Filter helps you get the best performance from your sprayer. For a smooth finish and no clogs, it filters out paint debris from your pump. This will extend the life of your sprayer and help you paint faster. This filter is compatible with all Graco GS and ES model paint sprayers.- Full-flow filter is designed to use the entire mesh surface for maximum filtration
- Captures dirt and debris inside the filter preventing the filter from getting clogged
- Vertical design allows for easy replacement on the job
- Ideal for filtering heavier materials such as interior and exterior latex paint
- Flushes quickly with minimal water for easy cleaning and is removed with the cap for less mess
- For use with all Graco ES and GS model paint sprayers
FLUID, PUMP ARMOR, GRACO
GG 243103
FLUID, PUMP ARMOR, GRACO
Graco 243103 Pump Armor Pump Protectant, 1 qt
Pump Armor protects pumps for storage and freeze-proof to -30° F.
- Model: Graco
- Series: Pump Armor
- For Use With: Pump
Guard, Rac 5
GG 243161
Guard, Rac 5
Graco 243161 RAC 5 HandTite Tip Guard
The RAC 5 HandTite Tip Guard helps to eliminate paint build-up, dripping and spitting. It also helps to provide safer spraying at higher pressures. Its finger grip design makes it easy to attach or remove without the need for tools. For use with all RAC 5 SwitchTips.
- Model: RAC 5
- Series: Spray Tip Guard
- Compatible Thread Size (in): 0.87
- Compatible Thread Size (mm): 22
- Compatible Tip Type: RAC 5
- For Use With: RAC 5 SwitchTip, RAC IV SwitchTip, LineLazer RAC 5 SwitchTip, TrueAirless Spray Tips, SG2 Spray Gun, SG3 Spray Gun
- Maximum Working Pressure (bar): 279.24
- Maximum Working Pressure (kg/cm²): 284.74
- Maximum Working Pressure (kPa): 27923.8
- Maximum Working Pressure (psi): 4050
GUARD, RAC 5, 11/16"
GG 243263
GUARD, RAC 5, 11/16"
Graco 243263 RAC 5 HandTite Tip Guard, 11/16 in
The RAC 5 HandTite Tip Guard helps to eliminate paint build-up, dripping and spitting. It also helps to provide safer spraying at higher pressures. Its finger grip design makes it easy to attach or remove without the need for tools. For use with all RAC 5 SwitchTips.
- Fits competitive guns with 11/16 in threads
Gasket, Rac 5, 5 Pack
GG 243281
Gasket, Rac 5, 5 Pack
Graco 243281 RAC 5 One Seal, 5 pack
Compatible with most materials. Easy installation withtools. Use only with RAC 5 SwitchTips and Guards.
- Model: RAC 5
- Series: Gasket
- Compatible Tip Type: RAC 5
- For Use With: RAC 5 HandTite Tip Guard
- Material: Steel, Rubber
Gun, Silver RAC
GG 243283
Gun, Silver RAC
Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTip The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. It is the preferred gun for high pressure applications. This Silver Plus gun includes a 2 finger trigger and a RAC 5 517 SwitchTip and Guard. Rugged Design- Durable forged aluminum withstands harsh work environments
- Lighter weight than competitive guns Polished body is easy to clean
- Factory set needle needs no trigger adjustments
- Guaranteed for life against breakage
- Maximum performance and long life
- Fluid flows directly to the tip through the gun fluid tube
- Provides the ability to spray heavier materials
- Including high solid coatings and mastics
- Provides faster shut-off to reduce spitting of light viscosity material
- Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)
HUSKY PUMP, 716A-PP01AA1-3ACBNBNPT
GG 243306
HUSKY PUMP, 716A-PP01AA1-3ACBNBNPT
Husky 716 AL Air Operated Double Diaphragm Metal Pump with AC Seat, Buna Ball, and Buna DiaphragmThe Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
Center- and end-porting No mechanical seals which causes fluid leaks or failures Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks 3/4 in (19.05 mm) center- and end-porting No seals to leak or fail Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks
HUSKY PUMP, 716A-PP01AA1-3ACPTPTPT
GG 243307
HUSKY PUMP, 716A-PP01AA1-3ACPTPTPT
Husky 716 AL Air Operated Double Diaphragm Metal Pump with AC Seat, PTFE Ball, and PTFE DiaphragmThe Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
Center- and end-porting No mechanical seals which causes fluid leaks or failures Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks 3/4 in (19.05 mm) center- and end-porting No seals to leak or fail Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks
Kit, Accy, Pail Sst 5 Gl
GG 243340
KIT, ACCY, PAIL SST 5 GL
Graco 243340 Pail Cover with Agitator, SST, use to agitate material in a 5 gal (18.9 l) pail
TANK, HIGH PRESSURE, 10 GAL
GG 243589
TANK, HIGH PRESSURE, 10 GAL
10 Gallon High Pressure Stainless Steel Tank, without agitator Industrial grade pressure tanks used to supply, agitate, and pressurize finishing liquids. For professional use only. 10 gallon (38 liters) High-Pressure Tank Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure 100 psi (0.7 MPa, 7 bar)
ULTRA-LITE 1K VALVE
GG 243666
ULTRA-LITE 1K VALVE
Graco 243666 1k Ultra-Lite Dispense Valve with 45° Connection
Application: For dispensing a wide variety of single component sealants and adhesives- Stainless steel wetted part
- Air operated valve gives reliable and repeatable performance
- Machine Mount Valve
HUSKY PUMP, 515AC-PP01AAC3-2ACBNBNPT
GG 243669
HUSKY PUMP, 515AC-PP01AAC3-2ACBNBNPT
Graco 243669 Husky 515 Series Air-Operated Double Diaphragm Transfer Pump for 50/50 Windshield Wash Solution, Water, Antifreeze
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
- Center and end porting options.
- No mechanical seals to cause fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
- Delivery up to 15 gpm (56.7 lpm)
- Easy-to-service air valve and ball checks
- Reliable air valve for years of dependable performance
Kit, Repair, Ac, 79978016001
GG 243153
KIT,REPAIR, AC, 79978016001
Graco 243153 Triton 3D 350 Air Valve Repair Kit
Kit, Repair Dia Gv#79978045001
GG 243152
KIT, REPAIR DIA GV#79978045001
Graco 243152 Triton 3D 350 PTFE Diaphragm Repair Kit
Application: For Triton 1030HP and 3D350HP Double Diaphragm Pumps Kit, Ball/Seat Gv#79978046001
GG 243154
KIT, BALL/SEAT GV#79978046001
Graco 243154 Triton 3D 350 Acetal Balls and Stainless Seats Kit
EXTENSION, POLE GUN, 6FT
GG 244164
EXTENSION, POLE GUN, 6FT
Graco 244164 Pole Gun Extension, 6 ft
Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with a pole gun and extension.
- For unmatched spraying performance in high or recessed areas
- Use with Contractor In-Line Valve and the CleanShot Shut-Off Valve to create different length pole guns
- Balanced design with no excessive weight at the end of the pole
THERM-O-FLOW VALVE, DISPENSE, 240V, HIGH FLOW
GG 243695
THERM-O-FLOW VALVE, DISPENSE, 240V, HIGH FLOW
Air Operated High-Flow Heated Dispense Valve Kit, Accessory, 230V, Header w/Disp V
GG 243701
Kit, Accessory, 230V, Header w/Disp V
FILTER, 100 MESH, ULTRA
GG 244068
FILTER, 100 MESH, ULTRA
Easy Out Pump Manifold Filter, Long, 100 mesh Using an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 100 mesh for materials such as lacquers and solvent-based enamels and paints. 
Ultra-Lite 6000 Gun, Flow
GG 243775
Ultra-Lite 6000 Gun, Flow
Graco 243775 Ultra-Lite 6000 Flow Gun with Tapered Valve Needle
The operator-friendly Ultra-Lite 6000 combines ergonomic design with high-operating pressure for dispensing low-to-medium viscosity industrial and automotive sealants and adhesives.
Application: For precise control of low-to-medium viscosity materials- Operating pressures to 6000 psi (414 bar, 41.4 MPa).
- 150° head/handle angle is more comfortable for operator
- Changeable tips for a variety of dispensing needs
- Compatible with a variety of nozzles (1/4 in NPT (F) with nut for metal flanged nozzle). Order nozzle separately.
REGULATOR, HTD, 230V
GG 243700
REGULATOR, HTD, 230V
230 V Heated Fluid Pressure Regulator These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.
FILTER, 200 MESH, ULTRA
GG 244069
FILTER, 200 MESH, ULTRA
Easy Out Pump Manifold Filter, Long, 200 meshUsing an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 200 mesh for thinner materials such as stains, varnishes, and solvent-based paints.
MODULE, GUN FLUSH BOX
GG 244105
MODULE, GUN FLUSH BOX
Gun Flush Box Module, bare Automated flushing system for manual spray guns with proportioning systems to prevent operator error, reduce labor, and contain flush stream Automated flushing system for manual spray guns Eliminates manual gun triggering for more accurate flushing and filling, and less waste Adaptors available for Pro Xp, AirPro and G15/G40 guns, sold separately 
FIREBALL 425 PUMP, 75:1, TRK PKG
GG 243818
FIREBALL 425 PUMP, 75:1, TRK PKG
Fire-Ball® 425 Series 75:1 400 lb. (181 kg) Open-Head Cover-Mounted PackageThe Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.
The Fire-Ball 425 is the pump of choice for your most demanding high volume applications. Durable Casting - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
EXTENSION, POLE GUN, 3FT
GG 244163
EXTENSION, POLE GUN, 3FT
Graco 244163 Pole Gun Extension, 3 ft
Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with a pole gun and extension.
- For unmatched spraying performance in high or recessed areas
- Use with Contractor In-Line Valve and the CleanShot Shut-Off Valve to create different length pole guns
- Balanced design with no excessive weight at the end of the pole
Kit, Repair, 400(Piston Seal)
GG 243728
KIT,REPAIR,400(PISTON SEAL)
Graco 243728 Pump Seal Repair Kit 400 Pumps
FIREBALL 300 SYSTEM, DISPENSE, BULK OIL
GG 244038
FIREBALL 300 SYSTEM, DISPENSE, BULK OIL
Fire-Ball® 300 Series 5:1 Oil Bulk Oil Dispensing Pump Package As the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently. Install the Fire-Ball 300 5:1 in high pressure, medium volume oil transfer applications such as automotive dealerships, fast lube centers, and service shops. Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life. Tank, Low Pressure, 10 Gal
GG 244148
TANK, LOW PRESSURE, 10 GAL.
Graco 244148 10 Gallon Supply Tank (pot, lid, gasket, plugs, fill port cap, pick-up tube, liner), ASME rated, stainless steel
- ASME rated to ensure it meets factory standards
- High quality stainless steel design is compatible with many materials
- Use in stand-alone spraying, material/catalyst supply, or as a moisture sensitive material reservoir
INLINE GUN
GG 244161
INLINE GUN
Contractor Gun In-Line Valve Genuine Graco Contractor In-Line Valve Gun. Refer to the parts manual for your sprayer to ensure part compatibility Graco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come.Can be used with other extended reach tools such as Heavy Duty Extensions and Telescoping Extensions for Pressure Rolling
Provides a straight connection to extensions for the most optimal rolling position
In-handle paint filter and built-in swivel connection for top spraying performance
Ability to rotate 180˚ allows spraying in any position
FRAME, ROLLER, 9", CONTRACTOR
GG 244271
FRAME, ROLLER, 9", CONTRACTOR
Graco 244271 EvenFlow Pressure Roller Frame, 9 in (229 mm)
Attaches to the Heavy-Duty Extension to make rolling easier.
- Model: Graco
- Series: Roller Cover
- For Use With: Heavy Duty Extension
- Maximum Pole Length (in): 9
- Maximum Working Pressure (bar): 248
- Maximum Working Pressure (kPa): 24800
- Maximum Working Pressure (MPa): 24.8
- Maximum Working Pressure (psi): 3600