Airpower | Plural Component

Pump, 15.00. PRM, NIT, Tube

GG 01/1712-D/99N

Pump, 15.00. PRM, NIT, Tube

$1,375.00

Frp Rs Gel System,Xg,13:1,Cart,25

GG 16R001

FRP RS GEL SYSTEM, XG, 13:1, CART, 25

Graco 16R001 13:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose and Cart

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 25
        Hose Length (m): 7.6
        Includes: Hose, Cart
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 5680
        Maximum Flow Rate (GPM): 1.5
        Maximum Flow Rate (L/min): 5.68
        Maximum Working Pressure (bar): 90
        Maximum Working Pressure (kPa): 9000
        Maximum Wo

$13,600.00

Frp Rs Gel System,Xg,17:1,Cart,25

GG 16R005

FRP RS GEL SYSTEM, XG, 17:1, CART, 25

Graco 16R005 17:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose and Cart

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 25
        Hose Length (m): 7.6
        Includes: Hose, Cart
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 4160
        Maximum Flow Rate (GPM): 1.1
        Maximum Flow Rate (L/min): 4.16
        Maximum Working Pressure (bar): 119
        Maximum Working Pressure (kPa): 11900
        Maximum

$13,340.00

Frp Rs Gel System,Xg,13:1,Cart,50

GG 16R012

FRP RS GEL SYSTEM, XG, 13:1, CART, 50

Graco 16R012 13:1 Ratio External Mix Gel System with 50 ft (15.2 m) Hose and Cart

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 50
        Hose Length (m): 15.2
        Includes: Hose, Cart
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 5680
        Maximum Flow Rate (GPM): 1.5
        Maximum Flow Rate (L/min): 5.68
        Maximum Working Pressure (bar): 90
        Maximum Working Pressure (kPa): 9000
        Maximum

$14,730.00

Frp Rs Gel System,Xg,13:1,Cmb,25

GG 16R018

FRP RS GEL SYSTEM, XG, 13:1, CMB, 25

Graco 16R018 13:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose, Cart, Mast, and Boom

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 25
        Hose Length (m): 7.6
        Includes: Hose, Cart, Mast, Boom
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi):

$32,180.00

Frp Rs Gel System,Ig,13:1,Cart,Nh

GG 16R050

FRP RS GEL SYSTEM, IG, 13:1, CART, NH

Graco 16R050 13:1 Ratio Cart Mounted Internal Mix Gel System

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized Ratio Stability
- Lower Cost of Ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: IG
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Includes: Cart
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 5680
        Maximum Flow Rate (GPM): 1.5
        Maximum Flow Rate (L/min): 5.68
        Maximum Working Pressure (bar): 90
        Maximum Working Pressure (kPa): 9000
        Maximum Working Pressure (MPa): 9
        Maximum Working Pressure (psi): 1300
        Overall

$11,340.00

Frp Rs Chop System,Xc,13:1,No,Nh

GG 16R109

FRP RS CHOP SYSTEM, XC, 13:1, NO, NH

Graco 16R109 13:1 Ratio External Mix Chop System

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        
        Model: FRP
        Series: XC
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 5680
        Maximum Flow Rate (GPM): 1.5
        Maximum Flow Rate (L/min): 5.68
        Maximum Working Pressure (bar): 90
        Maximum Working Pressure (kPa): 9000
        Maximum Working Pres

$10,900.00

Frp Rs Chop System,Ic,13:1,Cmb,35

GG 16R126

FRP RS CHOP SYSTEM, IC, 13:1, CMB, 35

Graco 16R126 13:1 Ratio Internal Mix Chop System with 35 ft (10.7 m) Hose, Cart, Mast, and Boom

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized Ratio Stability
- Lower Cost of Ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: IC
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 35
        Hose Length (m): 10.7
        Includes: Hose, Cart, Mast, Boom
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 5680
        Maximum Flow Rate (GPM): 1.5
        Maximum Flow Rate (L/min): 5.68
        Maximum Working Pressure (bar): 90
        Maximum Working Pressure (kPa):

$16,030.00

Frp Rs Chop System,Ic,13:1,No,25

GG 16R135

FRP RS CHOP SYSTEM, IC, 13:1, NO, 25

Graco 16R135 13:1 Ratio Internal Mix Chop System with 25 ft (7.6 m) Hose

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized Ratio Stability
- Lower Cost of Ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: IC
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 25
        Hose Length (m): 7.6
        Includes: Hose,
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flo

$13,930.00

Frp Rs Chop System,Ic,13:1,No,50

GG 16R141

FRP RS CHOP SYSTEM, IC, 13:1, NO, 50

Graco 16R141 13:1 Ratio Internal Mix Chop System with 50 ft (15.2 m) Hose

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized Ratio Stability
- Lower Cost of Ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: IC
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 50
        Hose Length (m): 15.2
        Includes: Hose,
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum F

$14,470.00

Frp Rs Gel System,Xg,17:1,Cmb,25

GG 16R158

FRP RS GEL SYSTEM, XG, 17:1, CMB, 25

Graco 16R158 17:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose, Cart, Mast, and Boom

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 25
        Hose Length (m): 7.6
        Includes: Hose, Cart, Mast, Boom
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi):

$15,140.00

Frp Rs Gel System,Xg,17:1,Cmb,50

GG 16R164

FRP RS GEL SYSTEM, XG, 17:1, CMB, 50

Graco 16R164 17:1 Ratio External Mix Gel System with 50 ft (15.2 m) Hose, Cart, Mast, and Boom

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XG
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 50
        Hose Length (m): 15.2
        Includes: Hose, Cart, Mast, Boom
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi):

$16,800.00

Frp Rs Gel System,Xg,17:1,No,Nh

GG 16R179

FRP RS GEL SYSTEM, XG, 17:1, NO, NH

Graco 16R179 17:1 Ratio Cart Mounted External Mix Gel System

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        
        Model: FRP
        Series: XG
        Air Inlet Size (cm): 0.635
        Air Inlet Size (in): 1/4
        Air Inlet Size (mm): 6.35
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component A Inlet Size (mm): 9.525
        Component B Inlet Size (in): 1-5/16
        Component B Inlet Size (mm): 33.34
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (cm): 1.905
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Size (mm): 19.05
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 4160
        Maximum Flow Rate (GPM): 1.1
        Maximum Flow Rate (L/min): 4.16
        Maximum Working Pressure (bar): 119
        Maximum Working Pressure (kPa): 11900
        Maximum

$10,870.00

Frp Rs Gel System,Ig,17:1,Cart,50

GG 16R187

FRP RS GEL SYSTEM, IG, 17:1, CART, 50

Graco 16R187 17:1 Ratio Internal Mix Gel System with 50 ft (15.2 m) Hose and Cart

To keep material costs low, the system has been designed so that it doesn't need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized Ratio Stability
- Lower Cost of Ownership
  - Optional DataTrak Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage - no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: IG
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Hose Length (ft): 50
        Hose Length (m): 15.2
        Includes: Hose, Cart
        Maximum Air Inlet Pressure (bar): 6.9
        Maximum Air Inlet Pressure (kPa): 690
        Maximum Air Inlet Pressure (psi): 100
        Maximum Flow Rate (cc/min): 4160
        Maximum Flow Rate (GPM): 1.1
        Maximum Flow Rate (L/min): 4.16
        Maximum Working Pressure (bar): 119
        Maximum Working Pressure (kPa): 11900
        Maximu

$14,730.00

Reactor 2 H-50 Proportioner, 20 KW, 230V

GG 17H053

REACTOR 2 H-50 PROPORTIONER, 230V, 20KW

Graco 17H053 Reactor 2 H-50 Proportioner, 20 kW, 230 V

Gracos hydraulic Reactor H-50 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

Application: For medium to high-output foam applications and roofing projects - applies up to 52 lb (23.6 kg) per minute.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry

Model: Reactor 2
Series: H-50
Product Series: Non-Elite

Amperage (A): 95
Application: Spray Foam
Applicator Type: Manual

Compatible Material: Plural Components

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Type: No Gun

Hose Package: No Hose

Material Application: Polyurethane Foam

Maximum Flow Rate (kg/min): 23.59
Maximum Flow Rate (lb/min): 52

Maximum Fluid Temperature ( degree C): 88
Maximum Fluid Temperature ( degree F): 190

Maximum Hose Length (ft): 410
Maximum Hose Length (m): 125

Maximum Mix Ratio: 1:1

Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000

Overall Depth (cm): 53
Overall Depth (in): 20.88
Overall Depth (mm): 530

Overall Height (cm): 160.8
Overall Height (in): 63.3
Overall Height (mm): 1608
Overall Width (cm): 83.7
Overall Width (in): 32.96
Overall Width (mm): 837

Power Rating (HP): 26.82
Power Rating (kW): 20
Power Rating (W): 20000
Power Source: Hydraulic

Pressure Type: High Pressure
Product Type: Plural Component

$51,470.00

Proportioner, H-XP2, Sel, 15KW, HR2

GG 17H062

REACTOR 2 H-XP2 PROPORTIONER, SEL, 15KW

Graco 17H062 Reactor 2 H-XP2 Proportioner, 15 kW

Gracos hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

Application: For coatings that require high-pressures - applies up to 1.5 gal (5.7 liters) per minute. Gracos line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry

Model: Reactor 2
Series: H-XP2
Product Series: Non-Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual

Compatible Material: Plural Components

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Type: No Gun

Hose Package: No Hose

Material Application: Polyurea

Maximum Flow Rate (cc/min): 5680

Maximum Flow Rate (GPM): 1.5
Maximum Flow Rate (L/min): 5.68

Maximum Fluid Temperature ( degree C): 88
Maximum Fluid Temperature ( degree F): 190

Maximum Hose Length (ft): 310
Maximum Hose Length (m): 94.5

Maximum Mix Ratio: 1:1

Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500

Overall Depth (cm): 53
Overall Depth (in): 20.88
Overall Depth (mm): 530

Overall Height (cm): 160.8
Overall Height (in): 63.3
Overall Height (mm): 1608
Overall Width (cm): 83.7
Overall Width (in): 32.96
Overall Width (mm): 837

Power Rating (HP): 20.11
Power Rating (kW): 15
Power Rating (W): 15000
Power Source: Hydrau

$46,520.00

Proportioner, H-XP3, 20KW

GG 17H074

REACTOR 2 H-XP3 PROPORTIONER, 230V, 20KW

Graco 17H074 Reactor 2 H-XP3 Proportioner, 20 kW, 230 V

Gracos hydraulic Reactor H-XP3 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

Application: For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
- Sacrificial surge protector
  Protects your electronics against excessive power spikes
- Three-year warranty
  Covers user display and control modules
  One of the best in the industry
- Elite Models
  Graco InSite included
  Inlet pressure and temperature sensors (interfaces with Graco InSite)
  Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

$49,960.00

REACTOR 2 H-XP2 ELITE PROPORTIONER, 15 KW

GG 17H162

REACTOR 2 H-XP2 PROPORTIONER, SEL, 15KW, ELITE

Graco 17H162 Reactor 2 H-XP2 Elite Proportioner, 15 kW

Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes.

Application: For coatings that require high-pressures - applies up to 1.5 gal (5.7 liters) per minute. Graco's line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes.

What a hydraulic system can do for you:
- Dependability - robust, durable, longest life spray system
- Reduce downtime - allows for longer time in between required maintenance
- Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
- Control your Reactor using your phone
- Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
- Monitor your rigs/crews using the multi-system dashboard
- Troubleshoot an issue quickly using real-time data
- Provide documentation to a customer
- Use reports to better manage your business
- Saves all your spray data to the cloud
- Utilize account management to better manage your equipment and crews
- Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
- Tracks, monitors and saves project data
- Data can be saved and downloaded onto a USB drive
- Stores up to 24 chemical recipes
- Drum level indicators
Sacrificial surge protector
- Protects your electronics against excessive power spikes
Three-year warranty
- Covers user display and control modules
- One of the best in the industry
Elite Models
- Graco InSite included
- Inlet pressure and temperature sensors (interfaces with Graco InSite)
- Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

Model: Reactor 2
Series: H-XP2
Product Series: Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual

Compatible Material: Plural Components

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Type: No Gun

Hose Package: No Hose
Includes: Elite Kit

Material Application: Polyurea

Maximum Flow Rate (cc/min): 5680

Maximum Flow Rate (GPM): 1.5
Maximum Flow Rate (L/min): 5.68

Maximum Fluid Temperature ( degree C): 88
Maximum Fluid Temperature ( degree F): 190

Maximum Hose Length (ft): 310
Maximum Hose Length (m): 94.5

Maximum Mix Ratio: 1:1

Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500

Overall Depth (cm): 53
Overall Depth (in): 20.88
Overall Depth (mm): 530

Overall Height (cm): 160.8
Overall Height (in): 63.3
Overall Height (mm): 1608
Overall Width (cm): 83.7
Overall Width (in): 32.96
Overall Width (mm):

$49,210.00

Fusion Ap Gun,Round 03

GG 246103

FUSION AP GUN, ROUND 03

Graco 246103 Round Fusion Air-Purge Gun with 03 Mix Chamber and 0.060 in (1.5 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Applicator Type: Manual

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.42875
Component B Inlet Size (in): 9/16-18
Component B Inlet Size (mm): 14.2875
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.152
Fluid Orifice Size (in): 0.060
Fluid Orifice Size (mm): 1.52

For Use With: Non-Flammable Foam and Polyurea

Gun Activation: Manual
Gun Included: 1
Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.060
Impingement Port Size (mm): 1.50
Includes: AR6060 Mix Chamber Tip

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 245
Maximum Fluid Working Pressure (MPa): 24.5
Maximum Fluid Working Pressure (psi): 3500

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 03 (.060)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Ove

$3,680.00

Fusion Ap Gun,Round 04

GG 246104

FUSION AP GUN, ROUND 04

Graco 246104 Round Fusion Air-Purge Gun with 04 Mix Chamber and 0.070 in (1.8 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Applicator Type: Manual

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.42875
Component B Inlet Size (in): 9/16-18
Component B Inlet Size (mm): 14.2875
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.178
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.78

For Use With: Non-Flammable Foam and Polyurea

Gun Activation: Manual
Gun Included: 1
Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.070
Impingement Port Size (mm): 1.75
Includes: AR7070 Mix Chamber Tip

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 245
Maximum Fluid Working Pressure (MPa): 24.5
Maximum Fluid Working Pressure (psi): 3500

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 04 (.070)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Ove

$3,680.00

Fusion Ap Gun, .024in Orifice Size, .029in Impingement Port, 8-10in Flat Pattern Size

GG 247111

FUSION AP GUN, AF2929, FT0424

Graco 247111 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 00 (.029)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 8-10 in @ 24 in from target

$3,940.00

Fusion Ap Gun,Af2929,Ft0624

GG 247113

FUSION AP GUN, AF2929, FT0624

Graco 247113 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 00 (.029)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 12-14 in @ 24 in from target

$3,940.00

Fusion Ap Gun,Af5252,Ft0838

GG 247137

FUSION AP GUN, AF5252, FT0838

Graco 247137 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.052 in (1.3 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.097
Fluid Orifice Size (in): 0.038
Fluid Orifice Size (mm): 0.97

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.052
Impingement Port Size (mm): 1.30

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 02 (.052)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 16-18 in @ 24 in from target

$3,940.00

Fusion Mp Gun, Mr3535, Rtm040

GG 247212

FUSION MP GUN, MR3535, RTM040

Graco 247212 Round Pattern Fusion Mechanical Purge Gun with 0.040 in (1.0 mm) Orifice Size and Mix Chamber with 0.035 in (0.89 mm) Impingement Port

Whether youre spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.

Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
Long-lasting PolyCarballoy mix module
Advanced mix module and tip provides superior mixing capabilities

Model: Fusion MP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.42875
Component B Inlet Size (in): 9/16-18
Component B Inlet Size (mm): 14.2875
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.102
Fluid Orifice Size (in): 0.040
Fluid Orifice Size (mm): 1.02

For Use With: Non-Flammable Foam and Polyurea

Gun Activation: Manual
Gun Included: 1
Gun Type: Mechanical-Purge
Gun Weight (g): 1315
Gun Weight (kg): 1.32
Gun Weight (lb): 2.9
Gun Weight (oz): 46.4

Impingement Port Size (in): 0.035
Impingement Port Size (mm): 0.89
Impingement Type: Standard

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 245
Maximum Fluid Working Pressure (MPa): 24.5
Maximum Fluid Working Pressure (psi): 3500

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Module: .035

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.3
Overall Length (in): 7.6
Overall Length (mm):

$4,560.00

Flat Pattern Fusion Mechanical Purge Gun With .024 In Orfice And Mix Chamber With .018 Port

GG 247258

FUSION MP GUN, MF1818, FTM424

Graco 247258 Flat Pattern Fusion Mechanical Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.018 in (0.46 mm) Impingement Port

Whether youre spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.

Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
Long-lasting PolyCarballoy mix module
Advanced mix module and tip provides superior mixing capabilities

Model: Fusion MP
Series: Flat

Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Mechanical-Purge
Gun Weight (g): 1315
Gun Weight (kg): 1.32
Gun Weight (lb): 2.9
Gun Weight (oz): 46.4

Impingement Type: Standard

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Module: .018

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.3
Overall Length (in): 7.6
Overall Length (mm): 193
Overall Width (cm): 7.9
Overall Width (in): 3.1
Overall Width (mm): 79

Pattern Size (in): 10 in @ 24 in from target

$4,560.00

Plural Component

GG 01/1712-D/99N

GG 16R001

FRP RS GEL SYSTEM, XG, 13:1, CART, 25

Graco 16R001 13:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose and Cart

GG 16R005

FRP RS GEL SYSTEM, XG, 17:1, CART, 25

Graco 16R005 17:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose and Cart

GG 16R012

FRP RS GEL SYSTEM, XG, 13:1, CART, 50

Graco 16R012 13:1 Ratio External Mix Gel System with 50 ft (15.2 m) Hose and Cart

GG 16R018

FRP RS GEL SYSTEM, XG, 13:1, CMB, 25

Graco 16R018 13:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose, Cart, Mast, and Boom

GG 16R050

FRP RS GEL SYSTEM, IG, 13:1, CART, NH

Graco 16R050 13:1 Ratio Cart Mounted Internal Mix Gel System

GG 16R109

FRP RS CHOP SYSTEM, XC, 13:1, NO, NH

Graco 16R109 13:1 Ratio External Mix Chop System

GG 16R126

FRP RS CHOP SYSTEM, IC, 13:1, CMB, 35

Graco 16R126 13:1 Ratio Internal Mix Chop System with 35 ft (10.7 m) Hose, Cart, Mast, and Boom

GG 16R135

FRP RS CHOP SYSTEM, IC, 13:1, NO, 25

Graco 16R135 13:1 Ratio Internal Mix Chop System with 25 ft (7.6 m) Hose

GG 16R141

FRP RS CHOP SYSTEM, IC, 13:1, NO, 50

Graco 16R141 13:1 Ratio Internal Mix Chop System with 50 ft (15.2 m) Hose

GG 16R158

FRP RS GEL SYSTEM, XG, 17:1, CMB, 25

Graco 16R158 17:1 Ratio External Mix Gel System with 25 ft (7.6 m) Hose, Cart, Mast, and Boom

GG 16R164

FRP RS GEL SYSTEM, XG, 17:1, CMB, 50

Graco 16R164 17:1 Ratio External Mix Gel System with 50 ft (15.2 m) Hose, Cart, Mast, and Boom

GG 16R179

FRP RS GEL SYSTEM, XG, 17:1, NO, NH

Graco 16R179 17:1 Ratio Cart Mounted External Mix Gel System

GG 16R187

FRP RS GEL SYSTEM, IG, 17:1, CART, 50

Graco 16R187 17:1 Ratio Internal Mix Gel System with 50 ft (15.2 m) Hose and Cart

GG 17H053

REACTOR 2 H-50 PROPORTIONER, 230V, 20KW

Graco 17H053 Reactor 2 H-50 Proportioner, 20 kW, 230 V

GG 17H062

REACTOR 2 H-XP2 PROPORTIONER, SEL, 15KW

Graco 17H062 Reactor 2 H-XP2 Proportioner, 15 kW

GG 17H074

REACTOR 2 H-XP3 PROPORTIONER, 230V, 20KW

Graco 17H074 Reactor 2 H-XP3 Proportioner, 20 kW, 230 V

GG 17H162

REACTOR 2 H-XP2 PROPORTIONER, SEL, 15KW, ELITE

Graco 17H162 Reactor 2 H-XP2 Elite Proportioner, 15 kW

GG 246103

FUSION AP GUN, ROUND 03

Graco 246103 Round Fusion Air-Purge Gun with 03 Mix Chamber and 0.060 in (1.5 mm) Orifice Size

GG 246104

FUSION AP GUN, ROUND 04

Graco 246104 Round Fusion Air-Purge Gun with 04 Mix Chamber and 0.070 in (1.8 mm) Orifice Size

GG 247111

FUSION AP GUN, AF2929, FT0424

Graco 247111 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

GG 247113

FUSION AP GUN, AF2929, FT0624

Graco 247113 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

GG 247137

FUSION AP GUN, AF5252, FT0838

Graco 247137 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.052 in (1.3 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

GG 247212

FUSION MP GUN, MR3535, RTM040

Graco 247212 Round Pattern Fusion Mechanical Purge Gun with 0.040 in (1.0 mm) Orifice Size and Mix Chamber with 0.035 in (0.89 mm) Impingement Port

GG 247258

FUSION MP GUN, MF1818, FTM424

Graco 247258 Flat Pattern Fusion Mechanical Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.018 in (0.46 mm) Impingement Port

Payment options