Parts
MX VALVE, ASSY 050T
GG 562517
MX VALVE, ASSY 050T
Graco 562517 Trabon® MX Divider Valve - MX-50T - 0.050 in³ (0.82 cm³)
Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
- Lubricates large bearings
- Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
- Durable design withstands harsh environments and operating conditions
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 004-050-002
- Model: Trabon
- Series: MX
- Application: In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.050
- Divider Valve Series: MX
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
MX VALVE, ASSY 100S
GG 562540
MX VALVE, ASSY 100S
Trabon® MX Divider Valve - MX-100S - 0.200 in³ (3.28 cm³)Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
Lubricates large bearings Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Lubriquip part number 004-100-001
MD VALVE, FEEDER, 4
GG 562658
MD VALVE, FEEDER, 4
Trabon® MD Mono Block Divider Valve - MD-4The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications
4 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants Lubriquip part number 103-000-151
MSP VALVE, ASSY IND MSP 20T
GG 562739
MSP VALVE, ASSY IND MSP 20T
Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-20T - 0.020 in³ (0.33 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-935
MXP VALVE, TWIN 100T
GG 562816
MXP VALVE, TWIN 100T
Trabon® MXP Modular Divider Valve - MXP-100T - 0.100 in³ (1.64 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-040
MXP VALVE, SINGLE 50S
GG 562820
MXP VALVE, SINGLE 50S
Trabon® MXP Modular Divider Valve - MXP-50S - 0.100 in³ (1.64 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-080
MXP VALVE, SINGLE 150S
GG 562824
MXP VALVE, SINGLE 150S
Trabon® MXP Modular Divider Valve - MXP-150S - 0.300 in³ (4.92 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-120
VALVE, RELIEF, 1/4 NPT, 2500 PSI
GG 563160
VALVE, RELIEF, 1/4 NPT, 2500 PSI
Graco 563160 Automatic Relief Indicator for MX Divider Valves, 2500 psi (172 bar)
Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.
- No time or effort required for reset after blockage is cleared
- Easy information on blocked lines, high system pressure or blocked bearings
- Works with MSP, MX, MXP, MJ and MHH divider valves
- Model: Trabon
- Application: In-Plant Machinery, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.25
- Indicator Type: Automatic Relief Indicators
- Maximum Working Pressure (bar): 172
- Maximum Working Pressure (kPa): 17200
- Maximum Working Pressure (MPa): 17
- Maximum Working Pressure (psi): 2500
- Overall Length (cm): 3
- Overall Length (in): 1.37
- Overall Length (mm): 35
SWIVEL, BALL 1/8 90
GG 563212
SWIVEL, BALL 1/8 90
90º Angle Swivel - 1/8 inch (3.2 mm)90º Angle Swivel - 1/8 inch (3.2 mm)
Lubriquip part number 509-400-000 Trabon part number 9400
INDICATOR, RUPTURE PIN, 1/8 NPTF, 5500 PSI
GG 563223
INDICATOR, RUPTURE PIN, 1/8 NPTF, 5500 PSI
Trabon® Replacement Rupture Indicator, 1/8-27 NPTF, 5500 psi (379 bar)Trabon Performance Indicators are pressure-sensitive devices that pinpoint excessive pressure in Trabon series progressive lubricating systems. These devices, which are installed in the alternate outlet ports of divider valves, signal a fault either by causing an indicator pin to protrude or by releasing lubricant to the atmosphere. All Performance Indicators respond quickly to protect the lube system and locate lube line blockage.
Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar). High pressure from blockage causes a disc to rupture. Lubricant forces an indicator pin to protrude, indicating the blockage. High pressure backs up through the system and trips a switch to shut the system off. When fault is corrected, disc must be replaced and pin reset. Divider Valve Rupture Indicators w/Memory - 5,500 psi (379 bar) Lubriquip part number 509-499-140 Trabon part number 9499-14
BLOCK, END MACH MX
GG 563287
BLOCK, END MACH MX
Graco 563287 Trabon® MX Divider Valve - MX End
Application: For use with Trabon® MX Divider Valves.
- MX end
- Lubriquip part number 510-921-004
- Model: Trabon
- Series: MX
- Application: In-Plant Machinery
KIT, CROSSPORT, MSP, LH, CS
GG 563470
KIT, CROSSPORT, MSP, LH, CS
Trabon® MSP Divider Valve - Left Cross Port Bar For use with Trabon® MSP Divider Valves. Left Cross Port Bar - 1 outlet port plug is required for each cross port bar Lubriquip part number 527-005-330
BLOCK, SECT END ASSY MXP
GG 563518
BLOCK, SECT END ASSY MXP
Trabon® MXP Divider Valve - End Section For use with Trabon® MXP Divider Valves. End section Lubriquip part number 527-300-090
BLOCK, BSPLT INTERM MXP 1/4 NPSF
GG 563519
BLOCK, BSPLT INTERM MXP 1/4 NPSF
Graco 563519 Trabon® MXP Divider Valve - Intermediate Base Plate - NPSF
Application: For use with Trabon® MXP Divider Valves.
- Intermediate Base
- Must be ordered in multiples of 2
- 1/4-18 NPSF
- Model: Trabon
- Series: MXP
- Application: In-Plant Machinery
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPSF
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Type: NPSF
SWIVEL, BEARING, 90DEG, 1/2 NPT
GG 564350
SWIVEL, BEARING, 90DEG, 1/2 NPT
Ball Bearing 90º Angle Swivel - 1/2 inch (12.7 mm)90º Angle Swivel - 1/2 inch (12.7 mm)
Lubriquip part number 503-706-001
ADAPTER, OUTLET TO HAND PUMP
GG 571167
ADAPTER, OUTLET TO HAND PUMP
Pump Outlet Adapter For use with G-Series Pumps and G3 Grease Gun.
MODULE, INJ, 24V, HP, 60#, TANK, F, LL
GG 77X104
MODULE, INJ, 24V, HP, 60#, TANK, F, LL
Graco 77X104 Electric Dyna-Star® HP 24 VDC Injector Module with Pump, Tube-in-Tube, Vent Valve, Follower Plate, LL Kit, Cover, Tank for 60 lb (27 kg). Reservoir
The Dyna-Star HP and HF 24VDC Electric Lubrication Pumps complement our Dyna-Star 10:1 Hydraulic and Fire-Ball 300 50:1 Pneumatic pump offering. For heavy-duty construction and mining equipment, rely on the Electric Dyna-star to supply fresh lubricant and flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.
Application: For use in mining operations, milling and crushing, heavy-duty construction, well services, and industrial.- High-quality helical hardened steel gears are lubricated for life and sealed to keep contaminants out for longer lasting performance.
- Ability to adjust motor controls like power input, motor speed, current control and signal input to perfectly match the pump to your application and environmental changes.
- Mechanical auto-fill shutoff and remote-mounted fill port ensures clean and efficient refills.
- IP69K rated
- Built-in pressure relief for safety and compact, efficient installations.
- Cavitation-free fill and vent path provides simple and direct venting and filling to the foot of the pump.
- Built-in lift ring is rated to 500 lbs (226 kg).
- Strong 12 gauge steel reservoir, 60 lb (27 kg) size.
- AC to DC Converter Box for fixed and in-plant applications.
- Model: Dyna-Star
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Application: In-Plant Machinery, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Single Line Parallel
- Fluid Outlet Size (in): 0.375
- Fluid Outlet Size (mm): 9.5250
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Includes: HP Pump 24 VDC, tube-in-tube, Vent Valve, cover, 60 lb. reservoir
- IP Rating: IP69K
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
- Minimum cST Grade (cST): 40
- Overall Height (cm): 77.5
- Overall Height (in): 30.5
- Overall Height (mm): 775
- Overall Width (cm): 36.8
- Overall Width (in): 14.5
- Overall Width (mm): 368
- Power Connection Type: M12
- Power Type: Pneumatic
KIT, STDRUM, 24VDC, HF, 400#
GG 77X122
KIT, STDRUM, 24VDC, HF, 400#
Graco 77X122 Standard Drum Kits - 24 VDC HF Pump and Cover for 400 lb (180 kg). Reservoir
The Dyna-Star HP and HF 24VDC Electric Lubrication Pumps complement our Dyna-Star 10:1 Hydraulic and Fire-Ball 300 50:1 Pneumatic pump offering. Now you have three power source options for automatic lubrication systems and transfer applications. Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.
Application: Electric pumps for heavy duty automatic lubrication and transfer systems.- Auto Fill Shut Off - mechanical shut off of fill pump for clean and efficient refill
- Graco Advantage Drive™ - heavy duty gear drive-lubed for life
- Tube-in-tube vent and fill path - convert drum to injector system instantly
- Motor control - speed and AMP control
- Cold weather performance (-40º C)
- More efficient seal replacement
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Application: In-Plant Machinery, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Single Line Parallel
- Fluid Outlet Size (in): 0.375
- Fluid Outlet Size (mm): 9.5250
- Fluid Outlet Thread Type: NPT
- Includes: HF Pump 24 VDC, Cover for 120 lb (54 kg) reservoir
- IP Rating: IP69K
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
- Minimum cST Grade (cST): 40
- Overall Height (cm): 112.5
- Overall Height (in): 44.3
- Overall Height (mm): 1125
- Overall Width (cm): 27.9
- Overall Width (in): 11
- Overall Width (mm): 279
- Power Connection Type: M23
- Power Type: Pneumatic
G-FORCE II TIP, SPRAY, Q-TYPE
GG 805538
G-FORCE II TIP, SPRAY, Q-TYPE
Washer Spray Tip, 4003 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power.40 Degree Washing Tip
- Wide spray for washing or rinsing a large area.
G-FORCE II TIP, SPRAY, Q-TYPE
GG 805549
G-FORCE II TIP, SPRAY, Q-TYPE
Graco 805549 Washer Spray Tip, 25045
Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power.
- 25 Degree Flushing Tip
Most common nozzle for general cleaning.
- Model: G-Force II
- Series: Washer Spray Tip
- Color: Green
- Connection Size (in): 0.25
- Connection Type: Quick Disconnect
- For Use With: AquaMax, G-Force, G-Force II, Hydra-Clean
- Material: Stainless Steel
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Nominal Size: 25045
- Orifice Diameter (in): 0.045
PROMIX PD2K PROPORTIONER, SYS, PD1K, AUTO, DP
GG AC0502
PROMIX PD2K PROPORTIONER, SYS, PD1K, AUTO, DP
Graco AC0502 ProMix PD2K Automatic Proportioner, Dual Panel, Control Module Only
100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.
- Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
- Faster color changes and less material to flush mean less waste and less downtime
- Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
- Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps
- Model: ProMix
- Series: PD2K
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Applicator Type: Automatic
- Component Type: Single Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Automatic
- Material Type: Single Component
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 16
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (MPa): 0.7
- Maximum Working Pressure (psi): 100
- Measuring Type: Meter
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: Up to 4
- Number of Color Valves: N/A
- Number of Resin Colors: Up to 30
- Power Source: Electric
- Pressure Type: Low or High Pressure
- Proportioner Type: Automatic
- Proportioning Type: Automatic Electronic
RAC X FFLP TIP, SPRAY, (108)
GG FFLP108
RAC X FFLP TIP, SPRAY, (108)
Graco FFLP108 Fine Finish Low Pressure RAC X FF LP SwitchTip, 108
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 108 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch fann pattern and has a 0.008 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
Application: For fine finish applications- Less Prep & Cleanup Time
Less mess with less overspray
Put the paint where you want it
- Easiest Pattern Overlap
Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality
- Extended Life
Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life
- Best Tip on the Market
Works with any airless sprayer
Longest lasting fann pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: FF LP SwitchTip
- Compatible Material: Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent borne Paints
- For Use With: RAC X HandTite Tip Guard
- Material: Tungsten Carbide
- Maximum Fan Width (cm): 5
- Maximum Fan Width (in): 2
- Maximum Fan Width (mm): 102
- Maximum Flow Rate (GPM): 0.07
- Maximum Flow Rate (L/min): 0.26
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 2
- Minimum Fan Width (mm): 51
- Orifice Diameter (in): 0.008
- Pattern Size (in): 2 to 4
- Pattern Size (mm): 50.8 to 101.6
RAC X FFLP TIP, SPRAY, (110)
GG FFLP110
RAC X FFLP TIP, SPRAY, (110)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 110 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 110 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch Fan pattern and has a 0.010 inchorifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
RAC X FFLP TIP, SPRAY, (112)
GG FFLP112
RAC X FFLP TIP, SPRAY, (112)
Graco FFLP112 Fine Finish Low Pressure RAC X FF LP SwitchTip, 112
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 112 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch Fan pattern and has a 0.012 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
Application: For fine finish applications- Less Prep & Cleanup Time
Less mess with less overspray
Put the paint where you want it
- Easiest Pattern Overlap
Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality
- Extended Life
Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life
- Best Tip on the Market
Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: FF LP SwitchTip
- Compatible Material: Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent borne Paints
- For Use With: RAC X HandTite Tip Guard
- Material: Tungsten Carbide
- Maximum Fan Width (cm): 5
- Maximum Fan Width (in): 2
- Maximum Fan Width (mm): 102
- Maximum Flow Rate (GPM): 0.15
- Maximum Flow Rate (L/min): 0.57
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 2
- Minimum Fan Width (mm): 51
- Orifice Diameter (in): 0.012
- Pattern Size (in): 2 to 4
- Pattern Size (mm): 50.8 to 101.6