INGERSOLL-RAND IR TOOL S12880
Vane Kit, G3 Series
IR AG3-42-4
Vane Pack, Set of 4 for Ingersoll Rand G3 Series Air Grinder
3/4in and 1/2in Std, 2pc Set
IR AK62H
DXS2 1/2in and 3/4" Drive Standard Anvil 2 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 2-Piece DXS2 Set, (1) 1/2in Drive Standard Anvil and (1) 3/4" Drive Standard Anvil
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Retainer Type: Friction Ring
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- Bundle Kit: A41H:1
- Bundle Kit: A61H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
1/2in Pin Anvil Accessory
IR AP41H
DXS2 1/2 inch Drive Pin Anvil Attachment
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: (1) DXS2 1/2 inch Drive Pin Anvil
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Product Length (in): 1.9586614173228347
- Product Width (in): 0.8267716535433072
- Product Height (in): 0.8267716535433072
- Product Weight (lb): 0.17637
- Retainer Type: Pin Detent
- Warranty: 1-year
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
O-Ring
IR BBFM-557
Socket Retaining Ring for Ingersoll Rand 271, 285B, 295A, 2171XP Series 1" Drive Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 271, 285B, 295A and 2171XP impact Wrenches.
- For Use With: 2171XP
- For Use With: 271
- For Use With: 285B
- For Use With: 285B-6
- For Use With: 285B-6-AP
- For Use With: 295A
Beam Clamp - 1 Ton -Bct Series
IR BCT-1
Beam Clamp, 1 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 10 Ton - Bct Series
IR BCT-10
Beam Clamp, 10 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 3 Ton -Bct Series
IR BCT-3
Beam Clamp, 3 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 2 Ton -Bct Series
IR BCT-2
Beam Clamp, 2 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 5 Ton - Bct Series
IR BCT-5
Beam Clamp, 5 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Hose Per Ft, Specify Length, Non-Returnable Part
IR BH6C
Hose Per Ft, Specify Length, Non-Returnable Part
Spring Balancer , 22-33 lbs.
IR BHD-15
Heavy Duty Spring Balancer, 22-33 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 22 - 33
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 22.7
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Heavy-Duty Balancer 33-44 lbs
IR BHD-20
Heavy Duty Spring Balancer, 33-44 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 33 - 44
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 23.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer, 55-66 Lbs
IR BHD-30
Heavy Duty Spring Balancer, 55-66 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 55 - 66
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 25.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BHD-65
Heavy Duty Spring Balancer, 121-143 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 121 - 143
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 30
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Battery, Iqv20V 2.5Ah
IR BL2012
IQV20 20V 2.5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
Description: The BL2012 IQV20 Series High Capacity r2.5 lithium ion battery delivers a high-charge capacity with low internal impedance for maximum power delivery and run-time. The intelligent Battery Management System allows the battery to communicate with the tool and charger to offer triple battery protection. The slim pack design is fully compatible with our charger.
Features And Benefits:
- Performance: The BL2012 20V 2.5Ah battery delivers 95% longer run time than its predecessor the BL2005 (That's over 221 lug nuts when used with the W5130!). And at the same size and weight as the previous model you can get more work done on a single charge.
- Durability: The intelligent Battery Management System (BMS) allows the battery to communicate with the tool and charger to offer triple battery protection prevent over loading over charging and over discharging for longer tool and battery life.
- Versatility: The BL2012 2.5Ah batteries slim design allows you to go further with less in your way. Its light weight doesn't compromise power letting you keep working on big jobs with a slimmer tool.
- Battery Fuel Gauge - 4 light positions
- Quick charging feature in one hour or less
Product Application and Uses:
IQV20 Series cordless tools
- Battery Capacity (Ah): 2.5
- Battery Capacity (Wh): 49
- Charge Time: 40 minutes
- Color: Grey
- Number of Battery Cells: 5
- Power Source: Battery Powered
- Product Length (in): 4.8
- Product Width (in): 3.1
- Product Height (in): 2.1
- Product Weight (lb): 0.95
- Voltage DC: 20
- Warranty: 2-year
- Battery Type: Tabbed
- Accessories: BC1124
- Accessories: BC1124-EU
- Accessories: BC1221
- Accessories: BC1221-EU
- Accessories: BL2005-BOOT
- Accessories: BC1124-CN
- Accessories: BC1124-JP
- Accessories: BC1124-ANZ
- Accessories: BC1124-KR
- For Use With: D3141
- For Use With: D3141-K22
- For Use With: D3141-K22-AP1
- For Use With: D3141-K22-AR
- For Use With: D3141-K22-BR
- For Use With: D3141-K22-CN
- For Use With: D3141-K22-EU
- For Use With: D3141-K22-IN
- For Use With: D3141-K22-JP
- For Use With: D3141-K22-KR
- For Use With: D3411
- For Use With: D3411-K22
- For Use With: D3411-K22-AP1
- For Use With: D3411-K22-CN
- For Use With: D3411-K22-EU
- For Use With: D3411-K22-IN
- For Use With: D3411-K22-JP
- For Use With: G4621
- For Use With: IQV20-K201
- For Use With: QCN2A30S6
- For Use With: QCN2P02Q4
- For Use With: QCN2P08Q4
- For Use With: QCN2P12Q4
- For Use With: QCP2A30S6
- For Use With: QCP2A30S6-K2-CN
- For Use With: QCP2A30S6-K2-EU
- For Use With: QCP2A30S6-K2-IN
- For Use With: QCP2P02Q4
- For Use With: QCP2P04Q4
- For Use With: QCP2P04Q4-K2-CN
- For Use With: QCP2P04Q4-K2-EU
- For Use With: QCP2P04Q4-K2-IN
- For Use With: QCP2P08Q4
- For Use With: QCP2P08Q4-K2-CN
- For Use With: QCP2P08Q4-K2-EU
- For Use With: QCP2P08Q4-K2-IN
- For Use With: QCP2P12Q4
- For Use With: QCP2P12Q4-K2-CN
- For Use With: QCP2P12Q4-K2-EU
- For Use With: QCP2P12Q4-K2-IN
- F
Battery, 20V, 5.0Ah
IR BL2022
IQV20 20V 5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
Description: The BL2022 IQV20 Series High Capacity x5.0 Battery delivers unmatched performance with 68% longer run time and the same size and weight as its predecessor. Fully compatible with all existing IQV20 tools and chargers and equipped with the same intelligent Battery Management System (BMS) we make sure you get more out of every volt.
Features And Benefits:
- Power: High Capacity 20V 5.0Ah battery delivers longer run time to get more work done on a single charge.
- Optimization: Intelligent Battery Management System protects against over loading, over charging and over discharging for longer tool and battery life.
- Compatibility: BL2022 5.0Ah battery is compatible with all IQV20 series power tools and 20V battery charger allowing you to swap batteries and tools to get the job done right every time.
- Performance: The BL2022 Lithium-Ion 20V 5.0Ah battery delivers 66% longer run time than its predecessor (That's over 800 lug nuts when used with the IR W7150 cordless impact wrench).
- Battery Fuel Gauge - 4 light positions.
- Quick charging feature in one hour or less.
Product Application and Uses:
IQV20 Series cordless tools
- Battery Capacity (Ah): 5
- Battery Capacity (Wh): 100
- Charge Time: 80 minutes
- Color: Grey
- Number of Battery Cells: 10
- Power Source: Battery Powered
- Product Length (in): 4.8
- Product Width (in): 3.1
- Product Height (in): 2.8
- Product Weight (lb): 1.61
- Voltage DC: 20
- Warranty: 2-year
- Battery Type: Tabbed
- Accessories: BC1124
- Accessories: BC1221
- Accessories: BL2010-BOOT
- For Use With: C5101
- For Use With: D3141
- For Use With: D3141-K22
- For Use With: D3141-K22-AR
- For Use With: D3141-K22-BR
- For Use With: D3141-K22-CN
- For Use With: D3141-K22-EU
- For Use With: D3141-K22-IN
- For Use With: D3141-K22-JP
- For Use With: D3141-K22-KR
- For Use With: D3411
- For Use With: D3411-K22
- For Use With: D3411-K22-AP1
- For Use With: D3411-K22-CN
- For Use With: D3411-K22-EU
- For Use With: D3411-K22-IN
- For Use With: D3411-K22-JP
- For Use With: D5140-K22-EU
- For Use With: D5241
- For Use With: D5241-K22
- For Use With: D5241-K22-AP1
- For Use With: D5241-K22-AR
- For Use With: D5241-K22-BR
- For Use With: D5241-K22-CN
- For Use With: D5241-K22-EU
- For Use With: D5241-K22-IN
- For Use With: D5241-K22-JP
- For Use With: D5241-K22-KR
- For Use With: G5351
- For Use With: G5351-K22
- For Use With: G5351M
- For Use With: G5351M-K22-AP
- For Use With: G5351M-K22-AR
- For Use With: G5351M-K22-BR
- For Use With: G5351M-K22-EU
- For Use With: G5351M-K22-IN
- For Use With: G5351M-K22-JP
- For Use With: QCN2A30S6
- For Use With: QCN2P02Q4
- For Use With: QCN2P08Q4
- For Use With: QCN2P12Q4
- For Use With: QCP2A30S6
- For Use With: QCP2A30S6-K2-CN
- For Use With: QCP2A30S6-K2-EU
- For Use With: QCP2A30S6-K2-IN
- For Use With: QCP2P02Q4
- For Use With: QCP2P04Q4
- For Use With: QCP2P04Q4-K2-CN
- For Use With:
Lt-Dty Balancer, 0.9-2.2 Lb, 5.2ft Cbl
IR BLD1
Light Duty Ergonomic Tool Balancer, 0.9-2.2 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 0.88 - 2.20
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
- For Use With: 1RLNS1
- For Use With: 1RPLS1
- For Use With: 1RPMS1
- For Use With: 1RPNS1
- For Use With: 1RPQS1
- For Use With: 7RAMC1
- For Use With: 7RAMC1-EU
Md-Dty Balancer, 13.2-17.6 Lb, 6.5ft Cbl
IR BMDS-8
Medium Duty Short Cable Spring Balancer, 13.2-17.6 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 13.2 - 17.6
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 3.4
- Product Weight (lb): 5.5
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 4.4-8.8 Lb, 6.5ft Cbl
IR BMDS-4
Medium Duty Short Cable Spring Balancer, 4.4-8.8 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 4.4 - 8.8
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 4.1
- Product Weight (lb): 4.4
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Balancer Control Kit Inline Handle
IR BW-IH-KIT
Balancer Control Kit Inline Handle
Md-Dty Balancer, 8.8-13.2 Lb, 6.5ft Cbl
IR BMDS-6
Medium Duty Short Cable Spring Balancer, 8.8-13.2 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 8.8 - 13.2
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 5.1
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Lt-Dty Balancer, 4.4-6.6 Lb, 5.2ft Cbl
IR BLD3
Light Duty Ergonomic Tool Balancer, 4.4-6.5 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 4.4 - 6.6
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Clip
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
Md-Dty Balancer, 2.2-5.5 Lb, 6.5ft Cbl
IR BMDS-2
Medium Duty Short Cable Spring Balancer, 1.0-2.5lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Cable Material: Stainless steel
- Capacity (lb): 2.2 - 5.5
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 4.1
- Product Weight (lb): 4.4
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 17.6-22 Lb, 8.2ft Cbl
IR BMDLN-10
Medium-Duty Long Spring Cable Balancer, 17.6-22 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 17.6 - 22
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 7.5
- Reel Height (in): 15
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 22-30 Lb, 8.2ft Cbl
IR BMDLN-12
Medium-Duty Long Spring Cable Balancer, 22-30 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 22 - 30
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 8.7
- Reel Height (in): 15
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Lt-Dty Balancer, 2.2-4.4 Lb, 5.2ft Cbl
IR BLD2
Light Duty Ergonomic Tool Balancer, 2.2-4.4 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 2.2 - 4.4
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
O-Ring (023446) Same
IR CE110-210
O-Ring Replacement Part for Ingersoll Rand 1702, 211, 212, 215G Series Impact Wrench
Hoist Assembly - 1/8 T
IR CL125K-2C10-C6
CL125K-2C10-C6 Air Hoist, 275 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 275
Lift (ft): 10
Hoist, Air, 1/8 Ton, Clk Series, Steel Hooks, 10' Lift, 6' Drop
IR CL125K-2DA10-C6U
CL125K-2DA10-C6U Air Hoist, 275 Lb Capacity, 10ft Lift, Pendant Control, Trolley Mount, Fabric Chain Container
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Includes:
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 275
Lift (ft): 10
Balancer
IR BMDLLN-8
Medium-Duty Locking Long Cable Spring Balancer, 13.2-17.6 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Equipped with a ratchet locking device to prevent load from retracting when cable is extended
- Safety device against load dropping due to the spring breakage (>3 kg)
- Cable Material: Stainless steel
- Capacity (lb): 13.2 - 17.6
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Width (in): 7.1
- Product Weight (lb): 7.6
- Reel Height (in): 15
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Hoist, 275 Lbs Capacity, Pendent Control
IR CL125K-2C10-C6U
CL125K-2C10-C6U Air Hoist, 275 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount, Fabric Chain Container
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Includes:
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 275
Lift (ft): 10
1/4 Ton Air Hoist, 10 Ft Lift, 6 Ft Drop, Fabric Chain Container
IR CL250K-2C10-C6U
CL250K-2C10-C6U Air Hoist, 550 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount, Fabric Chain Container
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Includes:
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 550
Lift (ft): 10
Hoist, Air, 550lb
IR CL250K-2C15-C11U
CL250K-2C15-C11U Air Hoist, 550 Lb Capacity, 15ft Lift, Pendant Control, Hook Mount, Fabric Chain Container
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Includes:
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 550
Lift (ft): 15
Cl500K-2C10-C6 : Hoist Assembly - 1/2 T
IR CL500K-2C10-C6
CL500K-2C10-C6 Air Hoist, 1100 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 1100
Lift (ft): 10
1/2 Ton Hoist, Pendant Control
IR CL500K-2C10-C6U
CL500K-2C10-C6U Air Hoist, 1100 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount, Fabric Chain Container
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Includes:
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 1100
Lift (ft): 10
3/4" Pneumatic Impact
IR 259
3/4" Air Impact Wrench, 1050 ft-lb Torque, Friction Ring Retainer, Pistol
Description: The 259 Series impact wrench is great for jobs in vehicle repair and heavy truck markets. Backed by Ingersoll Rand's strong reputation of developing industry-leading tools, the 259 Series can be counted on for durable and consistent power at a great value.
Features And Benefits:
- LIGHT WEIGHT: With the 259 Series' aluminum hammer case and powerful vane motor, this impact wrench offers a great power-to-weight ratio.
- RELIABILITY: These parts will stand the test of time. The rocking dog impact mechanism is easy to maintain, and delivers a powerful burst with low air needs.
- ERGONOMIC: The aluminum hammer case and pistol grip make the 259 Series easy to hold, while the power regulator offers deeper control during use.
- Patent-pending soft-mount system reduces vibration for extended motor and switch life
- Handle-vented exhaust directs air away from the operator
- Silenced exhaust reduces tool noise while using this pneumatic impact wrench
- Feather-touch trigger provides maximum speed control
- Ergonomically designed small-handle grip helps reduce operator fatigue during extended use of this pneumatic air wrench
- Optimized for the vehicle repair industry and heavy trucks
- Non-biased motor delivers 1,050 ft-lb of maximum torque in both forward and reverse
- 1-year warranty
Product Application and Uses:
Vehicle Repair And Heavy Truck Markets
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 30
- Air Consumption @ Load (l/min): 850
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 8
- Average Air Consumption (l/min): 227
- Blows per Min: 1000
- Color: Silver
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: General Duty
- End Plates: Steel
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 96.5 / 107.5
- Hammer Case: Aluminum
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Rocking Dog
- Impacting Sound Pressure/Power Db(A): 91.6 / 102.6
- Max Bolt Diameter (in): 7/8
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1050
- Max Torque (in-lb): 12603
- Max Torque (nm): 1424
- Min Hose Size (in): 3/8
- Motor: Non-Biased
- Number of Power Settings: 2
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 119.3
- Product Length (in): 8.6
- Product Width (in): 3.2
- Product Height (in): 8.5
- Product Weight (lb): 8.8
- Recommended Forward Torque Range (ft-lb): 201-800
- Recommended Forward Torque Range (in-lb): 2407-9603
- Recommended Forward Torque Range (nm): 272-1085
- Retainer Type: Friction Ring
- Side to Center Distance (in): 1.6
- Side to Center Distance (mm): 41
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 6.4
- Warranty: 1-year
- Accessories: 259-BOOT
- Accessories: SK6H8N
- Accessories:
Plate, Front End
IR 259-11
Front End Plate for Ingersoll Rand 259 Series Impact Wrench
Gasket, Reverse Retainer
IR 259-223
Reverse Retainer Gasket Replacement Part for Ingersoll Rand 259 Series Impact Wrench
Lock Clip Qty 1
IR 24SR-207
Lock Clip for Ingersoll Rand W, A, D, MDT3-EU Series Chipping Hammer
Air Impact Wrench - 3/4
IR 261
3/4" Air Impact Wrench, Super Duty, 1100 ft-lb Torque, Friction Ring Retainer, Pistol
Description: The 261 Series impact wrench is ideal for vehicle repair and heavy truck and machinery jobs where you'll benefit from the square socket retaining ring and the power behind the vane motor. Trigger actuation and a power regulator let you complete projects with control and ease.
Features And Benefits:
- Power to Weight: Lightweight but still delivers high torque output capabilities, making it the best choice for spring work, pinion nut and track pad removal, and major engine teardowns.
- Power: The 6 vane motor provides a high torque output for increased power.
- Jumbo Hammer Mechanism: The patented jumbo hammer is unaffected by air pressure changes and delivers 1100 ft-lbs. of max torque and a working torque of 200-900 ft-lbs.
- Square Socket: The square socket retaining ring makes this an ideal impact wrench for projects where you need increased socket connection, like auto repair and heavy truck and machinery jobs.
- Lasting Performance: This power tool is equipped with a pressure-fed lube system which provides trouble-free, longer performance.
- Handle Exhaust: Handle exhaust directs dust and dirt from being blow at you while working as it directs air away from the operator.
Product Application and Uses:
Vehicle Repair And Heavy Truck Markets
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 38
- Air Consumption @ Load (l/min): 1076
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 9.5
- Average Air Consumption (l/min): 269
- Blows per Min: 1000
- Color: Silver
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Cast Iron
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 100.3 / 111.3
- Hammer Case: Steel
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Jumbo Hammer
- Impacting Sound Pressure/Power Db(A): 98.4 / 109.4
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 5500
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1100
- Max Torque (in-lb): 13196
- Max Torque (nm): 1491
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 96.7
- Product Length (in): 8.8
- Product Width (in): 4.7
- Product Height (in): 10.3
- Product Weight (lb): 12.4
- Recommended Forward Torque Range (ft-lb): 200-600
- Recommended Forward Torque Range (in-lb): 2399-7196
- Recommended Forward Torque Range (nm): 271-813
- Recommended Reverse Torque (ft-lb): 200-600
- Recommended Reverse Torque (nm): 271-813
- Retainer Type: Friction Ring
- Side to Center Distance (in): 2.4
- Side to Center Distance (mm): 61
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 10.4
- Warranty: 1-year
- Accessories: 261-BOOT
- Lubrication: 105-LBK1 <
3/4In Sq. Dr. Heavy Duty Impact w/ 3In Anvil, 1000 ft-Lb Max Torque
IR 261-3
3/4" Air Impact Wrench, 3" Ext Anvil, Super Duty, 1100 ft-lb Torque, Friction Ring Retainer, Pistol
Description: The 261 Series impact wrench is ideal for vehicle repair and heavy truck and machinery jobs where you'll benefit from the square socket retaining ring and the power behind the vane motor. Trigger actuation and a power regulator let you complete projects with control and ease.
Features And Benefits:
- Power: The 6 vane motor provides a high torque output for increased power.
- Jumbo Hammer Mechanism: The patented jumbo hammer is unaffected by air pressure changes and delivers 1100 ft-lbs. of max torque and a working torque of 200-900 ft-lbs.
- Lasting Performance: This power tool is equipped with a pressure-fed lube system which provides trouble-free, longer performance.
- Square Socket: The square socket retaining ring makes this an ideal impact wrench for projects where you need increased socket connection, like auto repair and heavy truck and machinery jobs.
- Handle Exhaust: Handle exhaust directs dust and dirt from being blow at you while working as it directs air away from the operator.
- Extended Reach: The 3-inch extended anvil provides you with increased reach that's invaluable when working with deeper fasteners.
Product Application and Uses:
Applications include tire changing, engine repair, engine component installation and removal, body work installation and removal, farm implement assembly and repair, auto repair and maintenance, and truck repair.
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 38
- Air Consumption @ Load (l/min): 1076
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: 3" Extended
- Average Air Consumption (cfm): 9.5
- Average Air Consumption (l/min): 269
- Blows per Min: 1000
- Color: Silver
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Cast Iron
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 100.3 / 111.3
- Hammer Case: Steel
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Jumbo Hammer
- Impacting Sound Pressure/Power Db(A): 98.4 / 109.4
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 5500
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1100
- Max Torque (in-lb): 13196
- Max Torque (nm): 1491
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 11.8
- Product Width (in): 3.76
- Product Height (in): 10.3
- Product Weight (lb): 13
- Recommended Forward Torque Range (ft-lb): 200-600
- Recommended Forward Torque Range (in-lb): 2399-7196
- Recommended Forward Torque Range (nm): 271-813
- Recommended Reverse Torque (ft-lb): 200-600
- Recommended Reverse Torque (nm): 271-813
- Retainer Type: Friction Ring
- Side to Center Distance (in): 1.88
- Side to Center Distance (mm): 48
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 10.4
- Warranty: 1-year
- Accessories: 261-BOOT
- Lubrication:
Tune-Up Kit
IR 244-TK2
Tune-Up kit for 244A Series Impact Wrench
- Includes: throttle valve face and spring, reverse valve bushing seal (2), reverse valve dentent ball and spring, front and rear rotor bearings, rear rotor bearing retainer, vane pack (6), hammer and end plate gaskets, socket retainer, retainer o-ring
- For Use With: 244A
- For Use With: 244A-2
O-Ring (2920-283)
IR 261-283
Reverse Valve Seal for Ingersoll Rand 261, 271 Series Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 261 and 271 Series Impact Wrench
- Includes: (2) Seals
- For Use With: 261
- For Use With: 261-3
- For Use With: 261-6
- For Use With: 271
Impactool (2705A1)
IR 2705P1
1/2" Air Impact Wrench, Heavy Duty, 600 ft-lb Torque, Pin Retainer, Pistol
Description: The 2700 Series impact wrench is built strong with a twin hammer impact mechanism, smooth trigger actuation and an easy-to-hold pistol grip. This wrench's vane motor delivers high torque output, while the power regulator allows for increased control.
Features And Benefits:
- Durability: Steel hammer case and metal housing increases the ability to withstand drops or harsh conditions.
- Power and Performance: Finely tuned twin hammer impact mechanism and power regulator
Product Application and Uses:
Heavy Industry, Oil&Gas, Foundry
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 4.2
- Air Consumption @ Load (l/min): 119
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 1200
- Color: Silver
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 1/2
- Drive Type: Square
- Duty Rating: Heavy Duty
- End Plates: Steel
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 99.0 / 110.0
- Hammer Case: Steel
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Max Bolt Diameter (in): 9/16
- Max Free Speed (rpm): 8500
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 600
- Max Torque (in-lb): 7196
- Max Torque (nm): 813
- Min Hose Size (in): 3/8
- Motor: Non-Biased
- Number of Power Settings: 6
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 106.5
- Product Length (in): 7.3
- Product Width (in): 2.81
- Product Height (in): 7.7
- Product Weight (lb): 5.63
- Recommended Forward Torque Range (ft-lb): 40-200
- Recommended Forward Torque Range (in-lb): 478-2399
- Recommended Forward Torque Range (nm): 54-271
- Retainer Type: Pin Detent
- Side to Center Distance (in): 1.4
- Side to Center Distance (mm): 36
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 6.5
- Warranty: 1-year
- Accessories: S64H1316L-PS1
- Accessories: S64H1516L-PS1
- Accessories: S64H34L-PS1
- Accessories: S64H78L-PS1
- Accessories: S64M17L-PS1
- Accessories: S64M18L-PS1
- Accessories: S64M21L-PS1
- Accessories: S64M22L-PS1
- Accessories: S64M24L-PS1
- Accessories: S64M26L-PS1
- Accessories: SK4H13N
- Accessories: SK4M14LN
- Lubrication: 105-LBK1
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2705-TK3
- Parts: 402-302
- Parts: 402-303
- Parts: 404-50A
- Parts: 405-159
- Parts: 705-93
Tune-Up Kit
IR 261-TK2
Tune-up Kit for Ingersoll Rand 261 Series Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 261 3/4" air impact wrench.
- Includes: Throttle Valve, Throttle Valve Seat, Throttle Valve Spring, Housing Plate Gasket, (2) Reverse Valve Seals, Rotor Bearing Retainer, Rear Rotor Bearing, Front Rotor BearingRear End Plate Gasket, (6-pc) Vane Packet, Hammer Case Gasket, Socket Retainer, Socket Retainer O-ring.
- For Use With: 261
- For Use With: 261-3
- For Use With: 261-6
- For Use With: 271
Payment options
