Spray Guns - Manual

View as Grid List
Sort by
Display items per page
Picture of Spray Gun, Compact, Siphon, HVLP

Spray Gun, Compact, Siphon, HVLP

DD COM-PS507B-22-01

DD COM-PS507B-22-01

Spray Gun, Compact, Siphon, HVLP
Call for pricing
Picture of Jga Spray Gun, 9000Fw

Jga Spray Gun, 9000Fw

DD JGA-510-90FW

DD JGA-510-90FW

Precision fluid nozzle variant for JGA-510.
  • Binks JGA-510 fluid tip.
  • Fluid Nozzle
$658.00
Picture of Gun, Spray, Sst

Gun, Spray, Sst

GG 803351

GG 803351

Gun, Spray, Sst
$518.00
Picture of Pressure Spray Gun, COG-101, 1.2

Pressure Spray Gun, COG-101, 1.2

IW 7611

IW 7611

Pressure Spray Gun, COG-101, 1.2
$647.42
BB 1600-HF1310.jpg

Trophy Aa Handgun, 1600Psi & Aa10 + 1310 Tip

BB 1600-HF1310

BB 1600-HF1310

Trophy Aa Handgun, 1600Psi & Aa10 + 1310 Tip
$1,223.00
BB 2466-12HV-32SG.jpg

Trophy Grav 1.2X32Hvlp

BB 2466-12HV-32SG

BB 2466-12HV-32SG

Trophy / HVLP variant.
  • Binks HVLP gun.
  • HVLP Series
$890.00
BB 6143-0901-3.jpg

115 Gun 78Ss-78S

BB 6143-0901-3

BB 6143-0901-3

115 Gun 78Ss-78S
Call for pricing
BB 98-3170.jpg

Sv50 Hvlp Gravity Set

BB 98-3170

BB 98-3170

Sv50 Hvlp Gravity Set
$352.00
GG 2004145.jpg

STELLAIR GUN, CONV (.055)

GG 2004145

GG 2004145

STELLAIR GUN, CONV (.055)

Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
GG 2004159.jpg

STELLAIR GUN, HVLP (.055) SST TIP

GG 2004159

GG 2004159

STELLAIR GUN, HVLP (.055) SST TIP

Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), General Industry, SST Tip
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
GG 24B864.jpg

AIRPRO GUN, ASSY, EFX, HVLP, .043

GG 24B864

GG 24B864

AIRPRO GUN, ASSY, EFX, HVLP, .043

AirPro EFX Auto Air Spray Gun with Manifold, HVLP, 0.043 inch (1.1 mm) Nozzle, SST Tip, Indexing Fluid Adjust Knob The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications. Aircaps and nozzles deliver superior, precision spray performance Precision fluid adjustment with a micrometer-telescoping knob High wear components designed for abrasive materials Excellent fluid flow rate stability and repeatability
$2,050.00
GG 258852.jpg

RS GUN, ASM, EXT MIX, CHOP

GG 258852

GG 258852

RS GUN, ASM, EXT MIX, CHOP

RS External Mix Chop Gun with Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

  • Simple, quick start up and shut down
  • Quick tool-less blade change
  • No need to adjust needle settings after maintenance

Improves product quality

  • Lightweight cutter gives better chopping control
  • Easy one-hand cutter speed control
  • Superior spray pattern

Improves operator comfort for increased job satisfaction

  • Lighter, ergonomic gun reduces fatigue
  • Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
  • No problems soaking the RS Gun in solvents overnight

Saves material costs

  • Air Assist Containment (AAC®) standard on all RS Guns
  • Lower pressure reduces overspray
$3,070.00
GG 258970.jpg

RS GUN, ASM, EXT MIX, CHOP

GG 258970

GG 258970

RS GUN, ASM, EXT MIX, CHOP

Graco 258970 RS External Mix Chop Gun with Cutter and Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It&prime, s lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

  • Makes production easier

      Simple, quick start up and shut down

      Quick tool-less blade change

      No need to adjust needle settings after maintenance

    • Improves product quality

        Lightweight cutter gives better chopping control

        Easy one-hand cutter speed control

        Superior spray pattern

      • Improves operator comfort for increased job satisfaction

          Lighter, ergonomic gun reduces fatigue

          Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

          No problems soaking the RS Gun in solvents overnight


        • Model: RS
        • Chop Gun Type: With Cutter
        • Compatible Material: Polyester Resin, Gel-Coat
        • For Use With: FRP System
        • Gun Type: Chop Gun
        • Gun Weight (g): 1057
        • Gun Weight (kg): 1.06
        • Gun Weight (lb): 2.33
        • Gun Weight (oz): 37.28
        • Includes: CST443 Tip, Cutter
        • Maximum Air Pressure (bar): 8.6
        • Maximum Air Pressure (kg/cm²): 8.79
        • Maximum Air Pressure (kPa): 860
        • Maximum Air Pressure (psi): 125
        • Maximum Fluid Pressure (bar): 138
        • Maximum Fluid Pressure (kg/cm²): 141
        • Maximum Fluid Pressure (kPa): 13800
        • Maximum Fluid Pressure (psi): 2000
        • Maximum Fluid Temperature (°C): 38
        • Maximum Fluid Temperature (°F): 100
        • Maximum Fluid Pressure (bar): 138
        • Maximum Fluid Pressure (kg/cm²): 141
        • Maximum Fluid Pressure (kPa): 13800
        • Maximum Fluid Pressure (psi): 2000
        • Maximum Fluid Temperature (°C): 38
        • Maximum Fluid Temperature (°F): 100
        • Minimum Air Inlet Pressure (bar): 5.5
        • Minimum Air Inlet Pressure (kPa): 550
        • Minimum Air Inlet Pressure (psi): 80
        • Mix Type: External Mix
$4,490.00
GG 288425.jpg

CONTRACTOR GUN, 4 FINGER, (PKGD)

GG 288425

GG 288425

CONTRACTOR GUN, 4 FINGER, (PKGD)

Contractor Airless Spray Gun, 4 Finger Trigger, RAC X 517 SwitchTip The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 4-finger trigger and a RAC X 517 SwitchTip and Guard. Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
Trigger Lock
  • Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns
$470.00
GG 289008.jpg

AIRPRO GUN, COMP, .055

GG 289008

GG 289008

AIRPRO GUN, COMP, .055

Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
GG 289257.jpg

FINEX GUN, 2, MINI, HVLP, .8

GG 289257

GG 289257

FINEX GUN, 2, MINI, HVLP, .8

Graco 289257 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.031 in (0.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Mini Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.08
  • Fluid Orifice Size (in): 0.031
  • Fluid Orifice Size (mm): 0.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.4
  • Gun Weight (lb): 0.9
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$252.00
GG 289260.jpg

FINEX GUN, 2, MINI, HVLP, 1.4

GG 289260

GG 289260

FINEX GUN, 2, MINI, HVLP, 1.4

Graco 289260 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Mini Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.4
  • Gun Weight (lb): 0.9
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$217.50
Picture of Trophy C, 12 Inch Extension

Trophy C, 12 Inch Extension

BB 152-3887

BB 152-3887

Trophy C, 12 Inch Extension
Call for pricing
Picture of Wider2L-12G2P, Conventional Pressure, 1.2 - Replaces# 5400

Wider2L-12G2P, Conventional Pressure, 1.2 - Replaces# 5400

IW 21011

IW 21011

Wider2L-12G2P, Conventional Pressure, 1.2 - Replaces# 5400
$708.01
Picture of WS-400-SR2-13HD-KIT, 601-SR2, Non-Digital

WS-400-SR2-13HD-KIT, 601-SR2, Non-Digital

IW 2713

IW 2713

WS-400-SR2-13HD-KIT, 601-SR2, Non-Digital
$1,027.40
Picture of LPH80-082G Touch-Up Gun w/ Cup

LPH80-082G Touch-Up Gun w/ Cup

IW 4911

IW 4911

LPH80-082G Touch-Up Gun w/ Cup
$577.05
Picture of Wa101-132P Special Build w/ 1.3 Needle/Nozzle

Wa101-132P Special Build w/ 1.3 Needle/Nozzle

IW 5440B-S1

IW 5440B-S1

Wa101-132P Special Build w/ 1.3 Needle/Nozzle
Call for pricing
Picture of IWATA LPH400-124LV HVLP GRAVITY GUN (1.2) NO CUP

IWATA LPH400-124LV HVLP GRAVITY GUN (1.2) NO CUP

IW 5540

IW 5540

IWATA LPH400-124LV HVLP GRAVITY GUN (1.2) NO CUP
$830.77
Picture of ALG7 Airless Spray Gun, BPS 1/4

ALG7 Airless Spray Gun, BPS 1/4

IW 7041

IW 7041

ALG7 Airless Spray Gun, BPS 1/4
$716.21
Picture of HP-CS Air Brush

HP-CS Air Brush

IW ECL4500

IW ECL4500

HP-CS Air Brush
Call for pricing
Refine
×
Manufacturer