Spray Guns - Manual
PERFORMAA GUN, AA, 1500, WL, SWIVEL
GG 26B503
GG 26B503
PERFORMAA GUN, AA, 1500, WL, SWIVEL
Graco 26B503 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap, light trigger pull and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Includes a low profile fluid swivel
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,200.00
CONTRACTOR GUN, RAC 5(PKGD)
GG 288421
GG 288421
CONTRACTOR GUN, RAC 5(PKGD)
Contractor Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTip The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 2-finger trigger and a RAC 5 517 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$470.00
FTX GUN, RAC 5(PKGD)
GG 288431
GG 288431
FTX GUN, RAC 5(PKGD)
Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC 5 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC 5 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
$415.00
2101 Gun w/ 24in extension, 63SS-63P
BB 2101-6260-0/52-699
BB 2101-6260-0/52-699
2101 Gun w/ 24in extension, 63SS-63P
$3,191.00
DVX Manual Pressure Gun, 1.2 MM
DD DVXP-P2-12
DD DVXP-P2-12
Precision fluid delivery pump or pressure component for Binks spray systems. Ensures consistent material flow and pressure control.- Binks DVXP series pressure component P2-12.
- Fluid Delivery Component
- High Precision Flow
- Compatible with Binks Guns
$871.00
X5500 RP Gun, 1.4, W/RPS Cups
SATA 1061613
SATA 1061613
X5500 RP Gun, 1.4, W/RPS Cups
Call for pricing
1000K RP Gun, 1.3, Standard Nozzle
SATA 132118
SATA 132118
1000K RP Gun, 1.3, Standard Nozzle
Call for pricing
Minijet 4400B RP Gun, 1.2SR w/RPS Cup
SATA 198366
SATA 198366
Minijet 4400B RP Gun, 1.2SR w/RPS Cup
Call for pricing
Trophy Aa Handgun, 1600Psi & Aa10 + 1510 Tip
BB 1600-HF1510
BB 1600-HF1510
Trophy Aa Handgun, 1600Psi & Aa10 + 1510 Tip
$1,223.00
2100 Gun Assembly, (66Ss-63Pb)
BB 2101-4300-7
BB 2101-4300-7
2100 series replacement part.- Binks 2100 component.
- 2100 Series
$516.00
Flg4 Conv Gravity Gun W/1.5Mm Fluid Nozzle
DD FLG-CNG-115
DD FLG-CNG-115
Flg4 Conv Gravity Gun W/1.5Mm Fluid Nozzle
$481.00
AIRPRO GUN, SIPHON, HVLP, .055
GG 289030
GG 289030
AIRPRO GUN, SIPHON, HVLP, .055
Graco 289030 AirPro Air Spray Siphon Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Specialty
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Siphon Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
$966.00
AIRPRO GUN, AUTOMOTIVE, HVLP, .047
GG 289035
GG 289035
AIRPRO GUN, AUTOMOTIVE, HVLP, .047
Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Automotive
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.12
- Fluid Orifice Size (in): 0.047
- Fluid Orifice Size (mm): 1.2
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Call for pricing
PRO XP GUN, ES, 60KV
GG L60T10
GG L60T10
PRO XP GUN, ES, 60KV
Graco L60T10 Pro Xp60 Air Spray Manual Electrostatic General Gun Model, 60 kV, 0.055 in (1.5 mm) nozzle, standard display, standard coatings
The 60 kV electrostatic air spray gun is the smallest profile gun with an internal power supply on the market.
- Internal power supply reduces operator fatigue with no heavy cords to slow painters down.
- Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.
- High transfer efficiency equals less waste, saving you money on material.
- Model: Pro Xp
- Series: 60
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Application: Electrostatic, Standard
- Applicator Type: Manual
- Coating Type: Standard, Specialty
- Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solvent borne, Urethanes
- Display Type: Standard
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Type: Electrostatic
- Gun Weight (g): 600
- Gun Weight (kg): 0.6
- Gun Weight (lb): 1.32
- Gun Weight (oz): 21.16
- Includes: Air Cap, Nozzle, Tool Kit, Gun Cover, Exhaust Tube
- Maximum Fluid Pressure (bar): 7.0
- Maximum Fluid Pressure (kg/cm²): 7.14
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 48
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 7.0
- Maximum Fluid Pressure (kg/cm²): 7.14
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 48
- Maximum Fluid Temperature (°F): 120
- Maximum Paint Resistivity (megohm/cm): 25
- Minimum Paint Resistivity (megohm/cm): 1
- Nozzle Size (cm): 0.15
- Nozzle Size (in): 0.055
- Nozzle Size (mm): 1.5
- Overall Length (cm): 24.13
- Overall Length (in): 9.5
- Overall Length (mm): 241.3
$8,130.00
Air Gunza, AZ3HP2 Gravity Spray Gun, 2.0
IW 9233
IW 9233
Air Gunza, AZ3HP2 Gravity Spray Gun, 2.0
$227.77
Advance Suction Spraygun Kit Hvlp
DD ADV-S507-18
DD ADV-S507-18
Advance Suction Spraygun Kit Hvlp
$815.00