Transfer

View as Grid List

Sort by

Display items per page

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD, STD

GG EC1B41

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD, STD

Graco EC1B41 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand

E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.

Advanced model lets you easily connect and manage multiple pumps with a single control module.
Minimal pulsation at changeover provides a more consistent finish.
Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.
Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
Meets requirements of these approval agencies: ATEX, FM, IECEx

Fluid Inlet Size (in): 1.5
Fluid Inlet Size (mm): 38.1
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: Tri-Clamp
Fluid Inlet Type: Tri-Clamp

Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 3.81
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: Tri-Clamp
Fluid Section Type: 4-Ball, Sealed Bellows
Includes: Advanced Control Input, Stand
Maximum Continuous Cycle Rate (CPM): 20
Maximum Operating Temperature (°C): 40
Maximum Operating Temperature (°F): 104
Maximum Voltage (V ac): 480
Maximum Working Pressure (bar): 26
Maximum Working Pressure (kPa): 2600
Maximum Working Pressure (MPa): 2.6
Maximum Working Pressure (psi): 377
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Voltage (V ac): 380
Overall Depth (cm): 50.5
Overall Depth (in): 19.88
Overall Depth (mm): 505
Overall Height (cm): 147.3
Overall Height (in): 57.99
Overall Height (mm): 1473
Overall Width (cm): 43.2
Overall Width (in): 17
Overall Width (mm): 432

$20,860.00

E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND

GG EC3D41

E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND

E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility. Advanced model lets you easily connect and manage multiple pumps with a single control module. Quiet electric motor exceeds OSHA sound regulations, meaning happier operators and better results. Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne. Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second. Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.

$30,230.00

E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM

GG EMC4163

E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM

E-Flo SP 20L 3 in (7.6 cm) Supply, 100cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 240V The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data. Improve process and system performance Advanced material control Significant energy savings Eliminate compressed air usage Extremely quiet motor Prevent downtime Lower maintenance costs

$40,400.00

E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM

GG EMC8164

E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM

Graco EMC8164 E-Flo SP 20L 3 in. Supply, 200cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 480V

The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data.

Improve process and system performance
Advanced material control
Significant energy savings
Extremely quiet motor
Prevent downtime
Lower maintenance costs

Display Type: ADM
Drum Size (Gal): 5
Drum Size (L): 20

Maximum Working Pressure (psi): 3900
Platen Material: Stainless Steel
Platen Size (Gal): 5
Platen Size (L): 20
Platen Style: Single Wiper
Pump Material: Stainless Steel Maxlife
Pump Size (cc): 200
Pump Type: Check-Mate
Ram Post Diameter (in): 3

$52,990.00

HIGH-FLO PUMP, 4000, LN DT, SLD, TRI

GG JS33B8

HIGH-FLO PUMP, 4000, LN DT, SLD, TRI

High-Flo 4-Ball Pump, SST, 3.3:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent DataTrak tracks material usage, monitors and protects your pump

$36,180.00

HIGH-FLO PUMP, XL34/2000, LN, SLD, TRI

GG JS35A8

HIGH-FLO PUMP, XL34/2000, LN, SLD, TRI

High-Flo 4-Ball Pump, SST, 3.5:1, Low Noise XL, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent

$19,560.00

HIGH-FLO PUMP, XL34/2000, LN, DT, SLD, TRI

GG JS35B8

HIGH-FLO PUMP, XL34/2000, LN, DT, SLD, TRI

Graco JS35B8 High-Flo 4-Ball Pump, SST, 3.5:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent
DataTrak tracks material usage, monitors and protects your pump

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, DataTrak Monitor, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 10.6
Maximum Flow Rate (L/min): 40
Maximum Operating Temperature (°C): 60
Maximum Operating Temperature (°F): 140
Maximum Working Pressure (bar): 24.1
Maximum Working Pressure (kPa): 2410
Maximum Working Pressure (MPa): 2.4
Maximum Working Pressure (psi): 350
Motor Type: Low Noise with DataTrak
Portable: Non-Portable
Pump Ratio: 3.5:1

$21,940.00

HIGH-FLO PUMP, 2200/1000, LOW N, SLD, TRI

GG JS40L8

HIGH-FLO PUMP, 2200/1000, LOW N, SLD, TRI

Graco JS40L8 High-Flo 4-Ball Pump, SST, 4:1, Low Noise Exhaust, Sealed SST Lower, Tri-Clamp Fittings, Ultralife Rod/Cylinder

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1-1/2
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 16.9
Maximum Flow Rate (L/min): 63.97
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 28
Maximum Working Pressure (kPa): 2800
Maximum Working Pressure (MPa): 2.8
Maximum Working Pressure (psi): 400
Motor Type: Low Noise NXT
Portable: Non-Portable
Pump Ratio: 4:1

$15,740.00

HIGH-FLO PUMP, 3000, LN, SLD, TRI

GG JS44A8

HIGH-FLO PUMP, 3000, LN, SLD, TRI

High-Flo 4-Ball Pump, SST, 4.4:1, Low Noise XL, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent

$32,210.00

HIGH-FLO PUMP, 3000, LN DT, SLD, TRI

GG JS44B8

HIGH-FLO PUMP, 3000, LN DT, SLD, TRI

Graco JS44B8 High-Flo 4-Ball Pump, SST, 4.4:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent
DataTrak tracks material usage, monitors and protects your pump

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, DataTrak Monitor, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 15.9
Maximum Flow Rate (L/min): 60
Maximum Operating Temperature (°C): 60
Maximum Operating Temperature (°F): 140
Maximum Working Pressure (bar): 30.3
Maximum Working Pressure (kPa): 3030
Maximum Working Pressure (MPa): 3
Maximum Working Pressure (psi): 440
Motor Type: Low Noise with DataTrak
Portable: Non-Portable
Pump Ratio: 4.4:1

$35,290.00

HIGH-FLO PUMP, XL34/1500, LN, OPN, NPT

GG JS45A9

HIGH-FLO PUMP, XL34/1500, LN, OPN, NPT

High-Flo 4-Ball Pump, SST, 4.5:1, Low Noise XL, Open Wet Cup SST Lower, Ultralife Rod/Cylinder, NPT Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Rugged body armor, won’t rust or dent De-icing controls eliminate stalling Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints

$15,770.00

KING SPRAYER, 40:1, H-P, BF, HD, COMP

GG K40FH1

KING SPRAYER, 40:1, H-P, BF, HD, COMP

Graco K40FH1 King 40:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, XTR-5+, 50 ft (15 m) Hose, 6 ft (1.8 m) Whip

High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application.

Application: Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

Simple Maintenance
- Improved Icing Performance
  - Less Pulsation
    With more than 145% higher exhaust capacity in the air valve, you&prime, ll achieve a faster, smoother changeover.
    Eliminating the &Prime, wink&Prime, in your pattern - it is a difference you will feel.
  - New Air Motor
    Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
  Air Inlet Size (in): 1
  Air Inlet Thread Gender: Female
  Air Inlet Thread Type: NPT
  Approved for Hazardous Locations: Yes
  Compatible Material: Protective Coating
  Control Type: Fixed Ratio
  Convertible: Non-Convertible
  Features: Exposed Thermally Isolated Poppets, De-Icing Valve, Tool Box, Trusted XL Motor, Protective Rod Guard, Robust Air Controls, Xtreme Lowers, Improved Siphon Hose, Cart With Wheels
  Fluid Inlet Size (in): 1-1/4
  Fluid Inlet Size (mm): 31.75
  Fluid Inlet Thread Gender: Male
  Fluid Inlet Thread Type: NPT
  Fluid Outlet Size (in): 1/2
  Fluid Outlet Size (mm): 12.7
  Fluid Outlet Thread Gender: Female
  Fluid Outlet Thread Type: NPT
  Frame Configuration: Heavy-Duty Cart
  Gun Model: XTR-5
  Includes: Pump, Lower, Motor, Standard Filter, Heavy Duty Cart, Air Controls, Siphon Kit, Hose, Gun
  Lower Type: Integrated Filter
  Material Application: Paints, Primers
  Maximum Air Inlet Pressure (psi): 150
  Maximum Air Pressure (bar): 7
  Maximum Air Pressure (kPa): 700
  Maximum Air Pressure (psi): 100
  Maximum Fluid Working Pressure (psi): 3800
  Maximum Sound Pressure Level (dB(A)): 81.48

$12,110.00

KING SPRAYER, 45:1, H-P, BF, HD, COMP

GG K45FH1

KING SPRAYER, 45:1, H-P, BF, HD, COMP

Graco K45FH1 King 45:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, XTR-5+, 50 ft (15 m) Hose, 6 ft (1.8 m) Whip

Application: Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

Simple Maintenance
- Improved Icing Performance
  - Less Pulsation
    With more than 145% higher exhaust capacity in the air valve, you&prime, ll achieve a faster, smoother changeover.
    Eliminating the &Prime, wink&Prime, in your pattern - it is a difference you will feel.
  - New Air Motor
    Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
  Air Inlet Size (in): 1
  Air Inlet Thread Gender: Female
  Air Inlet Thread Type: NPT
  Approved for Hazardous Locations: Yes
  Compatible Material: Protective Coating
  Control Type: Fixed Ratio
  Convertible: Non-Convertible
  Features: Exposed Thermally Isolated Poppets, De-Icing Valve, Tool Box, Trusted XL Motor, Protective Rod Guard, Robust Air Controls, Xtreme Lowers, Improved Siphon Hose, Cart With Wheels
  Fluid Inlet Size (in): 1-1/4
  Fluid Inlet Size (mm): 31.75
  Fluid Inlet Thread Gender: Male
  Fluid Inlet Thread Type: NPT
  Fluid Outlet Size (in): 1/2
  Fluid Outlet Size (mm): 12.7
  Fluid Outlet Thread Gender: Female
  Fluid Outlet Thread Type: NPT
  Frame Configuration: Heavy-Duty Cart
  Gun Model: XTR-5
  Includes: Pump, Lower, Motor, Standard Filter, Heavy Duty Cart, Air Controls, Siphon Kit, Hose, Gun
  Lower Type: Integrated Filter
  Material Application: Paints, Primers
  Maximum Air Inlet Pressure (psi): 150
  Maximum Air Pressure (bar): 7
  Maximum Air Pressure (kPa): 700
  Maximum Air Pressure (psi): 100
  Maximum Fluid Working Pressure (psi): 4500
  Maximum Sound Pressure Level (dB(A)): 81.48

$12,770.00

KING SPRAYER, 60:1, H-P, BF, HD, BARE

GG K60FH0

KING SPRAYER, 60:1, H-P, BF, HD, BARE

Graco K60FH0 King 60:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit

Application: Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

Simple Maintenance
- Improved Icing Performance
  - Less Pulsation
    With more than 145% higher exhaust capacity in the air valve, you&prime, ll achieve a faster, smoother changeover.
    Eliminating the &Prime, wink&Prime, in your pattern - it is a difference you will feel.
  - New Air Motor
    Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
  Approved for Hazardous Locations: Yes
  Compatible Material: Protective Coating
  Control Type: Fixed Ratio
  Convertible: Non-Convertible
  Features: Exposed Thermally Isolated Poppets, De-Icing Valve, Tool Box, Trusted XL Motor, Protective Rod Guard, Robust Air Controls, Xtreme Lowers, Improved Siphon Hose, Cart With Wheels
  Fluid Inlet Size (in): 1-1/4
  Fluid Inlet Size (mm): 31.75
  Fluid Inlet Thread Type: NPT
  Fluid Outlet Size (in): 1/2
  Fluid Outlet Size (mm): 12.7
  Fluid Outlet Thread Type: NPT
  Frame Configuration: Heavy-Duty Cart
  Gun Model: No Applicator
  Includes: Pump, Lower, Motor, Standard Filter, Heavy Duty Cart, Air Controls, Siphon Kit
  Lower Type: Integrated Filter
  Material Application: Paints, Primers
  Maximum Air Inlet Pressure (psi): 150
  Maximum Fluid Working Pressure (psi): 6000
  Maximum Sound Pressure Level (dB(A)): 81.48
  Maximum Tip Size (in): Variable
  Maximum Working Pressure (bar): 417
  Maximum Working Pressure (kPa): 41700
  Maximum Working Pressure (MPa): 41.7
  Maximum Working Pressure (psi): 6000
  Motor Type: XL High Performance
  Number of Guns: 0

$12,770.00

KING SPRAYER, 70:1, H-P, BF, HD, COMP

GG K70FH1

KING SPRAYER, 70:1, H-P, BF, HD, COMP

Graco K70FH1 King 70:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, XTR-7+, 50 ft (15 m) Hose, 6 ft (1.8 m) Whip

Application: Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatings

Simple Maintenance
- Improved Icing Performance
  - Less Pulsation
    With more than 145% higher exhaust capacity in the air valve, you&prime, ll achieve a faster, smoother changeover.
    Eliminating the &Prime, wink&Prime, in your pattern - it is a difference you will feel.
  - New Air Motor
    Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
  Air Inlet Size (in): 1
  Air Inlet Thread Gender: Female
  Air Inlet Thread Type: NPT
  Approved for Hazardous Locations: Yes
  Compatible Material: Protective Coating
  Control Type: Fixed Ratio
  Convertible: Non-Convertible
  Features: Exposed Thermally Isolated Poppets, De-Icing Valve, Tool Box, Trusted XL Motor, Protective Rod Guard, Robust Air Controls, Xtreme Lowers, Improved Siphon Hose, Cart With Wheels
  Fluid Inlet Size (in): 1-1/4
  Fluid Inlet Size (mm): 31.75
  Fluid Inlet Thread Gender: Male
  Fluid Inlet Thread Type: NPT
  Fluid Outlet Size (in): 1/2
  Fluid Outlet Size (mm): 12.7
  Fluid Outlet Thread Gender: Female
  Fluid Outlet Thread Type: NPT
  Frame Configuration: Heavy-Duty Cart
  Gun Model: XTR-7
  Includes: Pump, Lower, Motor, Standard Filter, Heavy Duty Cart, Air Controls, Siphon Kit, Hose, Gun
  Lower Type: Integrated Filter
  Material Application: Paints, Primers
  Maximum Air Inlet Pressure (psi): 150
  Maximum Air Pressure (bar): 7
  Maximum Air Pressure (kPa): 700
  Maximum Air Pressure (psi): 100
  Maximum Fluid Working Pressure (psi): 7250
  Maximum Sound Pressure Level (dB(A)): 81.48

$14,210.00

DURA-FLO PUMP, 3400/1000

GG P06DCK

DURA-FLO PUMP, 3400/1000

Graco P06DCK Dura-Flo NXT 2-Ball Piston Pump, 6:1, De-Icing Exhaust Motor, CS, UHM with Leather Packings

Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost

Model: Dura-Flo
Series: 2-Ball

Application: Supply
Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
Fluid Outlet Size (in): 1-1/2
Fluid Outlet Size (mm): 38.1
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball
Includes: Carbon Steel Pump, De-Icing Exhaust Motor, UHMW / Leather Packings
Material: Carbon Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 60
Maximum Flow Rate (GPM): 17.4
Maximum Flow Rate (L/min): 65.87
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 43
Maximum Working Pressure (kPa): 4300
Maximum Working Pressure (MPa): 4.3
Maximum Working Pressure (psi): 620
Motor Type: De-Icing NXT
Mount Type: Wall or Stand Mount
Portable: Non-Portable
Pump Ratio: 6:1

$12,950.00

DURA-FLO PUMP, 3400/1000

GG P06ECK

DURA-FLO PUMP, 3400/1000

Dura-Flo NXT 2-Ball Piston Pump, 6:1, De-Icing Exhaust Motor, DataTrak, CS, UHM with Leather Packings

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak

$14,340.00

DURA-FLO PUMP, 6500/580

GG P22LSM

DURA-FLO PUMP, 6500/580

21:1 - 580cc Dura-Flo Pump with NXT6500 Air Motor, MaxLife Stainless Steel Construction

Graco’s Xtreme and Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

NXT Air Motor

Modular design for easier maintenance
Rugged body armor won’t rust or dent
Highest technology air motor on the market
Low Noise exhaust style

Modular Air Valve

De-icing controls standard
Up to 50% quieter than previous models
Modular air valve - reduces stalling, easy-to-repair

Optional Integrated Air Controls

Lockable easy-turn regulator
Front-mounted for convenient access
Compact and modular
Built-in filtration

Optional DataTrak™ Control

Runaway protection
Pump diagnostics
Material usage

$20,660.00

DURA-FLO PUMP, 6500/580

GG P23MCD

DURA-FLO PUMP, 6500/580

Graco P23MCD Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, DataTrak, CS, 3 PTFE / 2 Leather Packings

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost

Model: Dura-Flo
Series: 2-Ball

Application: Supply
Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
Fluid Outlet Size (in): 1-1/2
Fluid Outlet Size (mm): 38.1
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball
Includes: Carbon Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 3 PTFE/2 Leather Packings
Material: Carbon Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 60
Maximum Flow Rate (GPM): 9.2
Maximum Flow Rate (L/min): 34.83
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 164
Maximum Working Pressure (kPa): 16400
Maximum Working Pressure (MPa): 16.4
Maximum Working Pressure (psi): 2380
Motor Type: Low Noise NXT with DataTrak
Mount Type: Wall or Stand Mount
Portable: Non-Portable
Pump Ratio: 23:1

$17,180.00

XTREME PUMP, 3400/290, NF

GG P25DC1

XTREME PUMP, 3400/290, NF

Xtreme NXT 2-Ball Piston Pump, 25:1, De-Icing Exhaust Motor, CS

Graco's Xtreme pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

$9,620.00

XTREME PUMP, 3400/290, NF

GG P25LC1

XTREME PUMP, 3400/290, NF

Graco P25LC1 Xtreme NXT 2-Ball Piston Pump, 25:1, Low Noise Exhaust, CS

Graco&prime, s Xtreme pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost

Model: Xtreme
Series: 2-Ball

Air Inlet Size (in): 3/4
Air Inlet Size (mm): 19.05
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Supply
Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball
Includes: Carbon Steel Pump, Low Noise Exhaust Motor
Material: Carbon Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 60
Maximum Flow Rate (GPM): 4.6
Maximum Flow Rate (L/min): 17.41
Maximum Operating Temperature (°C): 82
Maximum Operating Temperature (°F): 180
Maximum Working Pressure (bar): 262
Maximum Working Pressure (kPa): 26200
Maximum Working Pressure (MPa): 26.2
Maximum Working Pressure (psi): 3800
Motor Type: Low Noise NXT
Mount Type: Wall or Stand Mount
Portable: Non-Portable
Pump Ratio: 25:1

$9,740.00

DURA-FLO PUMP, 3400/220

GG P30DSE

DURA-FLO PUMP, 3400/220

Graco P30DSE Dura-Flo NXT 2-Ball Piston Pump, 30:1, De-Icing Exhaust Motor, SST, 4 Leather / 1 PTFE Packings

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost

Model: Dura-Flo
Series: 2-Ball

Air Inlet Size (in): 0.7506
Air Inlet Size (mm): 19.05
Application: Supply
Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball
Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 4 Leather/1 PTFE Packings
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 60
Maximum Flow Rate (GPM): 3.4
Maximum Flow Rate (L/min): 12.87
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 105
Maximum Working Pressure (kPa): 10500
Maximum Working Pressure (MPa): 10.5
Maximum Working Pressure (psi): 1520
Motor Type: De-Icing NXT
Mount Type: Wall or Stand Mount
Portable: Non-Portable
Pump Ratio: 30:1

$13,510.00

DURA-FLO PUMP, 3400/220

GG P30LSE

DURA-FLO PUMP, 3400/220

Dura-Flo NXT 2-Ball Piston Pump, 30:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE Packings

$14,210.00

DURA-FLO PUMP, 3400/220

GG P30LSS

DURA-FLO PUMP, 3400/220

Graco P30LSS 30:1 - 220cc Dura-Flo Pump with NXT 3400 Air Motor, Severe Duty Stainless Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.

Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer

NXT 3400 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
220cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
Replaceable Seat
Minimizes service costs
Cast Outlet and Inlet Housing
- Optional DataTrak™ Control
  Ambient/Warm Melt/Hot Melt: Ambient
  Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  Compatible Material: CARC, High Solids, Metallics, Solvent borne, Stains, Varnish, Xirallic
  Fluid Inlet Size (in): 2
  Fluid Inlet Size (mm): 50.8000
  Fluid Inlet Thread Gender: Female
  Fluid Inlet Thread Type: NPT
  Fluid Outlet Size (in): 1
  Fluid Outlet Size (mm): 25.4000
  Fluid Outlet Thread Gender: Female
  Fluid Outlet Thread Type: NPT
  Includes: Motor, Lower, Rod Tie, Collar Coupling, Adaptor, Nut Coupling, Nut Hex, Wrench
  Material: Stainless Steel
  Maximum Working Pressure (bar): 219
  Maximum Working Pressure (kPa): 21900
  Maximum Working Pressure (MPa): 21.9
  Maximum Working Pressure (psi): 3170
  Power Type: Pneumatic
  Pump Ratio: 30:1

$14,490.00

DURA-FLO PUMP, 3400/220

GG P30MSE

DURA-FLO PUMP, 3400/220

Graco P30MSE Dura-Flo NXT 2-Ball Piston Pump, 30:1, Low Noise Exhaust Motor, DataTrak, SST, 4 Leather / 1 PTFE Packings

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost

Model: Dura-Flo
Series: 2-Ball

Air Inlet Size (in): 0.7506
Air Inlet Size (mm): 19.05
Application: Supply
Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Type: 2-Ball
Includes: Stainless Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 4 Leather/1 PTFE Packings
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 60
Maximum Flow Rate (GPM): 3.4
Maximum Flow Rate (L/min): 12.87
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 105
Maximum Working Pressure (kPa): 10500
Maximum Working Pressure (MPa): 10.5
Maximum Working Pressure (psi): 1520
Motor Type: Low Noise NXT with DataTrak
Mount Type: Wall or Stand Mount
Portable: Non-Portable
Pump Ratio: 30:1

$14,780.00

Refine