Spray Guns - Manual

View as Grid List
Sort by
Display items per page
Trophy Gun Pressure/Siphon, 1.4Cx14Conv

Trophy Gun Pressure/Siphon, 1.4Cx14Conv

BB 2465-14CN-14V0

BB 2465-14CN-14V0

Trophy Gun Pressure/Siphon, 1.4Cx14Conv
$1,083.00
Trophy Gun Pressure/Siphon, 1.8X32Hvlp

Trophy Gun Pressure/Siphon, 1.8X32Hvlp

BB 2465-18HV-32SS

BB 2465-18HV-32SS

Trophy Gun Pressure/Siphon, 1.8X32Hvlp
$921.00
Compact Mini Hvlp 1.2

Compact Mini Hvlp 1.2

DD COMM-HS1-12

DD COMM-HS1-12

Compact Mini Hvlp 1.2
Call for pricing
Compact Mini Transtech1.2

Compact Mini Transtech1.2

DD COMM-TS1-12

DD COMM-TS1-12

Compact Mini Transtech1.2
Call for pricing
STELLAIR ACE GUN, COMPLIANT, .055, WITH HOSE

STELLAIR ACE GUN, COMPLIANT, .055, WITH HOSE

GG 2005975

GG 2005975

STELLAIR ACE GUN, COMPLIANT, .055, WITH HOSE

Stellair ACE Air Spray Gun with Hose, .055 in (1.4 mm) Nozzle Size The unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer. Whether you’re a custom shop or high volume factory, Stellair ACE brings all-star atomization, carbon fiber construction and ergonomics to metal, plastic, and wood finishing. Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations. Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions. Air cap stays clean while delivering atomization that results in industry leading finish quality. Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain. Hoses with swivel attachments move with you at any angle, preventing tripping and injury. Trigger can be removed with the push of a button and can be used to remove the fluid cartridge.
$893.00
GUN, SPRAY, UNDERCOAT

GUN, SPRAY, UNDERCOAT

GG 234237

GG 234237

GUN, SPRAY, UNDERCOAT

Graco 234237 4-Finger Silver Gun with Tip Guard/Tip - 4,500 psi (310 bar) x 3/8 NPT(f) Inlet

Application: Ideal for undercoating and rust-proofing application in medium-sized shops, municipal garages and higher-volume in-plant applications.
  • Up to 18,000 psi (1,242 bar)
  • Must order 155570 adapter and 239663 straight swivel to accommodate gun to 1/4 in (mbe) hose.


  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Gender: Male
  • Air Inlet Thread Type: NPSM
  • Body Material: Aluminum
  • Compatible Material: Undercoating, Rustproofing
  • Component A Inlet Size (cm): 0.635
  • Component A Inlet Size (in): 1/4
  • Component A Inlet Size (mm): 6.35
  • Component A Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.043
  • Fluid Orifice Size (in): 0.017
  • Fluid Orifice Size (mm): 0.43
  • For Use With: Undercoating and Rustproofing
  • Gun Activation: Manual
  • Gun Type: Airless Gun
  • Maximum Fluid Pressure (bar): 345
  • Maximum Fluid Pressure (kPa): 34500
  • Maximum Fluid Pressure (MPa): 34.5
  • Maximum Fluid Pressure (psi): 5000
  • Maximum Fluid Temperature (°C): 50
  • Maximum Fluid Temperature (°F): 120
  • Maximum Fluid Pressure (bar): 345
  • Maximum Fluid Pressure (kPa): 34500
  • Maximum Fluid Pressure (MPa): 34.5
  • Maximum Fluid Pressure (psi): 5000
  • Maximum Fluid Temperature (°C): 50
  • Maximum Fluid Temperature (°F): 120
$663.00
AIRPRO GUN, EFX, HITECH, .028 Obsolete

AIRPRO GUN, EFX, HITECH, .028 Obsolete

GG 24B866

GG 24B866

AIRPRO GUN, EFX, HITECH, .028

Graco 24B866 AirPro EFX Auto Air Spray Gun with Manifold, HiTEch, 0.028 inch (0.7 mm) Nozzle, SST Tip, Ultra Precision Fluid Adjust Knob

The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications.

  • Aircaps and nozzles deliver superior, precision spray performance
  • Precision fluid adjustment with a micrometer-telescoping knob
  • High wear components designed for abrasive materials


  • Model: AirPro
  • Series: EFX
  • Applicator Type: Automatic
  • Bleed Type: Bleeder
  • Body Material: Stainless Steel
  • Compatible Material: Ceramics, Enamel, Fast-Set, High Solids, Solvent borne, Waterborne
  • Component Type: Single Component
  • Feed Type: Pressure Feed
  • Fluid Adjustment Knob: Ultra Precision
  • Fluid Orifice Size (cm): 0.07
  • Fluid Orifice Size (in): 0.028
  • Fluid Orifice Size (mm): 0.7
  • Gun Activation: Automatic
  • Gun Type: HiTech
  • Gun Weight (kg): 0.59
  • Gun Weight (lb): 1.3
  • Includes: Air Cap with Pin, Fluid Adjustment Knob, Manifold, Needle/Nozzle Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Flow Rate @ PSI (oz/min): 3.4
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 49
  • Maximum Fluid Temperature (°F): 120
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 49
  • Maximum Fluid Temperature (°F): 120
  • Minimum Flow Rate @ PSI (oz/min): 0.3
  • Needle Tip Material: Stainless Steel
  • Overall Height (cm): 2.6
  • Overall Height (in): 1
  • Overall Height (mm): 25
  • Overall Length (cm): 12
  • Overall Length (in): 4.9
  • Overall Length (mm): 124
  • Overall Width (cm): 3.8
  • Overall Width (in): 1
  • Overall Width (mm): 25
  • Purge Method: Air
$4,100.00
AIRPRO GUN, WB, HVLP, .055 Obsolete

AIRPRO GUN, WB, HVLP, .055 Obsolete

GG 288969

GG 288969

AIRPRO GUN, WB, HVLP, .055

Graco 288969 AirPro Air Spray Pressure Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Waterborne
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, WB, COMPLIANT, .055 Obsolete

AIRPRO GUN, WB, COMPLIANT, .055 Obsolete

GG 288972

GG 288972

AIRPRO GUN, WB, COMPLIANT, .055

Graco 288972 AirPro Air Spray Pressure Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Waterborne
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP Obsolete

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP Obsolete

GG 289015

GG 289015

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289015 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP Obsolete

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP Obsolete

GG 289017

GG 289017

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055 Obsolete

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055 Obsolete

GG 289020

GG 289020

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055

Graco 289020 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
FINEX GUN, 2, HVLP, PRESS, 1.8

FINEX GUN, 2, HVLP, PRESS, 1.8

GG 289250

GG 289250

FINEX GUN, 2, HVLP, PRESS, 1.8

Graco 289250 Finex Air Spray Pressure Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.071
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.37
  • Gun Weight (lb): 0.8
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$318.00
XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

GG XTR522

GG XTR522

XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

XTR5+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you'll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer. Designed to conquer the toughest protective coatings. Self-locking needle design for faster rebuilds XHD RAC tip provides exceptional life, pattern and finish Easily remove and clean gun filter with trigger guard integrated wrench XTR5+ maximum fluid pressure: 5000psi (345 bar, 34.5 MPa) Insulated handle for sprayer comfort
$534.00
W71-02N 1.0mm Spray Gun

W71-02N 1.0mm Spray Gun

IW 3035

IW 3035

W71-02N 1.0mm Spray Gun
$361.52
WS-200, WS200SP-1201 (1.2)

WS-200, WS200SP-1201 (1.2)

IW 4695

IW 4695

WS-200, WS200SP-1201 (1.2)
$908.59
Picture of New Trophy Touch-Up

New Trophy Touch-Up

BB 54-6136

BB 54-6136

New Trophy Touch-Up
$92.50
Picture of Dv1 C1+ & C2+ Digi Gravity Gun Kit

Dv1 C1+ & C2+ Digi Gravity Gun Kit

DD 704521

DD 704521

Genuine Binks replacement part.
  • Binks 704521 component.
  • Replacement Part
$1,280.00
Picture of Satajet X5500 Hvlp, 1.1 Needle, 0 Pattern

Satajet X5500 Hvlp, 1.1 Needle, 0 Pattern

SATA 1061936

SATA 1061936

Satajet X5500 Hvlp, 1.1 Needle, 0 Pattern
Call for pricing
Picture of Minijet 4400B HVLP Gun, 1.0 w/RPS Cups

Minijet 4400B HVLP Gun, 1.0 w/RPS Cups

SATA 204198

SATA 204198

Minijet 4400B HVLP Gun, 1.0 w/RPS Cups
Call for pricing
2100 Gun Assembly, 63Css-L/Air Nozz

2100 Gun Assembly, 63Css-L/Air Nozz

BB 2101-3100-0

BB 2101-3100-0

2100 Gun Assembly, 63Css-L/Air Nozz
$436.00
Trophy Gun Pressure/Siphon, 1.8X11Conv

Trophy Gun Pressure/Siphon, 1.8X11Conv

BB 2465-18CN-11S0

BB 2465-18CN-11S0

Trophy Gun Pressure/Siphon, 1.8X11Conv
$860.00
Spray Gun

Spray Gun

DD MBC-510-704E

DD MBC-510-704E

Spray Gun
$936.00
Stellair Gun, Conv. (.051), Adhesive

Stellair Gun, Conv. (.051), Adhesive

GG 2004173

GG 2004173

Stellair Gun, Conv. (.051), Adhesive

Stellair Air Spray Gun, Conventional, 0.051 in (1.3 mm), Adhesive, PEEK Tip
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Adhesive air cap atomizes waterborne and solvent borne adhesives and sealants.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
GUN, SPRAY, TEXTURE

GUN, SPRAY, TEXTURE

GG 245924

GG 245924

GUN, SPRAY, TEXTURE

Graco 245924 Texture Gun and Hopper

Double-handle and lightweight design provides maximum support and control for ceiling, wall and floor applications. Sprays acoustics, drywall mud, waterproofing materials, pool-deck sealant, stucco and most gravity-fed materials.

  • Lightweight Design - Weighs up to 35% less than comparable models to reduce operator fatigue
  • Angled, 1-1/2 Gallon (5.7 L) Capacity for longer spraying periods before refills
  • Handles on Both Sides - Rotates 180° for maximum control when spraying ceilings, walls and floors
  • Durable metal trigger with conveniently located trigger adjustment allows fine tuning of fluid output for a precise and consistent finish
  • Exclusive Hopper Clamp - No tools needed to attach hopper to gun


  • Model: TexSpray
  • Applicator Type: Manual
  • Compatible Material: Water-Based Material
  • Feed Type: Pressure Feed
  • For Use With: Texture Sprayer
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Airless Gun
  • Gun Weight (g): 990
  • Gun Weight (kg): 0.99
  • Gun Weight (lb): 2.1875
  • Gun Weight (oz): 35
  • Maximum Air Inlet Pressure (bar): 9
  • Maximum Air Inlet Pressure (kPa): 900
  • Maximum Air Inlet Pressure (MPa): 0.9
  • Maximum Air Inlet Pressure (psi): 130.5
  • Maximum Air Pressure (bar): 9
  • Maximum Air Pressure (kPa): 900
  • Maximum Air Pressure (MPa): 0.9
  • Maximum Air Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 4.9
  • Maximum Fluid Pressure (kPa): 490
  • Maximum Fluid Pressure (MPa): 0.49
  • Maximum Fluid Pressure (psi): 70
  • Maximum Fluid Pressure (bar): 4.9
  • Maximum Fluid Pressure (kPa): 490
  • Maximum Fluid Pressure (MPa): 0.49
  • Maximum Fluid Pressure (psi): 70
  • Overall Height (cm): 60.96
  • Overall Height (in): 24
  • Overall Height (mm): 609.6
  • Overall Length (cm): 45.085
  • Overall Length (in): 17.75
  • Overall Length (mm): 450.85
  • Overall Width (cm): 27.94
  • Overall Width (in): 11
  • Overall Width (mm): 279.4
  • Product Type: Spray Gun
$296.50
Refine
×
Manufacturer