Spray Guns - Manual
GUN, POLE, 3', DOMESTIC
GG 287023
GG 287023
GUN, POLE, 3', DOMESTIC
Graco 287023 Pole Gun, 3 ft
Extend your range and spray more efficiently without ladders or scaffolding with the 3 foot Pole Gun.
- Heavy-duty extensions are ideal for high-pressure spraying or pressure roller applications.
- Airless Tip Extensions can be attached directly to an airless gun making them ideal for spraying ceilings, overhangs and decks.
- CleanShot Valve can be attached directly to any extension and provides a clean fluid shutoff at the tip – no spitting.
- Model: Graco
- Series: Pole Gun
- Bleed Type: Bleeder
- Compatible Material: Water-Based Paint
- Component A Inlet Size (in): 1/4
- Component A Inlet Thread Type: NPSM
- Component Type: Single Component
- Fluid Orifice Size (cm): 0.229
- Fluid Orifice Size (in): 0.090
- Fluid Orifice Size (mm): 2.29
- For Use With: Electric Airless Sprayer
- Gun Activation: Manual
- Gun Type: Pole Gun
- Gun Weight (kg): 0.1253
- Gun Weight (lb): 2.76
- Includes: Cleanshot Shut-off Valve, Contractor In-line Valve
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Purge Method: Liquid
$514.00
FINEX GUN, GRACO, 2, CONV., 1.8
GG 289246
GG 289246
FINEX GUN, GRACO, 2, CONV., 1.8
Graco 289246 Finex Air Spray Gravity Feed Gun, conventional, 0.071 in (1.8 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
- Aircaps optimized for high quality spray performance
- Lightweight, ergonomic gun
- Lightest trigger pull in its category
- Model: Finex
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Body Material: Metal
- Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Standard Gravity Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.18
- Fluid Orifice Size (in): 0.071
- Fluid Orifice Size (mm): 1.8
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 540
- Gun Weight (kg): 0.54
- Gun Weight (lb): 1.2
- Gun Weight (oz): 19.05
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Working Pressure (bar): 6.9
- Maximum Fluid Working Pressure (MPa): 0.69
- Maximum Fluid Working Pressure (psi): 100
- Product Type: Spray Gun
$200.00
Supernova WS400-1401HD Gun (no cup)
IW 5910
IW 5910
Supernova WS400-1401HD Gun (no cup)
Call for pricing
2100 Gun Assembly, 63Bss-66Sd-3
BB 2101-2808-2
BB 2101-2808-2
Replacement part for 2100 series guns.- Binks 2100 series component.
- 2100 Series Part
$516.00
Tekna Prolite Gun/Cap (1.3, 1.4, 1.5.Hv30, Te20)
DD 303938
DD 303938
Tekna Prolite Gun/Cap (1.3, 1.4, 1.5.Hv30, Te20)
$1,164.00
Trophy Tu Press 1.4Xblvmp
BB 1465-14LV-B1S
BB 1465-14LV-B1S
Trophy series LV spray gun.- Binks Trophy LV gun.
- Trophy LV Series
$683.00
Prolite-S Gravity (Hv5, Te5, 1.0, Cupped)
DD 905082
DD 905082
Genuine Binks part.- Binks 905082 replacement.
- Genuine Part
$712.00
AUTOPLUS GUN, AIRLESS
GG 288554
GG 288554
AUTOPLUS GUN, AIRLESS
Graco 288554 Automatic Airless Gun
Less maintenance and more system uptime
Application: For streaming, spray and extrusion- Durable stainless steel construction, longer life needle and seat construction specifically designed to handle the toughest sealant and adhesive materials
- Lightweight and compact rounded gun design
- Capable of handling high production speeds
- Wide range tip line for a variety of applications
- Capable of handling multiple nozzle sizes for any application
- Lightweight and compact rounded gun design
- Capable of handling high production speeds
- Durable stainless steel construction handles the toughest materials
- Fewer parts means an overall lower cost of repair
- Capable of handling multiple nozzle sizes for any application
- Model: AutoPlus
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Connection Type: Threaded
- Flow Control Type: Control
- For Use With: PR70 Refill Kit
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 35
- Maximum Working Pressure (psi): 5000
- Mount Location: Reciprocating Arm Rod Mount, Stationary Mount
- Number of Outputs: 1
$1,635.00
IWATA LPH400-144LV HVLP GRAVITY GUN (1.4) NO CUP
IW 5550
IW 5550
IWATA LPH400-144LV HVLP GRAVITY GUN (1.4) NO CUP
$830.77
PERFORMAA GUN, AA, 5000, RAC, SWIVEL
GG 26B518
GG 26B518
PERFORMAA GUN, AA, 5000, RAC, SWIVEL
Graco 26B518 PerformAA 5000 RAC Air Assist Gun with Reverse A Clean air cap and spray tip and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi RAC air assist spray gun
- Rerverse-A-Clean air cap and tip for quick cleaning
- Includes a low profile fluid swivel
- Model: PerformAA RAC
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: FFLP, LTX
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: N/A
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 110
- Overall Height (cm): 19.8
- Overall Height (in): 7.8
- Overall Height (mm): 198
- Overall Length (cm): 18.3
- Overall Length (in): 7.2
- Overall Length (mm): 183
- Product Type: Spray Gun
$1,360.00
XTR+ GUN, XTR7+, 1" HND, 2FNG, XHDRAC
GG XTR725
GG XTR725
XTR+ GUN, XTR7+, 1" HND, 2FNG, XHDRAC
Graco XTR725 XTR7+ Airless Spray Gun, Round Handle, 2-Finger Trigger, XHD RAC Tip
New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you&prime, ll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.
Application: Designed to conquer the toughest protective coatings.- Self-locking needle design for faster rebuilds
- XHD RAC tip provides exceptional life, pattern and finish
- Easily remove and clean gun filter with trigger guard integrated wrench
- Model: XTR7+
- Maximum Working Pressure (bar): 500
- Maximum Working Pressure (MPa): 50
- Maximum Working Pressure (psi): 7250
$603.00
GUN, SILVER
GG 246240
GG 246240
GUN, SILVER
Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC X 517 SwitchTip The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard. Rugged Design- Durable forged aluminum withstands harsh work environments
- Lighter weight than competitive guns Polished body is easy to clean
- Factory set needle needs no trigger adjustments
- Guaranteed for life against breakage
- Maximum performance and long life
- Fluid flows directly to the tip through the gun fluid tube
- Provides the ability to spray heavier materials
- Including high solid coatings and mastics
- Provides faster shut-off to reduce spitting of light viscosity material
- Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)
$548.00
Flg4 Hvlp Pressure Gun With 1.5Mm Fluid Nozzle
DD FLG-HVP-315
DD FLG-HVP-315
High volume pressure related component.- Binks high volume component.
- High Volume
$481.00
RS GUN, ASM, EXT MIX, GEL
GG 258840
GG 258840
RS GUN, ASM, EXT MIX, GEL
Graco 258840 RS External Mix Gel Coat Gun with Tip
Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It&prime, s lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.
- Makes production easier
- Improves product quality
- Improves operator comfort for increased job satisfaction
Lighter, ergonomic gun reduces fatigue
Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
No problems soaking the RS Gun in solvents overnight
- Model: RS
- Chop Gun Type: Without Cutter
- Compatible Material: Polyester Resin, Gel-Coat
- For Use With: FRP System
- Gun Type: Gel Coat
- Gun Weight (g): 940
- Gun Weight (kg): 0.94
- Gun Weight (lb): 2.08
- Gun Weight (oz): 33.16
- Includes: CST521 Tip
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kg/cm²): 8.79
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (psi): 125
- Maximum Fluid Pressure (bar): 138
- Maximum Fluid Pressure (kg/cm²): 141
- Maximum Fluid Pressure (kPa): 13800
- Maximum Fluid Pressure (psi): 2000
- Maximum Fluid Temperature (°C): 38
- Maximum Fluid Temperature (°F): 100
- Maximum Fluid Pressure (bar): 138
- Maximum Fluid Pressure (kg/cm²): 141
- Maximum Fluid Pressure (kPa): 13800
- Maximum Fluid Pressure (psi): 2000
- Maximum Fluid Temperature (°C): 38
- Maximum Fluid Temperature (°F): 100
- Minimum Air Flow Rate (SCFM): 2.0
- Minimum Air Inlet Pressure (bar): 0
- Minimum Air Inlet Pressure (kPa): 0
- Minimum Air Inlet Pressure (psi): 0
- Mix Type: External Mix
Lightweight cutter gives better chopping control
Easy one-hand cutter speed control
Superior spray pattern
- Improves operator comfort for increased job satisfaction
Simple, quick start up and shut down
Quick tool-less blade change
No need to adjust needle settings after maintenance
- Improves product quality
$2,870.00
