GRACO INC. S10595

GG LCB600

GG LCC080

GG LCC280

GG LCC520

GG LCE600

GG LCF140

GG M0221

GG M1060A-1-1-0.50

GG P14DCS

GG P26LCS

CHECK-MATE PUMP,26:1 6500/500 CS SD

Graco P26LCS 26:1 - 500cc Check-Mate Pump with NXT 6500 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer

• NXT 6500 Air Motor
  
  • Low Noise
  • Modular design for easier maintenance
  • Rugged body armor won't rust or dent
  • Highest technology air motor on the market
• 500cc Check-Mate Lower
  
  • Severe Duty coatings on rods and cylinder Extends production time

• Xtreme Coupler - No tool connection

  • Quick-disconnect coupler for easy maintenance

  Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting

  • Reduces repair costs

• Replaceable Seat

  • Minimizes service costs

• Cast Outlet and Inlet Housing

  • Improves structural integrity

• NEW Xtreme Coupler

  • Quick-disconnect coupler for easy maintenance

• Replaceable Outlet Fitting

  • Reduces repair costs

• Piston Valve with Floating Piston Seal

  • For maximum pressure balance over a range of material viscosities

• Replaceable Seat

  • Minimizes service costs

• Floating Priming Plate

  • Provides uniform flow

• Cast Outlet and Inlet Housing

  • Improves structural integrity

• NEW Cartridge Throat Packings

  • Allows for easy servicing without removing from ram

• Modular Air Valve

  • De-icing controls
  • Up to 50% quieter than previous models
  • Modular air valve - eliminates stalling, easy-to-repair

• Hard Part Coatings

  • Standard Severe Duty coating on rods and cylinder maximizes wear life

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

GG P26LSS

GG P40HC1

GG P40LCM

GG P42LCM

GG PF3521

GG SDU.A05AAA1AA0C21

SANIFORCE DRUM UNLOADER SYSTEM, RAM, HYGIENIC

Graco SDU.A05AAA1AA0C21 SaniForce Ram Unit, Stainless Steel Frame, 12:1 PP, Inflatable Seal, Exposed Controls

SaniForce Drum Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 2,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The inflatable seal system it is flexible enough to accomodate multiple drum shapes and sizes. With multiple pump, control, plate, and frame options the systems are configurable to match requirements of most users applications.

• Reduce material waste with up to 99% material evacuation
• Improve worker ergonomics by eliminating hazards associated with scooping and dumping options
• Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates
• Configurable systems to meet requirements of almost any ingredient unloading application

• Model: SaniForce 2.0
• Series: Drum Unloader

• Ambient/Warm Melt/Hot Melt: 90
• Application: Food, Personal Care

• Compatible Drum Height (cm): 101.6
• Compatible Drum Height (in): 40
• Compatible Drum Height (mm): 1016
• Compatible Drum Inside Diameter (cm): 54.6-59.0
• Compatible Drum Inside Diameter (in): 21.5-23.25
• Compatible Drum Inside Diameter (mm): 546-590

• Container Type: Drum
• Control Panel Material: Aluminum, Plastic
• Control Panel Type: Exposed

• Finish/Coating: Bead Blast

• Frame Material: Stainless Steel

• Material Certification: EN 1024:2004 Type 2.1 (Standard)
• Material Container Volume (gal): 55
• Material Container Volume (l): 208

• Maximum Air Inlet Pressure (bar): 6.89
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32.2

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Height (cm): 295
• Maximum Height (ft): 9.7
• Maximum Height (in): 116
• Maximum Height (m): 2.95
• Maximum Height (mm): 2946

• Maximum Operating Temperature ( degree C): 32
• Maximum Operating Temperature ( degree F): 90

• Maximum Working Pressure (bar): 83
• Maximum Working Pressure (kPa): 8300
• Maximum Working Pressure (MPa): 8.3
• Maximum Working Pressure (psi): 1200

• Minimum Height (cm): 194
• Minimum Height (ft): 6.4
• Minimum Height (in): 76.2
• Minimum Height (m): 1.94
• Minimum Height (mm): 1935

• Overall Depth (cm): 69.8
• Overall Depth (in): 27.5
• Overall Depth

GG SDU.B05AAA6AA0C21

SANIFORCE DRUM UNLOADER SYSTEM, RAM, HYGIENIC

Graco SDU.B05AAA6AA0C21 SaniForce Ram Unit, Carbon Steel Frame, 12:1 PP, Inflatable Seal, Exposed Controls

SaniForce Drum Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 2,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The inflatable seal system it is flexible enough to accomodate multiple drum shapes and sizes. With multiple pump, control, plate, and frame options the systems are configurable to match requirements of most users applications.

• Reduce material waste with up to 99% material evacuation
• Improve worker ergonomics by eliminating hazards associated with scooping and dumping options
• Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates
• Configurable systems to meet requirements of almost any ingredient unloading application

• Model: SaniForce 2.0
• Series: Drum Unloader

• Ambient/Warm Melt/Hot Melt: 90
• Application: Food, Personal Care

• Compatible Drum Height (cm): 101.6
• Compatible Drum Height (in): 40
• Compatible Drum Height (mm): 1016
• Compatible Drum Inside Diameter (cm): 54.6-59.0
• Compatible Drum Inside Diameter (in): 21.5-23.25
• Compatible Drum Inside Diameter (mm): 546-590

• Container Type: Drum
• Control Panel Material: Aluminum, Plastic
• Control Panel Type: Exposed

• Finish/Coating: Painted

• Frame Material: Carbon Steel

• Material Certification: EN 1024:2004 Type 2.1 (Standard)
• Material Container Volume (gal): 55
• Material Container Volume (l): 208

• Maximum Air Inlet Pressure (bar): 6.89
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32.2

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Height (cm): 295
• Maximum Height (ft): 9.7
• Maximum Height (in): 116
• Maximum Height (m): 2.95
• Maximum Height (mm): 2946

• Maximum Operating Temperature ( degree C): 32
• Maximum Operating Temperature ( degree F): 90

• Maximum Working Pressure (bar): 83
• Maximum Working Pressure (kPa): 8300
• Maximum Working Pressure (MPa): 8.3
• Maximum Working Pressure (psi): 1200

• Minimum Height (cm): 194
• Minimum Height (ft): 6.4
• Minimum Height (in): 76.2
• Minimum Height (m): 1.94
• Minimum Height (mm): 1935

• Overall Depth (cm): 69.8
• Overall Depth (in): 27.5
• Overall Depth (mm):

GG SP401007

GG SP433002

GG SP433003

GG SP433006

GG SP433007

GG SPK-1203-00

GG SPK-1211-00

GG SX02/075/050

GG SX10/320/011

GG TOFC-200-E-24P-3-M-1P-1

GG TOFC-200E-24S-3-M-1P-1

GG U70081

GG V-WLI161818

GG 290331

GG 295095

GG 295167

GG 295169

GG 295229

GG 295339

GG 295377

GG 295428

GG 295433

GG 295607

GG 295693

GG 295825

GG 295887

GG 295948

GG 295949

GG 296178

GG 296180

GG 296579

GG 296621

GG 296614

GG 296622

GG 296625

GG 296627

GG 296628

GG 296640

GG 296641

GG 296652

GG 296713

GG 296745

GG 296742

GG 296768

GG 296786

GG 296794

GG 296815

GG 296895

GG 296884

GG 297251

GG 297357

GG 297911

GG 297966

GG 298011

GG 298776

GG 331210

GG 425MSN

GG 501095

GG 501511

GG 512613

GG 513308

GG 513697

GG 513817

GG 513937

GG 514768

GG 521229

GG 552180

GG 570122

GG 5901-F

GG 605286

GG 6690-16-771500R

GG 6690-16-772800R

GG 803350

GG 833232

GG 947076

GG 947077

GG 947078

GG 96A504

GG AAM719

GG AD132N

GG AD141N

GG AEF512

GG AEF514