INGERSOLL-RAND IR TOOL S12880
INGERSOLL-RAND IR TOOL S12880 branded products
O-RING
IR BBFM-557
IR BBFM-557
Socket Retaining Ring for Ingersoll Rand 271, 285B, 295A, 2171XP Series 1" Drive Impact Wrench
Product Application and Uses: For use with Ingersoll Rand 271, 285B, 295A and 2171XP impact Wrenches.For Use With
- 2171XP
- 271
- 285B
- 285B-6
- 285B-6-AP
- 295A
$15.00
BEAM CLAMP - 1 TON -BCT SERIES
IR BCT-1
IR BCT-1
Beam Clamp, 1 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
$188.73
BEAM CLAMP - 10 TON - BCT SERIES
IR BCT-10
IR BCT-10
Beam Clamp, 10 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
$648.00
BEAM CLAMP - 3 TON -BCT SERIES
IR BCT-3
IR BCT-3
Beam Clamp, 3 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
$336.15
BEAM CLAMP - 2 TON -BCT SERIES
IR BCT-2
IR BCT-2
Beam Clamp, 2 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
$214.65
BEAM CLAMP - 5 TON - BCT SERIES
IR BCT-5
IR BCT-5
Beam Clamp, 5 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
$409.05
HOSE PER FT, SPECIFY LENGTH, NON-RETURNABLE PART
IR BH6C
IR BH6C
HOSE PER FT, SPECIFY LENGTH, NON-RETURNABLE PART $17.00
BALANCER
IR BHD-15
IR BHD-15
Heavy Duty Spring Balancer, 22-33 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This “gravity-free” effect on all B Series models allows users to move tools with minimal effort along cable travel.Features And Benefits
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
Cable Material: Stainless steel
Capacity (lb): 22 - 33
Color: Red
Duty Rating: Heavy Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Non-Locking
Lower Hook: Spring Loaded Safety Hook
Product Length (in): 8.7
Product Width (in): 9.8
Product Height (in): 24
Product Weight (lb): 22.7
Reel Height (in): 25.47
Reel Mount Type: Spring Loaded Safety Hook
Rotation Type: Swiveling
Tension Adjustment: Worm Screw
Warranty: 1-year
$1,250.00
BALANCER
IR BHD-20
IR BHD-20
Heavy Duty Spring Balancer, 33-44 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This “gravity-free” effect on all B Series models allows users to move tools with minimal effort along cable travel.Features And Benefits
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
Cable Material: Stainless steel
Capacity (lb): 33 - 44
Color: Red
Duty Rating: Heavy Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Non-Locking
Lower Hook: Spring Loaded Safety Hook
Product Length (in): 8.7
Product Width (in): 9.8
Product Height (in): 24
Product Weight (lb): 23.4
Reel Height (in): 25.47
Reel Mount Type: Spring Loaded Safety Hook
Rotation Type: Swiveling
Tension Adjustment: Worm Screw
Warranty: 1-year
$1,310.00
BALANCER
IR BHD-30
IR BHD-30
Heavy Duty Spring Balancer, 55-66 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This “gravity-free” effect on all B Series models allows users to move tools with minimal effort along cable travel.Features And Benefits
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
Cable Material: Stainless steel
Capacity (lb): 55 - 66
Color: Red
Duty Rating: Heavy Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Non-Locking
Lower Hook: Spring Loaded Safety Hook
Product Length (in): 8.7
Product Width (in): 9.8
Product Height (in): 24
Product Weight (lb): 25.4
Reel Height (in): 25.47
Reel Mount Type: Spring Loaded Safety Hook
Rotation Type: Swiveling
Tension Adjustment: Worm Screw
Warranty: 1-year
$1,520.00
BALANCER
IR BHD-65
IR BHD-65
Heavy Duty Spring Balancer, 121-143 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This “gravity-free” effect on all B Series models allows users to move tools with minimal effort along cable travel.Features And Benefits
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
Cable Material: Stainless steel
Capacity (lb): 121 - 143
Color: Red
Duty Rating: Heavy Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Non-Locking
Lower Hook: Spring Loaded Safety Hook
Product Length (in): 8.7
Product Width (in): 9.8
Product Height (in): 24
Product Weight (lb): 30
Reel Height (in): 25.47
Reel Mount Type: Spring Loaded Safety Hook
Rotation Type: Swiveling
Tension Adjustment: Worm Screw
Warranty: 1-year
$2,110.00
Battery, IQV20V 2.5AH
IR BL2012
IR BL2012
IQV20 20V 2.5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
The BL2012 IQV20 Series High Capacity r2.5 lithium ion battery delivers a high-charge capacity with low internal impedance for maximum power delivery and run-time. The intelligent Battery Management System allows the battery to communicate with the tool and charger to offer triple battery protection. The slim pack design is fully compatible with our charger.Features And Benefits
- Performance: The BL2012 20V 2.5Ah battery delivers 95% longer run time than its predecessor the BL2005 (That's over 221 lug nuts when used with the W5130!). And at the same size and weight as the previous model you can get more work done on a single charge.
- Durability: The intelligent Battery Management System (BMS) allows the battery to communicate with the tool and charger to offer triple battery protection prevent over loading over charging and over discharging for longer tool and battery life.
- Versatility: The BL2012 2.5Ah batteries slim design allows you to go further with less in your way. Its light weight doesn't compromise power letting you keep working on big jobs with a slimmer tool.
- Battery Fuel Gauge - 4 light positions
- Quick charging feature in one hour or less
Product Application and Uses: IQV20 Series cordless tools
Battery Capacity (Ah): 2.5
Battery Capacity (Wh): 49
Charge Time: 40 minutes
Color: Grey
Number of Battery Cells: 5
Power Source: Battery Powered
Product Length (in): 4.8
Product Width (in): 3.1
Product Height (in): 2.1
Product Weight (lb): 0.95
Voltage DC: 20
Warranty: 2-year
Battery Type: Tabbed
For Use With
- D3141
- D3141-K22
- D3141-K22-AP1
- D3141-K22-AR
- D3141-K22-BR
- D3141-K22-CN
- D3141-K22-EU
- D3141-K22-IN
- D3141-K22-JP
- D3141-K22-KR
- D3411
- D3411-K22
- D3411-K22-AP1
- D3411-K22-CN
- D3411-K22-EU
- D3411-K22-IN
- D3411-K22-JP
- G4621
- IQV20-K201
- QCN2A30S6
- QCN2P02Q4
- QCN2P08Q4
- QCN2P12Q4
- QCP2A30S6
- QCP2A30S6-K2-CN
- QCP2A30S6-K2-EU
- QCP2A30S6-K2-IN
- QCP2P02Q4
- QCP2P04Q4
- QCP2P04Q4-K2-CN
- QCP2P04Q4-K2-EU
- QCP2P04Q4-K2-IN
- QCP2P08Q4
- QCP2P08Q4-K2-CN
- QCP2P08Q4-K2-EU
- QCP2P08Q4-K2-IN
- QCP2P12Q4
- QCP2P12Q4-K2-CN
- QCP2P12Q4-K2-EU
- QCP2P12Q4-K2-IN
- R3130
- R3150
- RTS025PQ4
- RTS060PH6
- RTS060PS8
- RTS140PH8
- RTS140PS8
- RTS225PH8
- W3131
- W5133
- W5133-K12
- W5133-K22
- W5133-K22-CN
- W5133-K22-EU
- W5133-K22-KR
- W5133P
- W5133P-C1D2
- W5133P-C1D2-K22
- W5133P-K22
- W5153
- W5153-K22
- W5153-K22-AUNZ
- W5153-K22-CN
- W5153-K22-EU
- W5153-K22-KR
- W5153-K22-SGHK
- W5153P
- W5153P-C1D2
- W5153P-C1D2-K22
- W5153P-K22
- W5330
- W5350
- W7152-K12
- W7152-K22
- W7152P
- W7153
- W7172-K22
- W7252
- W7252-K22
- W7252-K22B-EU
- W7252-TL
- W7253-TL
- W8171
- W8171-K2
- W8171-K2-AP1
- W8171-K2-CN
- W8171-K2-EU
- W8171-K2-IN
- W8171-K2-JP
- W8171-K2-KR
- W8191
- W8191-K2
- W8191-K2-AP1
- W8191-K2-CN
- W8191-K2-EU
- W8191-K2-IN
- W8191-K2-JP
- W8191-K2-KR
- W8571
- W8571-K2
- W8571-K2-AP1
- W8571-K2-CN
- W8571-K2-EU
- W8571-K2-IN
- W8571-K2-JP
- W8571-K2-KR
- W8591
- W8591-K2
- W8591-K2-AP1
- W8591-K2-CN
- W8591-K2-EU
- W8591-K2-JP
- W8591-K2-KR
Similar IR
- BL2013
Supersedes
- BL2010
$220.00
Battery, 20V, 5.0 Ah
IR BL2022
IR BL2022
IQV20 20V 5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
The BL2022 IQV20 Series High Capacity x5.0 Battery delivers unmatched performance with 68% longer run time and the same size and weight as its predecessor. Fully compatible with all existing IQV20 tools and chargers and equipped with the same intelligent Battery Management System (BMS) we make sure you get more out of every volt.Features And Benefits
- Power: High Capacity 20V 5.0Ah battery delivers longer run time to get more work done on a single charge.
- Optimization: Intelligent Battery Management System protects against over loading, over charging and over discharging for longer tool and battery life.
- Compatibility: BL2022 5.0Ah battery is compatible with all IQV20 series power tools and 20V battery charger allowing you to swap batteries and tools to get the job done right every time.
- Performance: The BL2022 Lithium-Ion 20V 5.0Ah battery delivers 66% longer run time than its predecessor (That’s over 800 lug nuts when used with the IR W7150 cordless impact wrench).
- Battery Fuel Gauge - 4 light positions.
- Quick charging feature in one hour or less.
Product Application and Uses: IQV20 Series cordless tools
Battery Capacity (Ah): 5
Battery Capacity (Wh): 100
Charge Time: 80 minutes
Color: Grey
Number of Battery Cells: 10
Power Source: Battery Powered
Product Length (in): 4.8
Product Width (in): 3.1
Product Height (in): 2.8
Product Weight (lb): 1.61
Voltage DC: 20
Warranty: 2-year
Battery Type: Tabbed
For Use With
- C5101
- D3141
- D3141-K22
- D3141-K22-AR
- D3141-K22-BR
- D3141-K22-CN
- D3141-K22-EU
- D3141-K22-IN
- D3141-K22-JP
- D3141-K22-KR
- D3411
- D3411-K22
- D3411-K22-AP1
- D3411-K22-CN
- D3411-K22-EU
- D3411-K22-IN
- D3411-K22-JP
- D5140-K22-EU
- D5241
- D5241-K22
- D5241-K22-AP1
- D5241-K22-AR
- D5241-K22-BR
- D5241-K22-CN
- D5241-K22-EU
- D5241-K22-IN
- D5241-K22-JP
- D5241-K22-KR
- G5351
- G5351-K22
- G5351M
- G5351M-K22-AP
- G5351M-K22-AR
- G5351M-K22-BR
- G5351M-K22-EU
- G5351M-K22-IN
- G5351M-K22-JP
- QCN2A30S6
- QCN2P02Q4
- QCN2P08Q4
- QCN2P12Q4
- QCP2A30S6
- QCP2A30S6-K2-CN
- QCP2A30S6-K2-EU
- QCP2A30S6-K2-IN
- QCP2P02Q4
- QCP2P04Q4
- QCP2P04Q4-K2-CN
- QCP2P04Q4-K2-EU
- QCP2P04Q4-K2-IN
- QCP2P08Q4
- QCP2P08Q4-K2-CN
- QCP2P08Q4-K2-EU
- QCP2P08Q4-K2-IN
- QCP2P12Q4
- QCP2P12Q4-K2-CN
- QCP2P12Q4-K2-EU
- QCP2P12Q4-K2-IN
- RTS025PQ4
- RTS060PH6
- RTS060PS8
- RTS140PH8
- RTS140PS8
- RTS225PH8
- W3111-K12-AR
- W3111-K12-BR
- W3111-K22
- W3111-K22-AP1
- W3111-K22-CN
- W3111-K22-EU
- W3111-K22-IN
- W3111-K22-JP
- W3111-K22-KR
- W5133
- W5153
- W7153
- W7172
- W7252-TL
- W7253-TL
- W8171-K2
- W8171-K2-AP1
- W8171-K2-CN
- W8171-K2-EU
- W8171-K2-IN
- W8171-K2-JP
- W8171-K2-KR
- W8191
- W8191-K2
- W8191-K2-AP1
- W8191-K2-CN
- W8191-K2-EU
- W8191-K2-IN
- W8191-K2-JP
- W8191-K2-KR
- W8571
- W8571-K2
- W8571-K2-AP1
- W8571-K2-CN
- W8571-K2-IN
- W8571-K2-JP
- W8571-K2-KR
- W8591
- W8591-K2
- W8591-K2-AP1
- W8591-K2-CN
- W8591-K2-EU
- W8591-K2-JP
- W8591-K2-KR
- W9491
- W9491-K2E
- W9491-K2E-EU
- W9491-K4E
- W9491-K4E-EU
- W9691
- W9691-K2E
- W9691-K4E
- W9691-K4E-EU
Similar IR
- BL2023
Supersedes
- BL20
$300.00
BALANCER
IR BLD1
IR BLD1
Light Duty Ergonomic Tool Balancer, 0.9-2.2 lb Capacity, 5.2' Lift
With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.Features And Benefits
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Includes: Balancer, Cable and Upper Suspension Shackle
Product Application and Uses: Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
Cable Material: Stainless steel
Capacity (lb): 0.88 - 2.20
Color: Red
Duty Rating: Light Duty
Housing Material: Aluminum
Lift (ft): 5.2
Lock Mechanism: Non-Locking
Product Length (in): 11.5
Product Width (in): 4.4
Product Height (in): 10.25
Product Weight (lb): 1.6
Reel Height (in): 11.1
Reel Mount Type: Suspension Shackle
Rotation Type: Fixed
Special Features: Adjustable Capacity
Special Features: Anti Friction Cable Guide
Tension Adjustment: Rotation
Warranty: 1-year
For Use With
- 1RLNS1
- 1RPLS1
- 1RPMS1
- 1RPNS1
- 1RPQS1
- 7RAMC1
- 7RAMC1-EU
Similar IR
- BLD2
- BLD3
- BMDS-2
$113.00
Balancer
IR BMDS-8
IR BMDS-8
Medium Duty Short Cable Spring Balancer, 13.2-17.6 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.Features And Benefits
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments; on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
Cable Material: Stainless steel
Capacity (lb): 13.2 - 17.6
Color: Red
Duty Rating: Medium Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Ratchet
Lower Hook: Spring Clip
Product Length (in): 11.75
Product Width (in): 5.75
Product Height (in): 3.4
Product Weight (lb): 5.5
Reel Height (in): 13.78
Reel Mount Type: Suspension Shackle
Rotation Type: Fixed
Tension Adjustment: Front Screw with Spanner Wrench
Warranty: 1-year
$350.00
BALANCER
IR BMDS-4
IR BMDS-4
Medium Duty Short Cable Spring Balancer, 4.4-8.8 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.Features And Benefits
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments; on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
Cable Material: Stainless steel
Capacity (lb): 4.4 - 8.8
Color: Red
Duty Rating: Medium Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Ratchet
Lower Hook: Spring Clip
Product Length (in): 11.75
Product Width (in): 5.75
Product Height (in): 4.1
Product Weight (lb): 4.4
Reel Height (in): 13.78
Reel Mount Type: Suspension Shackle
Rotation Type: Fixed
Tension Adjustment: Front Screw with Spanner Wrench
Warranty: 1-year
Similar IR
- BLD2
- BLD3
$320.00
BALANCER CONTROL KIT INLINE HANDLE
IR BW-IH-KIT
IR BW-IH-KIT
BALANCER CONTROL KIT INLINE HANDLE $2,530.00
Balancer
IR BMDS-6
IR BMDS-6
Medium Duty Short Cable Spring Balancer, 8.8-13.2 lb Capacity, 6.5' Lift
B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.Features And Benefits
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments; on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
Cable Material: Stainless steel
Capacity (lb): 8.8 - 13.2
Color: Red
Duty Rating: Medium Duty
Housing Material: Aluminum
Lift (ft): 6.5
Lock Mechanism: Ratchet
Lower Hook: Spring Clip
Product Length (in): 11.75
Product Width (in): 5.75
Product Weight (lb): 5.1
Reel Height (in): 13.78
Reel Mount Type: Suspension Shackle
Rotation Type: Fixed
Tension Adjustment: Front Screw with Spanner Wrench
Warranty: 1-year
$335.00
Balancer
IR BLD3
IR BLD3
Light Duty Ergonomic Tool Balancer, 4.4-6.5 lb Capacity, 5.2' Lift
With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.Features And Benefits
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Includes: Balancer, Cable and Upper Suspension Shackle
Product Application and Uses: Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
Cable Material: Stainless steel
Capacity (lb): 4.4 - 6.6
Color: Red
Duty Rating: Light Duty
Housing Material: Aluminum
Lift (ft): 5.2
Lock Mechanism: Non-Locking
Lower Hook: Spring Clip
Product Length (in): 11.5
Product Width (in): 4.4
Product Height (in): 10.25
Product Weight (lb): 1.6
Reel Height (in): 11.1
Reel Mount Type: Suspension Shackle
Rotation Type: Fixed
Special Features: Adjustable Capacity
Special Features: Anti Friction Cable Guide
Tension Adjustment: Rotation
Warranty: 1-year
Similar IR
- BLD2
- BLD1
- BMDS-2
- BMDS-4
- BLD1/P
$130.00
Distributor Pneumatique 5/3 Centre Ferme
IR 38776332
IR 38776332
Distributor Pneumatique 5/3 Centre Ferme Call for pricing
THROTTLE VALVE PLUNGER
IR 3940A-302
IR 3940A-302
Throttle Valve Plunger Service Part for Ingersoll Rand Power Tools
$91.00
1" IMPACTOOL, ATEX
IR 3940B2TIEX
IR 3940B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 2750 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.Features And Benefits
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: High torque output of 2750 ft-lbs and 800 blows per minute. The reverse bias motor helps remove the most stubborn bolts and the twin hammer mechanism ensures consistent power and balance.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 64
Average Air Consumption (l/min): 1812
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2750
Max Torque (in-lb): 33004
Max Torque (nm): 3729
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
Product Length (in): 13.5
Product Weight (lb): 21.2
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 500-1800
Recommended Forward Torque Range (in-lb): 6001-21596
Recommended Forward Torque Range (nm): 678-2440
Retainer Type: Thru-hole
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 13.1
Vibration Uncertainy K* (m/s2): 1.6
Warranty: 1-year
Similar IR
- 3942B2TIEX
$6,727.50
3940-TK1-Tune Up Kit
IR 3940-TK1
IR 3940-TK1
Tune-up Kit for Ingersoll Rand 3940 Series Air Impact Wrench
Includes: (2) Seals, (1) Throttle Valve Spring, (1) Air Strainer Screen, (4) Gasket, (1) Rear Motor Bearing, (1) Front Motor Bearing, Vane pack, (3) Springs, (1) Ball, (1) PinProduct Application and Uses: For use with Ingersoll Rand 3940A1TI, 3940A2TI, 3940B1TI, 3940B2TI, 3940B2TIEX Impact wrenches
For Use With
- 3940B2TI
- 3940B2TIEX
- 3940P2TI
$220.00
IMPACTOOL
IR 3942B1TI
IR 3942B1TI
No. 5 Spline Air Impact Wrench, Super Duty, 3250 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
With a titanium hammercase, bronze end plates and torque up to 3,250 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses: Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 95
Average Air Consumption (l/min): 2690
Blows per Min: 850
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): No. 5
Drive Type: Spline
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 3250
Max Torque (in-lb): 39005
Max Torque (nm): 4407
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 14.3
Product Weight (lb): 22.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3000
Recommended Forward Torque Range (in-lb): 36005
Recommended Forward Torque Range (nm): 4068
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 16.9
Vibration Uncertainy K* (m/s2): 4.6
Warranty: 1-year
Similar IR
- 3940A1TI
- 3940B1TI
- 3955B1TI
$5,140.50
1" IMPACTOOL, ATEX
IR 3942B2TIEX
IR 3942B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 3250 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 3250 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.Features And Benefits
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Environment, Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 95
Average Air Consumption (l/min): 2690
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 3250
Max Torque (in-lb): 39005
Max Torque (nm): 4407
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144
Product Length (in): 14.3
Product Weight (lb): 22.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3000
Recommended Forward Torque Range (in-lb): 36005
Recommended Forward Torque Range (nm): 4068
Retainer Type: Thru-hole
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 16.9
Vibration Uncertainy K* (m/s2): 4.6
Warranty: 1-year
Similar IR
- 3940B2TIEX
$7,245.00
1.5" IMPACTOOL 3955A2TI
IR 3955A2TI
IR 3955A2TI
1-1/2" Air Impact Wrench, Super Duty, 5000 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Outside Trigger
With a titanium hammercase, bronze end plates and torque up to 5,000 ft-lbs of torque, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
Product Application and Uses: Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 80
Average Air Consumption (l/min): 2266
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
Max Free Speed (rpm): 2750
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5000
Max Torque (in-lb): 60000
Max Torque (nm): 6779
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 16.5
Product Weight (lb): 34.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3900
Recommended Forward Torque Range (in-lb): 46803
Recommended Forward Torque Range (nm): 5288
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Tool Type: High-torque
Vibration Level (m/s2): 20.8
Vibration Uncertainy K* (m/s2): 8.5
Warranty: 1-year
Similar IR
- 3956A2TI
Superseded To
- 3956A2TI
$6,279.00
Cap Screw, Socket Head
IR 3955-638
IR 3955-638
Socket Head Cap Screw Service Part for Ingersoll Rand Power Tools, Qty 4
$15.00
1.5" IMPACTOOL, ATEX
IR 3955B2TIEX
IR 3955B2TIEX
1-1/2" Air Impact Wrench, ATEX Rated, 5000 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with a titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 5000 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry.ATEX Markings: ATEX 2014/34/EU and Ex h IIA T6 Gb XISO 80079-36 CertifiedFeatures And Benefits
- Environmental, Heath and Safety: ISO 80079-36 Certified and ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this series is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 80
Average Air Consumption (l/min): 2266
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
Max Bolt Diameter (in): 1-1/2
Max Free Speed (rpm): 2750
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5000
Max Torque (in-lb): 60000
Max Torque (nm): 6779
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144.5
Product Length (in): 16.6
Product Width (in): 8.2
Product Height (in): 5.3
Product Weight (lb): 34.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 4700
Recommended Forward Torque Range (in-lb): 56397
Recommended Forward Torque Range (nm): 6372
Retainer Type: Thru-hole
Side to Center Distance (in): 4.1
Side to Center Distance (mm): 104
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 20.8
Vibration Uncertainy K* (m/s2): 8.5
Warranty: 1-year
Similar IR
- 3955B2TI
Superseded To
- 3956B2TIEX
$7,141.50
HAMMER CASE GASKET
IR 3955-36
IR 3955-36
Hammer Case Gasket Service Part for Ingersoll Rand Power Tools
$15.00
1.5 IMPACT WRENCH
IR 3956B2TI
IR 3956B2TI
1-1/2" Air Impact Wrench, 5450 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
The 3956 Series Titanium Pneumatic Impacts has a 360° D-auxiliary handle ensures enhanced ergonomic performance, with greater access and less operator fatigue. An increased power rating provides the confidence you need to power through the toughest of jobs. Our brand name prominently and proudly emblazoned on the side lets you know it’s from the first name in impact tools: Ingersoll Rand®. Because when it comes to performance, durability and reliability, there is simply no substitute for the best.Features And Benefits
- Performance: Best-in-class power-to-weight performance, delivering 5,450 ft-lbs (7,300 Nm) of breakaway torque.
- Ergonomic: Ergonomically enhanced 360° D-auxiliary handle.
- Reliability: Assembled in the USA and backed by our broad network of parts and service to ensure unsurpassed serviceability.
- Durability: Optimized titanium hammercase, along with bronze endplates and corrosion-resistant parts.
Includes: Hanger Bracket
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Consumption @ Load (cfm): 105
Air Consumption @ Load (l/min): 2971.5
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 145
Average Air Consumption (l/min): 4103.5
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Configuration/Handle Type: Auxiliary Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Industrial Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 98.8 / 109.8
Hammer Case: Titanium
Handle Material: Aluminum
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 97.9 / 108.9
Max Bolt Diameter (in): 1-1/2
Max Free Speed (rpm): 3600
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5384
Max Torque (in-lb): 64610
Max Torque (nm): 7300
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Nut-busting/Breakaway Torque (ft-lb): 5384
Nut-busting/Breakaway Torque (in-lb): 64610
Nut-busting/Breakaway Torque (nm): 7300
Power Source: Air Powered
Product Length (in): 16.68
Product Width (in): 5.26
Product Height (in): 11.31
Product Weight (lb): 34.3
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 5178
Recommended Forward Torque Range (in-lb): 62132
Recommended Forward Torque Range (nm): 7020
Retainer Type: Thru-hole
Side to Center Distance (in): 2.67
Side to Center Distance (mm): 68
Standard Bolt Capacity (in): 2
Standards/Certifications: ISO11148-6 2012, CAGIB186.1-2009, ISO 28927-2, ISO 15744
Tool Type: High-torque
Vanes: 7
Vibration Level (m/s2): 16.4
Vibration Uncertainy K* (m/s2): 5.6
Warranty: 1-year
Similar IR
- 3955B2TI
Supersedes
- 3955B2TI
$5,382.00
CHIPPER ROUND NOZZLEW/RETAINER
IR 3A2SA
IR 3A2SA
Air Chipping Hammer, 3" Stroke, 1725 BPM, Round Shank Oval Collar
Whether you’re working in construction or demolition, the A Series chipping hammers are great for any job. With its incredible power-to-weight ratio, these hammers will increase productivity and make working easy.Features And Benefits
- Durability: The A Series chipping hammers are equipped with a rubber buffer retainer and threaded barrels to extend the life of your product.
- Reliability: The A Series hammers have lock spring retainers that make sure the steel stays in place.
- Access: With a swan neck handle and long nozzle, you’ll be able to work in tight, hard to reach spaces with ease.
Product Application and Uses: These Air Percussive Chipping Hammers are designed for chipping, cutting, chiseling and breaking of hardened materials through repetitive application of linear impacts of a tool steel that is retained and driven by the chipper.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 29
Air Consumption @ Load (l/min): 821
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1725
Bore Diameter (in): 1.125
Collar Type: Oval
Color: Beige
Configuration/Handle Type: Swan Neck
Duty Rating: Industrial Duty
Height Over Spindle (in): 4
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Muffler: No
Power Source: Air Powered
Product Length (in): 17.88
Product Width (in): 9
Product Weight (lb): 15.63
Retainer Type: Lock-spring (Plain Arrow)
Shank SIze (in): 0.68
Shank Type: Round
Standards/Certifications: Standards
Steels: Yes
Stroke Length (in): 3
Warranty: 1-year
Similar IR
- 2A1SA
- W2A2
- W2A1
$581.40
O-Ring (48951-139)
IR 405-159
IR 405-159
Throttle Valve Face for Ingersoll Rand Impact/Angle Wrenches
For Use With- 231C
- 2705P1
- 2707P1
- 9RSQ83
- 9SQ83
$15.00
Vane Pack
IR 401-42A-6
IR 401-42A-6
Vane Pack for Ingersoll Rand 1702, 211, 212, 215 Series Impact Wrench, 6-Pack
For Use With- 1702P1
- 1702P4
- 1702SB1
$30.00
DIE GRINDER, 0.50 HP, 27K rpm, Straight, 1/4" C
IR 409
IR 409
Air Die Grinder, 27,000 RPM, 0.5HP, 1/4" & 6mm Collets, Front Exhaust
With a powerful vane motor and ergonomic front exhaust to direct air away from your workspace, the 409 Die Grinder is a tough tool to have in your arsenal.Features And Benefits
- Comfort: This die grinder is lightweight and ergonomic, so you can do more work for longer stretches of time.
- Access: The compact 409 Die Grinder allows you to reach tighter spaces with ease.
- Increased Safety: With a locking throttle lever that resets each time the lever is released, the 409 increases operator safety by preventing accidental throttle operation.
Includes: Tool, (2) Wrenches, 6mm Collet and Manuals
Product Application and Uses: De-burring, Polishing, Porting, Smoothing Edges, Weld Grinding
Actuation/Throttle Type/Switch Location: Bottom
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 1/4"
Arbor/Collet: 6mm
Bearing Type: Ball Bearing
Configuration/Handle Type: Straight
Duty Rating: Medium Duty
Exhaust Location: Front
Grinder Type: Die Grinder
Housing Material: Aluminum
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 27000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 5.87
Product Width (in): 3.46
Product Height (in): 2.36
Product Weight (lb): 1.2
Rated Power (hp): 0.5
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Sound Pressure/Power Db(A): 90.9 / 101.9
Speed Setting: Variable Speed
Standards/Certifications: 2006/42/Ec, Iso 28927-12, Iso 15744, Iso 11148-9
Vibration Level (m/s2): 6.4
Warranty: 1-year
Wheel Type: Burr
Similar IR
- 307B
- 308B
- 5108MAX
$110.58
Sander
IR 4151
IR 4151
Random Orbital Air Sander, 3/16" Orbit, 6" Vinyl Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra-high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability- Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Bare Tool
Product Application and Uses: Smoothing, Sanding, Automotive Repair
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Air Gear Motor
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 7.48
Product Width (in): 6.8
Product Height (in): 4.8
Product Weight (lb): 1.92
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6 / 92.6
Special Features: Lubrication-free motor
Speed Setting: Variable Speed
Standards/Certifications: Ce
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 7.5
Warranty: 1-year
Similar IR
- 4152
- 4151-HL
- 4151-2
- 4151-5
- 317-B
$208.05
SANDER
IR 4151-2
IR 4151-2
Random Orbital Air Sander, 3/16" Orbit, 6" Vinyl Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Extended Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 9.9
Product Height (in): 4.8
Product Weight (lb): 2.46
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 6.2
Warranty: 1-year
Similar IR
- 4152
$370.00