INGERSOLL-RAND IR TOOL S12880
Silverair Cylinder, (1-3/4 x 2)
AA SD17-P4B4-020
Silverair Cylinder, (1-3/4 x 2)
Silverair Cylinder, 2in Bore X 12in Stroke
AA SD20-PBB4-120
Silverair Cylinder, 2in Bore X 12in Stroke
Cylinder, 1-1/16 x 4 In. Stroke
AA SS11-P4B4-040
Cylinder, 1-1/16 x 4 In. Stroke
2-Way Valve, BR, DIR, Buna Tb045B-024-D
AA TB045B-024-D
2-Way Valve, BR, DIR, Buna Tb045B-024-D
2-Way Valve, BR, PIL, Buna Tb04Eb-120-A
AA TB04EB-120-A
2-Way Valve, BR, PIL, Buna Tb04Eb-120-A
3/8in Club Style Ratchet
IR 109XPA
3/8in Air Ratchet Wrench, 76 ft-lb Torque, 220 RPM
Description: The 109XPA ratchet wrenches provide an optimized gear ratio and airflow for exceptional performance and durability with 76 ft-lb maximum torque. The 109 model offers a 1/2in drive, while the 1099 model sports a version.
Features And Benefits:
- Maximum Torque: 76 ft.-lbs. maximum torque at 300 rpm free speed.
- 360-Degree Exhaust: The adjustable exhaust on the 109XPA high torque ratchet wrenches directs air flow away from you and your workspace.
- Low Profile Forward/Reverse Control: The 109XPA forward/reverse control has a wide diameter for increased ease of use in confined spaces.
- Increased Reach: Enjoy easier access to deep, hard to reach spaces with these high torque ratchet wrenches.
- Exceptional Durability: Exclusive IR Twin Pawl Plus head design for exceptional durability.
Product Application and Uses:
To remove and install threaded fasteners.
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Button
- Air Consumption (cfm): 24
- Air Consumption (l/min): 680
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Average Air Consumption (cfm): 4
- Average Air Consumption (l/min): 113
- Color: Silver
- Configuration/Handle Type: Right Angle
- Drive Size (in): 3/8
- Duty Rating: Industrial Duty
- Exhaust Location: Side - Adjustable
- Handle Material: Aluminum
- Housing Material: Aluminum
- Max Bolt Capacity Sae Grade 5 Bolt Diameter (in): 1/2
- Max Free Speed (rpm): 220
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 76
- Max Torque (in-lb): 912
- Max Torque (nm): 103
- Min Hose Size (in): 3/8
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 12
- Product Width (in): 2.16
- Product Height (in): 1.84
- Product Weight (lb): 3.3
- Recommended Forward Torque Range (ft-lb): 10-60
- Recommended Forward Torque Range (in-lb): 124-717
- Recommended Forward Torque Range (nm): 14-81
- Retainer Type: Ball
- Reversible: Reversible
- Side to Center Distance (in): 1.08
- Side to Center Distance (mm): 27
- Sound Pressure/Power Db(A): 92.4 / 103.4
- Speed Setting: Variable Speed
- Standards/Certifications: All Gov Regulations And Fda Certified
- Vibration Level (m/s2): 2.5
- Warranty: 1-year
- Accessories: 109-BOOT
- Lubrication: 10G
- Lubrication: 10P
- Parts: 109XPA-TK
- Parts: 109XPA-TK1
- Parts: 109XPA-TRK1
Case Asm (48951-11)
IR 1702-A727
Hammer Assembly Service Part for Ingersoll Rand Impact Wrench
- For Use With: 211
Lever Throttle Scaler
IR 172L
Air Chisel Scaler, 5500 BPM, 9/16" Stroke
Description: At 5,500 blows per minute, this lever-operated chisel scaler is not only fast, but extremely durable and efficient.
Features And Benefits:
- Easy Adjustment: The adjustable bayonet-type needle housing lock allows for easy adjustment without special tools.
- Durability: These scalers feature a rubber faced throttle valve to ensure positive sealing of internal components, along with a strengthened head block that will hold up in tough conditions.
- Comfort: Compact, well balanced and low vibration maximize operators comfort
Product Application and Uses:
Remove Paint, Rust, Dirt, Weld Slags
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Lever
- Air Consumption @ Load (cfm): 12
- Air Consumption @ Load (l/min): 340
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Blows per Min: 5500
- Bore Diameter (in): 0.94
- Color: Silver
- Configuration/Handle Type: Straight
- Duty Rating: Heavy Duty
- Housing Material: Steel
- Max Pressure (bar): 6.2
- Min Hose Size (in): 5/16
- Non Sparking: No
- Power Source: Air Powered
- Product Length (in): 12.7
- Product Width (in): 6.2
- Product Height (in): 2.2
- Shank SIze (in): .5
- Shank Type: Ingersoll Rand Shank
- Sound Pressure/Power Db(A): 107.5 / 118.5
- Stroke Length (in): 0.56
- Vibration Level (m/s2): 11.6
- Warranty: 1-year
- Accessories: WF-14-12
- Accessories: WF-14A-007
- Accessories: WF-14B-007
- Accessories: WF-14B-012
- Accessories: WF-14C-007
- Accessories: WF-14C-012
- Accessories: WF-14C-018
- Accessories: WF-14D-007
- Accessories: WF-14D-012
- Accessories: WF-14D-018
- Accessories: WF-14F-12
- Accessories: WF-14F-18
- Accessories: WF-14F-7
- Lubrication: 10G
- Lubrication: 10P
- Parts: NS11-27
- Parts: NS11-A24
Tool Boot
IR 2015-BOOT
Protective Boot for 2015MAX and 2025MAX Series Impact Wrenches
Description: Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.
Features And Benefits:
- Protects surrounding surfaces from scratches, nicks ect.
- Protects tool from damage if dropped.
- Adds further protection from unwanted contaminates that can affect tool performance.
- Color: Grey
- For Use With: 2015MAX
- For Use With: 2025MAX
Air Ratchet, R/A, Low Profile, 3/8 SQ DR
IR 2015MAX
3/8" Air Impact Wrench, 180 ft-lb Torque, Friction Ring Retainer, Right Angle
Description: This revolutionary product is unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.
Features And Benefits:
- Max Power: With 180 ft-lbs of max torque and 9000 rpm, this tool offers more than twice the power of the leading competitor's ratchet.
- Max Control: A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control.
- Max Access: A head height of under 2" and reactionless torque allow you to safely use this powerful tool in tight spaces.
- Feather touch trigger, 2-position forward power regulator, forward/reverse ring
- Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench.
- Ergonomically sound rear exhaust system.
- Offers the same reach as a ratchet.
- Optimized for the vehicle repair industry, body shops, and MRO.
- 1-year warranty.
Product Application and Uses:
Designed to remove and install threaded fasteners. Optimized for the vehicle repair industry, body shops, and MRO
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 19
- Air Consumption @ Load (l/min): 538
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 2100
- Color: Grey
- Configuration/Handle Type: Right Angle
- Drive Size (in): 3/8
- Drive Type: Square
- Duty Rating: Maintenance Duty
- End Plates: Aluminum with Hard-coating
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 94.1 / 105.1
- Hammer Case: Aluminum
- Handle Material: Composite
- Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
- Impact Mechanism: Single Hammer
- Impacting Sound Pressure/Power Db(A): 96.6 / 107.6
- Max Bolt Diameter (in): 0.4375
- Max Free Speed (rpm): 9000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 180
- Max Torque (in-lb): 2160
- Max Torque (nm): 244
- Min Hose Size (in): 3/8
- Motor: Reverse Bias
- Number of Power Settings: 2
- Power Source: Air Powered
- Product Length (in): 13.1
- Product Width (in): 2.2
- Product Height (in): 3.1
- Product Weight (lb): 3.4
- Recommended Forward Torque Range (ft-lb): 45-140
- Recommended Forward Torque Range (in-lb): 540-1682
- Recommended Forward Torque Range (nm): 61-190
- Recommended Reverse Torque (ft-lb): 45-160
- Recommended Reverse Torque (nm): 61-217
- Retainer Type: Friction Ring
- Side to Center Distance (in): 1.1
- Side to Center Distance (mm): 28
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 17.4
- Warranty: 2-year
Anvil Assembly
IR 2112-A726
Anvil Assembly Replacement Part for Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact Wrenches
- For Use With: 2125QTIMAX
- For Use With: 2125QTIMAX-AP
3/8in Impact Wrench
IR 2115PTIMAX
3/8in Air Impact Wrench, 300 ft-lb Torque, Titanium Hammercase, Pin Retainer, Pistol
Description: The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.
Features And Benefits:
- Durable: With a titanium hammer case and composite housing, this wrench can withstand anything, including repeated drops and harsh environments. In fact, we provide a 2-year warranty to prove it.
- Versatile: This tool is so versatile, it can be used in just about any market.
- Reliable This wrench has been tested and is guaranteed to last. It'll deliver the same level of power every time.
- Easier access to grease fitting - for quicker maintenance and less downtime
- Enhanced socket retention
- 7-vane Motor delivers added power with less weight
- Finely tuned twin hammer impact mechanism and motor deliver more torque, durability, and efficiency
- Feather-touch trigger provides maximum control of this air impact wrench
- Anodized end plate for enhanced durability
- Pin anvil ensures positive socket retention
- Optimized for the vehicle repair industry, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, and construction
- Patented one-hand forward/reverse control for easy operation
- Optimized air flow for maximized performance when using this pneumatic impact wrench
Product Application and Uses:
General Industrial, Facility Maintenance
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 17
- Air Consumption @ Load (l/min): 481
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 4
- Average Air Consumption (l/min): 113
- Blows per Min: 1500
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/8
- Drive Type: Square
- Duty Rating: Maintenance Duty
- End Plates: Aluminum with Hard-coating
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 89.7 / 100.7
- Hammer Case: Titanium
- Handle Material: Composite
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 93.2 / 104.2
- Max Bolt Diameter (in): 7/16
- Max Free Speed (rpm): 15000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 300
- Max Torque (in-lb): 3602
- Max Torque (nm): 407
- Min Hose Size (in): 3/8
- Motor: Reverse Bias
- Number of Power Settings: 4
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 120.9
- Product Length (in): 5.9
- Product Width (in): 2.2
- Product Height (in): 6.7
- Product Weight (lb): 2.48
- Recommended Forward Torque Range (ft-lb): 250
- Recommended Forward Torque Range (in-lb): 3000
- Recommended Forward Torque Range (nm): 339
- Retainer Type: Pin Detent
- Side to Center Distance (in): 1.1
- Side to Center Distance (mm): 28
- Special Features: Titanium hammercase, 2-year Max warranty
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Too
Tune-Up Kit
IR 2175MAX-TK1
Tune-up Kit for Ingersoll Rand 2175 Series Air Impact Wrench
- Includes: inlet parts kit, O-rings, springs, dentent pin, gaskets, cylinder dowl, bearings and vane pack.
- For Use With: 2175MAX
- For Use With: 2175MAX-6
Hammer Case (1720B)
IR 261B-A727
Hammer Case for Ingersoll Rand 261, 271 Series Impact Wrench
- For Use With: 261
- For Use With: 261-3
- For Use With: 261-6
- For Use With: 271
Retainer
IR 341SR-A124
Retainer Replacement Part for Ingersoll Rand 341, 441 Series Air Tamper
Dead Handle
IR 3940-48
Dead Handle for Ingersoll Rand 3940, 3942, 3955 Series Impact Wrench
1 In. Sq. Drive Impact, 6000 Rpm
IR 3940B2TI
1" Air Impact Wrench, Super Duty, 2750 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
Description: With a titanium hammer case, bronze end plates and torque up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.
Features And Benefits:
- Power: High torque output of 2750 ft-lbs and 800 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses:
Heavy Industry, Oil&Gas, Foundry
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 64
- Average Air Consumption (l/min): 1812
- Blows per Min: 800
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
- Max Bolt Diameter (in): 1-3/8
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 2750
- Max Torque (in-lb): 33004
- Max Torque (nm): 3729
- Min Hose Size (in): 3/4
- Motor: Reverse Bias
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
- Product Length (in): 13.5
- Product Weight (lb): 21.2
- Quiet Tool: No
- Recommended Forward Torque Range (ft-lb): 500-1800
- Recommended Forward Torque Range (in-lb): 6001-21596
- Recommended Forward Torque Range (nm): 678-2440
- Retainer Type: Thru-hole
- Special Features: Titanium hammercase
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 13.1
- Vibration Uncertainy K* (m/s2): 1.6
- Warranty: 1-year
- Accessories: SK8H9TN
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2940-726
- Parts: 3934-123
- Parts: 3940-TK1
Body (48951-136)
IR 402-565
Inlet Bushing for Ingersoll Rand 231, 211, 212, 1702, 215G Impact Wrench
Payment options
