INGERSOLL-RAND IR TOOL S12880

INGERSOLL-RAND IR TOOL S12880 branded products
View as Grid List
Sort by
Picture of ROTOR SPLINE ADAPTER

ROTOR SPLINE ADAPTER

IR OM83-07

IR OM83-07

ROTOR SPLINE ADAPTER
$218.00
Picture of HOOK INSULATED

HOOK INSULATED

IR OPTRI

IR OPTRI

HOOK INSULATED
$135.00
Picture of ISI NORGREN VACUUM 2.75X 5.50 OVAL

ISI NORGREN VACUUM 2.75X 5.50 OVAL

IR OVC-25

IR OVC-25

ISI NORGREN VACUUM 2.75X 5.50 OVAL
$220.00
Picture of 1/4" POLY COIL HOSE

1/4" POLY COIL HOSE

IR P14-10

IR P14-10

1/4" x 10 Poly Coil Hose, (1) 1/4" rigid, (1) 1/4" Swivel Fitting

$52.00
Picture of 1/4" PLY COIL HOSE

1/4" PLY COIL HOSE

IR P14-30

IR P14-30

1/4" x 30 Poly Coil Hose, (1) 1/4" rigid, (1) 1/4" Swivel Fitting

$89.00
Picture of FLANGE NUT, M14 X 2 TH'D

FLANGE NUT, M14 X 2 TH'D

IR MG1-338M

IR MG1-338M

FLANGE NUT, M14 X 2 TH'D
$15.00
Picture of ARBOR, M14

ARBOR, M14

IR MG1-4M

IR MG1-4M

ARBOR, M14
$66.00
Picture of WARNING LABEL

WARNING LABEL

IR MG1-99

IR MG1-99

WARNING LABEL
$15.00
Picture of GUARD WARNING LABEL

GUARD WARNING LABEL

IR MG1-99G

IR MG1-99G

GUARD WARNING LABEL
$15.00
Picture of EXHAUST ADAPTER, PIPED AWAY ASSEMBLY

EXHAUST ADAPTER, PIPED AWAY ASSEMBLY

IR MG1-K284

IR MG1-K284

EXHAUST ADAPTER, PIPED AWAY ASSEMBLY
$20.00
Picture of SMC GUIDED CYLINDER 25MMBORE X 50MM STROKE

SMC GUIDED CYLINDER 25MMBORE X 50MM STROKE

IR MGQL25-50-XC18

IR MGQL25-50-XC18

SMC GUIDED CYLINDER 25MMBORE X 50MM STROKE
$925.00
Picture of MHD56147 : FORM EC DEC. OF CONFORM

MHD56147 : FORM EC DEC. OF CONFORM

IR MHD56147

IR MHD56147

MHD56147 : FORM EC DEC. OF CONFORM
$15.00
Picture of MHD56197 : FORM, MHLK-HSK

MHD56197 : FORM, MHLK-HSK

IR MHD56197

IR MHD56197

MHD56197 : FORM, MHLK-HSK
$15.00
Picture of MANIFOLD

MANIFOLD

IR MHLK-342

IR MHLK-342

MANIFOLD
$330.00
Picture of GASKET, NON-RETURNABLE PART

GASKET, NON-RETURNABLE PART

IR MHLK-343

IR MHLK-343

GASKET, NON-RETURNABLE PART
$29.00
Picture of EXHAUST

EXHAUST

IR MHLK-KEXH

IR MHLK-KEXH

EXHAUST
$385.00
Picture of LABEL, MADE IN INDIA

LABEL, MADE IN INDIA

IR MII-30X4B

IR MII-30X4B

LABEL, MADE IN INDIA
$11.20
Picture of FLUIDLINE MALE TO FEMALE ELBOW 10-32

FLUIDLINE MALE TO FEMALE ELBOW 10-32

IR ML-10

IR ML-10

FLUIDLINE MALE TO FEMALE ELBOW 10-32
$19.00
Picture of Hoist, 1 Ton, Pendent Control, Snap Hook, 20ft Lift and Drop, Fabric Chain Container

Hoist, 1 Ton, Pendent Control, Snap Hook, 20ft Lift and Drop, Fabric Chain Container

IR ML1000K-2C20-C20U

IR ML1000K-2C20-C20

Hoist, 1 Ton, Pendent Control, Snap Hook, 20ft Lift and Drop, Fabric Chain Container
Call for pricing
Picture of NUT, NON-RETURNABLE PART

NUT, NON-RETURNABLE PART

IR ML1000K-305-E

IR ML1000K-305-E

NUT, NON-RETURNABLE PART
$197.00
1/2" DXS2 SOCKET

1/2" DXS2 SOCKET

IR DXS2SH12

IR DXS2SH12

DXS2 1/2" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.85
Product Width (in): 0.85
Product Height (in): 1.57
Product Weight (lb): 0.17
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1/2in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH12L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$15.00
13/16" DXS2 SOCKET

13/16" DXS2 SOCKET

IR DXS2SH1316

IR DXS2SH1316

DXS2 13/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 1.57
Product Weight (lb): 0.25
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 13/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1316L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$19.00
1-3/16" DXS2 SOCKET

1-3/16" DXS2 SOCKET

IR DXS2SH1-316

IR DXS2SH1-316

DXS2 1-3/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.15
Product Weight (lb): 0.46
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 1-3/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1-316L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$21.00
13/16" DEEP DXS2 SOCKET

13/16" DEEP DXS2 SOCKET

IR DXS2SH1316L

IR DXS2SH1316L

DXS2 13/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 2.95
Product Weight (lb): 0.56
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 13/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1316
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$19.00
1-3/16" DEEP DXS2 SOCKET

1-3/16" DEEP DXS2 SOCKET

IR DXS2SH1-316L

IR DXS2SH1-316L

DXS2 1-3/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.95
Product Weight (lb): 0.82
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1-3/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1-316
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$21.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 13/16 IN

DXS2 LUG NUT IMPACT SOCKET, 13/16 IN

IR DXS2SH1316LN

IR DXS2SH1316LN

DXS2 LUG NUT IMPACT SOCKET, 13/16 IN
$48.00
15/16" DXS2 SOCKET

15/16" DXS2 SOCKET

IR DXS2SH1516

IR DXS2SH1516

DXS2 15/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.25
Product Width (in): 1.25
Product Height (in): 1.57
Product Weight (lb): 0.29
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 15/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1516L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$19.00
1" DEEP DXS2 SOCKET

1" DEEP DXS2 SOCKET

IR DXS2SH1L

IR DXS2SH1L

DXS2 1" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.38
Product Width (in): 1.38
Product Height (in): 2.95
Product Weight (lb): 0.68
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 1in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH1
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$21.00
3/4" DXS2 SOCKET

3/4" DXS2 SOCKET

IR DXS2SH34

IR DXS2SH34

DXS2 3/4" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.08
Product Width (in): 1.08
Product Height (in): 1.57
Product Weight (lb): 0.24
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 3/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH34L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$19.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 3/4 IN

DXS2 HEX BIT IMPACT SOCKET, 3/4 IN

IR DXS2SH34HB

IR DXS2SH34HB

DXS2 HEX BIT IMPACT SOCKET, 3/4 IN
$34.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 3/8 IN

DXS2 HEX BIT IMPACT SOCKET, 3/8 IN

IR DXS2SH38HB

IR DXS2SH38HB

DXS2 HEX BIT IMPACT SOCKET, 3/8 IN
$34.00
5/8" DXS2 SOCKET

5/8" DXS2 SOCKET

IR DXS2SH58

IR DXS2SH58

DXS2 5/8" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 1.57
Product Weight (lb): 0.19
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 5/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH58L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 5/8 IN

DXS2 HEX BIT IMPACT SOCKET, 5/8 IN

IR DXS2SH58HB

IR DXS2SH58HB

DXS2 HEX BIT IMPACT SOCKET, 5/8 IN
$34.00
5/8" DEEP DXS2 SOCKET

5/8" DEEP DXS2 SOCKET

IR DXS2SH58L

IR DXS2SH58L

DXS2 5/8" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 2.95
Product Weight (lb): 0.41
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 5/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH58
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$19.00
7/16" DXS2 SOCKET

7/16" DXS2 SOCKET

IR DXS2SH716

IR DXS2SH716

DXS2 7/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 1.57
Product Weight (lb): 0.16
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 7/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH716L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 7/16 IN

DXS2 HEX BIT IMPACT SOCKET, 7/16 IN

IR DXS2SH716HB

IR DXS2SH716HB

DXS2 HEX BIT IMPACT SOCKET, 7/16 IN
$34.00
7/16" DEEP DXS2 SOCKET

7/16" DEEP DXS2 SOCKET

IR DXS2SH716L

IR DXS2SH716L

DXS2 7/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 2.95
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 7/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH716
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$19.00
7/8" DXS2 SOCKET

7/8" DXS2 SOCKET

IR DXS2SH78

IR DXS2SH78

DXS2 7/8" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.22
Product Width (in): 1.22
Product Height (in): 1.57
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 7/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH78L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$19.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 7/8 IN

DXS2 HEX BIT IMPACT SOCKET, 7/8 IN

IR DXS2SH78HB

IR DXS2SH78HB

DXS2 HEX BIT IMPACT SOCKET, 7/8 IN
$34.00
7/8" DEEP DXS2 SOCKET

7/8" DEEP DXS2 SOCKET

IR DXS2SH78L

IR DXS2SH78L

DXS2 7/8" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.22
Product Width (in): 1.22
Product Height (in): 2.95
Product Weight (lb): 0.59
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 7/8in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH78
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$21.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 7/8 IN

DXS2 LUG NUT IMPACT SOCKET, 7/8 IN

IR DXS2SH78LN

IR DXS2SH78LN

DXS2 LUG NUT IMPACT SOCKET, 7/8 IN
$48.00
9/16" DXS2 SOCKET

9/16" DXS2 SOCKET

IR DXS2SH916

IR DXS2SH916

DXS2 9/16" SAE Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.93
Product Width (in): 0.93
Product Height (in): 1.57
Product Weight (lb): 0.19
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 9/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH916L
  • DXSK2H14
  • DXSK2H14L
  • DXSK2M15
  • DXSK2M15L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 9/16 IN

DXS2 HEX BIT IMPACT SOCKET, 9/16 IN

IR DXS2SH916HB

IR DXS2SH916HB

DXS2 HEX BIT IMPACT SOCKET, 9/16 IN
$34.00
9/16" DEEP DXS2 SOCKET

9/16" DEEP DXS2 SOCKET

IR DXS2SH916L

IR DXS2SH916L

DXS2 9/16" SAE Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.93
Product Width (in): 0.93
Product Height (in): 2.95
Product Weight (lb): 0.36
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 9/16in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SH916
  • DXSK2H14L
  • DXSK2H14
  • DXSK2M15
  • DXSK2M15L
$19.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 10MM

DXS2 HEX BIT IMPACT SOCKET, 10MM

IR DXS2SM10HB

IR DXS2SM10HB

DXS2 HEX BIT IMPACT SOCKET, 10MM
$34.00
12 MM DXS2 SOCKET

12 MM DXS2 SOCKET

IR DXS2SM12

IR DXS2SM12

DXS2 12mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.74
Product Width (in): 0.74
Product Height (in): 1.57
Product Weight (lb): 0.16
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 12mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM12L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 12MM

DXS2 HEX BIT IMPACT SOCKET, 12MM

IR DXS2SM12HB

IR DXS2SM12HB

DXS2 HEX BIT IMPACT SOCKET, 12MM
$34.00
13 MM DEEP DXS2 SOCKET

13 MM DEEP DXS2 SOCKET

IR DXS2SM13L

IR DXS2SM13L

DXS2 13mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 2.95
Product Weight (lb): 0.32
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 13mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM13
  • DXSK2M15L
  • DXSK2M15
  • DXSK2H14
  • DXSK2H14L
$19.00
13 MM DXS2 SOCKET

13 MM DXS2 SOCKET

IR DXS2SM13

IR DXS2SM13

DXS2 13mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.8
Product Width (in): 0.8
Product Height (in): 1.57
Product Weight (lb): 0.17
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 13mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM13L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
12 MM DEEP DXS2 SOCKET

12 MM DEEP DXS2 SOCKET

IR DXS2SM12L

IR DXS2SM12L

DXS2 12mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.74
Product Width (in): 0.74
Product Height (in): 2.95
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 12mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM12
  • DXSK2M15L
  • DXSK2M15
  • DXSK2H14
  • DXSK2H14L
$19.00
14 MM DXS2 SOCKET

14 MM DXS2 SOCKET

IR DXS2SM14

IR DXS2SM14

DXS2 14mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.85
Product Width (in): 0.85
Product Height (in): 1.57
Product Weight (lb): 0.18
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 14mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM14L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 14MM

DXS2 HEX BIT IMPACT SOCKET, 14MM

IR DXS2SM14HB

IR DXS2SM14HB

DXS2 HEX BIT IMPACT SOCKET, 14MM
$34.00
14 MM DEEP DXS2 SOCKET

14 MM DEEP DXS2 SOCKET

IR DXS2SM14L

IR DXS2SM14L

DXS2 14mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.85
Product Width (in): 0.85
Product Height (in): 2.95
Product Weight (lb): 0.33
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 14mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM14
  • DXSK2M15L
  • DXSK2M15
  • DXSK2H14
  • DXSK2H14L
$19.00
15 MM DXS2 SOCKET

15 MM DXS2 SOCKET

IR DXS2SM15

IR DXS2SM15

DXS2 15mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.93
Product Width (in): 0.93
Product Height (in): 1.57
Product Weight (lb): 0.19
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 15mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM15L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 15MM

DXS2 HEX BIT IMPACT SOCKET, 15MM

IR DXS2SM15HB

IR DXS2SM15HB

DXS2 HEX BIT IMPACT SOCKET, 15MM
$34.00
16 MM DXS2 SOCKET

16 MM DXS2 SOCKET

IR DXS2SM16

IR DXS2SM16

DXS2 16mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 1.57
Product Weight (lb): 0.2
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 16mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM16L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
15 MM DEEP DXS2 SOCKET

15 MM DEEP DXS2 SOCKET

IR DXS2SM15L

IR DXS2SM15L

DXS2 15mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.93
Product Width (in): 0.93
Product Height (in): 2.95
Product Weight (lb): 0.4
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 15mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
16 MM DEEP DXS2 SOCKET

16 MM DEEP DXS2 SOCKET

IR DXS2SM16L

IR DXS2SM16L

DXS2 16mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 0.98
Product Width (in): 0.98
Product Height (in): 2.95
Product Weight (lb): 0.41
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 16mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
17 MM DXS2 SOCKET

17 MM DXS2 SOCKET

IR DXS2SM17

IR DXS2SM17

DXS2 17mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.01
Product Width (in): 1.01
Product Height (in): 1.57
Product Weight (lb): 0.2
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 17mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM17L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 17MM

DXS2 HEX BIT IMPACT SOCKET, 17MM

IR DXS2SM17HB

IR DXS2SM17HB

DXS2 HEX BIT IMPACT SOCKET, 17MM
$34.00
17 MM DEEP DXS2 SOCKET

17 MM DEEP DXS2 SOCKET

IR DXS2SM17L

IR DXS2SM17L

DXS2 17mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.01
Product Width (in): 1.01
Product Height (in): 2.95
Product Weight (lb): 0.42
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 17mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 17 MM

DXS2 LUG NUT IMPACT SOCKET, 17 MM

IR DXS2SM17LN

IR DXS2SM17LN

DXS2 LUG NUT IMPACT SOCKET, 17 MM
$48.00
18 MM DXS2 SOCKET

18 MM DXS2 SOCKET

IR DXS2SM18

IR DXS2SM18

DXS2 18mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.08
Product Width (in): 1.08
Product Height (in): 1.57
Product Weight (lb): 0.21
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 18mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM18L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$15.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 18MM

DXS2 HEX BIT IMPACT SOCKET, 18MM

IR DXS2SM18HB

IR DXS2SM18HB

DXS2 HEX BIT IMPACT SOCKET, 18MM
$34.00
18MM Deep DXS2 Socket

18MM Deep DXS2 Socket

IR DXS2SM18L

IR DXS2SM18L

DXS2 18mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.08
Product Width (in): 1.08
Product Height (in): 2.95
Product Weight (lb): 0.45
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 18mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
19 MM DXS2 SOCKET

19 MM DXS2 SOCKET

IR DXS2SM19

IR DXS2SM19

DXS2 19mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 1.57
Product Weight (lb): 0.24
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 19mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM19L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$19.00
19 MM DEEP DXS2 SOCKET

19 MM DEEP DXS2 SOCKET

IR DXS2SM19L

IR DXS2SM19L

DXS2 19mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.13
Product Width (in): 1.13
Product Height (in): 2.95
Product Weight (lb): 0.53
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 19mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 19MM

DXS2 HEX BIT IMPACT SOCKET, 19MM

IR DXS2SM19HB

IR DXS2SM19HB

DXS2 HEX BIT IMPACT SOCKET, 19MM
$34.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 19 MM

DXS2 LUG NUT IMPACT SOCKET, 19 MM

IR DXS2SM19LN

IR DXS2SM19LN

DXS2 LUG NUT IMPACT SOCKET, 19 MM
$48.00
21 MM DEEP DXS2 SOCKET

21 MM DEEP DXS2 SOCKET

IR DXS2SM21L

IR DXS2SM21L

DXS2 21mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.22
Product Width (in): 1.22
Product Height (in): 2.95
Product Weight (lb): 0.56
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 21mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$19.00
22 MM DXS2 SOCKET

22 MM DXS2 SOCKET

IR DXS2SM22

IR DXS2SM22

DXS2 22mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.25
Product Width (in): 1.25
Product Height (in): 1.57
Product Weight (lb): 0.28
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 22mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM22L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$19.00
Picture of DXS2 HEX BIT IMPACT SOCKET, 22MM

DXS2 HEX BIT IMPACT SOCKET, 22MM

IR DXS2SM22HB

IR DXS2SM22HB

DXS2 HEX BIT IMPACT SOCKET, 22MM
$34.00
21 MM DXS2 SOCKET

21 MM DXS2 SOCKET

IR DXS2SM21

IR DXS2SM21

DXS2 21mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.22
Product Width (in): 1.22
Product Height (in): 1.57
Product Weight (lb): 0.25
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 21mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM21L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$19.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 21 MM

DXS2 LUG NUT IMPACT SOCKET, 21 MM

IR DXS2SM21LN

IR DXS2SM21LN

DXS2 LUG NUT IMPACT SOCKET, 21 MM
$48.00
22 MM DEEP DXS2 SOCKET

22 MM DEEP DXS2 SOCKET

IR DXS2SM22L

IR DXS2SM22L

DXS2 22mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.25
Product Width (in): 1.25
Product Height (in): 2.95
Product Weight (lb): 0.6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 22mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
24 MM DXS2 SOCKET

24 MM DXS2 SOCKET

IR DXS2SM24

IR DXS2SM24

DXS2 24mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.38
Product Width (in): 1.38
Product Height (in): 1.57
Product Weight (lb): 0.31
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 24mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM24L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$19.00
Picture of DXS2 LUG NUT IMPACT SOCKET, 22 MM

DXS2 LUG NUT IMPACT SOCKET, 22 MM

IR DXS2SM22LN

IR DXS2SM22LN

DXS2 LUG NUT IMPACT SOCKET, 22 MM
$48.00
24 MM DEEP DXS2 SOCKET

24 MM DEEP DXS2 SOCKET

IR DXS2SM24L

IR DXS2SM24L

DXS2 24mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.38
Product Width (in): 1.38
Product Height (in): 2.95
Product Weight (lb): 0.69
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 24mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
27 MM DXS2 SOCKET

27 MM DXS2 SOCKET

IR DXS2SM27

IR DXS2SM27

DXS2 27mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.52
Product Width (in): 1.52
Product Height (in): 1.9
Product Weight (lb): 0.38
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 27mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM27L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$21.00
27 MM DEEP DXS2 SOCKET

27 MM DEEP DXS2 SOCKET

IR DXS2SM27L

IR DXS2SM27L

DXS2 27mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.52
Product Width (in): 1.52
Product Height (in): 2.95
Product Weight (lb): 0.78
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 27mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
30 MM DXS2 SOCKET

30 MM DXS2 SOCKET

IR DXS2SM30

IR DXS2SM30

DXS2 30mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.64
Product Width (in): 1.64
Product Height (in): 2.02
Product Weight (lb): 0.46
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 30mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM30L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$21.00
30 MM DEEP DXS2 SOCKET

30 MM DEEP DXS2 SOCKET

IR DXS2SM30L

IR DXS2SM30L

DXS2 30mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.64
Product Width (in): 1.64
Product Height (in): 2.95
Product Weight (lb): 0.82
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 30mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
32 MM DXS2 SOCKET

32 MM DXS2 SOCKET

IR DXS2SM32

IR DXS2SM32

DXS2 32mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.15
Product Weight (lb): 0.52
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 32mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM32L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$21.00
32 MM DEEP DXS2 SOCKET

32 MM DEEP DXS2 SOCKET

IR DXS2SM32L

IR DXS2SM32L

DXS2 32mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.72
Product Width (in): 1.72
Product Height (in): 2.95
Product Weight (lb): 0.87
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 32mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
33 MM DXS2 SOCKET

33 MM DXS2 SOCKET

IR DXS2SM33

IR DXS2SM33

DXS2 33mm Metric Standard Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.8
Product Width (in): 1.8
Product Height (in): 2.22
Product Weight (lb): 0.57
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: Metric
Socket Size: 33mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL


Similar IR
  • DXS2SM33L
  • DXSK2M15
  • DXSK2M15L
  • DXSK2H14
  • DXSK2H14L
$21.00
33 MM DEEP DXS2 SOCKET

33 MM DEEP DXS2 SOCKET

IR DXS2SM33L

IR DXS2SM33L

DXS2 33mm Metric Deep Impact Socket

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits
  • DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
  • Up to 20% longer life compared to traditional square driven sockets.
  • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
  • Ball nose retention pin for quick, tool-free installation and removal.
  • High visibility laser etched markings to easily identify the size you need.
  • Relieved 6 point Hex corners help reduce faster rounding.
  • Square retention pin conversion kit available for secure connection.
  • Complies with ASME B107.110
  • Backed by a lifetime limited warranty for peace of mind with proven reliability.
  • For use with all Ingersoll Rand DXS2 drive Impacts.


Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 1.8
Product Width (in): 1.8
Product Height (in): 2.95
Product Weight (lb): 0.93
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: Metric
Socket Size: 33mm
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited
Fastener Holding Magnet: No

For Use With
  • 2236QPTIMAX
  • 2236QTIMAX
  • 2236QTIMAX-2
  • 2236QTIMAX-G
  • 2236QTIMAX-O
  • 2236QTIMAX-R
  • W7153
  • W7153-AP
  • W7153-K22
  • W7153-K22-CN
  • W7153-K22-IN
  • W7153-K22-JP
  • W7153-K22-KR
  • W7153-K22-SGHK
  • W7153-K22B-AN
  • W7153-K22B-EU
  • W7253-TL
$21.00
Picture of FS 275LB CAP 8FT BRIDGE 10FT RUNWAY 10FT UC 4 CO

FS 275LB CAP 8FT BRIDGE 10FT RUNWAY 10FT UC 4 CO

IR E027508010-10

IR E027508010-10

FS 275LB CAP 8FT BRIDGE 10FT RUNWAY 10FT UC 4 CO
$10,450.00
Picture of DXS TOOL

DXS TOOL

IR DXS-TOOL

IR DXS-TOOL

DXS TOOL
$8.00
Picture of FS 275LB CAP.10FT BRIDGE 10FT RUNWAY 10FT UC E027510010-10

FS 275LB CAP.10FT BRIDGE 10FT RUNWAY 10FT UC E027510010-10

IR E027510010-10

IR E027510010-10

FS 275LB CAP.10FT BRIDGE 10FT RUNWAY 10FT UC E027510010-10
$9,550.00
Picture of FS 275LB CAP.10FT BRIDGE 20FT RUNWAY 12FT UC

FS 275LB CAP.10FT BRIDGE 20FT RUNWAY 12FT UC

IR E027510020-12

IR E027510020-12

FS 275LB CAP.10FT BRIDGE 20FT RUNWAY 12FT UC
$16,950.00
Picture of FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 12FT

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 12FT

IR E027515010-12

IR E027515010-12

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 12FT
$14,850.00
Picture of FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 10FT

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 10FT

IR E027515010-10

IR E027515010-10

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 10FT
$14,400.00
Picture of FS 275LB CAP.15FT BRIDGE 15FT RUNWAY 10FT UC

FS 275LB CAP.15FT BRIDGE 15FT RUNWAY 10FT UC

IR E027515015-10

IR E027515015-10

FS 275LB CAP.15FT BRIDGE 15FT RUNWAY 10FT UC
$10,600.00
Picture of FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 14FT

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 14FT

IR E027515010-14

IR E027515010-14

FS 275LB CAP. 15FTBRIDGE 10FT RUNWAY 14FT
$14,850.00
Picture of FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 12FT

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 12FT

IR E027515020-12

IR E027515020-12

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 12FT
$17,800.00
Picture of FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 10FT

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 10FT

IR E027515020-10

IR E027515020-10

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 10FT
$15,700.00
Picture of FS 275LB CAP.15FT BRIDGE 30FT RUNWAY 10FT UC

FS 275LB CAP.15FT BRIDGE 30FT RUNWAY 10FT UC

IR E027515030-10

IR E027515030-10

FS 275LB CAP.15FT BRIDGE 30FT RUNWAY 10FT UC
$21,950.00
Picture of FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 14FT

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 14FT

IR E027515020-14

IR E027515020-14

FS 275LB CAP. 15FTBRIDGE 20FT RUNWAY 14FT
$16,100.00
Picture of PISTON SEAL

PISTON SEAL

IR HDL1-31

IR HDL1-31

PISTON SEAL
$15.00
Picture of PISTON SPRING

PISTON SPRING

IR HDL1-23

IR HDL1-23

PISTON SPRING
$15.00