Plural Component
Precision Flow Unit
GG PF2520
PCF SYSTEM, 016, HTD REG/METER, EP
Graco PF2520 16 Styles 100-240 VAC Precision Flow System with Heated Mastic Regulator, Heated Standard Resolution Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Warm-Melt, Hot-Melt
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 22500
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24
- Maximum Fluid Working Pressure (psi): 3500
- Maximum Operating Temperature ( degree C): 204
- Maximum Operating Temperature ( degree F): 400
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 35
- Maximum Working Pressure
PCF SYSTEM, 256, HTD REG/METER, EP
GG PF3520
PCF SYSTEM, 256, HTD REG/METER, EP
Graco PF3520 256 100-240 VAC Precision Flow System with Heated Mastic Regulator, Heated Standard Resolution Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Warm-Melt, Hot-Melt
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 22500
- Maximum Flow Rate (GPM): 5.94
- Maximum Flow Rate (L/min): 22.5
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24
- Maximum Fluid Working Pressure (psi): 3500
- Maximum Operating Temperature ( degree C): 204
- Maximum Operating Temperature ( degree F): 400
- Maximum Working Pressure (bar): 345
- Maximum Working Press
Assy,Mounting,Pump,Slave,Mix,Internal
GG SSP-160-01
Assy,Mounting,Pump,Slave,Mix,Internal
System, XM70, R, 480,JB,WP,25,E
GG XM7H2E
XM SPRAYER SYSTEM, XM70, R, 480, JB, WP, 25, E
Graco XM7H2E XM70, 480V, Wall Power, Viscon HF Heaters, Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Heated Hose Control
Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.
Application: Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job.- Variable ratio system - handles material ratios from 1:1 to 10:1
- Dosing technology assures accurate, on-ratio mixing for better yield and less waste
- Advanced, intuitive user controls provide real-time display and adjustment of ratio
- Supports multiple spray guns for added productivity
- Model: XM
- Series: 70
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Fluid Inlet Size (in): 1-1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
- Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
- Maximum Air Inlet Pressure (bar): 10.3
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 3
- Maximum Flow Rate (L/min): 11.4
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Mix Ratio: 10:1
- Maximum Operating Temperature ( degree C): 54
- Maximum Operating Temperature ( degree F): 130
- Maximum Working Pressure (bar): 435
- Maximum Working Pressure (MPa): 43.5
- Maximum Working Pressure (psi): 6300
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Mix Ratio: 1:1
- Mix Accuracy (%): 5%
- Power Source: Wall
- Primary Fluid Heater Included: Yes
System, XM70, Skid-HF, 6300 PSI VR Ratio, Includes Haz-Loc, 480 Volt
GG XM7K2E
XM SPRAYER SYSTEM, XM70, R, 480, JB, IS, 25, E
Graco XM7K2E XM70, 480V, Alternator, EX Viscon HF Heaters, EX Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Hose Control
Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.
Application: Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job.- Variable ratio system - handles material ratios from 1:1 to 10:1
- Dosing technology assures accurate, on-ratio mixing for better yield and less waste
- Advanced, intuitive user controls provide real-time display and adjustment of ratio
- Supports multiple spray guns for added productivity
- Model: XM
- Series: 70
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Fluid Inlet Size (in): 1-1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
- Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
- Maximum Air Inlet Pressure (bar): 10.3
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 3
- Maximum Flow Rate (L/min): 11.4
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Fluid Temperature ( degree C): 71
- Maximum Fluid Temperature ( degree F): 160
- Maximum Fluid Viscosity (cP): 20000
- Maximum Mix Ratio: 10:1
- Maximum Operating Temperature ( degree C): 54
- Maximum Operating Temperature ( degree F): 130
- Maximum Working Pressure (bar): 435
- Maximum Working Pressure (MPa): 43.5
- Maximum Working Pressure (psi): 6300
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Mix Ratio: 1:1
- Mix Accuracy (%): 5%
- Power Source: Alternator
- Primary Fluid Heater Included: Yes
PKG RF2 LP AUTO 2K 1R 1H ISO
RR RF2-LA2-01-01-C
PKG RF2 LP AUTO 2K 1R 1H ISO
Payment options
