GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

MHH VALVE, BALANCING, 1/8-27

GG 563230

MHH VALVE, BALANCING, 1/8-27

Graco 563230 Balancing Valve, 1/8-27

Lubriquip part number 509-510-000
Trabon part number 9510

Adjustable: Adjustable

Compatible Material: Oil
Inlet Size (cm): 0.3175
Inlet Size (in): 1/8
Inlet Size (mm): 3.175
Inlet Thread Type: NPSF
Material: Steel
Maximum Working Pressure (bar): 448
Maximum Working Pressure (kPa): 44800
Maximum Working Pressure (MPa): 44.8
Maximum Working Pressure (psi): 6500
Outlet Size (cm): 0.3175
Outlet Size (in): 1/8
Outlet Size (mm): 3.175
Outlet Thread Type: NPSF
Overall Height (cm): 3.81
Overall Height (in): 1.5
Overall Height (mm): 38.1
Overall Length (cm): 10
Overall Length (in): 3.834
Overall Length (mm): 97
Overall Width (cm): 2.54
Overall Width (in): 1
Overall Width (mm): 25.4

$537.00

INDICATOR, MAN RESET 1500 PS MJ/MSP

GG 563235

INDICATOR, MAN RESET 1500 PS MJ/MSP

Reset Indicator with Memory, 1500 psi (103 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-050

$26.70

INDICATOR, MAN RESET 500 PS MJ/MSP

GG 563232

INDICATOR, MAN RESET 500 PS MJ/MSP

Graco 563232 Reset Indicator with Memory, 500 psi (35 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication
No tools for reset or parts to replace after indication
Easy information on blocked lines, high system pressure or blocked bearings

Model: Trabon

Application: On-Road Vehicles, Off-Road Equipment
Compatible Material: Oil, Grease
Connection Size (in): 0.125
Indicator Type: Reset Indicator with Memory
Maximum Working Pressure (bar): 34
Maximum Working Pressure (kPa): 3400
Maximum Working Pressure (MPa): 3
Maximum Working Pressure (psi): 500

$26.70

INDICATOR, MAN RESET 2500 PS MJ/MSP

GG 563237

INDICATOR, MAN RESET 2500 PS MJ/MSP

Reset Indicator with Memory, 2500 psi (172 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

$26.70

AUTOPLUS GUN, AIRLESS

GG 288554

AUTOPLUS GUN, AIRLESS

Graco 288554 Automatic Airless Gun

Less maintenance and more system uptime

Application: For streaming, spray and extrusion

Durable stainless steel construction, longer life needle and seat construction specifically designed to handle the toughest sealant and adhesive materials
Lightweight and compact rounded gun design
Capable of handling high production speeds
Wide range tip line for a variety of applications
Capable of handling multiple nozzle sizes for any application
Lightweight and compact rounded gun design
Capable of handling high production speeds
Durable stainless steel construction handles the toughest materials
Fewer parts means an overall lower cost of repair
Capable of handling multiple nozzle sizes for any application

Model: AutoPlus

Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
Connection Type: Threaded
Flow Control Type: Control
For Use With: PR70 Refill Kit
Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (MPa): 35
Maximum Working Pressure (psi): 5000
Mount Location: Reciprocating Arm Rod Mount, Stationary Mount
Number of Outputs: 1

$1,635.00

KIT, REPAIR, GUN, SG20/SGPRO/SG2/SG3

GG 288817

KIT, REPAIR, GUN, SG20/SGPRO/SG2/SG3

Gun Repair Kit for SG2, SG3, SG20, and SGPro Guns The Graco gun repair kit will extend the life of your paint spray gun. Spray gun parts will wear with normal use from the abrasives used in coatings. Keep them in peak working order by replacing the worn parts. Repair kit is needed when the spray gun drips when trigger isn't pulled Replacing the worn parts will improve the fan pattern Gun repair kit is for SG2, SG20, SG3, SG Pro spray paint gun models Includes a gun needle, seat valve and nyloc nut

$116.50

Kit, Repair, Air Valve

GG 288858

KIT, REPAIR,AIR VALVE

Graco 288858 Air Valve Repair Kit for Fire-Ball, Monark, and President Air Motors

$144.50

AIRPRO GUN, PRESSURE, AIR SPRAY, .055

GG 288931

AIRPRO GUN, PRESSURE, AIR SPRAY, .055

Graco 288931 AirPro Air Spray Pressure Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Gun Weight (kg): 0.41
Gun Weight (lb): 0.9
Gun Weight (oz): 14.46
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, PRESSURE, HVLP, .020

GG 288935

AIRPRO GUN, PRESSURE, HVLP, .020

Graco 288935 AirPro Air Spray Pressure Feed Gun, HVLP, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Component Type: Two Component
Feed Type: Pressure Feed
Fluid Orifice Size (cm): 0.051
Fluid Orifice Size (in): 0.020
Fluid Orifice Size (mm): 0.5
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Minimum Flow Rate @ PSI (oz/min): 4
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, PRESSURE, COMPLIANT, .020

GG 288942

AIRPRO GUN, PRESSURE, COMPLIANT, .020

Graco 288942 AirPro Air Spray Pressure Feed Gun, Compliant, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.05
Fluid Orifice Size (in): 0.020
Fluid Orifice Size (mm): 0.5
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Minimum Flow Rate @ PSI (oz/min): 4
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, PRESSURE, COMPLIANT, .030

GG 288943

AIRPRO GUN, PRESSURE, COMPLIANT, .030

Graco 288943 AirPro Air Spray Pressure Feed Gun, Compliant, 0.030 inch (0.8 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.08
Fluid Orifice Size (in): 0.030
Fluid Orifice Size (mm): 0.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, SST TIP, AIR SPRAY, .042

GG 288949

AIRPRO GUN, SST TIP, AIR SPRAY, .042

Graco 288949 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, SST Tip, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

Kit, Repair, Gun, Contractor

GG 288488

Kit, Repair, Gun, Contractor

$117.00

AIRPRO GUN, SST TIP, COMPLIANT, .042

GG 288955

AIRPRO GUN, SST TIP, COMPLIANT, .042

Graco 288955 AirPro Air Spray Pressure Feed Gun, Compliant, 0.042 inch (1.1 mm) Nozzle, SST Tip, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Metal
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, WB, AIR SPRAY, .030

GG 288964

AIRPRO GUN, WB, AIR SPRAY, .030

Graco 288964 AirPro Air Spray Pressure Feed Gun, Conventional, 0.030 inch (0.8 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Waterborne
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.08
Fluid Orifice Size (in): 0.030
Fluid Orifice Size (mm): 0.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, WB, HVLP, .042

GG 288968

AIRPRO GUN, WB, HVLP, .042

Graco 288968 AirPro Air Spray Pressure Feed Gun, HVLP, 0.042 inch (1.1 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Waterborne
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, WB, HVLP, .055

GG 288969

AIRPRO GUN, WB, HVLP, .055

Graco 288969 AirPro Air Spray Pressure Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Waterborne
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, WB, COMPLIANT, .042

GG 288971

AIRPRO GUN, WB, COMPLIANT, .042

Graco 288971 AirPro Air Spray Pressure Feed Gun, Compliant, 0.042 inch (1.1 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Waterborne
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, WB, COMPLIANT, .055

GG 288972

AIRPRO GUN, WB, COMPLIANT, .055

Graco 288972 AirPro Air Spray Pressure Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Waterborne
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, CERAMIC, HVLP, .059

GG 288976

AIRPRO GUN, CERAMIC, HVLP, .059

Graco 288976 AirPro Air Spray Pressure Feed Gun, HVLP, 0.059 inch (1.5 mm) Nozzle, for High Wear Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: High Wear
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Ceramics, Enamel, High Solids, Metallics, Solvent borne, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.15
Fluid Orifice Size (in): 0.059
Fluid Orifice Size (mm): 1.5
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

Kit, Gun Tip, .051

GG 288984

Kit, Gun Tip, .051

$55.25

AIRPRO GUN, CONV, .070

GG 289003

AIRPRO GUN, CONV, .070

Graco 289003 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, SPATTER, HVLP, .042

GG 288985

AIRPRO GUN, SPATTER, HVLP, .042

Graco 288985 AirPro Air Spray Pressure Feed Gun, HVLP, 0.042 inch (1.1 mm) Nozzle, Spatter Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Spatter
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Latex, Solvent borne, Spatter, Urethane, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.11
Fluid Orifice Size (in): 0.042
Fluid Orifice Size (mm): 1.1
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, HVLP, .055

GG 289005

AIRPRO GUN, HVLP, .055

Graco 289005 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$775.00

AIRPRO GUN, CONV, .055

GG 289002

AIRPRO GUN, CONV, .055

Graco 289002 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, SIPHON, HVLP, .070

GG 289031

AIRPRO GUN, SIPHON, HVLP, .070

Graco 289031 AirPro Air Spray Siphon Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Siphon Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$966.00

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

GG 289015

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289015 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .055

GG 289026

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .055

Graco 289026 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, SIPHON, COMP, .070

GG 289033

AIRPRO GUN, SIPHON, COMP, .070

Graco 289033 AirPro Air Spray Siphon Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Siphon Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$966.00

HUSKY PUMP, 1050P-PP01AP2SSSSPTPT

GG 649038

HUSKY PUMP, 1050P-PP01AP2SSSSPTPT

Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,490.00

HUSKY PUMP, 1050C-PC01AC1PPPTPOPT

GG 649177

HUSKY PUMP, 1050C-PC01AC1PPPTPOPT

Husky 1050 Conductive PP Pump, Center Flange, Conductive PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$3,340.00

HUSKY PUMP, 1050F-PP01AF1PVPTPOPT

GG 649385

HUSKY PUMP, 1050F-PP01AF1PVPTPOPT

Husky 1050 PVDF Pump, Center Flange, PP Center Section, PVDF Seats, PTFE Balls & PO Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$5,870.00

Husky Pump, 1050P-E, Pp/Sp/Sp/4A

GG 650012

Husky Pump, 1050P-E, Pp/Sp/Sp/4A

$7,610.00

HUSKY PUMP, 1050P-E, SP/SP/SP/4A

GG 650013

HUSKY PUMP, 1050P-E, SP/SP/SP/4A

Husky 1050 PP Pump, Standard AC Motor, End Flange, AL Center Section, SP Seats, SP Balls & SP Diaphragm

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material

Diaphragm Pump

Runs dry
No rotating or moving fluid seals
Self-priming

Electric Drive

Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid

Fluid Section

Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls

Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$7,600.00

HUSKY PUMP, 1050P-E, PP/PT/PS/5B

GG 650110

HUSKY PUMP, 1050P-E, PP/PT/PS/5B

Graco 650110 Husky 1050 PP Pump, 120V Compressor, BLDC Motor, End Flange, AL Center Section, PP Seats, PTFE Balls & PTFE/SP Diaphragm

Durable Pump Technology
- Diaphragm Pump
  - Electric Drive
    - Patent Pending Air Charged Drive
      - Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
      - Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
      Air Inlet Size (in): 3/8
      Air Inlet Thread Gender: Female
      Air Inlet Thread Type: NPT
      Application: Industrial
      Ball Material: PTFE
      Center Section Material: Aluminum
      Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
      Connection Type: End Flange ANSI/DIN
      Diaphragm Compatible Material: PTFE
      Diaphragm Material: PTFE/Santoprene 2-Piece
      Fluid Inlet Size (cm): 2.54
      Fluid Inlet Size (in): 1
      Fluid Inlet Size (mm): 25.4
      Fluid Outlet Size (cm): 2.54
      Fluid Outlet Size (in): 1
      Fluid Outlet Size (mm): 25.4
      Fluid Section Material: Polypropylene
      Manifold Configuration: End Port
      Manifold O-Ring Material: PTFE
      Material: Polypropylene
      Maximum Air Pressure (bar): 5.5
      Maximum Air Pressure (kPa): 550
      Maximum Air Pressure (MPa): 0.55
      Maximum Air Pressure (psi): 80
      Maximum Amperage (A): 5.2
      Maximum Cycle Rate (CPM): 280
      Maximum Flow Rate (GPM): 42
      Maximum Flow Rate (L/min): 159
      Maximum Fluid Pressure (bar): 4.8
      Maximum Fluid Pressure (kPa): 480
      Maximum Fluid Pressure (MPa): 0.48
      Maximum Fluid Pressure (psi): 70
      Maximum Fluid Pressure (bar): 4.8
      Maximum Fluid Pressure (kPa): 4

$10,690.00

HUSKY PUMP, 1050P-E, BN/BN/BN/6A

GG 650307

HUSKY PUMP, 1050P-E, BN/BN/BN/6A

Graco 650307 Husky 1050 PP Pump, 240V Compressor, AC Motor, End Flange, SS Center Section, BN Seats, BN Balls & BN Diaphragm

Durable Pump Technology
- Diaphragm Pump
  - Electric Drive
    - Patent Pending Air Charged Drive
      - Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
      - Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
      Air Inlet Size (in): 3/8
      Air Inlet Thread Gender: Female
      Air Inlet Thread Type: NPT
      Application: Industrial
      Ball Material: Buna-N
      Center Section Material: Stainless Steel
      Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
      Connection Type: End Flange ANSI/DIN
      Diaphragm Compatible Material: Buna
      Diaphragm Material: Buna-N
      Fluid Inlet Size (cm): 2.54
      Fluid Inlet Size (in): 1
      Fluid Inlet Size (mm): 25.4
      Fluid Outlet Size (cm): 2.54
      Fluid Outlet Size (in): 1
      Fluid Outlet Size (mm): 25.4
      Fluid Section Material: Polypropylene
      Manifold Configuration: End Port
      Material: Polypropylene
      Maximum Air Pressure (bar): 5.5
      Maximum Air Pressure (kPa): 550
      Maximum Air Pressure (MPa): 0.55
      Maximum Air Pressure (psi): 80
      Maximum Amperage (A): 5.7
      Maximum Cycle Rate (CPM): 280
      Maximum Flow Rate (GPM): 42
      Maximum Flow Rate (L/min): 159
      Maximum Fluid Pressure (bar): 4.8
      Maximum Fluid Pressure (kPa): 480
      Maximum Fluid Pressure (MPa): 0.48
      Maximum Fluid Pressure (psi): 70
      Maximum Fluid Pressure (bar): 4.8
      Maximum Fluid Pressure (kPa)

$10,670.00

Husky Pump, 1050F-E, S04Df2Pvptpopt

GG 650577

Husky Pump, 1050F-E, S04Df2Pvptpopt

$17,050.00

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

GG 651009

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

Graco 651009 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Ma

$3,840.00

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

GG 651000

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

Graco 651000 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125

$3,960.00

HUSKY PUMP, 1050S-PA01AS1SSPTPOPT

GG 651011

HUSKY PUMP, 1050S-PA01AS1SSPTPOPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PO Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$4,050.00

HUSKY PUMP, 1050S-PA01AS1SSSSPOPT

GG 651005

HUSKY PUMP, 1050S-PA01AS1SSSSPOPT

Graco 651005 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PO Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125

$4,010.00

HUSKY PUMP, 1050S-PA01AS1SPSPSPPT

GG 651015

HUSKY PUMP, 1050S-PA01AS1SPSPSPPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SP Seats, SP Balls & SP Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$3,510.00

HUSKY PUMP, 1050S-PA01AS1FKFKFK

GG 651016

HUSKY PUMP, 1050S-PA01AS1FKFKFK

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, FKM Seats, FKM Balls & FKM Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$4,280.00

HUSKY PUMP, 1050S-PA01AS2SSPTPTPT

GG 651032

HUSKY PUMP, 1050S-PA01AS2SSPTPTPT

Husky 1050 SS 1 in. (25.4 mm) BSPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$4,030.00

HUSKY PUMP, 1050S-PC01AS1SSSSPTPT

GG 651296

HUSKY PUMP, 1050S-PC01AS1SSSSPTPT

Graco 651296 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Conductive Polypropylene
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fl

$5,060.00

HUSKY PUMP, 1050S-PC01AS1SSSSPOPT

GG 651301

HUSKY PUMP, 1050S-PC01AS1SSSSPOPT

Graco 651301 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, SS Balls & PO Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Conductive Polypropylene
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pr

$5,060.00

HUSKY PUMP, 1050S-PC01AS1SSPTPTPT

GG 651305

HUSKY PUMP, 1050S-PC01AS1SSPTPTPT

Graco 651305 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Conductive Polypropylene
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure

$4,980.00

HUSKY PUMP, 1050S-PC01AS1SSPTPOPT

GG 651307

HUSKY PUMP, 1050S-PC01AS1SSPTPOPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, PTFE Balls & PO Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$4,980.00

HUSKY PUMP, 1050S-PC01AS3SSPTPOPT

GG 651458

HUSKY PUMP, 1050S-PC01AS3SSPTPOPT

Graco 651458 Husky 1050 SS Air Operated Double Diaphragm Metal Pump, SS/PT/EPDM Overmolded

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Flu

Call for pricing

HUSKY PUMP, 1050S-PA01AS1SSPTPTSPT

GG 651502

HUSKY PUMP, 1050S-PA01AS1SSPTPTSPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE/SP Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$3,960.00

HUSKY PUMP, 1050S-E, SS/SS/PO/5A

GG 651895

HUSKY PUMP, 1050S-E, SS/SS/PO/5A

Graco 651895 Husky 1050 1 in. (25.4 mm) NPT SS Pump, 120V Compressor, Standard AC Motor, AL Center Section, SS Seats, SS Balls & PO Diaphragm

Durable Pump Technology
- Diaphragm Pump
  - Electric Drive
    - Patent Pending Air Charged Drive
      - Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
      - Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
      Air Inlet Size (in): 3/8
      Air Inlet Thread Gender: Female
      Air Inlet Thread Type: NPT
      Application: Industrial
      Ball Material: 316 Stainless Steel
      Center Section Material: Aluminum
      Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
      Connection Type: Threaded
      Diaphragm Compatible Material: PTFE
      Diaphragm Material: PTFE/EPDM Overmold
      Fluid Inlet Size (cm): 2.54
      Fluid Inlet Size (in): 1
      Fluid Inlet Size (mm): 25.4
      Fluid Inlet Thread Gender: Female
      Fluid Inlet Thread Type: NPT
      Fluid Outlet Size (cm): 2.54
      Fluid Outlet Size (in): 1
      Fluid Outlet Size (mm): 25.4
      Fluid Outlet Thread Gender: Female
      Fluid Outlet Thread Type: NPT
      Fluid Section Material: Stainless Steel
      Manifold Configuration: End Port
      Manifold O-Ring Material: PTFE
      Material: Stainless Steel
      Maximum Air Pressure (bar): 5.5
      Maximum Air Pressure (kPa): 550
      Maximum Air Pressure (MPa): 0.55
      Maximum Air Pressure (psi): 80
      Maximum Amperage (A): 5.7
      Maximum Cycle Rate (CPM): 280
      Maximum Flow Rate (GPM): 42
      Maximum Flow Rate (L/min): 159
      Maximum Fluid Pressure (bar): 4.8
      Maximum Fluid Pressure (kPa): 480
      Maximum

$10,590.00

Husky Pump, 1050S-E, Ss/Pt/Po/6A Obsolete

GG 651928

Husky Pump, 1050S-E, Ss/Pt/Po/6A

$8,290.00

HUSKY PUMP, 3300A-PA01AA1TPACTPBN

GG 652002

HUSKY PUMP, 3300A-PA01AA1TPACTPBN

Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, TPE Seats, AC Balls & TPE Diaphragm

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Offered in ATEX configuration. Expanded material offering to handle numerous applications Flow rates up to 300 gpm (1,135 lpm) Modular stall-resistant air valve design Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections Heavy-duty construction Faster change over with spring loaded pilot valves

$5,140.00

HUSKY PUMP, 3300A-PA01AA1SSPTPTPT

GG 652021

HUSKY PUMP, 3300A-PA01AA1SSPTPTPT

Graco 652021 Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

Overall improved efficiency (up to 40% more efficient)
Highest fluid flow rate in its class
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
Offered in ATEX configuration.
Expanded material offering to handle numerous applications
Flow rates up to 300 gpm (1,135 lpm)
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves

Model: Husky
Series: 3300

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: PTFE
Center Section Material: Aluminum
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: Center Flange ANSI/DIN, Threaded
Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece
Fluid Inlet Size (cm): 7.62
Fluid Inlet Size (in): 3
Fluid Inlet Size (mm): 76.2
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 7.62
Fluid Outlet Size (in): 3
Fluid Outlet Size (mm): 76.2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum
Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Aluminum
Maximum Air Consumption (SCFM): 335
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 103
Maximum Flow Rate (GPM): 300
Maximum Flow Rate (L/min): 1136
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating Temperature (°C): 82
Maximum Operating Temperature (°F): 180
Maximum Solid Size (cm): 1.27
Maximum Solid Size (in): 0.5
Maximum Solid Size (mm): 12.7
Minimum Operating Temperature (°C): 0
Minimum Operating Tempe

$8,570.00

HUSKY PUMP, 3300A-PA01EA1GEGEGEBN

GG 652183

HUSKY PUMP, 3300A-PA01EA1GEGEGEBN

Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, GE Seats, GE Balls & GE Diaphragm

$6,430.00

HUSKY PUMP, 3300P, PP/PT/PT/PT

GG 652404

HUSKY PUMP, 3300P, PP/PT/PT/PT

Graco 652404 Husky 3300 PP Pump, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

Overall improved efficiency (up to 40% more efficient)
Highest fluid flow rate in its class
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
Offered in ATEX configuration.
Expanded material offering to handle numerous applications
Flow rates up to 300 gpm (1,135 lpm)
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves

Model: Husky
Series: 3300

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: PTFE
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: Center Flange ANSI/DIN
Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece
Fluid Inlet Size (cm): 7.62
Fluid Inlet Size (in): 3
Fluid Inlet Size (mm): 76.2
Fluid Outlet Size (cm): 7.62
Fluid Outlet Size (in): 3
Fluid Outlet Size (mm): 76.2
Fluid Section Material: Polypropylene
Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Polypropylene
Maximum Air Consumption (SCFM): 275
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Cycle Rate (CPM): 103
Maximum Flow Rate (GPM): 280
Maximum Flow Rate (L/min): 1060
Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Pressure (bar): 6.9
Maximum Fluid Pressure (kPa): 690
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Solid Size (cm): 1.27
Maximum Solid Size (in): 0.5
Maximum Solid Size (mm): 12.7
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°C): 0
Minimum Storage Temperature (°F): 32
Overall Height (in):

$15,330.00

HUSKY PUMP, 3300P, SP/SP/SP/PT

GG 652423

HUSKY PUMP, 3300P, SP/SP/SP/PT

Husky 3300 PP Pump, PP Center Section, SP Seats, SP Balls & SP Diaphragm

$12,820.00

HUSKY PUMP, 3300A-PA01AA1SPSPSPBN

GG 652036

HUSKY PUMP, 3300A-PA01AA1SPSPSPBN

Graco 652036 Husky 3300 (ANSI/DIN/NPT) Al Pump, AL Center Section with BN Seals, SP Seats, SP Balls & SP Diaphragm

Overall improved efficiency (up to 40% more efficient)
Highest fluid flow rate in its class
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
Offered in ATEX configuration.
Expanded material offering to handle numerous applications
Flow rates up to 300 gpm (1,135 lpm)
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves

Model: Husky
Series: 3300

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Santoprene
Center Section Material: Aluminum
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: Center Flange ANSI/DIN, Threaded
Diaphragm Compatible Material: Santoprene
Diaphragm Material: Santoprene
Fluid Inlet Size (cm): 7.62
Fluid Inlet Size (in): 3
Fluid Inlet Size (mm): 76.2
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 7.62
Fluid Outlet Size (in): 3
Fluid Outlet Size (mm): 76.2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum
Manifold Configuration: Center Port
Manifold O-Ring Material: Buna-N
Material: Aluminum
Maximum Air Consumption (SCFM): 335
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 103
Maximum Flow Rate (GPM): 300
Maximum Flow Rate (L/min): 1136
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating Temperature (°C): 82
Maximum Operating Temperature (°F): 180
Maximum Solid Size (cm): 1.27
Maximum Solid Size (in): 0.5
Maximum Solid Size (mm): 12.7
Minimum Operating Temperature (°C): 0
Minimu

$5,110.00

HUSKY PUMP, 3300P, PP/SP/SP/PT

GG 652400

HUSKY PUMP, 3300P, PP/SP/SP/PT

Husky 3300 PP Pump, PP Center Section, PP Seats, SP Balls & SP Diaphragm

$13,100.00

HUSKY PUMP, 3300A-PA01AA1BNBNBNBN

GG 652058

HUSKY PUMP, 3300A-PA01AA1BNBNBNBN

Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section with BN Seals, BN Seats, BN Balls & BN Diaphragm

$5,860.00

HUSKY PUMP, 3300S, SS/PT/PT/A

GG 652830

HUSKY PUMP, 3300S, SS/PT/PT/A

Husky 3300 (3 in. NPT) SS Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

$16,870.00

HUSKY PUMP, 1050S-E, SS/PT/PO/4E

GG 653027

HUSKY PUMP, 1050S-E, SS/PT/PO/4E

Husky 1050e SS Pump, NEMA 56C Gearbox, SS Center Section, SS Seats, PTFE Balls & PO Diaphragm

Durable Pump Technology

Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material

Diaphragm Pump

Runs dry
No rotating or moving fluid seals
Self-priming

Electric Drive

Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid

Fluid Section

Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls

$11,850.00

HUSKY PUMP, 2200P, P1, PP/SP/SP/A

GG 653500

HUSKY PUMP, 2200P, P1, PP/SP/SP/A

Graco 653500 Husky 2200 PP Pump, Center Flange, PP Center Section, PP Seats, SP Balls & SP Diaphragm

The Husky 2200 air-operated diaphragm pump features a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable. This diaphragm pump is designed with a reinforced frame for improved reliability and will help to eliminate fluid leakage.

Overall improved air efficiency
Highest fluid flow rate in its class
Expanded material offering to handle endless applications
2 in (50.8 mm) ANSI center and end-porting options available
High flow - 200 gpm (757 lpm) in a compact, portable size
Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
Lube-free operation
Available in polypropylene and PVDF

Model: Husky
Series: 2200

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Santoprene
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Windshield Washer Fluid, Diesel Exhaust Fluid, Cutting Oil, Water, Water - Wastewater Treatment, Water, Water - Wastewater Transfer
Connection Type: Center Flange ANSI/DIN
Diaphragm Compatible Material: Santoprene
Diaphragm Material: Santoprene
Fluid Inlet Size (cm): 5.08
Fluid Inlet Size (in): 2
Fluid Inlet Size (mm): 50.8
Fluid Outlet Size (cm): 5.08
Fluid Outlet Size (in): 2
Fluid Outlet Size (mm): 50.8
Fluid Section Material: Polypropylene
Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Polypropylene
Maximum Air Consumption (SCFM): 140
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 125
Maximum Flow Rate (GPM): 200
Maximum Flow Rate (L/min): 757
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Solid Size (cm): 0.9525
Maximum Solid Size (in): 0.375
Maximum Solid Size (mm): 9.525
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°C): 0
Minimum Storage Temperature (°F): 32
Power Source: Air
<

$6,880.00

HUSKY PUMP, 2200P, P1, PP/PT/PT/A

GG 653504

HUSKY PUMP, 2200P, P1, PP/PT/PT/A

Husky 2200 PP Pump, Center Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

Overall improved air efficiency Highest fluid flow rate in its class Expanded material offering to handle endless applications Available with Overmolded diaphragms (up to 5 times longer diaphragm life) 2 in (50.8 mm) ANSI center and end-porting options available High flow - 200 gpm (757 lpm) in a compact, portable size Fluid pressure to 125 psi (8.6 bar, 0.86 MPa) Lube-free operation Available in polypropylene and PVDF

$7,810.00

HUSKY PUMP, 2200P, P1, PP/PT/PO/J

GG 653505

HUSKY PUMP, 2200P, P1, PP/PT/PO/J

Husky 2200 PP Pump, Center Flange, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

$8,900.00

Cylinder, Ultralife (750Cc)

GG 685971

CYLINDER, ULTRALIFE (750CC)

Graco 685971 Cylinder Pump, SST/ Ultra-Life for 750 cc 4 Ball Lowers

$2,970.00

HUSKY PUMP, 2200F, F2, PV/PT/PT/A

GG 653546

HUSKY PUMP, 2200F, F2, PV/PT/PT/A

Husky 2200 PVDF Pump, PP Center Section, PVDF Seats, PTFE Balls & PTFE Diaphragm

$18,870.00

HUSKY PUMP, 2200F, F2, PV/PT/PO/J

GG 653547

HUSKY PUMP, 2200F, F2, PV/PT/PO/J

Husky 2200 PVDF Pump, PP Center Section, PVDF Seats, PTFE Balls & PO Diaphragm

$18,870.00

HUSKY PUMP, 15120P, P2, PP/PT/PT/PT

GG 654511

HUSKY PUMP, 15120P, P2, PP/PT/PT/PT

Graco 654511 Husky 15120 PP Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 15120 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Overall improved efficiency (up to 40% more efficient)
Highest fluid flow rate in its class
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
1-1/2 in (38.1 mm) ANSI center and end-porting options available
High flow - 120 gpm (454 lpm) in a compact, portable size
Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
Lube-free operation
Available in polypropylene and PVDF

Model: Husky
Series: 15120

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: PTFE
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Windshield Washer Fluid, Diesel Exhaust Fluid, Cutting Oil, Water, Water, Water - Wastewater Transfer
Connection Type: End Flange ANSI/DIN
Diaphragm Compatible Material: PTFE
Diaphragm Material: PTFE/EPDM 2-Piece
Fluid Inlet Size (cm): 3.81
Fluid Inlet Size (in): 1-1/2
Fluid Inlet Size (mm): 38.1
Fluid Inlet Thread Gender: Female
Fluid Outlet Size (cm): 3.81
Fluid Outlet Size (in): 1-1/2
Fluid Outlet Size (mm): 38.1
Fluid Outlet Thread Gender: Female
Fluid Section Material: Polypropylene
Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Polypropylene
Maximum Air Consumption (SCFM): 85
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 183
Maximum Flow Rate (GPM): 120
Maximum Flow Rate (L/min): 454
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Solid Size (cm): 0.635
Maximum Solid Size (in): 0.25
Maximum Solid Size (mm): 6.35
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°C): 0
Minimum Storage Temperature (°F): 32

$5,510.00

HOSE, PTFE, MEDIUM PRESSURE

GG 685606

HOSE, PTFE, MEDIUM PRESSURE

$3,830.00

Fuse, Fuseblock Buss Jt60060

GG 6690-24-165

Fuse, Fuseblock Buss Jt60060

$445.00

HUSKY PUMP, 2200P, P2, PP/PT/PO/J

GG 653512

HUSKY PUMP, 2200P, P2, PP/PT/PO/J

Graco 653512 Husky 2200 PP Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

Overall improved air efficiency
Highest fluid flow rate in its class
Expanded material offering to handle endless applications
2 in (50.8 mm) ANSI center and end-porting options available
High flow - 200 gpm (757 lpm) in a compact, portable size
Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
Lube-free operation
Available in polypropylene and PVDF

Model: Husky
Series: 2200

Air Exhaust Port Size (in): 1
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: PTFE
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Windshield Washer Fluid, Diesel Exhaust Fluid, Cutting Oil, Water, Water - Wastewater Treatment, Water, Water - Wastewater Transfer
Connection Type: End Flange ANSI/DIN
Diaphragm Material: PTFE Overmold
Fluid Inlet Size (cm): 5.08
Fluid Inlet Size (in): 2
Fluid Inlet Size (mm): 50.8
Fluid Outlet Size (cm): 5.08
Fluid Outlet Size (in): 2
Fluid Outlet Size (mm): 50.8
Fluid Section Material: Polypropylene
Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Polypropylene
Maximum Air Consumption (SCFM): 157
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 155
Maximum Flow Rate (GPM): 200
Maximum Flow Rate (L/min): 757
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Solid Size (cm): 0.9525
Maximum Solid Size (in): 0.375
Maximum Solid Size (mm): 9.525
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°C): 0
Minimum Storage Temperature (°F): 32
Power Source: Air

$8,900.00

Fitting, Swivel, 1/2Nptm X 1/2Npsm

GG 7597-07

Fitting, Swivel, 1/2Nptm X 1/2Npsm

$190.00

MANIFOLD, REMOTE FILL WITH VENT ASM

GG 77X542

MANIFOLD, REMOTE FILL WITH VENT ASM

Graco 77X542 Remote-Fill Port Manifold with Vent for use with Auto-Fill Shut-Off Option Lubrication Pumps

Application: For use with optional Auto-Fill Shut-Off Electric Dyna-Star® HP and HF, G3, and Compact Dyna-Star Lubrication Systems.

Remote-fill port manifold with vent

Application: Off-Road Equipment

Compatible Material: Grease
For Use With: Compact Dyna-Star Pumps, Electric Dyna-Star Pumps, G3 Pumps, Hydraulic Dyna-Star Jakes
Includes: Remote Fill Port Manifold, Manual Valve, Pressure Gauge, Relief Valve, Lubricant, Fittings, Hardware
Kit Type: Remote-Fill Port Manifold

$770.00

NUT, HEX, STD 7/16-14, UNC

GG 7733-43

NUT, HEX, STD 7/16-14, UNC

$3.00

MODULE, INJ, 24V, HP, 60#, TANK, F, LL

GG 77X104

MODULE, INJ, 24V, HP, 60#, TANK, F, LL

Graco 77X104 Electric Dyna-Star® HP 24 VDC Injector Module with Pump, Tube-in-Tube, Vent Valve, Follower Plate, LL Kit, Cover, Tank for 60 lb (27 kg). Reservoir

The Dyna-Star HP and HF 24VDC Electric Lubrication Pumps complement our Dyna-Star 10:1 Hydraulic and Fire-Ball 300 50:1 Pneumatic pump offering. For heavy-duty construction and mining equipment, rely on the Electric Dyna-star to supply fresh lubricant and flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.

Application: For use in mining operations, milling and crushing, heavy-duty construction, well services, and industrial.

High-quality helical hardened steel gears are lubricated for life and sealed to keep contaminants out for longer lasting performance.
Ability to adjust motor controls like power input, motor speed, current control and signal input to perfectly match the pump to your application and environmental changes.
Mechanical auto-fill shutoff and remote-mounted fill port ensures clean and efficient refills.
IP69K rated
Built-in pressure relief for safety and compact, efficient installations.
Cavitation-free fill and vent path provides simple and direct venting and filling to the foot of the pump.
Built-in lift ring is rated to 500 lbs (226 kg).
Strong 12 gauge steel reservoir, 60 lb (27 kg) size.
AC to DC Converter Box for fixed and in-plant applications.

Model: Dyna-Star

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT
Application: In-Plant Machinery, Off-Road Equipment
Compatible Material: Grease
Compatible Metering Device: Single Line Parallel
Fluid Outlet Size (in): 0.375
Fluid Outlet Size (mm): 9.5250
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Includes: HP Pump 24 VDC, tube-in-tube, Vent Valve, cover, 60 lb. reservoir
IP Rating: IP69K
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500
Minimum cST Grade (cST): 40
Overall Height (cm): 77.5
Overall Height (in): 30.5
Overall Height (mm): 775
Overall Width (cm): 36.8
Overall Width (in): 14.5
Overall Width (mm): 368
Power Connection Type: M12
Power Type: Pneumatic

$9,260.00

Washer, Lock, Spring, 7/16

GG 7734-08

Washer, Lock, Spring, 7/16

$1.50

KIT, STDRUM, 24VDC, HF, 400#

GG 77X122

KIT, STDRUM, 24VDC, HF, 400#

Graco 77X122 Standard Drum Kits - 24 VDC HF Pump and Cover for 400 lb (180 kg). Reservoir

The Dyna-Star HP and HF 24VDC Electric Lubrication Pumps complement our Dyna-Star 10:1 Hydraulic and Fire-Ball 300 50:1 Pneumatic pump offering. Now you have three power source options for automatic lubrication systems and transfer applications. Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.

Application: Electric pumps for heavy duty automatic lubrication and transfer systems.

Auto Fill Shut Off - mechanical shut off of fill pump for clean and efficient refill
Graco Advantage Drive™ - heavy duty gear drive-lubed for life
Tube-in-tube vent and fill path - convert drum to injector system instantly
Motor control - speed and AMP control
Cold weather performance (-40º C)
More efficient seal replacement

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Application: In-Plant Machinery, Off-Road Equipment
Compatible Material: Grease
Compatible Metering Device: Single Line Parallel
Fluid Outlet Size (in): 0.375
Fluid Outlet Size (mm): 9.5250
Fluid Outlet Thread Type: NPT
Includes: HF Pump 24 VDC, Cover for 120 lb (54 kg) reservoir
IP Rating: IP69K
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500
Minimum cST Grade (cST): 40
Overall Height (cm): 112.5
Overall Height (in): 44.3
Overall Height (mm): 1125
Overall Width (cm): 27.9
Overall Width (in): 11
Overall Width (mm): 279
Power Connection Type: M23
Power Type: Pneumatic

$7,580.00

Washer, Lock, Spring, 1/4

GG 7734-06

Washer, Lock, Spring, 1/4

$1.50

Gauge, Pressure

GG 802072

Gauge, Pressure

$73.75

FILTER, INLINE 3/8 NPT

GG 77X523

FILTER, INLINE 3/8 NPT

Graco 77X523 400 Micron Inline Filter, Maximum 5,000 psi (344 bar) Inlet Pressure

Reduce harmful contamination with 400µm, serviceable grease filters

400 micron inline filter, maximum 5,000 psi (344 bar) inlet pressure

Application: In-Plant Machinery, Off-Road Equipment

Compatible Material: Grease
For Use With: Dyna-Star Electric Powered HP and HF 24 VDC
Maximum Working Pressure (bar): 344
Maximum Working Pressure (kPa): 34400
Maximum Working Pressure (MPa): 34.5
Maximum Working Pressure (psi): 5000
Port Size (cm): 0.9525
Port Size (in): 3/8
Port Size (mm): 9.525

$383.00

Belt, Ax46

GG 803889

Belt, Ax46

$27.60

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805538

G-FORCE II TIP, SPRAY, Q-TYPE

Washer Spray Tip, 4003 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power.

40 Degree Washing Tip

Wide spray for washing or rinsing a large area.

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805537

G-FORCE II TIP, SPRAY, Q-TYPE

Washer Spray Tip, 2503 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power. Tips include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.

25 degree Flushing Tip

Most common nozzle for general cleaning.

Cleaning dirt from siding, sidewalks, outdoor furniture, etc.

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805536

G-FORCE II TIP, SPRAY, Q-TYPE

Washer Spray Tip, 1503 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power. Tips include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.

15 degree Chiseling Tip

Works like a scraper when used at a 40° angle.

Stripping paint; removing grease, mildew and stains.

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805544

G-FORCE II TIP, SPRAY, Q-TYPE

Washer Spray Tip, 1504 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power. Tips include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.

15 degree Chiseling Tip

Works like a scraper when used at a 40° angle.

Stripping paint; removing grease, mildew and stains.

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805545

G-FORCE II TIP, SPRAY, Q-TYPE

Washer Spray Tip, 2504 Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power.

25 Degree Flushing Tip

Most common nozzle for general cleaning

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805543

G-FORCE II TIP, SPRAY, Q-TYPE

Graco 805543 Washer Spray Tip, 0004

Maximize your cleaning power by selecting the tip that best matches the maximum pressure and flow of your pressure washer. For lower pressure spraying, choose a larger size tip to maximize your flow and cleaning power.

Application: Tips include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.

0 Degree Cutting Tip
Delivers a concentrated stream that can gouge or cut.
Removing stains from concrete or other hard surfaces.

Model: G-Force II
Series: Washer Spray Tip

Color: Red
Connection Size (in): 0.25
Connection Type: Quick Disconnect
For Use With: AquaMax, G-Force, G-Force II, Hydra-Clean
Material: Stainless Steel
Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000
Nominal Size: 4
Orifice Diameter (in): 0.047

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805549

G-FORCE II TIP, SPRAY, Q-TYPE

Graco 805549 Washer Spray Tip, 25045

25 Degree Flushing Tip
Color: Green
Connection Size (in): 0.25
Connection Type: Quick Disconnect
For Use With: AquaMax, G-Force, G-Force II, Hydra-Clean
Material: Stainless Steel
Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000
Nominal Size: 25045
Orifice Diameter (in): 0.045

$7.25

G-FORCE II TIP, SPRAY, Q-TYPE

GG 805546

G-FORCE II TIP, SPRAY, Q-TYPE

Graco 805546 Washer Spray Tip, 4004

40 Degree Washing Tip
Color: White
Connection Size (in): 0.25
Connection Type: Quick Disconnect
For Use With: AquaMax, G-Force, G-Force II, Hydra-Clean
Material: Stainless Steel
Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000
Nominal Size: 4004
Orifice Diameter (in): 0.030

$7.25

G-Force Ii Tip, Spray, Q-Type

GG 805562

G-Force Ii Tip, Spray, Q-Type

$7.25

G-Force Ii Tip, Spray, Q-Type

GG 805584

G-Force Ii Tip, Spray, Q-Type

$7.25

Guard, Footswitch Assembly, 18/3, 10A

GG 81/0136-G/25

Guard, Footswitch Assembly, 18/3, 10A

$610.00

FUSE, 5MMX20MM, 4A, FAST ACTING

GG 81/1054-4/11

FUSE, 5MMX20MM, 4A, FAST ACTING

$12.00

Switch, Prox, Ind, 4mmRect, NO, 3W, PN

GG 81/0263/11

Switch, Prox, Ind, 4mmRect, NO, 3W, PN

$820.00

MOTOR, PNEU, AGIT, 0.32HP, 15

GG 82/0216/11

MOTOR, PNEU, AGIT, 0.32HP, 15

$3,470.00

PLC

GG 81/1096-14AC/22

PLC

$2,370.00

REGULATOR, LOW PRESSURE

GG 830353

REGULATOR, LOW PRESSURE

Graco 830353 Low Pressure Fluid Regulator, 250 Max psi, 3-100 psi Range, 3.0 GPM, SST, Air Type, 3/8 (f) x 1/4 (f)

Fluid pressure regulators control pressure of the downstream fluid, allowing operators to accurately control the pressure to guns, applicators and dispense valves

Actuation Type: Air

Includes: Regulator Only
Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525
Inlet Thread Type: NPSM
Maximum Flow Rate (GPM): 3
Maximum Flow Rate (L/min): 11.36
Maximum Regulated Pressure (bar): 7.0
Maximum Regulated Pressure (kPa): 700
Maximum Regulated Pressure (MPa): 0.7
Maximum Regulated Pressure (psi): 100
Maximum Viscosity (cP): 1000
Maximum Working Pressure (bar): 18
Maximum Working Pressure (kPa): 1800
Maximum Working Pressure (MPa): 1.8
Maximum Working Pressure (psi): 250
Minimum Regulated Pressure (bar): 0.2
Minimum Regulated Pressure (kPa): 20
Minimum Regulated Pressure (MPa): 0.02
Minimum Regulated Pressure (psi): 3
Outlet Size (cm): 0.635
Outlet Size (in): 1/4
Outlet Size (mm): 6.35

$2,400.00

Cap, Flat, Fluid Regulator

GG 833166

Cap, Flat, Fluid Regulator

$488.00

SS Fluid Regulator

GG 830351

SS Fluid Regulator

$2,650.00