Spray Guns - Manual
LPK3 HVLP-ROB Gun w/ 0.8 Nozzle
SATA 94532
SATA 94532
LPK3 HVLP-ROB Gun w/ 0.8 Nozzle
Call for pricing
2100 Gun Assembly, 68Vt-L/Air Nozz
BB 2101-5200-0
BB 2101-5200-0
2100 Gun Assembly, 68Vt-L/Air Nozz
$622.00
Trophy Gun Pressure/Siphon, 10X32Hvlp
BB 2465-10HV-32S0
BB 2465-10HV-32S0
Trophy Gun Pressure/Siphon, 10X32Hvlp
$860.00
Trophy Gun Pressure/Siphon, 1.2X16Rs
BB 2465-12CN-16S0
BB 2465-12CN-16S0
Trophy Gun Pressure/Siphon, 1.2X16Rs
$860.00
TROPHY GUN PRESSURE/SIPHON, 1.8TCX14CONV
BB 2465-18CN-14V0
BB 2465-18CN-14V0
TROPHY GUN PRESSURE/SIPHON, 1.8TCX14CONV
$1,083.00
EDGE II GUN, HVLP, CUP, PKGD
GG 17P653
GG 17P653
EDGE II GUN, HVLP, CUP, PKGD
Graco 17P653 EDGE II Gun with Metal Cup
Maximize your spraying performance with the innovative HVLP EDGE II Gun. Cutting edge technology such as intuitive gun controls, Quick Release fluid set, and optimized air pressure and airflow will help you achieve the highest quality finish available in fine finish spraying.
- Integrated Flow Control
Combines material and air flow into one simple control
Optimized to spray the majority of fine finish applications
Quick adjustment with 360° rotation and indicator for repeatable spray setting
- Adjustable Air Cap
3-position rotation to change spray pattern
Conveniently located at the front of the gun
- Exclusive Quick Clean Check Valve
Allows more air pressure into the material cup to spray heavier material
Easily clean and reuse versus replace
Located by gun to reduce clogged valves due to paint contamination
- Quick Release Needle Design
Change out needles from the front of the gun with just a click
Easy to change, easy to clean with no tools needed
Remove front air cap and nozzle
Slide trigger lever to release needle
Pull needle out
- Model: HVLP
- Series: EDGE II
- Compatible Material: Varnish, Enamel, Latex, Stains
- For Use With: FinishPro HVLP Sprayers
- Gun Activation: Manual
- Gun Type: HVLP Gun
- Gun Weight (oz): 20
- Includes: 1 qt (0.95 L) Metal Cup, #3 Quick Release Fluid Set
- Maximum Air Inlet Pressure (bar): 0.7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (MPa): 0.07
- Maximum Air Inlet Pressure (psi): 13
- Maximum Air Pressure (bar): 0.7
- Maximum Air Pressure (kPa): 70
- Maximum Air Pressure (MPa): 0.07
- Maximum Air Pressure (psi): 10
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 350
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 350
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
$675.00
STELLAIR GUN, CONV (.042)
GG 2004147
GG 2004147
STELLAIR GUN, CONV (.042)
Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, HVLP (.042)
GG 2004151
GG 2004151
STELLAIR GUN, HVLP (.042)
Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.055) SST TIP, AUTOMOVTIVE
GG 2004164
GG 2004164
STELLAIR GUN, CONV (.055) SST TIP, AUTOMOVTIVE
Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), Automotive, SST TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
STELLAIR GUN, HVLP (.055), AUTOMOVTIVE
GG 2004165
GG 2004165
STELLAIR GUN, HVLP (.055), AUTOMOVTIVE
Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Automotive, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, COMP (.055), AUTOMOVTIVE
GG 2004166
GG 2004166
STELLAIR GUN, COMP (.055), AUTOMOVTIVE
Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), Automotive, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, HVLP (.055), TRIM
GG 2004176
GG 2004176
STELLAIR GUN, HVLP (.055), TRIM
Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Trim, PEEK TipPressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Trim air cap produces a well-defined edge with minimal overspray, essential for selective applications like edges, trim, and dielectrics.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.040), WOOD
GG 2004178
GG 2004178
STELLAIR GUN, CONV (.040), WOOD
Stellair Air Spray Gun, Conventional, 0.040 in (1.0 mm), Wood, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Wood air cap applies low viscosity material, such as stains and toners, used for wood finishing.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, HVLP (.040), WOOD
GG 2004179
GG 2004179
STELLAIR GUN, HVLP (.040), WOOD
Stellair Air Spray Gun, HVLP, 0.040 in (1.0 mm), Wood, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Wood air cap applies low viscosity material, such as stains and toners, used for wood finishing.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
GUN, COMPLIANT, .070, WITH HOSE
GG 2005976
GG 2005976
GUN, COMPLIANT, .070, WITH HOSE
Stellair ACE Air Spray Gun with Hose, .070 in (1.8 mm) Nozzle Size The unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer. Whether you’re a custom shop or high volume factory, Stellair ACE brings all-star atomization, carbon fiber construction and ergonomics to metal, plastic, and wood finishing. Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations. Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions. Air cap stays clean while delivering atomization that results in industry leading finish quality. Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand. Hoses with swivel attachments move with you at any angle, preventing tripping and injury. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
$893.00
STELLAIR AIR SPRAY GUN, HVLP. 0.030 IN (0.8 MM). GENERAL INDUSTRY
GG 2006145
GG 2006145
GUN, HVLP (.030)
Graco 2006145 Stellair Air Spray Gun, HVLP, 0.030 in (0.8 mm), General Industry
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Application: Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results. Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
- High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
- General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
- Swivel and hose move with you at any angle, preventing
$630.00
Stellair Air Spray Gun, HVLP, 0.110 In. (2.8 MM), PEEK Tip, General Industry
GG 2006147
GG 2006147
GUN, HVLP (.110)
Graco 2006147 Stellair Air Spray Gun, HVLP, 0.110 in (2.8 mm), General Industry
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
- High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
- General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
- Swivel and hose move with you at any angle, preventing tripping and injury.
- One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related
$630.00
Stellair, Air Spray Gun Conventional, 1.1mm
GG 2006151
GG 2006151
GUN, CONVENTIONAL (.042) WATERBORNE
Graco 2006151 Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Application: Whether you are a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
- Conventional is the traditional air spray method, producing Class A, automotive finish quality.
- General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
- Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
- One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
- Direc
$473.00
AIRPRO GUN, STAINLESS, CONV
GG 24U188
GG 24U188
AIRPRO GUN, STAINLESS, CONV
Graco 24U188 AirPro Air Spray Pressure Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, SST Tip, for General Metal Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Metal
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Call for pricing
RS GUN, ASM, INT MIX, CHOP
GG 258971
GG 258971
RS GUN, ASM, INT MIX, CHOP
RS Internal Mix Chop Gun with Cutter and TipInnovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.
Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.Makes production easier
- Simple, quick start up and shut down
- Quick tool-less blade change
- No need to adjust needle settings after maintenance
Improves product quality
- Lightweight cutter gives better chopping control
- Easy one-hand cutter speed control
- Superior spray pattern
Improves operator comfort for increased job satisfaction
- Lighter, ergonomic gun reduces fatigue
- Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
- No problems soaking the RS Gun in solvents overnight
Saves material costs
- Air Assist Containment (AAC®) standard on all RS Guns
- Lower pressure reduces overspray
$9,640.00
AIRPRO GUN, WB, AIR SPRAY, .030
GG 288964
GG 288964
AIRPRO GUN, WB, AIR SPRAY, .030
Graco 288964 AirPro Air Spray Pressure Feed Gun, Conventional, 0.030 inch (0.8 mm) Nozzle, for Waterborne Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Waterborne
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.08
- Fluid Orifice Size (in): 0.030
- Fluid Orifice Size (mm): 0.8
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Call for pricing