Spray Guns - Manual

STELLAIR GUN, CONV (.055), WIDE PATTERN

Graco 2004180 Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.070), WIDE PATTERN

Graco 2004181 Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 0.018
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.055), WIDE PATTERN

Graco 2004182 Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.070), WIDE PATTERN

Graco 2004183 Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 0.018
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, COMP (.055), WIDE PATTERN

Graco 2004184 Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Compliant
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: Compliant Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, COMP (.070), WIDE PATTERN

Graco 2004185 Stellair Air Spray Gun, Compliant, 0.070 in (1.8 mm), Wide Pattern, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• Wide pattern air cap sprays consistent coverage over large surfaces.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Compliant
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wide Pattern
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8
• Gun Type: Compliant Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GG 2005976

GUN, COMPLIANT, .070, WITH HOSE

Graco 2005976 Stellair ACE Air Spray Gun with Hose, .070 in (1.8 mm) Nozzle Size

The unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer.

• Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Hoses with swivel attachments move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

• Model: Stellair ACE
• Series: Manual

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: General Industry
• Applicator Type: Air Spray

• Compatible Material: Enamel, Epoxy, Fast-Set, High Solids, Latex, Plural-Component, Sealants, Solventborne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (in): 0.125
• Fluid Inlet Size (mm): 3.175
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Type: HVLP/LVMP Gun
• Gun Weight (g): 209
• Gun Weight (oz): 7.4

• Hose Package: Includes Hose
• Includes: Air Cap, Needle Assembly, Nozzle, 6 ft air hose, 6 ft fluid hose

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature (°C): 43
• Maximum Operating Temperature (°F): 109

GUN, HVLP (.030)

Graco 2006145 Stellair Air Spray Gun, HVLP, 0.030 in (0.8 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.030
• Fluid Orifice Size (mm): 0.8
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GUN, HVLP (.086)

Graco 2006146 Stellair Air Spray Gun, HVLP, 0.086 in (2.2 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.086
• Fluid Orifice Size (mm): 2.2
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GUN, HVLP (.110)

Graco 2006147 Stellair Air Spray Gun, HVLP, 0.110 in (2.8 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.110
• Fluid Orifice Size (mm): 2.8
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GUN, CONVENTIONAL (.042) WATERBORNE

Graco 2006151 Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.1
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GUN, CONVENTIONAL (.059) HIGH WEAR

Graco 2006152 Stellair Air Spray Gun, Conventional, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.059
• Fluid Orifice Size (mm): 1.5
• Gun Type: Conventional Gun
• Includes: High Wear Packing, Carbide Needle Assembly, Carbide Tip Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GUN, COMPLIANT (.059) HIGH WEAR

Graco 2006153 Stellair Air Spray Gun, Compliant, 0.059 in (1.5 mm), General Industry

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.5250000000000004
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.059
• Fluid Orifice Size (mm): 1.5
• Gun Type: Compliant Gun
• Includes: High Wear Packing, Carbide Needle Assembly, Carbide Tip Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

GG 204000

MASTIC GUN,SPRAY

Graco 204000 Heavy Fluid Air Spray Gun, Series J with 1/4 size cap and tip (round type)

GG 206515

GG 21662-00

GG 235457

GG 246506

GG 24F202

AIRPRO GUN, PRESSURE, CONV

Graco 24F202 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, Air Brush Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Air Brush
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.11
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.1

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 24J601

FINEX GUN, GRACO

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun, conventional, 0.039 in (1.0 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels – ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

• Aluminum cup is included with the gun
• Cup swivels for spraying in small spaces
• Light trigger pull for operator comfort
• Integrated air inlet adjustment (cheater) valve

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Side-Cup Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.10
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 1.0

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 24U188

AIRPRO GUN, STAINLESS, CONV

Graco 24U188 AirPro Air Spray Pressure Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, SST Tip, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Metal
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 258971

RS GUN, ASM, INT MIX, CHOP

Graco 258971 RS Internal Mix Chop Gun with Cutter and Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. Its lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It's available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun's revolutionary design and industry-first features can help boost your company's bottom line.

• Makes production easier

  Simple, quick start up and shut down

  Quick tool-less blade change

  No need to adjust needle settings after maintenance

  • Improves product quality

    Lightweight cutter gives better chopping control

    Easy one-hand cutter speed control

    Superior spray pattern

    • Improves operator comfort for increased job satisfaction

      Lighter, ergonomic gun reduces fatigue

      Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

      No problems soaking the RS Gun in solvents overnight

      
      

      • Model: RS
      • Chop Gun Type: With Cutter
      • Compatible Material: Polyester Resin, Gel-Coat
      • For Use With: FRP System
      • Gun Type: Chop Gun
      • Gun Weight (g): 1116
      • Gun Weight (kg): 1.12
      • Gun Weight (lb): 2.46
      • Gun Weight (oz): 39.36
      • Includes: CST443 Tip, Cutter
      • Maximum Air Pressure (bar): 8.6
      • Maximum Air Pressure (kg/cm²): 8.79
      • Maximum Air Pressure (kPa): 860
      • Maximum Air Pressure (psi): 125
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Minimum Air Inlet Pressure (bar): 5.5
      • Minimum Air Inlet Pressure (kPa): 550
      • Minimum Air Inlet Pressure (psi): 80
      • Mix Type: Internal Mix

GG 26B504

PERFORMAA GUN, AA, 1500, GF, ACID

Graco 26B504 PerformAA 1500 Air Assist Gun with Gen Finish air cap, plastic seat and St Steel ball

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

• High quality 1500 psi air assist spray gun
• General finishing air cap for a wide range of materials
• Plastic seat and stainless steel ball for acid material compatibility
• Trigger pull force is ultra-light, reducing operator fatigue and muscle stress

• Model: PerformAA 15

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Acid Catalyzed, Lacquer, Latex, Plural Component Materials, Solventborne, Solventborne Paints, Topcoats, Varnish
• Compatible Spray Tip: AXM, AXF

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Clicking
• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 453
• Gun Weight (kg): 0.45
• Gun Weight (lb): 1
• Gun Weight (oz): 16
• Gun Weight with Tip and Guard (g): 480
• Gun Weight with Tip and Guard (oz): 17.1
• Gun Weight without Tip and Guard (g): 460

• Gun Weight without Tip and Guard (oz): 16.2

• Includes: Plastic Seat, Indexing Air Cap, Tip of Choice, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 105
• Maximum Fluid Pressure (kPa): 10500
• Maximum Fluid Pressure (MPa): 10.5
• Maximum Fluid Pressure (psi): 1500
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Maximum Fluid Pressure (bar): 105
• Maximum Fluid Pressure (kPa): 10500
• Maximum Fluid Pressure (MPa): 10.5
• Maximum Fluid Pressure (psi): 1500
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Overall Height (cm): 20.8
• Overall Height (in): 8.2
• Overall Height (mm): 208
• Overall Length (cm): 15.25
• Overall Length (in): 6
• Overall Length (mm): 152

• Product Type: Spray Gun

GG 26B505

PERFORMAA GUN, AA, 1500, LV, SWIVEL

Graco 26B505 PerformAA 1500 Air Assist Gun with Low Viscosity air cap, light trigger pull and fluid swivel

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

• High quality 1500 psi air assist spray gun
• Low viscosity air cap for even dispersion of light materials
• Includes a low profile fluid swivel
• Trigger pull force is ultra-light, reducing operator fatigue and muscle stress

• Model: PerformAA 15

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
• Compatible Spray Tip: AXM, AXF

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Clicking
• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 453
• Gun Weight (kg): 0.45
• Gun Weight (lb): 1
• Gun Weight (oz): 16
• Gun Weight with Tip and Guard (g): 480
• Gun Weight with Tip and Guard (oz): 17.1
• Gun Weight without Tip and Guard (g): 460

• Gun Weight without Tip and Guard (oz): 16.2

• Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 105
• Maximum Fluid Pressure (kPa): 10500
• Maximum Fluid Pressure (MPa): 10.5
• Maximum Fluid Pressure (psi): 1500
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Maximum Fluid Pressure (bar): 105
• Maximum Fluid Pressure (kPa): 10500
• Maximum Fluid Pressure (MPa): 10.5
• Maximum Fluid Pressure (psi): 1500
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Overall Height (cm): 20.8
• Overall Height (in): 8.2
• Overall Height (mm): 208
• Overall Length (cm): 15.25
• Overall Length (in): 6
• Overall Length (mm): 152

• Product Type: Spray Gun

GG 26B509

PERFORMAA GUN, AA, 5000, GF, HIGH-FLOW

Graco 26B509 PerformAA 5000 Air Assist Gun with General Finishing air cap and no fluid filter

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

• High quality 5000 psi air assist spray gun
• General finishing air cap for a wide range of materials
• No fluid filter for high flow applications
• Clicking fan pattern adjustment knob for accurate adjustment

• Model: PerformAA 50

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Solventborne Paints, Urethane, UV Coating, Varnish
• Compatible Spray Tip: AXM, AXF

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Clicking
• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 453
• Gun Weight (kg): 0.45
• Gun Weight (lb): 1
• Gun Weight (oz): 16
• Gun Weight with Tip and Guard (g): 490
• Gun Weight with Tip and Guard (oz): 17.4
• Gun Weight without Tip and Guard (g): 460

• Gun Weight without Tip and Guard (oz): 16.2

• Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Overall Height (cm): 20.8
• Overall Height (in): 8.2
• Overall Height (mm): 208
• Overall Length (cm): 17.25
• Overall Length (in): 6.8
• Overall Length (mm): 173

• Product Type: Spray Gun