INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
PAVING BREAKER 1 1/8 X 6
IR MX90A
IR MX90A
Pavement Breaker, 1-1/8 X 6" Hex Shank, 5.75" Stroke Length, 2.62" Bore
The most versatile of our available pavement breakers, the MX90 models are great for anything from heavy asphalt removal to industrial maintenance to heavy demolition. The directional exhaust prevents blowback, and with one of the fewest parts in the industry, the MX Series is easier and less complex to service.Features And Benefits
- Variable Exhaust Deflector: The MX Series has an exhaust deflector that will rotate 360 degrees, allowing you to choose the direction of exhaust air.
- Durability: As our most versatile pavement breakers, the MX Series can easily withstand the needs of any job. From handling harsh environments to repeated drops, the MX Series won’t let you down. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.
- Power: The MX90 pavement breakers deliver large blow energy thanks to our Power-Strok™ piston technology.
- 1-year warranty.
Product Application and Uses: Heavy asphalt removal, industrial maintenance, heavy demolition.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 85
Air Consumption @ Load (l/min): 2407
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.62
Bushing: Spring Loaded Anvil
Collar Type: Round
Color: Beige
Configuration/Handle Type: T-handle
Duty Rating: Industrial Duty
Exhaust Location: Side - Adjustable
Housing Material: Steel
Inline Oilers: Yes
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Muffler: Yes
Power Source: Air Powered
Product Length (in): 27.5
Product Weight (lb): 87
Retainer Type: Latch
Shank SIze (in): 1-1/8 X 6
Shank Type: Hex
Steels: Yes
Stroke Length (in): 5.75
Warranty: 1-year
Similar IR
- MX90AF
$1,493.40
PAVING BREAKER 1 1/8 X 6
IR MX60A
IR MX60A
Pavement Breaker 1-1/8 x 6" Hex Shank, 5-3/4" Stroke Length, 1250 BPM, 2.06" Bore
The most versatile of our available pavement breakers, the MX60 is great for anything from heavy asphalt removal to industrial maintenance to heavy demolition. The directional exhaust prevents blowback, and you can choose between a standard or "flex handle" to add to vibration reduction. With one of the fewest parts in the industry, the MX Series is easier and less complex to service.Features And Benefits
- Variable Exhaust Deflector: The MX Series has an exhaust deflector that will rotate 360 degrees, allowing you to choose the direction of exhaust air.
- Durability: As our most versatile pavement breakers, the MX Series can easily withstand the needs of any job. From handling harsh environments to repeated drops, the MX Series won’t let you down. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.
- Power: The MX60 delivers large blow energy at 1250 BPM thanks to our Power-Strok™ piston technology.
Product Application and Uses: Mx60 And Mx90 Models Are Great For Anything From Heavy Asphalt Removal To Industrial Maintenance To Heavy Demolition
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 70
Air Consumption @ Load (l/min): 1982
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.06
Collar Type: Round
Color: Beige
Configuration/Handle Type: T-handle
Duty Rating: Industrial Duty
Height Over Spindle (in): 27.5
Housing Material: Steel
Inline Oilers: Yes
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Muffler: Optional
Power Source: Air Powered
Product Length (in): 27.5
Product Width (in): 7.4
Product Weight (lb): 76
Retainer Type: Latch
Shank SIze (in): 1-1/8 X 6
Shank Type: Hex
Standards/Certifications: Standards
Steels: Yes
Stroke Length (in): 5.75
Warranty: 1-year
Similar IR
- MX60AF
- MX60BF
- MX60B
$1,356.60
PAVING BREAKER 1 1/4 X 6
IR MX90B
IR MX90B
Pavement Breaker, 1-1/4 X 6" Hex Shank, 5.75" Stroke Length, 2.62" Bore
The most versatile of our available pavement breakers, the MX90 models are great for anything from heavy asphalt removal to industrial maintenance to heavy demolition. The directional exhaust prevents blowback, and with one of the fewest parts in the industry, the MX Series is easier and less complex to service.Features And Benefits
- Variable Exhaust Deflector: The MX Series has an exhaust deflector that will rotate 360 degrees, allowing you to choose the direction of exhaust air.
- Durability: As our most versatile pavement breakers, the MX Series can easily withstand the needs of any job. From handling harsh environments to repeated drops, the MX Series won’t let you down. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.
- Power: The MX90 pavement breakers deliver large blow energy thanks to our Power-Strok™ piston technology.
- 1-year warranty.
Product Application and Uses: Heavy asphalt removal, industrial maintenance, heavy demolition.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 85
Air Consumption @ Load (l/min): 2407
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.62
Bushing: Spring Loaded Anvil
Collar Type: Round
Color: Beige
Configuration/Handle Type: T-handle
Duty Rating: Industrial Duty
Exhaust Location: Side - Adjustable
Housing Material: Steel
Inline Oilers: Yes
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Muffler: Yes
Power Source: Air Powered
Product Length (in): 27.5
Product Weight (lb): 87
Retainer Type: Latch
Shank SIze (in): 1-1/4 X 6
Shank Type: Hex
Steels: Yes
Stroke Length (in): 5.75
Warranty: 1-year
Similar IR
- MX90A
$1,493.40
MOTOR
IR MVA017B
IR MVA017B
Direct Drive Air Motor, 5/8" Keyed Shaft, 5450 RPM, 1.93 HP, 9.5 NM, Reversible
Air Consumption at Max HP (scfm): 76Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Drive Size (in): 5/8
Drive Type: Round Keyed
Exhaust Location: Side
Finish: Paint
Gear Ratio: 1:1
Gear Reduction: Direct Drive
Gear Train: Gearless
Housing Material: Steel
Max Free Speed (rpm): 5450
Max Pressure (bar): 6.2
Max Torque (ft-lb): 7.0
Max Torque (in-lb): 84
Max Torque (nm): 9.5
Motor: Rotary Vane
Motor: Direct Drive
Mounting Type: Flanged Mounting
Number of Mounting Holes: 4
Power Source: Air Powered
Product Weight (lb): 12.5
Rated Power (hp): 1.93
Rated Power (kW): 1.44
Reversible: Reversible
Speed at Max Power (rpm): 2800
Starting Torque (ft-lb): 4.5
Starting Torque (nm): 6.1
Warranty: 1-year
$1,104.90
7in Needle Set-Steel 19/Pk
IR NS11-122-19
IR NS11-122-19
7" Steel Needle Set, 1/8" Diameter for Ingersoll Rand Needle Scaler, QTY 19
Needle Length: 7"Needle Qty: 19
Product Length (in): 7
Product Width (in): 3.5
Product Height (in): 29.5
For Use With
- 170PG
- 172LNA1
- 172LNA1-EU
- 182K1
- 182LNA1
Similar IR
- NS11-22-19
$42.00
SPIKE DRIVER
IR MX90-SD
IR MX90-SD
Spike Driver, 5.75" Stroke, 1250 BPM, 2.62" Bore
The MX90 Series spike drivers deliver more blow energy to each spike than you’ll find anywhere else thanks to our Power-Strok™ piston technology. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.Features And Benefits
- Powerful: The MX Series spike drivers are powerful, but still easy to handle.
- Variable Exhaust Deflector: Choose where you want the exhaust air to flow with the MX Series’ 360-degree directional exhaust capabilities.
- Durable: The Ingersoll Rand MX Series spike drivers are rugged enough to tackle any job you throw their way.
Product Application and Uses: The spike driver is designed for driving cut spikes in the construction of new track and the relaying of old track with new rails.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 85
Air Consumption @ Load (l/min): 2407
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.62
Color: Beige
Configuration/Handle Type: T-handle
Exhaust Location: Side - Adjustable
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Power Source: Air Powered
Product Length (in): 27.5
Product Weight (lb): 86
Stroke Length (in): 5.75
Warranty: 1-year
$1,727.10
PAVING BREAKER 1 1/4 X 6
IR MX60BF
IR MX60BF
Pavement Breaker, 1-1/4 X 6" Hex Shank, 5.75" Stroke Length, 2.06" Bore
The most versatile of our available pavement breakers, the MX60 models are great for anything from heavy asphalt removal to industrial maintenance to heavy demolition. The directional exhaust prevents blowback, and the "flex handle" will reduce vibration. With one of the fewest parts in the industry, the MX Series is easier and less complex to service.Features And Benefits
- Vibration-Reduced Flex Handle: The optional vibration-reduced flex handle of the MX Series provides vibration dampening in full 360-degree range of movement.
- Variable Exhaust Deflector: The MX Series has an exhaust deflector that will rotate 360 degrees, allowing you to choose the direction of exhaust air.
- Durability: As our most versatile pavement breakers, the MX Series can easily withstand the needs of any job. From handling harsh environments to repeated drops, the MX Series won’t let you down. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.
- Power: The MX60 pavement breakers deliver large blow energy thanks to our Power-Strok™ piston technology.
- 1-year warranty.
Product Application and Uses: Heavy asphalt removal, industrial maintenance, heavy demolition.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 70
Air Consumption @ Load (l/min): 1982
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.06
Bushing: Spring Loaded Anvil
Collar Type: Round
Color: Beige
Configuration/Handle Type: Vibration Reduced Flex T-Handle
Duty Rating: Industrial Duty
Exhaust Location: Side - Adjustable
Housing Material: Steel
Inline Oilers: Yes
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Muffler: Optional
Power Source: Air Powered
Product Length (in): 27.5
Product Weight (lb): 76
Retainer Type: Latch
Shank SIze (in): 1-1/4 X 6
Shank Type: Hex
Special Features: Vibration Reduced Flex Handle
Steels: Yes
Stroke Length (in): 5.75
Warranty: 1-year
Similar IR
- MX60B
$1,459.20
Holder
IR NS11-21
IR NS11-21
Holder for Ingersoll Rand 172LNA1, 182LNA1, 172L, 182G, 182L Scaler
$90.00
SPRING
IR NS11-27
IR NS11-27
Anvil Spring Replacement Part for Ingersoll Rand 182L, 172L Needle Scaler
For Use With- 172L
- 182L
$11.00
SPIKE DRIVER
IR MX60-SD
IR MX60-SD
Spike Driver, 5.75" Stroke, 1250 BPM, 2.06" Bore
The MX60 Series spike drivers deliver more blow energy to each spike than you’ll find anywhere else thanks to our Power-Strok™ piston technology. The drop-in composite valve cartridge prevents rust, while the one-piece breaker housing eliminates the need for side rods and springs.Features And Benefits
- Powerful: The MX Series spike drivers are powerful, but still easy to handle.
- Variable Exhaust Deflector: Choose where you want the exhaust air to flow with the MX Series’ 360-degree directional exhaust capabilities.
- Durable: The Ingersoll Rand MX Series spike drivers are rugged enough to tackle any job you throw their way.
Product Application and Uses: The spike driver is designed for driving cut spikes in the construction of new track and the relaying of old track with new rails.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 70
Air Consumption @ Load (l/min): 1982
Air Inlet: 3/4" NPT
Air Pressure (psi): 90
Blows per Min: 1250
Bore Diameter (in): 2.06
Color: Beige
Configuration/Handle Type: T-handle
Exhaust Location: Side - Adjustable
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 3/4
Power Source: Air Powered
Product Length (in): 27.5
Product Weight (lb): 69
Stroke Length (in): 5.75
Warranty: 1-year
$1,493.40
5" NEEDLE SET-STEEL QTY 1
IR NS11-22-19
IR NS11-22-19
5" Steel Needle Set, 1/8" Diameter for Ingersoll Rand Needle Scaler, Set of 19
Product Application and Uses: For use with 172, 182, 125-EU, MC121-NSA needle scalerFor Use With
- 172LNA1
- 182K1
- 182LNA1
Similar IR
- NS11-122-19
$30.00
Round Housing, Qty 1
IR NS11A
IR NS11A
Round Housing for Ingersoll Rand 172, 182 Needle Scaler
For Use With- 172LNA1
- 182LNA1
$385.00
PULLER, STEEL RATCHET
IR P15D3H
IR P15D3H
Ratchet Puller, 1 Ton Capacity, 7.5ft Lift
Extremely strong and well made, the Ingersoll Rand P-Series pullers are high quality, dependable wire rope pullers for low- and medium-duty pulling and lifting jobs.
Includes:
Product Application/Uses:
Features and Benefits:
- 4:1 design factor. Meets Specifications
- Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. All steel parts are plated for years of useful life.
- Exclusive long-life 'buttress tooth' cast gear design has no laminated plates to separate or wear and provides maximum strength.
- Sturdy steel drive and holding pawls have long life and stainless steel springs. All pivot points are hardened steel.
- Safety latch hooks are drop-forged steel, heat treated and plated for corrosion resistance. Top hook rotates 360° for easy operation.
- Galvanized aircraft quality wire rope is pre-formed to prevent kinks.
- Cast aluminum drum has through the drum anchor, larger diameter, and drum guard.
Capacity (lb): 2000
Lift (ft): 7.5
$226.80
PULLER (P6H)
IR P15H
IR P15H
Ratchet Puller, .5 Ton Capacity, 15ft Lift
Extremely strong and well made, the Ingersoll Rand P-Series pullers are high quality, dependable wire rope pullers for low- and medium-duty pulling and lifting jobs.
Product Application/Uses:
Features and Benefits:
- 4:1 design factor. Meets Specifications
- Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. All steel parts are plated for years of useful life
- Exclusive long-life 'buttress tooth' cast gear design has no laminated plates to separate or wear and provides maximum strength
- Sturdy steel drive and holding pawls have long life and stainless steel springs. All pivot points are hardened steel
- Safety latch hooks are drop-forged steel, heat treated and plated for corrosion resistance. Top hook rotates 360° for easy operation
- Galvanized aircraft quality wire rope is pre-formed to prevent kinks
- One year warranty
$192.78
SEAL
IR P250-283
IR P250-283
Seal Support Gasket Replacement Part for Ingersoll Rand 341, 441 Series Air Tamper
$15.00
RECIP SAW BLADE PACKAGE COARSE
IR P4CS-20
IR P4CS-20
4" Saw Blades, Coarse Standard Pitch, 24 TPI, 20-Pack for Ingersoll Rand Reciprocating Air Saw
Ingersoll Rand Air Reciprocating Saw Blades feature Bi-Metal technology, a solid-state diffusion prcess that applies high-speed steel to both edges of the backing material, increasing the contact area by 170%. This technology, coupled with a new saw tooth profile, reduces the frictional heat generated during the cutting process resulting in enhanced overall cutting performance. Pair with your Ingersoll Rand Edge Series 429G Air Saw. Set includes 20 saw blades.Features And Benefits
- Bi-Metal Technology: Increases contact area by 170%.
- New Saw Tooth Profile: Reduces the frictional heat generated during the cutting process resulting in enhanced overall cutting performance.
- Includes: (20) 4" coarse saw blades.
Includes: (20) 4" coarse saw blades.
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Teeth per Inch (TPI): 24
For Use With
- 429
- 429G
- 4429
$79.00
RECIP SAW BLADE PACKAGE COARSE
IR P4CS-6
IR P4CS-6
4" Saw Blades, Coarse Variable Pitch, 4-18 TPI, 6-Pack for Ingersoll Rand Reciprocating Saw
Bi-metal technology high speed steel increases blade control by 170%. New tooth profile generates smaller but more chips and reduces frictional heat.Includes: 6 saw blades
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Product Width (in): 3.5
Product Height (in): 21.5
For Use With
- 429
- 4429
- 529
$29.00
RECIP SAW BLADE PACKAGE VARIABLE
IR P4EV-6
IR P4EV-6
4" Saw Blades, Extra Coarse Variable Pitch, 14-18 TPI, 6-Pack for Ingersoll Rand Reciprocating Saw
Bi-metal technology high speed steel increases blade control by 170%. New tooth profile generates smaller but more chips and reduces frictional heat.Includes: 6 saw blades
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Product Width (in): 3.5
Product Height (in): 21.5
For Use With
- 429
- 4429
- 529
$29.00
RECIP SAW BLADE PACKAGE FINE
IR P4FS-6
IR P4FS-6
Air Reciprocating Saw Blades, 4-Inch Fine, 32 TPI, 6 pc.
Air Reciprocating Saw Blades, 6-pack Fine PitchFeatures And Benefits
- Bi-Metal Technology: a solid-state diffusion process that applies high-speed steel to both edges of the backing materials, increasing the contact area by 170%
- New Tooth Profile that reduces frictional heat generated during the cutting process to enhance performance
Includes: 6 fine standard pitch recip saw blades
Product Application and Uses: For use with reciprocating saws to cut all woods, nail embedded wood, composition material, plastic, non-ferrous metals
Blade Material: Bi-Metal
Finish: Steel
Number of Blades Included: 6
Product Length (in): 4.5
Product Width (in): 1.18
Product Height (in): 0.5
Product Weight (lb): 0.7
Teeth per Inch (TPI): 32
For Use With
- 429
- 4429
- 529
$29.00
BIT RETAINER BUFFER
IR PF2200-203
IR PF2200-203
Bit Retainer Buffer for Ingersoll Rand 125 Air Percussive Needle Scaler
$15.00
Needle Package
IR PF2219-22-19
IR PF2219-22-19
7" Needle Set, QTY 19 for Ingersoll Rand 125 Series Percussive Needle Scaler
For Use With- 125-A
- 180PG
- 180PG-KIT
$31.00
STEM O-RING
IR PF2200-53
IR PF2200-53
Stem O-Ring Replacement Part for Ingersoll Rand 125, 125CI Scaler
$15.00
Needle Housing
IR PF2219-24
IR PF2219-24
Needle Housing for Ingersoll Rand 125 Needle Scaler
Product Application and Uses: For use with Ingersoll Rand 125 Air ScalerSuperseded To
- 125-A-24
$57.00
Spring
IR PF2219-27
IR PF2219-27
Spring Replacement Part for Ingersoll Rand 125, and 125CI Scalers
Superseded To- 125-A-227
$9.00
THROTTLE VALVE
IR PF2200-49
IR PF2200-49
Throttle Valve Replacement Part for Ingersoll Rand 125, 125CI Scaler
$15.00
SPRING
IR PF2200-51
IR PF2200-51
Spring Replacement Part for Ingersoll Rand 125 Air Percussive Needle Scaler
$15.00
REVERSE VALVE GASKET
IR PF800-282
IR PF800-282
Reverse Valve Gasket Replacement Part for Ingersoll Rand 259G Impact Wrench
$15.00
Seal (48951-187)
IR PS3-67
IR PS3-67
Seal for Ingersoll Rand HLK, MLK Hoist and 231C Impact Wrench
$15.00
ENDPLATE GASKET
IR PF800-283
IR PF800-283
End Plate Gasket for Ingersoll Rand for 231 Series Impact Wrench
For Use With- 231C
$15.00
TROLLEY
IR PT010-8
IR PT010-8
Manual Push Trolley, 1 Ton Capacity, 8ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$279.45
TROLLEY (PT020B)
IR PT020-8
IR PT020-8
Manual Push Trolley, 2 Ton Capacity, 8ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$453.60
TROLLEY
IR PT005-8
IR PT005-8
Manual Trolley, 0.5 Ton Capacity, 8ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$206.55
TROLLEY
IR PT050-8
IR PT050-8
Manual Push Trolley, 5 Ton Capacity, 8ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$1,198.80
TROLLEY (PT030B)
IR PT030-8
IR PT030-8
Manual Push Trolley, 3 Ton Capacity, 8ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$805.95
TROLLEY
IR PT100-12
IR PT100-12
Manual Push Trolley, 10 Ton Capacity, 12ft Hand Chain Drop
Plain 1/2 - 10 Metric ton Capacity A plain trolley rated for both manual or powered hoists, with the versatility to fit most types of beams and compatibility to all hoist brands....with options and prices you won't believe.
Product Application/Uses:
Features and Benefits:
- The 5:1 design factor allows the PT Series to be used with both manual or powered hoists. Meets pertinent U.S. (ASME/ANSI and CMAA), Canadian and European standards.
- The side plates, including the rail sweeps/drop stops, are made of cold formed steel for strength, durability and even load distribution.
- The wheel axles are 'rivet-locked' in place so they will not come loose. They are NOT knurled, welded, or modified bolts.
- The wheels are cast iron. The 'universal' tread fits either flat or tapered beams.
- Wheels run on sealed, 'lubed-for-life' ball bearings. Smoother rolling with less effort and...less maintenance.
- Wide hanger shaft assemblies allow the PT Series trolley to fit almost any I-Beam, H-Beam or patented track beam up to 8.06 in./205 mm width.
- PT Series trolley hanger shafts are designed to accept all hoist brands. The hanger shaft has a 'squared out' recess to accept round or squared hook shapes.
- The trolleys are painted black for universal coordination.
- Shaft extension kits allow standard trolleys to fit almost any S-beam or patented track beam - flange adjustment 8'-13'. Please click on 'catalog section' for details.
$2,855.25
Spring
IR PX2-626
IR PX2-626
Throttle Valve Spring Replacement Part for Ingersoll Rand 182L, 172L, 172LNA1, 182LNA1 Needle Scaler
Product Application and Uses: For use with Ingersoll Rand 182L, 172L, 172LNA1, 182LNA1 needle scalers $15.00
NON SHUT OFF PULSE TOOL-1/4 HEX DRIVE
IR Q60PQ1
IR Q60PQ1
NON SHUT OFF PULSE TOOL-1/4 HEX DRIVE $1,855.41
