GRACO INC. S10595
GRACO INC. S10595 branded products
GM100 AC Module
GG 25B241
GG 25B241
KIT, GM100 MODULE
Graco 25B241 GM100 AC Module
KIT INCLUDES: MODULE, AC, GM100, INVISIPAC [QTY. 1], SCREW, VALVE [QTY. 2], LUBRICANT, ANTI-SEIZE [QTY. 1]
- Model: InvisiPac
- Series: GM100
- Channels: 4
$691.00
KIT, PROCONTROL 1KE PLUS
GG 25B296
GG 25B296
KIT, PROCONTROL 1KE PLUS
ProControl 1KE Plus Closed Loop Fluid Pressure/Flow & Atomizing Air Control, ADCM, G3000, Regulators, Pressure Transducer, 2 I/P's This ProControl 1KE Plus package includes everything manufacturers need to actively manage one component (1K) fluids, improve spray performance, and increase efficiency. Atomizing air control helps manual or automatic paint spray guns consistently produce a high quality finish. Closed loop control automatically and precisely adjusts fluid pressure or flow rate to maintain optimal spray performance, minimizing waste and maximizing quality. Flow monitor tracks precisely how much material goes through fluid lines, so that you can improve finishing processes and reduce waste. Advanced Display Control Module (ADCM) gives operator instant feedback by showing comprehensive system parameters and material usage on an easy-to-read screen. Full feature fluid management package works with manual paint spray guns or automatic spray applicators.
$21,430.00
IQ TIP SEAL VALVE REPLACEMENT ROD FOR SIZE 60
GG 25B304
GG 25B304
IQ TIP SEAL VALVE REPLACEMENT ROD FOR SIZE 60
$406.00
KIT, FLANGE, SOLOTECH 30, BUNA
GG 25C157
GG 25C157
KIT, FLANGE, SOLOTECH 30, BUNA
Kit, Flange to 1-1/4 Inch NPT Adapter, Buna Gasket
$178.00
SANIFORCE DRUM PUMP, 3A, 47", 115V
GG 25C418
GG 25C418
SANIFORCE DRUM PUMP, 3A, 47", 115V
Graco 25C418 Sanitary Progressive Cavity Drum Pump System with 115 Volt Variable Speed Motor and 47 inch Lower
Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.
- Easy Cleaning and Product Changeover
- Operational Flexibility Throughout Your Facility
- Easy Mobility
- Certified to FDA standards
- Simple design to facilitate easy cleaning and reduce maintenance and downtime
- Flow rates up to 35 GPM (132 LPM) with a smooth output of material
- Easily transferable from container to container and adaptable to drums, totes and kettles
The light weight design allows all operators to move pumps between drums to increase facility output.
- Fluid Outlet Size (cm): 3.81
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Maximum Working Pressure (bar): 3
- Maximum Working Pressure (kPa): 296
- Maximum Working Pressure (psi): 43
With the electric pump operation, you simply plug it in to be ready for transfer in minutes!
- Easy Mobility
With this simple knock down design, cleaning between drums or product changeovers has never been easier!
- Operational Flexibility Throughout Your Facility
$4,560.00
SANIFORCE DRUM PUMP, PC , 39", 115V
GG 25C420
GG 25C420
SANIFORCE DRUM PUMP, PC , 39", 115V
115 VAC Variable Speed Progressive Cavity Drum Pump System with North American Plug Style and 39 inch LowerReduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, minimal moving parts and easy transferability.
Powered by variable speed electric motor Simple design to facilitate easy cleaning and reduce maintenance and downtime Flow rates up to 35 GPM (132 LPM) with a smooth output of material Easily transferable from container to container and adaptable to drums, totes and kettles
$8,020.00
AGITATOR, BACK GEAR, SIPHON
GG 25C451
GG 25C451
AGITATOR, BACK GEAR, SIPHON
Graco 25C451 Electric Back Gear Drum Agitator with drum cover, elevator, siphon, shaft and blades, UL
Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.
Application: For advanced control and energy savings, switch to electric agitators.- Electric agitators are up to 5 times more efficient than pneumatic agitators.
- Speed remains constant, regardless of material level in tank.
- Quiet motor improves work environment with a sound pressure level of less than 75 dBA at 30 rpm.
- For Use With: 55 Gallon (208 Liter) Drum
- Includes: Drum Cover, Elevator, Siphon, Shaft, Blade
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Speed (RPM): 50
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: Electric
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37
$8,360.00
AGITATOR, ASSY, DIRECT DRIVE
GG 25C454
GG 25C454
AGITATOR, ASSY, DIRECT DRIVE
Graco 25C454 7.5 in OD Flange Mount Agitator Motor (3 in 150# ANSI Flange Mounting Holes), UL
Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks.
Application: For advanced control and energy savings, switch to electric agitators.- Electric agitators are up to 5 times more efficient than pneumatic agitators.
- Speed remains constant, regardless of material level in tank.
- Low shear mixing ensures uniform particle dispersion without material degradation.
- For Use With: Drum or Pressure Tank
- Includes: Motor, Flange
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 300
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: Electric
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37
$3,540.00
AGITATOR, ASSY, PRESSURE TANK 5 GAL
GG 25C462
GG 25C462
AGITATOR, ASSY, PRESSURE TANK 5 GAL
Pressure Tank Agitator Assembly, 5 gallon (19 L), UL Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks. For advanced control and energy savings, switch to electric agitators. Electric agitators are up to 5 times more efficient than pneumatic agitators. Speed remains constant, regardless of material level in tank. Low shear mixing ensures uniform particle dispersion without material degradation.
$5,090.00
AGITATOR, ASSY, PRESSURE TANK, 15 GAL
GG 25C471
GG 25C471
AGITATOR, ASSY, PRESSURE TANK, 15 GAL
Pressure Tank Agitator Assembly, 15 gallon (56 L), UL Low shear, electric, direct drive agitator (UL listed) mixes and maintains suspension of industrial coatings stored in fluid tanks. This model includes a shaft and impeller, but no pressure tank. It can replace existing air motor driven pressure tank agitators. For advanced control and energy savings, switch to electric agitators. Electric agitators are up to 5 times more efficient than pneumatic agitators. Speed remains constant, regardless of material level in tank. Low shear mixing ensures uniform particle dispersion without material degradation.
$5,040.00
SANIFORCE DRUM PUMP, CENT , FDA, 39", 115V
GG 25C411
GG 25C411
SANIFORCE DRUM PUMP, CENT , FDA, 39", 115V
115 VAC Variable Speed Centrifugal Drum Pump System with North American Plug Style, and 39 inch LowerReduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.
Easy Cleaning and Product Changeover
- With this simple knock down design, cleaning between drums or product changeovers has never been easier!
Operational Flexibility Throughout Your Facility
- With the electric pump operation, you simply plug it in to be ready for transfer in minutes!
Easy Mobility
- The light weight design allows all operators to move pumps between drums to increase facility output.
$3,660.00
AGITATOR, BACK GEAR, SIPHON
GG 25C486
GG 25C486
AGITATOR, BACK GEAR, SIPHON
Graco 25C486 Electric Back Gear Drum Agitator with siphon, shaft and blades, UL, drum cover and elevator not included
Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.
Application: For advanced control and energy savings, switch to electric agitators.- Drum cover and elevator are not included.
- Speed remains constant, regardless of material level in tank.
- Quiet electric motor improves work environment.
- drum cover and elevator not included
- For Use With: 55 Gallon (208 Liter) Drum
- Includes: Siphon, Shaft, Blade
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Speed (RPM): 50
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: Electric
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37
$6,200.00
TANK, HIGH PRESS, AGIT 5 GAL
GG 25C536
GG 25C536
TANK, HIGH PRESS, AGIT 5 GAL
Graco 25C536 Agitator with pressure tank, 5 gallon (19 L)
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Use less compressed air than most rotary vane air motors.
- Install quickly and operate quietly.
- Maintain easily – air line lubrication not required.
- Control speed with Graco&prime, s Intelligent Paint Kitchen (IPK).
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Includes: 5 Gallon Pressure Tank
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (psi): 100
- Maximum Speed (RPM): 150
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Motor Type: Pneumatic - Radial Piston
$4,320.00
HUSKY PUMP, 2150S-PA01AS5-1SSPTPOPT
GG 25C659
GG 25C659
HUSKY PUMP, 2150S-PA01AS5-1SSPTPOPT
$11,990.00
SST 2in Diaphragm Pump, Center Flange, SST Center, SST/TEF/TEF
GG 25C658
GG 25C658
SST 2in Diaphragm Pump, Center Flange, SST Center, SST/TEF/TEF
$14,960.00
AGITATOR, DIRECT DRIVE, SST
GG 25C528
GG 25C528
AGITATOR, DIRECT DRIVE, SST
Graco 25C528 Stainless Steel Direct Drive, 30/55 gallon (113.5/208 litres), 1 stainless steel 5.5-inch (14 cm) propeller
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Agitator mounts directly to mix tank or drum cover and rotates clockwise
- Dual propeller ensures efficient and thorough mixing
- Easy adjustment knob fine-tunes agitator speed to ideal mixing parameters
- Control speed with Graco&prime, s Intelligent Paint Kitchen (IPK)
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$2,250.00
AGITATOR, HELIX, CS
GG 25C535
GG 25C535
AGITATOR, HELIX, CS
Graco 25C535 Carbon Steel Direct Drive, helix, bung mount
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Recommended agitator rotation: Clockwise
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Maximum allowable process fluid temperature: 158° F (70° C)
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$2,480.00
AGITATOR, AIR, OUTBOARD
GG 25C529
GG 25C529
AGITATOR, AIR, OUTBOARD
Graco 25C529 Carbon Steel Direct Drive, 55 gallon (208 L), side mount, 2 aluminum 5.5-inch (14 cm) propellers
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Recommended agitator rotation: Clockwise
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$2,440.00
AGITATOR, EXPANDING BLADE
GG 25C530
GG 25C530
AGITATOR, EXPANDING BLADE
Graco 25C530 Stainless Steel Direct Drive, 55 gallon (208 L), bung mount, expanding blade
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Recommended agitator rotation: Counter clockwise
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Bung adapter sizes: 1 1/2–11.5 npsm and 2–11.5 npsm
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$1,835.00
AGITATOR, BACK GEAR
GG 25C485
GG 25C485
AGITATOR, BACK GEAR
Graco 25C485 Electric Back Gear Drum Agitator with shaft and blades, UL, drum cover and elevator not included
Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.
Application: For advanced control and energy savings, switch to electric agitators.- Drum cover and elevator are not included.
- Speed remains constant, regardless of material level in tank.
- Quiet electric motor improves work environment.
- drum cover and elevator not included
- For Use With: 55 Gallon (208 Liter) Drum
- Includes: Shaft, Blade
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Speed (RPM): 50
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: Electric
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37
$5,150.00
AGITATOR, SIPHON TWISTORK
GG 25C532
GG 25C532
AGITATOR, SIPHON TWISTORK
Graco 25C532 Twistork Helix Mixer with suction feature - stainless steel, bung mount, belt drive
Rotate agitator clockwise or counter clockwise for optimal mixing.
Application: For wood (top coat, primer) and general finishing applications- Radial piston air driven motor uses less compressed air than most rotary vane air motors.
- Install quickly and operate quietly.
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Model: Twistork
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- For Use With: Closed-head, Bung-type, 55 Gallon (208 Liter) Drum
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$3,710.00
TANK, HIGH PRESS, AGIT 15 GAL
GG 25C538
GG 25C538
TANK, HIGH PRESS, AGIT 15 GAL
Graco 25C538 Agitator with pressure tank, 15 gallon (58 L)
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Use less compressed air than most rotary vane air motors.
- Install quickly and operate quietly.
- Maintain easily – air line lubrication not required.
- Control speed with Graco&prime, s Intelligent Paint Kitchen (IPK).
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Includes: 15 Gallon Pressure Tank
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (psi): 100
- Maximum Speed (RPM): 150
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Motor Type: Pneumatic - Radial Piston
$4,810.00
AGITATOR, BACK GEAR, ATEX
GG 25C487
GG 25C487
AGITATOR, BACK GEAR, ATEX
Graco 25C487 Electric Back Gear Drum Agitator with shaft and blades, ATEX, drum cover and elevator not included
Heavy-duty, electric, back-geared agitator (ATEX) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.
Application: For advanced control and energy savings, switch to electric agitators.- Drum cover and elevator are not included.
- Speed remains constant, regardless of material level in tank.
- Quiet electric motor improves work environment.
- drum cover and elevator not included
- For Use With: 55 Gallon (208 Liter) Drum
- Includes: Shaft, Blade
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Speed (RPM): 50
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Motor Type: Electric
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37
$5,970.00
AGITATOR, HELIX, SST
GG 25C534
GG 25C534
AGITATOR, HELIX, SST
Graco 25C534 Stainless Steel Direct Drive, helix, bung mount
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Recommended agitator rotation: Clockwise
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Maximum allowable process fluid temperature: 158° F (70° C)
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$3,020.00
AGITATOR, HEAVY DUTY, 5 GAL
GG 25C539
GG 25C539
AGITATOR, HEAVY DUTY, 5 GAL
Agitator for a 5 gallon (19 L) tank, pressure tank not included Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications. For wood (top coat, primer) and general finishing applications Use less compressed air than most rotary vane air motors. Install quickly and operate quietly. Maintain easily – air line lubrication not required. Add DataTrak for speed monitoring and over-speed alert. Control speed with Graco's Intelligent Paint Kitchen (IPK). Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
$2,990.00
TANK, HIGH PRESS, AGIT 10 GAL
GG 25C537
GG 25C537
TANK, HIGH PRESS, AGIT 10 GAL
Graco 25C537 Agitator with pressure tank, 10 gallon (28 L)
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Use less compressed air than most rotary vane air motors.
- Install quickly and operate quietly.
- Maintain easily – air line lubrication not required.
- Control speed with Graco&prime, s Intelligent Paint Kitchen (IPK).
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Includes: 10 Gallon Pressure Tank
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (psi): 100
- Maximum Speed (RPM): 150
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Motor Type: Pneumatic - Radial Piston
$4,410.00
AGITATOR, DIRECT DRIVE, CS
GG 25C533
GG 25C533
AGITATOR, DIRECT DRIVE, CS
Graco 25C533 Carbon Steel Direct Drive, 30/55 gallon, 2 aluminum 5.5-inch (14 cm) propellers
Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.
Application: For wood (top coat, primer) and general finishing applications- Agitator mounts directly to mix tank or drum cover and rotates clockwise
- Dual propeller ensures efficient and thorough mixing
- Easy adjustment knob fine-tunes agitator speed to ideal mixing parameters
- Control speed with Graco&prime, s Intelligent Paint Kitchen (IPK)
- Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
$2,120.00
AGITATOR, ASSY, PRES TANK, 15 GAL, ATEX
GG 25C473
GG 25C473
AGITATOR, ASSY, PRES TANK, 15 GAL, ATEX
Pressure Tank Agitator Assembly, 15 gallon (56 L), ATEX Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks. For advanced control and energy savings, switch to electric agitators. Electric agitators are up to 5 times more efficient than pneumatic agitators. Speed remains constant, regardless of material level in tank. Low shear mixing ensures uniform particle dispersion without material degradation.
$5,970.00
SANIFORCE DRUM PUMP, PC RUM BL, FDA, 39, 3PH
GG 25C782
GG 25C782
SANIFORCE DRUM PUMP, PC RUM BL, FDA, 39, 3PH
$9,490.00
KIT, MOTOR, RADIAL PISTON AIR
GG 25C765
GG 25C765
KIT, MOTOR, RADIAL PISTON AIR
Radial Piston Air Motor Kit Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications. For wood (top coat, primer) and general finishing applications Install quickly and operate quietly. Use less compressed air than most rotary vane air motors. Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
$1,365.00
METER, ELECTRONIC, IM20, 3/4 NPT
GG 25C841
GG 25C841
METER, ELECTRONIC, IM20, 3/4 NPT
Graco 25C841 IM20 Med/High Pressure, Med/High Flow In-Line Meter for Petroleum- and Synthetic-Based Oils and Antifreeze
Graco&prime, s IM20 in-line meter is designed to last and is capable of measuring a variety of fluids up to 20 gpm (75.7 lpm) flow rates. The IM20 is backed by our robust warranty and features upgraded electronics and an easy-to-read LCD screen with simple operator controls that measures in quarts, gallons, pints and liters.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Proven in Harsh Conditions - IP69K-rated meter. Electronics are safe from pressure washing and dusty environments.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: IM20
- For Use With: Petroleum-Based Oils, Synthetic-Based Oils, Antifreeze
- Inlet Size (cm): 1.905
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 20
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Minimum Flow Rate (GPM): 0.25
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: NPT
$950.00
LSR SYSTEM, 1:1 EXTRUDER, 5/5GAL
GG 25C861
GG 25C861
LSR SYSTEM, 1:1 EXTRUDER, 5/5GAL
1:1 Extruder, Stainless Steel, for Liquid Silicone RubberEfficient. Precise. Profitable.
A plural component extruder perfect for low-to-medium viscosity paste materials.
Reduces material costs
Saves money by using less clean-up solvent
Provides consistent material quality
$30,580.00
EM SERIES EM8 VALVE, FLEX EXT, 1/2" NPT
GG 25C904
GG 25C904
EM SERIES EM8 VALVE, FLEX EXT, 1/2" NPT
Graco 25C904 EM8 Electronic Manual Oil/Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM8
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 30 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.36
- Metering Gun Weight (lb): 3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in): 3.5
$775.00
EM SERIES EM8 VALVE, RIGID EXT, 1/2" NPT
GG 25C903
GG 25C903
EM SERIES EM8 VALVE, RIGID EXT, 1/2" NPT
Graco 25C903 EM8 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM8
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 30 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.36
- Metering Gun Weight (lb): 3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in): 3.5 <
$775.00
EM SERIES EM8 VALVE, GEAR LUBE, 1/2" NPT
GG 25C905
GG 25C905
EM SERIES EM8 VALVE, GEAR LUBE, 1/2" NPT
Graco 25C905 EM8 Electronic Manual Gear Lube Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Legacy Valve - 1/2 inch (13 mm) inlet, compatible with gear lube.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM8
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 30 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.36
- Metering Gun Weight (lb): 3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in): 3.5
- Overall Wid
$795.00
EM SERIES EM20 VALVE, RIGID EXT, 1/2" NPT
GG 25C916
GG 25C916
EM SERIES EM20 VALVE, RIGID EXT, 1/2" NPT
Graco 25C916 EM20 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM20
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 75708
- Maximum Flow Rate (cc/sec): 1262
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 5.9 Bar at 12 GPM
- Meter Pressure Loss (psi): 85 PSI at 12 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.39
- Metering Gun Weight (lb): 3.1
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 2.2225
- Outlet Size (in): 7/8
- Outlet Size (mm): 22.225
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in):
$1,100.00
EM SERIES EM20 VALVE, RIGID EXT, 3/4" NPT
GG 25C919
GG 25C919
EM SERIES EM20 VALVE, RIGID EXT, 3/4" NPT
Graco 25C919 EM20 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 3/4 in. (19 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
- Legacy Valve - 3/4 inch (19 mm) inlet, compatible with oil and Antifreeze.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM20
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.91
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 75708
- Maximum Flow Rate (cc/sec): 1262
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 5.9 Bar at 12 GPM
- Meter Pressure Loss (psi): 85 PSI at 12 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.39
- Metering Gun Weight (lb): 3.1
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 2.2225
- Outlet Size (in): 7/8
- Outlet Size (mm): 22.225
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in):
$1,100.00
KIT, 10 PACK, ELBOW, 3/16-1/8NPT
GG 25C977
GG 25C977
KIT, 10 PACK, ELBOW, 3/16-1/8NPT
Graco 25C977 Electric Grease Jockey™ System Truck with Greaseable Spring Pins - 3/16 in. to 1/8 in. NPT Elbows, 10-Pack
Application: For use with Electric Grease Jockey System Installation Kits.
- 3/16 in to 1/8 NPT elbows, 10-Pack (qty)
- Application: On-Road Vehicles
- Compatible Material: Grease
- Connection Type: Tube End, Threaded
- For Use With: Tube
- Material: Brass
$40.50
KIT, 10 PACK, 3/16-1/8NPT
GG 25C978
GG 25C978
KIT, 10 PACK, 3/16-1/8NPT
Graco 25C978 Electric Grease Jockey™ System Truck with Greaseable Spring Pins - 3/16 in. to 1/8 in. NPT Straights, 10-Pack
Application: For use with Electric Grease Jockey System Installation Kits.
- 3/16 in to 1/8 NPT straights, 10-Pack
- Application: On-Road Vehicles
- Compatible Material: Grease
- Connection Type: Tube End, Threaded
- For Use With: Tube
- Material: Brass
$32.20
KIT, ELBOW, 15K784, 5 PK
GG 25C979
GG 25C979
KIT, ELBOW, 15K784, 5 PK
Graco 25C979 Electric Grease Jockey™ System Truck with Greaseable Spring Pins - 1/4-28 in. to 1/8 in. NPT Female, 5-Pack
Application: For use with Electric Grease Jockey System Installation Kits.
- 1/4-28 SAE to 1/8 NPT (F), 5-Pack
- Application: On-Road Vehicles
- Compatible Material: Grease
- Connection Type: Threaded
- Finish/Coating: Zinc
- For Use With: Pipe
- Material: Steel
$40.50
KIT, DOUBLING, OUTPUT
GG 25C983
GG 25C983
KIT, DOUBLING, OUTPUT
Electric Grease Jockey™ Pump Output Doubling Kit For use with Electric Grease Jockey Pumps. Output doubling kit
$354.00
KIT, COMPLETE, CS T3, AIR/FLUID
GG 25D295
GG 25D295
KIT, COMPLETE, CS T3, AIR/FLUID
T3 Complete Package: Includes 2 Pumps (Carbon Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer Kit Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required. Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig. More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump. Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switchingis purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanicalreversing mechanism in the air-motor
$4,300.00
KIT, SUPPLY, CS T3, /W PLUMBING
GG 25D296
GG 25D296
KIT, SUPPLY, CS T3, /W PLUMBING
Graco 25D296 T3 Package: Includes 2 Pumps (Carbon Steel) and 2 Supply Hoses
Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.
- Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
- More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
- Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor
- Model: T3
- Series: Carbon Steel
- Material: Carbon Steel
- Package Options: Supply Hose
$3,780.00
Kit, 14 Valve Cc Control
GG 25D482
GG 25D482
KIT,14 VALVE CC CONTROL
Graco 25D482 14 Valve Color Change Solenoid Module Kit
$7,420.00
Kit, 15 Valve Cc Control
GG 25D483
GG 25D483
KIT,15 VALVE CC CONTROL
Graco 25D483 15 Valve Color Change Solenoid Module Kit
$8,050.00
KIT, 18 VALVE CC CONTROL
GG 25D486
GG 25D486
KIT, 18 VALVE CC CONTROL
Graco 25D486 18 Valve Color Change Solenoid Module Kit
$8,430.00
LINELAZER SPRAYER, V, 250SPS, 2 GUN, 2PBS, LSR
GG 25D340
GG 25D340
LINELAZER SPRAYER, V, 250SPS, 2 GUN, 2PBS, LSR
LineLazer V 250SPS HP Reflective Series Self-Propelled Gas Hydraulic Airless Line Striper, 2 Auto Guns, 2 Tanks, LazerGuide 3000 With exclusive automatic paint guns and hydraulic power, the LineLazer V 250SPS HP Reflective Series is a self-propelled system with reflective bead capability designed for large, heavy-duty line striping jobs including parking lots and road jobs. The HP Reflective Series adds superior bead application capability to the HP Automatic Series feature set, which includes automatic line production capability, including skip-lines, as well as real-time job performance data for proof-of-job requirements. Pressurized EZ Bead System- Superior Bead Application Performance
- Ensures proper bead flow and paint penetration
- Dual bead tanks hold up to 120 lbs each
- Automatically Stripe Skip-Lines
- Reduce operator fatigue — push button line production
- Quality solenoid driven system
- Easier, laser-straight lines
- Longer distance accuracy
- Highly-visible laser guise
- Faster, simple operation
- Striping Information At-A-Glance
- Simple to use and easy to see in all conditions
- Less Refilling
- Extended striping time with large capacity hopper
- Reliable, Easy-to-Start Power
- Contractor-preferred — excellent power and proven reliability
- Oil Alert shuts down engine to prevent damage if oil level drops too low
- Fast starting
- Easy Gun Adjustments
- Perfect gun alignment every time with easy-to-use guide mark system
- 2-gun capability with QuikSelect gun selector
- Straighter long lines
- Use up to six guns
- Self-Centering Front Wheel
- Easy Handlebar Adjustment
- Endurance Chromex Pump
- High-Efficiency Hydraulic Motor
- High-Capacity Cooling System
- Easy Out Pump Filter
$54,690.00