GRACO INC. S10595

GG 243728

KIT,REPAIR,400(PISTON SEAL)

Graco 243728 Pump Seal Repair Kit 400 Pumps

GG 244038

FIREBALL 300 SYSTEM, DISPENSE, BULK OIL

Fire-Ball® 300 Series 5:1 Oil Bulk Oil Dispensing Pump Package As the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently. Install the Fire-Ball 300 5:1 in high pressure, medium volume oil transfer applications such as automotive dealerships, fast lube centers, and service shops. Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

GG 244148

TANK, LOW PRESSURE, 10 GAL.

Graco 244148 10 Gallon Supply Tank (pot, lid, gasket, plugs, fill port cap, pick-up tube, liner), ASME rated, stainless steel

• ASME rated to ensure it meets factory standards
• High quality stainless steel design is compatible with many materials
• Use in stand-alone spraying, material/catalyst supply, or as a moisture sensitive material reservoir

GG 244161

INLINE GUN

Contractor Gun In-Line Valve Genuine Graco Contractor In-Line Valve Gun. Refer to the parts manual for your sprayer to ensure part compatibility Graco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come.

Can be used with other extended reach tools such as Heavy Duty Extensions and Telescoping Extensions for Pressure Rolling

Provides a straight connection to extensions for the most optimal rolling position

In-handle paint filter and built-in swivel connection for top spraying performance

Ability to rotate 180˚ allows spraying in any position

GG 243687

Kit, Repair

GG 243697

MANIFOLD,HTD,230V

GG 244680

HUSKY SYSTEM, BULK ANTIFREEZE/WWS

Husky 1050 – Single Inlet Bulk Antifreeze and Windshield Solvent Transfer Packages

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover One-Piece Center Section - Eliminates air leaks for more efficient operation Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation Multiple Ports - Increased number of ports for installation flexibility Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability) Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

GG 244682

HUSKY SYSTEM, ANTI-FREEZE, WWS

Husky 716 – Single Inlet Bulk Antifreeze and Windshield Solvent Transfer Packages

The Husky 716 air operated diaphragm pump delivers up to 16 gpm (60.6 lpm) of fluid and features center and end porting options.

Ideal for bulk antifreeze and windshield solvent transfer. Center- and end-porting No mechanical seals which causes fluid leaks or failures Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks 3/4 in (19.05 mm) center- and end-porting No seals to leak or fail Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels Easy-to-service air valve and ball checks

GG 244714

NEEDLE, AA, ASSEMBLY

Graco 244714 Fluid Needle Assembly

GG 244713

TUBE, AA,ASSEMBLY

Graco 244713 Fluid Tube Assembly Pro Air-Assisted Electrostatic Gun

GG 244734

REGULATOR, ASSEMBLY, XL

Air Operated High Pressure Fluid Pressure Regulator with EZ Flush Gauge Port

These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

GG 244740

REGULATOR, MASTIC, 5000 PSI

Graco 244740 Air Operated Mastic Fluid Pressure Regulator

The mastic regulator is ideal for low to high viscosity sealants or adhesives.

Application: These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

• Actuation Type: Air
• Flow Control Type: Regulation
• Gauge Port Size (cm): 1.905
• Gauge Port Size (in): 3/4
• Gauge Port Size (mm): 19.05
• Gauge Port Type: NPT
• Inlet Size (cm): 1.905
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05
• Inlet Thread Type: NPT
• Maximum Regulated Pressure (bar): 310
• Maximum Regulated Pressure (kPa): 31000
• Maximum Regulated Pressure (MPa): 31.0
• Maximum Regulated Pressure (psi): 4500
• Maximum Viscosity (cP): 80000
• Maximum Working Pressure (bar): 344
• Maximum Working Pressure (kPa): 34400
• Maximum Working Pressure (MPa): 34.4
• Maximum Working Pressure (psi): 5000
• Minimum Regulated Pressure (bar): 17
• Minimum Regulated Pressure (kPa): 1700
• Minimum Regulated Pressure (MPa): 1.7
• Minimum Regulated Pressure (psi): 250
• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: NPT