Spray Guns - Manual
Trans-Tech Compact Gravity Gun & Cup
DD COM-G510G-14-02
DD COM-G510G-14-02
Trans-Tech Compact Gravity Gun & Cup
Call for pricing
Jga Spray Gun, 704Fx (1.1
DD JGA-510-704FX
DD JGA-510-704FX
JGA-510 series part.- Binks JGA-510 component.
- JGA-510 Series
$658.00
AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP
GG 289014
GG 289014
AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP
Graco 289014 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Specialty
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Gravity Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Call for pricing
FINEX GUN, GRACO, 2, HVLP, 1.4
GG 289239
GG 289239
FINEX GUN, GRACO, 2, HVLP, 1.4
Graco 289239 Finex Air Spray Gravity Feed Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
- Aircaps optimized for high quality spray performance
- Lightweight, ergonomic gun
- Lightest trigger pull in its category
- Model: Finex
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Body Material: Metal
- Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Standard Gravity Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (kg): 0.54
- Gun Weight (lb): 1.2
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
$246.50
FINEX GUN, 2, MINI, HVLP, 1.0
GG 289258
GG 289258
FINEX GUN, 2, MINI, HVLP, 1.0
Graco 289258 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.039 in (1.0 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
- Aircaps optimized for high quality spray performance
- Lightweight, ergonomic gun
- Lightest trigger pull in its category
- Model: Finex
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Body Material: Metal
- Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Mini Gravity Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.10
- Fluid Orifice Size (in): 0.039
- Fluid Orifice Size (mm): 1.0
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (kg): 0.4
- Gun Weight (lb): 0.9
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
$217.50
Satajet X5500 HVLP, 1.4, Standard Non-Digital, w/Eye Nozzle
SATA 1061910
SATA 1061910
Satajet X5500 HVLP, 1.4, Standard Non-Digital, w/Eye Nozzle
Call for pricing
Minijet 4400B HVLP Gun 0.8SR w/RPS Cup
SATA 198168
SATA 198168
Minijet 4400B HVLP Gun 0.8SR w/RPS Cup
Call for pricing
Trophy Gun Pressure/Siphon, 1.8X23Lvmp
BB 2465-18LV-23SS
BB 2465-18LV-23SS
Trophy LV gun variant.- Binks Trophy LV gun.
- Trophy LV
$921.00
FTX GUN, 2FINGER, RAC X 515, PKG
GG 288429
GG 288429
FTX GUN, 2FINGER, RAC X 515, PKG
Contractor FTx Airless Spray Gun, 2 Finger Trigger, RAC X 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 2-finger trigger and a RAC X 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$415.00
2100 Spray Gun Outfit
BB 98-2650
BB 98-2650
Genuine Binks part.- Binks 98-2650 component.
- Genuine Part
$569.00
STELLAIR GUN, COMP (.042)
GG 2004154
GG 2004154
STELLAIR GUN, COMP (.042)
Stellair Air Spray Gun, Compliant, 0.042 in (1.1 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
Trophy Gun Pressure/Siphon, 1.2X11 Conv
BB 2465-12CN-11S0
BB 2465-12CN-11S0
Trophy Gun Pressure/Siphon, 1.2X11 Conv
$860.00
Trophy Grav 1.8X12Conv
BB 2466-18CN-12SG
BB 2466-18CN-12SG
Trophy series gun.- Binks Trophy gun.
- Trophy Series
$890.00
PERFORMAA GUN, AA, 1500, GF, SWIVEL
GG 26B501
GG 26B501
PERFORMAA GUN, AA, 1500, GF, SWIVEL
PerformAA 1500 Air Assist Gun with General Finishing air cap and fluid swivel Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics. High quality 1500 psi air assist spray gun General finishing air cap for a wide range of materials Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice Indexing air cap for accurate spray position
$1,205.00
PERFORMAA GUN, AA, 5000, GF, SWIVEL
GG 26B511
GG 26B511
PERFORMAA GUN, AA, 5000, GF, SWIVEL
Graco 26B511 PerformAA 5000 Air Assist Gun with General Finishing air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
Advance Gravity Spraygun Kit Hvlp
DD ADV-G506-14
DD ADV-G506-14
Advance HD gravity feed spray gun.- Binks Advance gravity 1.4mm.
- Gravity Feed
$800.00
Advance Pressure Spraygun Kit Tt
DD ADV-P510-10
DD ADV-P510-10
Advance HD pressure gun.- Binks Advance gun.
- Advance HD Series
$774.00
Satajet 5000 B Hvlp 1.3 Spray Gun
SATA 210765
SATA 210765
Satajet 5000 B Hvlp 1.3 Spray Gun
Call for pricing
