GRACO INC. S10595
GRACO INC. S10595 branded products
Em Series Em8 Valve, 1/2 Npt x 3/4 Orb
GG 25D433
GG 25D433
Em Series Em8 Valve, 1/2 Npt x 3/4 Orb
$335.00
Kit, 12 Valve Cc Control
GG 25D480
GG 25D480
KIT,12 VALVE CC CONTROL
Graco 25D480 12 Valve Color Change Solenoid Module Kit
$7,430.00
KIT, PD2K REMOTE MAN, DVM HP
GG 25D605
GG 25D605
KIT, PD2K REMOTE MAN, DVM HP
ProMix PD2K High Pressure Remote Manifold Custom Valve Mapping KitTo add optional color change function and at-the-gun mixing of two component materials when used with a ProMix PD Proportioner for Automatic Spray Applications.
$3,490.00
KIT, PD2K REMOTE MANIFOLD, DVM LP
GG 25D543
GG 25D543
KIT, PD2K REMOTE MANIFOLD, DVM LP
Graco 25D543 ProMix PD2K Low Pressure Remote Manifold Custom Valve Mapping Kit
To add optional color change function and at-the-gun mixing of two component materials when used with a ProMix PD Proportioner for Automatic Spray Applications.
- Model: ProMix
- Series: PD2K
$2,930.00
KIT, POTENTIOMETER, IND HAZLOC
GG 25F103
GG 25F103
KIT, POTENTIOMETER, IND HAZLOC
QUANTM i-Series Pump Control Knob for Hazardous Location Industrial Pump ModelsIncludes:
- 1 control knob bracket
- 2 fasteners
- 1 control encoder
- 1 push nut
- 1 control knob with 2 fasteners, hex head
- 1 seal
- 1 packet of anti-seize lubricant
$88.25
KIT, ACCESSORY, LEAK SENSE
GG 25F108
GG 25F108
KIT, ACCESSORY, LEAK SENSE
Graco 25F108 Standard Location Leak Sensor Accessory Kit
- Includes:
1 level switch sensor
1 reducer fitting
2 elbow swivels (1/4 in. NPT, 3/8 in. hose port)
1 tee union
1 hose (30 in. long, 3/8 in. outer diameter)
1 breather
- Application: Industrial
- Kit Type: Accessory Kit
$154.50
KIT, ACCESSORY, LEAK SENSE HAZ
GG 25F109
GG 25F109
KIT, ACCESSORY, LEAK SENSE HAZ
Graco 25F109 Hazardous Location Leak Sensor Accessory Kit
- Includes:
1 level switch sensor
2 elbow swivels (1/4 in. NPT, 3/8 in. hose port)
1 tee union
1 hose (30 in. long, 3/8 in. outer diameter)
1 elbow swivel (1/4 in. NPT, 1/4 in hose port)
1 elbow swivel (1/8 in. NPT)
1 hose (20 in. long, 1/4 in. outer diameter)
1 pipe bushing
$337.00
KIT, REPAIR, Q30 ROTOR
GG 25F122
GG 25F122
KIT, REPAIR, Q30 ROTOR
QUANTM i/h30 Rotor Kit Includes:- 1 rotor with bearing
- 1 shaft
$921.00
MANIFOLD, AUTO, GUN
GG 25F155
GG 25F155
MANIFOLD, AUTO, GUN
Stellair Auto Manifold, Side Fluid Inlet, with Inch Threads Side fluid inlet manifold connects a Stellair Auto air spray gun to an automated finishing system’s robot, reciprocator, or flat line machine. Manifold sets automatic air spray gun in place to produce stellar results for industrial finishing of automotive components, industrial metal and plastic parts, wood products and architectural structures. Stellair Auto manifold has the same tool center point as legacy AirPro Auto air spray guns, making it easy to upgrade paint line and spray booth equipment. Durable and lightweight construction reduces equipment wear, especially on high speed production lines. Two-screw, gun-to-manifold connection simplifies automatic air spray gun removal and maintenance.
$353.00
GUN, AUTO, CONV, .042, ADJ
GG 25F168
GG 25F168
GUN, AUTO, CONV, .042, ADJ
Stellair Automatic Air Spray Gun, Conventional, 0.042 in (1.1 mm) Nozzle for General Industry with fluid control knob Conventional air spray gun delivers stellar results as part of a robotic, reciprocator, flat line or other automated finishing system. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. Conventional is the most widely used air spray method, producing Class A, automotive finish quality. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Precise fluid flow control click knob with true zero set point ensures accurate paint thickness. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime. Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$1,220.00
GUN, AUTO, HVLP, .070
GG 25F173
GG 25F173
GUN, AUTO, HVLP, .070
Graco 25F173 Stellair Automatic Air Spray Gun, HVLP, 0.070 in (1.8 mm) Nozzle for General Applications
High volume low pressure (HVLP) air spray gun produces stellar results on an automated paint line or in a robotic spray booth.
Application: Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures.- High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
- General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure.
- Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving.
- Small and light size does not weigh down or wear out robot arms, reciprocators or flat line machines.
- Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
- Application: General
- Applicator Type: Automatic
- Body Material: Metal
- Compatible Material: Adhesives, Ceramics, Fast-Set, High Solids, Sealants, Solvent borne Paints, Stains, UV Coating, Waterborne
- Fluid Adjustment Knob: N/A
- Fluid Orifice Size (in): 0.070
- Fluid Orifice Size (mm): 1.8
- Gun Model: Stellair
- Gun Series: Automatic
- Gun Type: HVLP Gun
- Gun Weight (g): 430
- Gun Weight (lb): 1
- Manifold Type: Not Included
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (oz/min): 20
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Working Pressure (bar): 21
- Maximum Fluid Working Pressure (MPa): 2.1
- Maximum Fluid Working Pressure (psi): 300
- Minimum Air Inlet Pressure (bar): 3.4
- Minimum Air Inlet Pressure (MPa): 0.34
- Minimum Air Inlet Pressure (psi): 50
- Needle Tip Material: PEEK
- Nozzle Size (in): 0.070
- Nozzle Size (mm): 1.8
- Overall Height (in): 1.9
- Overall Height (mm): 48.3
- Overall Length (in): 5.10
- Overall Length (mm): 129.5
- Overall Width (in): 1.63
- Overall Width (mm): 41.4
$1,180.00
Stellair Automatic Air Spray Gun, Compliant, 0.030 In Nozzle For General Applications
GG 25F181
GG 25F181
Stellair Automatic Air Spray Gun, Compliant, 0.030 In Nozzle For General Applications
$1,260.00
GUN, AUTO, CONV, .030, ADJ
GG 25F167
GG 25F167
GUN, AUTO, CONV, .030, ADJ
Stellair Automatic Air Spray Gun, Conventional, 0.030 in (0.8 mm) Nozzle for General Industry with fluid control knob Conventional air spray gun delivers stellar results as part of a robotic, reciprocator, flat line or other automated finishing system. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. Conventional is the most widely used air spray method, producing Class A, automotive finish quality. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Precise fluid flow control click knob with true zero set point ensures accurate paint thickness. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime. Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$1,220.00
GUN, AUTO, CONV, .055, ADJ
GG 25F169
GG 25F169
GUN, AUTO, CONV, .055, ADJ
Stellair Automatic Air Spray Gun, Conventional, 0.055 in (1.4 mm) Nozzle for General Industry with fluid control knob Conventional air spray gun delivers stellar results as part of a robotic, reciprocator, flat line or other automated finishing system. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. Conventional is the most widely used air spray method, producing Class A, automotive finish quality. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Precise fluid flow control click knob with true zero set point ensures accurate paint thickness. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime. Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$1,220.00
GUN, AUTO, HVLP, .042, ADJ
GG 25F175
GG 25F175
GUN, AUTO, HVLP, .042, ADJ
Stellair Automatic Air Spray Gun, HVLP, 0.042 in (1.1 mm) Nozzle for General Industry with fluid control knob High volume low pressure (HVLP) air spray gun produces stellar results on an automated paint line or in a robotic spray booth. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Precise fluid flow control click knob with true zero set point ensures accurate paint thickness. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime. Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$1,260.00
GUN, AUTO, HVLP TRIM, .042, ADJ
GG 25F206
GG 25F206
GUN, AUTO, HVLP TRIM, .042, ADJ
Graco 25F206 Stellair Automatic Air Spray Gun, HVLP Trim, 0.042 in (1.1 mm) Nozzle for General Applications with fluid control knob
High volume low pressure (HVLP) air spray gun produces stellar results for general industry applications using robots, reciprocators, flat line machines or other automated finishing technologies.
Application: Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures.- High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
- Trim air cap produces a well-defined edge with minimal overspray that’s required for edges, trim, dielectric coating and other selective applications.
- Precise fluid flow control click knob with true zero set point ensures accurate paint thickness.
- One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
- Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
- Application: General
- Applicator Type: Automatic
- Body Material: Metal
- Compatible Material: Dielectrics, Fast-Set, High Solids, Solvent borne Paints, Stains, UV Coating, Waterborne
- Fluid Adjustment Knob: Clicking
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.10
- Gun Model: Stellair
- Gun Series: Automatic
- Gun Type: HVLP Gun
- Gun Weight (g): 430
- Gun Weight (lb): 1
- Manifold Type: Not Included
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (oz/min): 14
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Working Pressure (bar): 21
- Maximum Fluid Working Pressure (MPa): 2.1
- Maximum Fluid Working Pressure (psi): 300
- Minimum Air Inlet Pressure (bar): 3.4
- Minimum Air Inlet Pressure (MPa): 0.34
- Minimum Air Inlet Pressure (psi): 50
- Needle Tip Material: PEEK
- Nozzle Size (in): 0.042
- Nozzle Size (mm): 1.10
- Overall Height (in): 1.9
- Overall Height (mm): 48.3
- Overall Length (in): 5.9
- Overall Length (mm): 150
- Overall Width (in): 1.63
- Overall Width (mm): 41.4
$1,260.00
Stellair Automatic Air Spray Gun, Conventional, 0.042 in (1.1 mm) Nozzle
GG 25F209
GG 25F209
Stellair Automatic Air Spray Gun, Conventional, 0.042 in (1.1 mm) Nozzle
$1,260.00
GUN, AUTO, HVLP .055, MANIFOLD, ADJ
GG 25F215
GG 25F215
GUN, AUTO, HVLP .055, MANIFOLD, ADJ
Stellair Automatic Air Spray Gun, HVLP, 0.055 in (1.4 mm) Nozzle for General Industry with fluid control knob, with side inlet manifold (imperial) High volume low pressure (HVLP) air spray gun produces stellar results on an automated paint line or in a robotic spray booth. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Precise fluid flow control click knob with true zero set point ensures accurate paint thickness. Two-screw manifold to gun connection makes installation easy. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
$1,620.00
GUN, AUTO, HVLP .055, MANIFOLD
GG 25F214
GG 25F214
GUN, AUTO, HVLP .055, MANIFOLD
Stellair Automatic Air Spray Gun, HVLP, 0.055 in (1.4 mm) Nozzle for General Industry with side inlet manifold (imperial) High volume low pressure (HVLP) air spray gun produces stellar results on an automated paint line or in a robotic spray booth. Automatic air spray gun brings all-star performance to many industrial finishing applications, including automotive, industrial metal and plastic components, wood products and architectural structures. High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations. General industry air caps and nozzles produce a uniform, high quality spray pattern with low atomizing pressure. Two-screw manifold to gun connection makes installation easy. Patented spray pattern alignment and pathing tool ensures accurate and repeatable spray angle. It is easily attached and detached from the gun to keep production moving. One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime. Direct stainless steel fluid path cuts the amount of solvent needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$1,530.00
LINELAZER SPRAYER, V, 3400
GG 25M224
GG 25M224
LINELAZER SPRAYER, V, 3400
Graco 25M224 LineLazer 3400 Gas Airless Line Striper, 1 Manual Gun
The LineLazer 3400 is the professional choice for dependable, 1-gun striping for small parking lots, mini malls, seal coating contractors, schools and park and recreation departments.
- Updated Frame
Improved Tracking & Line Quality
Added stability with newly designed, 3-inch longer frame
Accepts 15-gallon hopper and EZ Bead System
- Rear Mount Hose Wrap
Easier Stencil Jobs
Easy on/off functionality
- Easy-To-Reach Controls
Fine-tune the striper without stopping
Operator controls are located on the handlebars
- Electronic Pressure Control
Improved Line Quality
Accurate, tight tolerance system
- Endurance Chromex Pump
Reliable, Long-Life Pump
Industry-best pump performance — field-proven design
Handle the most demanding materials with long-life rod treatment
4X harder than ordinary chrome
- Honda GX Engine
Reliable, Easy-to-Start Power
Contractor-preferred — excellent power and proven reliability
Oil Alert shuts down engine to prevent damage if oil level drops too low
- Easy Out Pump Filter
Easy Pump Maintenance & Less Clogging
Inside-out design means less mess with fewer tip clogs
- Front Swivel Wheel
Easier Maneuverability
Ability to stripe right up to the curb
Makes easy work of hard-to-do curves
Years of dependable operation with tapered locking pin design
- Model: LineLazer
- Series: 3400
- Product Series: Standard
- Attachments: None
- Compatible Material: Road-Marking Paint
- Compatible Surfaces: Pavement, Turf
- Engine Brand: Honda
- Engine Model: GX120
- Fuel Tank Capacity (gal): 0.66
- Fuel Tank Capacity (L): 2.5
- Gun Activation: 1 Manual
- Hopper Volume Capacity (gal): 15
- Hopper Volume Capacity (L): 56.8
- Includes: Flex Plus Gun, LineLazer RAC 5 317 Spray Tip, LineLazer RAC 5 319 Spray Tip, RAC 5 Tip Guard, 1/4 in x 50 ft (15 m) BlueMax II Airless Hose, 1/4 in x 3 ft (0.9 m) BlueMax II Airless Whip Hose, TSL, 4 oz (118 ml)
- Maximum Flow Rate (GPM): 0.75
- Maximum Flow Rate (L/min): 2.8
- Maximum Sound Pressure Level (dB(A)): 91
- Maximum Tip Size (cm): 0.0686
- Maximum Tip Size (in): 0.027
- Maximum Tip Size (mm): <
$9,360.00
PULSE PRO METER VALVE, FMS, 1/2 NPT, RIGID, OIL, HF
GG 25M323
GG 25M323
PULSE PRO METER VALVE, FMS, 1/2 NPT, RIGID, OIL, HF
Pulse® Metered Dispense Valve for Oil Applications - 1/2 in NPT, Rigid Extension, High Flow NozzleGraco dispense meters designed for our Pulse® fluid management system are durable and easy to use. Everything you need is at your fingertips. Enter PINs and other data using the intuitive display.
Track and record inventory levels with electronic metering
Increase technician productivity
Flexible—one meter can handle all fluids
Reliable—time-tested Graco engineering
Large, Intuitive Display—high-contrast display for low and bright light conditions
Protective trigger guard—prevents accidental dispenses
Four finger trigger with lock-on feature
No need to leave bay or use computer to complete dispense
Long battery life—uses 4 AA easy-to-replace batteries
$2,320.00
SD SERIES SDM8 VALVE, 1/2NPT, RIGID, OIL
GG 25M404
GG 25M404
SD SERIES SDM8 VALVE, 1/2NPT, RIGID, OIL
Graco 25M404 SDM8 Series Electronic Manual Oil Meter - Rigid Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
- Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDM8
- Compatible Material: Oil, ATF
- Dispense Type: Manual
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Rigid Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Oil Automatic Quick-Close
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Recommended Environment: Indoor
$1,000.00
SD SERIES SDM8 VALVE, 1/2NPT, RIGID, AF
GG 25M405
GG 25M405
SD SERIES SDM8 VALVE, 1/2NPT, RIGID, AF
Graco 25M405 SDM8 Series Electronic Manual Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
- Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDM8
- Compatible Material: Oil, Antifreeze, ATF, Gear Oil
- Dispense Type: Manual
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Rigid Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Manual
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Recommended Environment: Indoor
$1,030.00
SD SERIES SDM8 VALVE, 1/2NPT, FLEX, OIL
GG 25M406
GG 25M406
SD SERIES SDM8 VALVE, 1/2NPT, FLEX, OIL
Graco 25M406 SDM8 Series Electronic Manual Oil Meter - Flexible Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
- Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDM8
- Compatible Material: Oil, ATF
- Dispense Type: Manual
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Flexible Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Oil Automatic Quick-Close
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Recommended Environment: Indoor
$1,000.00
SD SERIES SDM18 VALVE, 1/2NPT, RIGD, OIL, HF
GG 25M410
GG 25M410
SD SERIES SDM18 VALVE, 1/2NPT, RIGD, OIL, HF
Graco 25M410 SDM18 Series Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
- Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDM18
- Compatible Material: Oil, Antifreeze, ATF, Gear Oil
- Dispense Type: Manual
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Rigid Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 18
- Maximum Flow Rate (L/min): 68
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Manual
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Recommended Environment: Indoor
$1,110.00
SD SERIES SDM8 VALVE, 1/2NPT, GL
GG 25M413
GG 25M413
SD SERIES SDM8 VALVE, 1/2NPT, GL
Graco 25M413 SDM8 Series Electronic Manual Gear Lube Meter - Rigid Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
- Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDM8
- Compatible Material: Gear Oil, Oil, ATF
- Dispense Type: Manual
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Gear Lube Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Manual
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Recommended Environment: Indoor
$1,030.00
FUSION PC GUN, RND, 02
GG 25P589
GG 25P589
FUSION PC GUN, RND, 02
Graco 25P589 Fusion ProConnect Gun with Round 02 Mix Chamber and 0.052 in (1.3 mm) Orifice Size
A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.
Application: Unlike any other spray foam gun available- A single cartridge replaces the entire fluid section in seconds
- Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
- Integrated check valves for cross-over containment
- Eliminates the need to purchase fluid section o-rings
- Spare ProConnect cartridges can replace your back-up guns
- Retrofit Kit available to convert existing Fusion AP guns
- Model: Fusion PC
- Series: Round
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.42875
- Component B Inlet Size (in): 9/16-18
- Component B Inlet Size (mm): 14.2875
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): .052
- Fluid Orifice Size (mm): 1.07
- For Use With: Non-Flammable Foam and Polyurea
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air Purge Gun
- Gun Weight (g): 1338
- Gun Weight (kg): 1.3
- Gun Weight (lb): 2.95
- Gun Weight (oz): 47
- Impingement Port Size (in): 0.052
- Impingement Port Size (mm): 1.32
- Includes: PC52RD Mix Chamber Tip
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 245
- Maximum Fluid Working Pressure (MPa): 24.5 <
$3,870.00
KIT, FUSION PC, RETRO, BARE
GG 25P704
GG 25P704
KIT, FUSION PC, RETRO, BARE
Fusion ProConnect Retrofit Kit without Mix Chamber Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and can be combined with any Fusion PC mix chamber (sold separately). Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold. Same Fusion AP gun, all new possibilities A single cartridge replaces the entire fluid section in seconds Sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns
$1,275.00
KIT, AIR MOTOR BEARING, REBUILD
GG 25P720
GG 25P720
KIT, AIR MOTOR BEARING, REBUILD
Radial Piston Air Motor Bearing Rebuild Kit
$183.50
KIT, FUSION PC, RETRO, RND, 01
GG 25P701
GG 25P701
KIT, FUSION PC, RETRO, RND, 01
Fusion ProConnect Retrofit Kit with Round 01 Mix Chamber and 0.042 in (1.06 mm) Orifice Size Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold. Same Fusion AP gun, all new possibilities A single cartridge replaces the entire fluid section in seconds Sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns
$1,615.00
5/10 Gallon Pail Agitator Shaft Coupler 1/2"-3/8"
GG 25P709
GG 25P709
5/10 Gallon Pail Agitator Shaft Coupler 1/2"-3/8"
Call for pricing
KIT, AIR MOTOR PISTON, REBUILD
GG 25P721
GG 25P721
KIT, AIR MOTOR PISTON, REBUILD
Radial Piston Air Motor Piston Rebuild Kit
$267.00
REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 10FT
GG 25P770
GG 25P770
REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 10FT
10 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2 The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun. For use with Reactor 2 internally heated hose. Light Weight Design- 20% lighter weight than traditional whip hose
$1,205.00
REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 20FT
GG 25P771
GG 25P771
REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 20FT
Graco 25P771 20 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2
The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun.
Application: For use with Reactor 2 internally heated hose.- Light Weight Design
20% lighter weight than traditional whip hose
- Stainless Steel Braiding
- High Temperature Hose Core and Silicone Wire Protection
- Includes reliable Xtreme Wrap scuff guard
- Model: Reactor 1
- Series: Xtreme Wrap
- Compatible Sprayer: Reactor 1 & 2
- Connection Type: Male x Female
- Hose Diameter (in): 1/4"
- Hose Diameter (mm): 6.35
- Hose Heating Type: External Heated
- Hose Length (ft): 20
- Hose Length (m): 6
- Inside Diameter (in): 1/4
- Material: PTFE
- Maximum Temperature (°C): 82
- Maximum Temperature (°F): 180
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (MPa): 13.8
- Maximum Working Pressure (psi): 2000
$1,760.00
Reactor Heated Hose, Whip, 1/4ID, 3500PSI, 10ft
GG 25P772
GG 25P772
Reactor Heated Hose, Whip, 1/4ID, 3500PSI, 10ft
Graco 25P772 10 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2
Graco’s Improved Flex heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- Improved Flex design, making it easier to spray in tight areas
- 20% Lighter than previous whip hose
- Includes 18&Prime, of insulated, non-heated section near gun
- Includes reliable Xtreme Wrap scuff guard
- Model: Reactor 1
- Series: Xtreme Wrap
- Compatible Sprayer: Reactor 1 & 2
- Connection Type: Male x Female
- Hose Diameter (in): 1/4"
- Hose Diameter (mm): 6.35
- Hose Heating Type: External Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.25
- Material: PTFE
- Maximum Temperature (°C): 82
- Maximum Temperature (°F): 180
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
$1,535.00
KIT, VALVE, FLAPPER, 4"
GG 25P086
GG 25P086
KIT, VALVE, FLAPPER, 4"
4-inch 316 SST Flapper Valve Check Kit
$777.00
REACTOR HEATED HOSE, WHIP, 1/4ID, 3500PSI, 20FT
GG 25P773
GG 25P773
REACTOR HEATED HOSE, WHIP, 1/4ID, 3500PSI, 20FT
Graco 25P773 20 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2
Graco’s Improved Flex heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- Improved Flex design, making it easier to spray in tight areas
- 20% Lighter than previous whip hose
- Includes 18&Prime, of insulated, non-heated section near gun
- Includes reliable Xtreme Wrap scuff guard
- Model: Reactor 1
- Series: Xtreme Wrap
- Compatible Sprayer: Reactor 1 & 2
- Connection Type: Male x Female
- Hose Diameter (in): 1/4"
- Hose Diameter (mm): 6.35
- Hose Heating Type: External Heated
- Hose Length (ft): 20
- Hose Length (m): 6
- Inside Diameter (in): 0.25
- Material: PTFE
- Maximum Temperature (°C): 82
- Maximum Temperature (°F): 180
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
$2,020.00
KIT, AIR MOTOR ENDCAP, REBUILD
GG 25P860
GG 25P860
KIT, AIR MOTOR ENDCAP, REBUILD
Radial Piston Air Motor End Cap
$108.50
KIT, FUSION PC, RETRO, RND, 00-01
GG 25R087
GG 25R087
KIT, FUSION PC, RETRO, RND, 00-01
Graco 25R087 Fusion ProConnect Retrofit Kit with Round 00-01 Mix Chamber and 0.037 in (0.94 mm) Orifice Size
Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold.
Application: Same Fusion AP gun, all new possibilities- A single cartridge replaces the entire fluid section in seconds
- Sprays exactly like a Fusion AP
- Integrated check valves for cross-over containment
- Eliminates the need to purchase fluid section o-rings
- Spare ProConnect cartridges can replace your back-up guns
- Model: Fusion PC
- Series: Round
- Includes: PC37RD Mix Chamber Tip
- Mix Chamber: 00-01 (.037)
$1,615.00
KIT, SDU, SEAL INFL FDA NEO
GG 25P317
GG 25P317
KIT, SDU, SEAL INFL FDA NEO
Inflatable Drum Plate Replacement Seal Kit, Neoprene
$2,290.00
FUSION PC GUN, RND, 00-01
GG 25R084
GG 25R084
FUSION PC GUN, RND, 00-01
Graco 25R084 Fusion ProConnect Gun with Round 00-01 Mix Chamber and 0.037 in (0.94 mm) Orifice Size
A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.
Application: Unlike any other spray foam gun available- A single cartridge replaces the entire fluid section in seconds
- Built on top of the time-tested Fusion AP platform, the PC gun sprays exactly like a Fusion AP
- Integrated check valves for cross-over containment
- Eliminates the need to purchase fluid section o-rings
- Spare ProConnect cartridges can replace your back-up guns
- Retrofit Kit available to convert existing Fusion AP guns
- Model: Fusion PC
- Series: Round
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.42875
- Component B Inlet Size (in): 9/16-18
- Component B Inlet Size (mm): 14.2875
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): .037
- Fluid Orifice Size (mm): 1.07
- For Use With: Non-Flammable Foam and Polyurea
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air Purge Gun
- Gun Weight (g): 1338
- Gun Weight (kg): 1.3
- Gun Weight (lb): 2.95
- Gun Weight (oz): 47
- Impingement Port Size (in): 0.037
- Impingement Port Size (mm): 0.94
- Includes: PC37RD Mix Chamber Tip
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 245
- Maximum Fluid Working Pressure (MPa): 24.5 <
$3,870.00
Fusion ProConnect Gun with Route 03 Mix Chamber
GG 25R085
GG 25R085
Fusion ProConnect Gun with Route 03 Mix Chamber
$3,870.00
KIT, FUSION PC, RETRO, FL, 00, 438
GG 25R089
GG 25R089
KIT, FUSION PC, RETRO, FL, 00, 438
Graco 25R089 Fusion ProConnect Retrofit Kit with Flat 00 Mix Chamber and 0.029 in (0.74 mm) Orifice Size
Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold.
Application: Same Fusion AP gun, all new possibilities- A single cartridge replaces the entire fluid section in seconds
- Sprays exactly like a Fusion AP
- Integrated check valves for cross-over containment
- Eliminates the need to purchase fluid section o-rings
- Spare ProConnect cartridges can replace your back-up guns
- Model: Fusion PC
- Series: Flat
- Includes: PC29RD Mix Chamber Tip
- Mix Chamber: 00 (.029)
$1,615.00
KIT, FUSION PC, RETRO, RND, 03
GG 25R088
GG 25R088
KIT, FUSION PC, RETRO, RND, 03
Fusion ProConnect Retrofit Kit Round 03 Mix Chamber and 0.060 in (1.5 mm) Orifice Size Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold. Same Fusion AP gun, all new possibilities A single cartridge replaces the entire fluid section in seconds Sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns
$1,615.00
REGULATOR, BP, AIRPILOT, HIGH-FLOW
GG 25R457
GG 25R457
REGULATOR, BP, AIRPILOT, HIGH-FLOW
Graco 25R457 Low Shear Fluid Back Pressure Regulator, 300 Max psi, 25 gpm Max flow rate, SST, Pneumatic, high wear, sanitary inlet/outlet
Graco’s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.
- Air operated model works with Intelligent Paint Kitchen (IPK) control to reduce energy consumption and paint shear
- Ultralife series ceramic coated parts resist wear and increase service life
- Low profile, compact design and backwards compatibility mean easy installation and replacement
- Compatible Material: Waterborne, Solvent borne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Inlet Size (cm): 3.8
- Inlet Size (in): 1.5
- Inlet Size (mm): 38
- Inlet Thread Type: Sanitary Flange
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kg/cm²): 7
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 25
- Maximum Flow Rate (L/min): 95
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Maximum Regulated Pressure (bar): 17.6
- Maximum Regulated Pressure (kg/cm²): 17.6
- Maximum Regulated Pressure (kPa): 1724
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21.1
- Maximum Working Pressure (kg/cm²): 21.1
- Maximum Working Pressure (kPa): 2068
- Maximum Working Pressure (psi): 300
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Regulated Pressure (bar): 1.8
- Minimum Regulated Pressure (kg/cm²): 1.8
- Minimum Regulated Pressure (kPa): 172
- Minimum Regulated Pressure (MPa): 0.17
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.8
- Outlet Size (in): 1.5
- Outlet Size (mm): 38
- Outlet Thread Type: Sanitary Flange
$3,430.00
REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, PC
GG FPH062
GG FPH062
REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, PC
Graco FPH062 Reactor 2 H-XP2 Proportioner Package, Fusion PC Gun, Heated Hose, 15 kW, 230/400V
Graco&prime, s hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.
Application: For coatings that require high-pressures - applies up to 1.5 gal (5.7 liters) per minute. Graco&prime, s line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.- What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
- Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
- Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
- Sacrificial surge protector
Protects your electronics against excessive power spikes
- Three-year warranty
Covers user display and control modules
One of the best in the industry
- Model: Reactor 2
- Series: H-XP2
- Product Series: Non-Elite
- Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
- Application: Protective Coatings
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Type: Fusion PC
- Hose Length (ft): 50, 10
- Hose Length (m): 15, 3
- Hose Package: Single Hose
- Includes: Fusion PC Gun, Heated Hose, Whip Hose
- Material Application: Polyurea
- Maximum Flow Rate (cc/min): 5680
- Maximum Flow Rate (GPM): 2
- Maximum Flow Rate (L/min): 5.7
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Mix Ratio: 1:1
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Worki
$54,320.00
REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, PC
GG FPH162
GG FPH162
REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, PC
Graco FPH162 Reactor 2 H-XP2 Elite Proportioner Package, Fusion PC Gun, Heated Hose, 15 kW, 230/400V
Graco&prime, s hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.
Application: For coatings that require high-pressures - applies up to 1.5 gal (5.7 liters) per minute. Graco&prime, s line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.- What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
- Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
- Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
- Sacrificial surge protector
Protects your electronics against excessive power spikes
- Three-year warranty
Covers user display and control modules
One of the best in the industry
- Elite Models
Graco InSite included
Inlet pressure and temperature sensors (interfaces with Graco InSite)
Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package
- Model: Reactor 2
- Series: H-XP2
- Product Series: Elite
- Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
- Application: Protective Coatings
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Type: Fusion PC
- Hose Length (ft): 50, 10
- Hose Length (m): 15, 3
- Hose Package: Single Hose
- Includes: Fusion PC Gun, Heated Hose with Xtreme-Wrap, Heated Hose, Elite Kit
- Material Application: Polyurea
- Maximum Flow Rate (cc/min): 5680
- Maximum Flow Rate (GPM): 2
- Maximum Flow Rate (L/min): 5.7
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maxi
$57,320.00
REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC
GG FHH174
GG FHH174
REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC
Graco FHH174 Reactor 2 H-XP3 Elite Proportioner Package, Fusion PC Gun, (6) Heated Hoses with Scuff Guard, 20 kW, 230 V, 3PH
Graco&prime, s hydraulic Reactor H-XP3 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.
Application: For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute.- What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
- Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
- Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
- Sacrificial surge protector
Protects your electronics against excessive power spikes
- Three-year warranty
Covers user display and control modules
One of the best in the industry
- Elite Models
Graco InSite included
Inlet pressure and temperature sensors (interfaces with Graco InSite)
Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package
Drum level indicators
- Model: Reactor 2
- Series: H-XP3
- Product Series: Elite
- Amperage (A): 95 @ 200 to 240 V ac (3-Phase Delta)
- Application: Protective Coatings
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Type: Fusion PC
- Hose Length (ft): 50, 10
- Hose Length (m): 15.2, 3
- Hose Package: Multi-Hose
- Includes: Proportioner, Fusion PC Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors
- Material Application: Polyurea
- Maximum Flow Rate (cc/min): 9080
- Maximum Flow Rate (GPM): 2.4
- Maximum Flow Rate (L/min): 9.08
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Mix Ratio:
- Sacrificial surge protector
$80,320.00
REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC
GG FPH174
GG FPH174
REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC
Graco FPH174 Reactor 2 H-XP3 Elite Proportioner Package, Fusion PC Gun, Heated Hose with Scuff Guard, 20 kW, 230 V, 3PH
Graco&prime, s hydraulic Reactor H-XP3 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.
Application: For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute.- What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
- Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
- Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
- Sacrificial surge protector
Protects your electronics against excessive power spikes
- Three-year warranty
Covers user display and control modules
One of the best in the industry
- Elite Models
Graco InSite included
Inlet pressure and temperature sensors (interfaces with Graco InSite)
Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package
Drum level indicators
- Model: Reactor 2
- Series: H-XP3
- Product Series: Elite
- Amperage (A): 95 @ 200 to 240 V ac (3-Phase Delta)
- Application: Protective Coatings
- Applicator Type: Manual
- Compatible Material: Plural Components
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Type: Fusion PC
- Hose Length (ft): 50, 10
- Hose Length (m): 15, 3
- Hose Package: Single Hose
- Includes: Proportioner, Fusion PC Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors
- Material Application: Polyurea
- Maximum Flow Rate (cc/min): 9080
- Maximum Flow Rate (GPM): 2.4
- Maximum Flow Rate (L/min): 9.08
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Fluid Temperature (°C): 88
- Maximum Fluid Temperature (°F): 190
- Maximum Mix Ratio: 1
- Sacrificial surge protector
$60,680.00
RAC X FFLP TIP, SPRAY, (412)
GG FFLP412
GG FFLP412
RAC X FFLP TIP, SPRAY, (412)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 412 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 412 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces an 8 to 10 inch Fan pattern and has a 0.012 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$82.00
MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD
GG G05B09
GG G05B09
MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD
Merkur Bellows 5:1 Ratio Pump Package with U-Cup Seal, Wall Mount, Fluid Filter Graco’s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials. Highest technology air motor on the market Low air consumption for increased efficiency Simple air motor design and minimal parts reduces repair time Easy-to-flush design allows for fast color changes and reduced material waste 300 series stainless steel pump construction provides long-lasting durability
$11,730.00
MERKUR BELLOWS SYSTEM, PUMP, 150CC, SMT
GG G05B02
GG G05B02
MERKUR BELLOWS SYSTEM, PUMP, 150CC, SMT
Merkur Bellows 5:1 Ratio Pump Package with V-Packing Seal, Wall Mount, Fluid Filter, DataTrak Graco’s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials. Highest technology air motor on the market Low air consumption for increased efficiency Simple air motor design and minimal parts reduces repair time Easy-to-flush design allows for fast color changes and reduced material waste 300 series stainless steel pump construction provides long-lasting durability
$12,520.00
MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD
GG G03W15
GG G03W15
MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD
Graco G03W15 3:1 Merkur Air Spray Package, 125cc, Wall, No Applicator
Make the right choice for your finishing applications with Merkur Low Pressure Packages. The Merkur low-pressure piston pump comes with advanced air spray technology.
- Wall mount configuration offers easy access to data monitoring and controls.
- The air motor operates efficiently with low air consumption.
- The pump lower has the best solution for smooth, low pulsation operation.
- Model: Merkur
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 1.27
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 12.7
- Fluid Outlet Thread Type: NPT
- Gun Included: 0
- Gun Model: No Applicator
- Gun Technology: Bare Package
- Gun Type: No Applicator
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (GPM): 2
- Maximum Flow Rate (L/min): 7.5
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 8.3
- Maximum Working Pressure (MPa): 0.8
- Maximum Working Pressure (psi): 120
- Mount Type: Wall Mount
- Power Source: Air
- Pressure Type: Low Pressure
- Product Type: Bare Package
- Pump Ratio: 3:1
- Pump Type: Pneumatic Piston Pump
$6,100.00
RAC X FFLP TIP, SPRAY, (310)
GG FFLP310
GG FFLP310
RAC X FFLP TIP, SPRAY, (310)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 310 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 310 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 inch Fan pattern and has a 0.010 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$82.00
MERKUR SYSTEM, PUMP, 10:1, 75CC, CART, STD
GG G10C09
GG G10C09
MERKUR SYSTEM, PUMP, 10:1, 75CC, CART, STD
10:1 Merkur AA Package, 1.2 gpm (4.5 lpm) fluid flow, Cart Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Fluid Filter Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime
$8,640.00
MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD
GG G03W03
GG G03W03
MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD
Graco G03W03 3:1 Merkur Air Spray Package, 125cc, Wall, Pump/Gun Air Controls, Siphon Kit, Fluid Filter, No Applicator
Make the right choice for your finishing applications with Merkur Low Pressure Packages. The Merkur low-pressure piston pump comes with advanced air spray technology.
- The pump lower has the best solution for smooth, low pulsation operation.
- The air motor operates efficiently with low air consumption.
- Wall mount configuration offers easy access to data monitoring and controls.
- Model: Merkur
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 1.27
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 12.7
- Fluid Outlet Thread Type: NPT
- Gun Included: 0
- Gun Model: No Applicator
- Gun Technology: Bare Package
- Gun Type: No Applicator
- Includes: Pump and Gun Air Controls, Siphon Kit, Fluid Filter
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (GPM): 2
- Maximum Flow Rate (L/min): 7.5
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 8.3
- Maximum Working Pressure (MPa): 0.8
- Maximum Working Pressure (psi): 120
- Mount Type: Wall Mount
- Power Source: Air
- Pressure Type: Low Pressure
- Product Type: Bare Package
- Pump Ratio: 3:1
- Pump Type: Pneumatic Piston Pump
$8,060.00
MERKUR SYSTEM, PUMP, 10:1, 75CC, CART, STD
GG G10C03
GG G10C03
MERKUR SYSTEM, PUMP, 10:1, 75CC, CART, STD
Graco G10C03 10:1 Merkur Pump, 1.2 gpm (4.5 lpm) fluid flow, Cart Mount, Pump/Gun Air Controls, Suction Hose
Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Model: Merkur
- Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.9525
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 9.525
- Fluid Outlet Thread Type: NPT
- Gun Included: 0
- Gun Model: No Applicator
- Gun Technology: Bare Package
- Gun Type: No Applicator
- Hose Inlet Diameter (cm): 0.476
- Hose Inlet Diameter (in): 3/16
- Hose Inlet Diameter (mm): 4.76
- Includes: Pump and Gun Air Controls, Suction Hose
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 1.2
- Maximum Flow Rate (L/min): 4.5
- Maximum Working Pressure (bar): 69
- Maximum Working Pressure (kPa): 6900
- Maximum Working Pressure (psi): 1000
- Mount Type: Cart Mount
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Bare Package
- Pump Ratio: 10:1
- Pump Type: Pneumatic Piston Pump
$6,260.00
10:1 Merkur Pump, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount, Pump/Gun Air Controls, Suction Hose
GG G10W03
GG G10W03
MERKUR SYSTEM PUMP 10:01 75CC WA STD
Graco G10W03 10:1 Merkur Pump, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount, Pump/Gun Air Controls, Suction Hose
Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Model: Merkur
- Compatible Material: Waterborne, Solventborne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.9525
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 9.525
- Fluid Outlet Thread Type: NPT
- Gun Included: 0
- Gun Model: No Applicator
- Gun Technology: Bare Package
- Gun Type: No Applicator
- Hose Inlet Diameter (cm): 0.476
- Hose Inlet Diameter (in): 3/16
- Hose Inlet Diameter (mm): 4.76
- Includes: Pump and Gun Air Controls, Suction Hose
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 1.2
- Maximum Flow Rate (L/min): 4.5
- Maximum Working Pressure (bar): 69
- Maximum Working Pressure (kPa): 6900
- Maximum Working Pressure (psi): 1000
- Mount Type: Wall Mount
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Bare Package
- Pump Ratio: 10:1
- Pump Type: Pneumatic Piston Pump
$5,630.00
MERKUR BELLOWS SYSTEM, PUMP, 50CC, STD
GG G15B01
GG G15B01
MERKUR BELLOWS SYSTEM, PUMP, 50CC, STD
Merkur Bellows 15:1 Ratio Pump Package with V-Packing Seal, Wall Mount, Fluid Filter Graco’s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials. Highest technology air motor on the market Low air consumption for increased efficiency Simple air motor design and minimal parts reduces repair time Easy-to-flush design allows for fast color changes and reduced material waste 300 series stainless steel pump construction provides long-lasting durability
$8,400.00
MERKUR SYSTEM PUMP 10:01 75CC WALL STD
GG G10W05
GG G10W05
MERKUR SYSTEM PUMP 10:01 75CC WALL STD
Graco G10W05 10:1 Merkur AA Package, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Suction Hose
Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Model: Merkur
- Convertible: Non-Convertible
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.9525
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 9.525
- Fluid Outlet Thread Type: NPT
- Gun Included: 1
- Gun Model: PerformAA 15 Air Assist
- Gun Technology: Air-Assisted
- Gun Type: Air-Assisted
- Hose Inlet Diameter (cm): 0.4763
- Hose Inlet Diameter (in): 0.1875
- Hose Inlet Diameter (mm): 5
- Includes: Pump and Gun Air Controls, Gun Hose, Suction Hose
- Maximum Flow Rate (GPM): 1.2
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Working Pressure (bar): 69
- Maximum Working Pressure (kPa): 6900
- Maximum Working Pressure (MPa): 6.9
- Maximum Working Pressure (psi): 1000
- Motor Type: Pneumatic
- Mount Type: Wall Mount
- Number of Guns: 1
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Spray Package
- Pump Ratio: 10:1
- Pump Type: Pneumatic Piston Pump
$7,300.00
MERKUR SYSTEM PUMP 10:1 75CC WALL STD
GG G10W07
GG G10W07
MERKUR SYSTEM PUMP 10:1 75CC WALL STD
Graco G10W07 10:1 Merkur AA Package, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Filter
Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Model: Merkur
- Convertible: Non-Convertible
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.9525
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 9.525
- Fluid Outlet Thread Type: NPT
- Gun Included: 1
- Gun Model: PerformAA 15 Air Assist
- Gun Technology: Air-Assisted
- Gun Type: Air-Assisted
- Hose Inlet Diameter (cm): 0.4763
- Hose Inlet Diameter (in): 0.1875
- Hose Inlet Diameter (mm): 5
- Includes: Pump and Gun Air Controls, Gun Hose, Suction Hose, Fluid Filter
- Maximum Flow Rate (GPM): 1.2
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Working Pressure (bar): 69
- Maximum Working Pressure (kPa): 6900
- Maximum Working Pressure (MPa): 6.9
- Maximum Working Pressure (psi): 1000
- Motor Type: Pneumatic
- Mount Type: Wall Mount
- Number of Guns: 1
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Spray Package
- Pump Ratio: 10:1
- Pump Type: Pneumatic Piston Pump
$7,120.00
MERKUR BELLOWS SYSTEM, PUMP, 50CC, SMT
GG G15B04
GG G15B04
MERKUR BELLOWS SYSTEM, PUMP, 50CC, SMT
Graco G15B04 Merkur Bellows 15:1 Ratio Air-Assisted Airless Package with V-Packing, Wall Mount, Fluid Filter, Hoses, PerformAA 15 Spray Gun, DataTrak
Graco’s Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials.
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Simple air motor design and minimal parts reduces repair time
- 300 series stainless steel pump construction provides long-lasting durability
- Model: Merkur
- Series: Bellows
- Application: Supply
- Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish, UV Coating
- Convertible: Non-Convertible
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.9525
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 9.525
- Fluid Outlet Thread Type: NPT
- Frame Configuration: Wall
- Gun Included: 1
- Gun Model: G15
- Gun Technology: Air-Assisted
- Gun Type: Air-Assisted
- Includes: Pump and Gun Air Controls, Drain Valves, Fluid Filter, DataTrak, V-Packing
- Maximum Flow Rate (GPM): 0.8
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Motor Type: Pneumatic
- Mount Type: Wall Mount
- Number of Guns: 1
- Outlet Paint Filter: 60 Mesh Stainless Steel Screen
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Spray Package
- Pump Ratio: 15:1
- Pump Type: Pneumatic Piston Pump
$11,140.00
MERKUR BELLOWS SYSTEM, PUMP, 150CC, SMT
GG G15B52
GG G15B52
MERKUR BELLOWS SYSTEM, PUMP, 150CC, SMT
Graco G15B52 Merkur™ Bellows 15:1 Ratio Pump Package with Wall Mount, V-Packing & DataTrak
The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive materials, including UV coatings and waterborne materials.
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Simple air motor design and minimal parts reduces repair time
- 300 series stainless steel pump construction provides long-lasting durability
- Fewer parts and online replacement bellows seal means improved serviceability, lower cost of ownership and reduced downtime
- Model: Merkur
- Series: Bellows
- Application: Supply
- Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish, UV Coating
- Fluid Inlet Size (cm): 2.5400
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4000
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 1.905
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Includes: Pump Only Air Controls, Fluid Filter, DataTrak Monitor
- Material: Stainless Steel
- Maximum Flow Rate (gpm @ 60 cpm): 2.4
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Motor Type: Pneumatic
- Mount Location: Wall Mount
- Number of Pieces: 3
$12,910.00