GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

VALVE, HI PRESS

Compatible Material: Varnish Primers, Latex, Solventborne Paints, Solventborne, High Solids, Single Components, CARC, Metallics, Stains, Lacquer, Enamel, Epoxies

$5,200.00

Bowl, Regulator W/Dump

GG 833383

Bowl, Regulator W/Dump

$1,385.00

Fitting, Pipe, Nipple, Hex, 3/8X3/8Npt

GG 8462-17

Fitting, Pipe, Nipple, Hex, 3/8X3/8Npt

$145.00

Cover, Spray Hose Cover, 1000 Ft

GG 865696

Cover, Spray Hose Cover, 1000 Ft

$86.75

MONARK TRANSFER PUMP, 5:1

Graco 902147 5:1 Ratio Stainless Steel Monark Pump

Designed for high production applications, Monark pumps provide uniform and easily controlled delivery with its reliable Monark air motor.

Application: Positive displacement, 2-ball piston design. Typical Fluids handled include solvent-borne and water-borne fluids, high solids, plural component coatings, resins, stains, lacquers, varnishes, cleaning fluids, acid-catalyzed materials and high-solid coatings.

Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
Fluid return stanchion for circulation back to the pump
Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids

Model: Monark

Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
Fluid Outlet Size (in): 1/2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Material: Stainless Steel
Maximum Air Consumption (SCFM): 8.2
Maximum Air Inlet Pressure (bar): 8.2
Maximum Air Inlet Pressure (kPa): 827
Maximum Air Inlet Pressure (psi): 120
Maximum Flow Rate (GPM): 2.5
Maximum Flow Rate (L/min): 9.5
Maximum Working Pressure (bar): 41
Maximum Working Pressure (kPa): 4100
Maximum Working Pressure (MPa): 4.1
Maximum Working Pressure (psi): 600
Portable: Non-Portable
Power Type: Pneumatic
Pump Ratio: 5:1

$5,170.00

Cylinder Pump

GG 902980

Cylinder Pump

$4,560.00

REGULATOR BACK PRESSURE

GG 903508

REGULATOR BACK PRESSURE

Graco 903508 Back Pressure Regulator, Low Pressure Corrosion Resistant, 15 GPM (56.7 lpm), 180 Max psi, Manual, 3/8 (m) x 3/8 (f), with Gauge

Back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand

Stainless steel wetted materials are compatible with catalyst and waterborne materials
Hardened stainless steel seat ensure low wear and long life
PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
Air operated models available for automated control, Conversion kit (15J498)

Compatible Material: Catalyst, Waterborne

Gauge Port Size (cm): 0.635
Gauge Port Size (in): 1/4
Gauge Port Size (mm): 6.35
Gauge Port Type: NPT
Includes: Gauge
Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525
Inlet Thread Type: NPT
Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8
Maximum Regulated Pressure (bar): 14
Maximum Regulated Pressure (kPa): 1400
Maximum Regulated Pressure (psi): 200
Maximum Viscosity (cP): 1000
Maximum Working Pressure (bar): 21
Maximum Working Pressure (kPa): 2100
Maximum Working Pressure (psi): 300
Minimum Regulated Pressure (bar): 0.35
Minimum Regulated Pressure (kPa): 35
Minimum Regulated Pressure (MPa): 0.035
Minimum Regulated Pressure (psi): 5
Outlet Size (cm): 0.9525
Outlet Size (in): 3/8
Outlet Size (mm): 9.525
Outlet Thread Type: NPT

$2,250.00

REGULATOR, MASTIC

GG 903958

REGULATOR, MASTIC

Graco 903958 Spring Operated Mastic Fluid Pressure Regulator

The mastic regulator is ideal for low to high viscosity sealants or adhesives

Application: These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

Actuation Type: Spring

Flow Control Type: Regulation
Gauge Port Size (cm): 1.905
Gauge Port Size (in): 3/4
Gauge Port Size (mm): 19.05
Gauge Port Type: NPT
Inlet Size (cm): 1.905
Inlet Size (in): 3/4
Inlet Size (mm): 19.05
Inlet Thread Type: NPT
Maximum Regulated Pressure (bar): 310
Maximum Regulated Pressure (kPa): 31000
Maximum Regulated Pressure (MPa): 31.0
Maximum Regulated Pressure (psi): 4500
Maximum Viscosity (cP): 80000
Maximum Working Pressure (bar): 344
Maximum Working Pressure (kPa): 34400
Maximum Working Pressure (MPa): 34.4
Maximum Working Pressure (psi): 5000
Minimum Regulated Pressure (bar): 70
Minimum Regulated Pressure (kPa): 7000
Minimum Regulated Pressure (MPa): 7.0
Minimum Regulated Pressure (psi): 1000
Outlet Size (cm): 1.905
Outlet Size (in): 3/4
Outlet Size (mm): 19.05
Outlet Thread Type: NPT

$2,550.00

BALL, SEAT

GG 904029

BALL, SEAT

Graco 904029 Ball Kit for High Pressure Mastic Regulators

Use this kit to replace the Ball of Graco Fluid Pressure Regulators

For Use With: Mastic Fluid Regulator

Material: Carbon Steel

$160.50

Kit, Packing Ptfe (207550)

GG 904427

Kit, Packing Ptfe (207550)

$1,470.00

Filter, Bag

GG 915515

Filter, Bag

$1,645.00

SEAT, REGULATOR

GG 904030

SEAT, REGULATOR

Regulator Seat Kit for High Pressure Mastic Regulators Use this kit to replace the Seat of Graco Fluid Pressure Regulators

$359.00

ROD, TIE MJ 6

GG 557518

ROD, TIE MJ 6

Graco 557518 Trabon® MJ Divider Valve - 6 Section Tie Rod (2 Required)

Application: For use with Trabon® MJ Divider Valves.

6-Section Tie Rods
Two tie rods and tie rod nuts required for assembly.
NPSF
Trabon part number 10999-6

Model: Trabon
Series: MJ

Application: On-Road Vehicles, Off-Road Equipment

$23.40

DISK, BURST, .688 1450 PSI YELLOW

GG 557433

DISK, BURST, .688 1450 PSI YELLOW

Replacement Rupture Disk, 11/16 in, 1450 psi, Yellow Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 1,450 psi - .688" - yellow

Lubriquip part number 509-292-000 Trabon part number 9292

$5.30

DISK, BURST, .375 2950/7300 PSI BLUE

GG 557428

DISK, BURST, .375 2950/7300 PSI BLUE

Replacement Rupture Disk, 3/8 in, 7300 psi, Blue Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 7,300 psi - .375" - blue

Lubriquip part number 509-283-000 Trabon part number 9283

$3.65

DISK, BURST, .688 3250 PSI PURPLE

GG 557439

DISK, BURST, .688 3250 PSI PURPLE

Replacement Rupture Disk, 11/16 in, 3250 psi, Purple Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 3,250 psi - .688" - purple

Lubriquip part number 509-298-000 Trabon part number 9298

$5.30

FITTING, FILL STUD, 1/4 NPT

GG 557374

FITTING, FILL STUD, 1/4 NPT

Graco 557374 Trabon Style Fill Stud, 1/4 inch NPT male

Application: Included with Modu-Flo, E-Series, Lube Master, LubriSystem, PH and other Trabon grease pumps & reservoirs.

Trabon Style Fill Stud
Lubriquip part number 506-189-001
Trabon part number 6189-1

Series: Trabon

Connection Type: Threaded
End A Inlet Thread Gender: None
Maximum Working Pressure (psi): 500
Outlet Size (in): 1/4-18 NPTF
Outlet Thread Gender: Male

$35.20

ROD, TIE, MSP, 7 SECTION

GG 557735

ROD, TIE, MSP, 7 SECTION

Trabon® MSP Divider Valve - 7 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 7-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-860

$8.25

ROD, TIE, MSP, 6 SECTION

GG 557734

ROD, TIE, MSP, 6 SECTION

Trabon® MSP Divider Valve - 6 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 6-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-850

$6.65

DISK, .375 2650/6400 PSI PNK

GG 557427

DISK, .375 2650/6400 PSI PNK

Graco 557427 Replacement Rupture Disk, 3/8 in, 6400 psi, Pink

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-282-000
Trabon part number 9282

Color: Pink

Maximum Working Pressure (bar): 441
Maximum Working Pressure (kPa): 44096
Maximum Working Pressure (MPa): 44.1
Maximum Working Pressure (psi): 6400
Number of Pieces: 1
Overall Diameter (cm): 1
Overall Diameter (in): 0.375
Overall Diameter (mm): 10

$3.65

DISK, BURST, .375 2050/5500 PSI ORANGE

GG 557425

DISK, BURST, .375 2050/5500 PSI ORANGE

Replacement Rupture Disk, 3/8 in, 5500 psi, Orange Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 5,500 psi - .375" - orange

Lubriquip part number 509-280-000 Trabon part number 9280

$3.65

ROD, TIE, MSP, 8 SECTION

GG 557736

ROD, TIE, MSP, 8 SECTION

Trabon® MSP Divider Valve - 8 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 8-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-870

$8.25

ROD, TIE, MX 5

GG 557490

ROD, TIE, MX 5

Trabon® MX Divider Valve - 5 Section Tie Rod For use with Trabon® MX Divider Valves. 5-Section Tie Rods Lubriquip part number 510-505-050 Trabon part number 10505-5

$73.75

STRAINER, 138 MICRON

GG 557700

STRAINER, 138 MICRON

Replacement Filter Element, 149 micron/100 mesh; Lubriquip part number 525-766-010 For use with High Pressure In-Line Grease Filters.

Replacement element for filter assemblies 563507, 557517, 564406

$234.00

ROD, TIE, MX 3

GG 557488

ROD, TIE, MX 3

Trabon® MX Divider Valve - 3 Section Tie Rod For use with Trabon® MX Divider Valves. 3-Section Tie Rods Lubriquip part number 510-505-030 Trabon part number 10505-3

$49.00

ROD, TIE, FEEDER, MJ-3

GG 557515

ROD, TIE, FEEDER, MJ-3

Trabon® MJ Divider Valve - 3 Section Tie Rod (2 Required) For use with Trabon® MJ Divider Valves. 3-Section Tie Rods Two tie rods and tie rod nuts required for assembly. NPSF Lubriquip part number 510-999-030 Trabon part number 10999-3

$9.35

DISK, .688 1750 PSI RED

GG 557434

DISK, .688 1750 PSI RED

Graco 557434 Replacement Rupture Disk, 11/16 in, 1750 psi, Red

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-293-000
Trabon part number 9293

Color: Red

Maximum Working Pressure (bar): 121
Maximum Working Pressure (kPa): 12058
Maximum Working Pressure (MPa): 12.1
Maximum Working Pressure (psi): 1750
Number of Pieces: 6
Overall Diameter (cm): 1.7
Overall Diameter (in): 0.688
Overall Diameter (mm): 17

$5.30

BRACKET, SWITCH, T-CYCLE

GG 557546

BRACKET, SWITCH, T-CYCLE

Replacement Bracket for Cycle Switch For use with Cycle Switches.

Replacement bracket for 563272, 563273, 564357

Lubriquip part number 511-968-002

$108.00

DISK, .688 2350 PSI ALUM

GG 557436

DISK, .688 2350 PSI ALUM

Graco 557436 Replacement Rupture Disk, 11/16 in, 2350 psi, Aluminum

Application: Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Lubriquip part number 509-295-000
Trabon part number 9295

Color: Aluminum

Maximum Working Pressure (bar): 162
Maximum Working Pressure (kPa): 16192
Maximum Working Pressure (MPa): 16.2
Maximum Working Pressure (psi): 2350
Number of Pieces: 6
Overall Diameter (cm): 1.7
Overall Diameter (in): 0.688
Overall Diameter (mm): 17

$5.30

ROD, TIE, MSP, 3 SECTION

GG 557731

ROD, TIE, MSP, 3 SECTION

Graco 557731 Trabon® MSP Divider Valve - 3 Section Tie Rod (3 Required)

Application: For use with Trabon® MSP Divider Valves.

3-Section Tie Rods
Three tie rods and tie rod nuts required for assembly
Lubriquip part number 527-001-820

Model: Trabon
Series: MSP

Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

$5.05

ROD, TIE, MSP, 5 SECTION

GG 557733

ROD, TIE, MSP, 5 SECTION

Trabon® MSP Divider Valve - 5 Section Tie Rod (3 Required) For use with Trabon® MSP Divider Valves. 5-Section Tie Rods Three tie rods and tie rod nuts required for assembly Lubriquip part number 527-001-840

$6.65

CAP, FILL, RESERVOIR

GG 557797

CAP, FILL, RESERVOIR

Reservoir Fill Cap For use with Lube Master Pump Packages.

Fill Cup

Lubriquip part number 534-147-000 Trabon part number 34147

$123.50

ROD, TIE, MXP, 3 SECTION

GG 557766

ROD, TIE, MXP, 3 SECTION

Graco 557766 Trabon® MXP Divider Valve - 3 Section Tie Rod (3 Required)

Application: For use with Trabon® MXP Divider Valves.

3-Section Tie Rod
Three required per assembly
Lubriquip part number 527-300-270

Model: Trabon
Series: MXP

Application: In-Plant Machinery

$23.40

FILTER, 25 MICRON, 3 5/8 LG

GG 557804

FILTER, 25 MICRON, 3 5/8 LG

Graco 557804 Replacement Filter Cartridge, 25-micron Standard, Lubriquip part 540-272-001, replaces part 540-272-000 and Trabon part 40272, Genuine Trabon replacement element for Lubriquip assemblies 183-000-010, 183-000-011, 183-000-050, 183-000-051, 183-000-150, 183-000-151

Application: For use with Single and Dual Cartridge Filters.

25 micron Replacement Filter Element
2-5/8 in (67 mm) OD x 3-5/8 in (92 mm) Standard Length Element

For Use With: Cartridge Oil Filters

$77.25

METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT

GG 557813

METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT

Graco 557813 Meter-Flo® Electric Pump, 30 cu in/min (492 cc/min) @ 1,725 rpm, NPT Ports, CCW

With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-001

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 30
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT

GG 557815

METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT

Graco 557815 Meter-Flo® Electric Pump, 84 cu in/min (1377 cc/min) @ 1,725 rpm, NPT Ports, CCW

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-021

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 84
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT

GG 557816

METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT

Meter-Flo® Electric Pump, 117 cu in/min (1917 cc/min) @ 1,725 rpm, NPT Ports, CCW

Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-041

$1,520.00

METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT

GG 557814

METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT

Graco 557814 Meter-Flo® Electric Pump, 14 cu in/min (229 cc/min) @ 1,725 rpm, NPT Ports, CCW

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-011

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 14
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

FILTER, 25 MICRON, 9-5/8" LG

GG 557807

FILTER, 25 MICRON, 9-5/8" LG

Replacement Filter Cartridge, 25-micron Ex-Lng; Lubriquip part 540-275-001, replaces part 540-275-000 and Trabon part 40275; Genuine Trabon replacement filter element for Lubriquip filter assemblies 183-000-080, 183-000-081, 183-000-120, 183-000-121, 183-000-210, 183-000-211 For use with Single and Dual Cartridge Filters.

25 micron Replacement Filter Element

2-5/8 in (67 mm) OD x 9-5/8 in (92 mm) Extra Long Element

$131.00

SWITCH, PRESS ADJ, 1000-4700 PSI

GG 557829

SWITCH, PRESS ADJ, 1000-4700 PSI

Moisture-Resistant Single Control Pressure Switch, 4700 psi (324 bar)

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment. Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly LED lights visually display pressure switch functions Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers; 124595 4-pin M12 micro-connector sold separately Moisture resistant and factory set to ensure accuracy for long life and reliability Sends an alarm signal to alert either a high or low pressure condition Available for hydraulic pressures from 400 to 4700 psi (28 to 324 bar) 1/4 in NPT thread allows quick connection to injector systems Lubriquip part number 542-210-120

$617.00

METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT

GG 557818

METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT

Graco 557818 Meter-Flo® Electric Pump, 40 cu in/min (655 cc/min) @ 1,725 rpm, NPT Ports, CCW

Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.

Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
Positive displacement helps assure constant delivery of proper volume.
Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
Adjustable pressure relief valve protects pump against overload conditions.
Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
Lubriquip part number 540-800-091

Model: Meter-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPT
Maximum Flow Rate (ci/min): 40
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Fluid Output Pressure (bar): 103
Maximum Fluid Output Pressure (psi): 1500
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum SUS Grade (SUS): 3000
Maximum Working Pressure (bar): 103.4
Maximum Working Pressure (kPa): 10340
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Minimum Operating Temperature (°C): 10
Minimum Operating Temperature (°F): 50
Minimum SUS Grade (SUS): 300
Power Type: Electric

$1,520.00

GAUGE, 3000 PSI 1/4NPT C/B LIQ

GG 557866

GAUGE, 3000 PSI 1/4NPT C/B LIQ

Graco 557866 Pressure Gauge, Back-Mounted, 0-3000 psi, 2 1/2 in. Dial Diameter

Dial Diameter (cm): 6
Dial Diameter (in): 2.5
Dial Diameter (mm): 64

Inlet Size (cm): 0.635
Inlet Size (in): 1/4
Inlet Size (mm): 6.35
Inlet Thread Type: NPT
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000

$250.00

NGL #00 EP Lithium Grease 3 Lb. Bucket

GG 557941

NGL #00 EP Lithium Grease 3 Lb. Bucket

$341.00

GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC

GG 557931

GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC

Graco 557931 3-Way Solenoid Valve Kit - 24 VDC

Application: For use with Grease Jockey On-Road Mobile Lubrication Systems.

24 VDC replacement solenoid
Lubriquip part number 550-250-265

Application: On-Road Vehicles, Off-Road Equipment

Compatible Material: Air
Material: Brass
Maximum Voltage (V dc): 24
Port Size (cm): 0.1191
Port Size (in): 0.046875
Port Size (mm): 1.1913
Power Rating (W): 7

$168.50

KIT, RELIEF VLV VIKING PUMP

GG 557998

KIT, RELIEF VLV VIKING PUMP

Graco 557998 Meter-Flo® Relief Valve Repair Kit

Application: For use with Meter-Flo Pumps.

Meter-Flo Relief Valve Repair Kit - 540-800-XX1 Models
Lubriquip part number 560-001-920

For Use With: Viking Pumps

Includes: Poppet, Cap, Spring, Hardware
Kit Type: Repair Kit

$76.75

Kit, Mvb Pump Seal

GG 558015

Kit, Mvb Pump Seal

$83.25

CABLE, CONN 6'

GG 558021

CABLE, CONN 6'

Graco 558021 Mini-Straight Connection Cable - 6 ft, 3-Pin

Application: For use with Proximity Switches.

3-pin cable, straight connector, 6 feet (1.83 m)
Lubriquip part number 570-999-080

Amperage (A): 13

For Use With: MSP Divider Valves, Proximity Switches, Air Oil Lubrication System
IP Rating: IP68 NEMA 6P
Jacket Material: PVC

$100.00

CABLE, CONN 12'

GG 558022

CABLE, CONN 12'

Mini-Straight Connection Cable - 12 ft, 3-Pin For use with Proximity Switches.

3-pin cable, straight connector, 12 feet (3.66 m)

Lubriquip part number 570-999-090

$135.50

CABLE, CONN CABLE 4PN 24V

GG 558025

CABLE, CONN CABLE 4PN 24V

Graco 558025 Proximity Switch Connector Cable - 24 V, 12 ft, 4-Pin, Straight Connector, Polarity, PNP

Application: For use with Proximity Switches.

4-pin cable, straight connector, polarity, PNP, 12 feet (3.66 m)
Lubriquip part number 570-999-953

For Use With: Proximity Switches

$552.00

CABLE, 5 PIN W/ CONN

GG 558024

CABLE, 5 PIN W/ CONN

Proximity Switch Connector Cable - 12 ft, 5-Pin For use with Proximity Switches.

5-pin cable, straight connector, 12 feet (3.66 m)

Lubriquip part number 570-999-170

$194.50

Sleeve, Brass 5/32T Compr Type

GG 558188

Sleeve, Brass 5/32T Compr Type

$5.95

Nut

GG 558190

Nut

$38.60

NUT, BRASS 5/32 TUBE COMPR

GG 558189

NUT, BRASS 5/32 TUBE COMPR

Graco 558189 Thrif-T Luber Hardware - TLCN-00 - Compression Nut

Application: For use with Thrif-t Luber Pumps.

Thrif-T Luber Hardware - TLCN-00 - Compression Nut
Lubriquip part number 435-390-070

Inside Diameter (in): 0.3125
Inside Diameter (mm): 7.9375

Material: Brass
Nut Type: Hex Nut

Call for pricing

O-RING, -908 VITON

GG 558730

O-RING, -908 VITON

Graco 558730 O-Ring, Viton

Application: For use with Saniforce and Husky Electric Diaphragm Pumps.

Lubriquip part number GOV-060-020

For Use With: Husky 1050e Pump, SaniForce 1040e Pump

Inside Diameter (cm): 1.6
Inside Diameter (in): 0.644
Inside Diameter (mm): 16.4
Material: Viton
Number of Pieces: 1
Outside Diameter (cm): 2.1
Outside Diameter (in): 0.818
Outside Diameter (mm): 20.8

$3.65

O-RING, -113 VITON-A 75 DURO

GG 558692

O-RING, -113 VITON-A 75 DURO

Lubriquip part number 422-041-130
Trabon part number 25613-V
Manzel part number 22X4-113

Inside Diameter (cm): 1.4
Inside Diameter (in): 0.549
Inside Diameter (mm): 13.9
Material: Viton
Number of Pieces: 1
Outside Diameter (cm): 1.9
Outside Diameter (in): 0.755
Outside Diameter (mm): 19.2

Call for pricing

COUPLER, 1/4, W/CHECK

GG 558906

COUPLER, 1/4, W/CHECK

Mating Coupler/Coupling for grease fill stud on Trabon™ Reservoirs, 1/4 in. NPT female, with Check For use with Modu-Flo, E-Series, Lube Master, LubriSystem, PH and other Trabon grease pumps. 1/4 inch NPT female thread connects to end of hose on grease pump used to refill the reservoir.

Mating Coupler for Trabon Grease Fill Stud

Former part numbers: Lubriquip 506-322-000, Trabon 6322 Mates to fill stud 557374 Lubriquip part number 506-322-000 Trabon part number 6322

$32.10

BRACKET, MTG RTN FILTER

GG 558927

BRACKET, MTG RTN FILTER

Filter Mounting Bracket

Lubriquip part number 521-010-440

$100.00

MODU-FLO PUMP, ASSY AL-25

GG 563306

MODU-FLO PUMP, ASSY AL-25

Modu-Flo® AL-25 Pneumatic Pump without Reservoir

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

Easy to standardize on components and reduce inventory Adjustable pump output for fast, convenient customizing Lubriquip part number 521-000-021

$925.00

MANIFOLD, ASSY RESV TO PUMP

GG 563324

MANIFOLD, ASSY RESV TO PUMP

Graco 563324 Pump-to-Reservoir Manifold for Modu-Flo Pumps, NPT, Dry Gauge, Fill Check, Outlet Check, Blowout

Application: For use with Modu-Flo Pumps.

Pump/Reservoir Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Blowout Assembly, 0-3,000 psi Pressure Gauge
Lubriquip part number 521-001-180

Model: Trabon

Includes: Outlet Check Valve, System Fill Check Valve, Blowout Assembly, Pressure Gauge

$378.00

SWITCH, LL GRS RESV

GG 563322

SWITCH, LL GRS RESV

Graco 563322 Low Level Switch, 15 Amp, for all Grease Reservoirs

Application: For use with Modu-Flo, E-Series, LubriSystem and Lube Master Pumps.

Low Level Switch for 5, 6, 12 and 20 pt Cylindrical Grease Reservoirs
Lubriquip part number 521-001-110

Inlet Size (cm): 1.2700
Inlet Size (in): 0.5
Inlet Size (mm): 12.7000

Inlet Thread Type: NPT

$184.50

Modu-Flo Pump, Assembly, Hlj-25M

GG 563307

Modu-Flo Pump, Assembly, Hlj-25M

$991.00

VALVE, SOL ASSY 24VDC

GG 563332

VALVE, SOL ASSY 24VDC

Graco 563332 Trabon® Accessories - 3-way pneumatic solenoid valve, 24 VDC

Application: For use with LubriSystem®, Modu-Flo and E-Series Pneumatic Pumps.

3-Way, 24 VDC Solenoid Valve
Lubriquip part number 521-002-100

Compatible Material: Oil, Grease

Maximum NLGI Grade: #2

$510.00

KIT, ACCESSORY, L/L, 12/24/40 PT

GG 563318

KIT, ACCESSORY, L/L, 12/24/40 PT

Modu-Flo Low Level Switch Assemblies - 15 Amp Low Level Switch for 6 pt. Cylindrical Oil Reservoirs and all Tank Reservoirs, SPDT

15 amp Low Level Switch for 6 pt Cylindrical Oil Reservoirs and all Tank Reservoirs, SPDT

Lubriquip part number 521-001-050

$364.00

E-SERIES PUMP, 1/4NPSF

GG 563358

E-SERIES PUMP, 1/4NPSF

Graco 563358 E-Series™ Pump Only - with 1750 psi (121 bar) Rupture Disc

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

Easy field installation of accessories without disturbing existing plumbing
Smart pump design with few moving parts ensures long-lasting dependability
Lubriquip part number 521-300-180

Model: E-Series

Application: In-Plant Machinery
Compatible Material: Oil, Grease
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPSF
Includes: E-Series Pump, Rupture Disc
Material: Aluminum, Plastic
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum cST Grade (cST): 30000
Maximum Cycle Rate (CPM): 10
Maximum Fluid Output Pressure (bar): 138
Maximum Fluid Output Pressure (psi): 2000
Maximum Fluid Output Pressure (bar): 138
Maximum Fluid Output Pressure (psi): 2000
Maximum NLGI Grade: #2
Maximum Working Pressure (bar): 137.9
Maximum Working Pressure (kPa): 13790
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Power Type: Pneumatic

$484.00

SWITCH, SUBMERSIBLE, SPDT

GG 563273

SWITCH, SUBMERSIBLE, SPDT

Graco 563273 Cycle Switch (SPDT) and Bracket Assembly, Moisture-Resistant - MJ, MS, MHH and MXP Divider Valves

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

Provides positive feedback based on actual metering piston movement
Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install
Able to be set for normally open or normally closed operation

$648.00

E-SERIES PUMP, RESV ASSY GRS LL

GG 563360

E-SERIES PUMP, RESV ASSY GRS LL

Graco 563360 E-Series™ Pump and Reservoir Assembly - 5 lb (2.26 kg) Plastic Grease, 1/4 in. NPSF, Low Level Switch

Easy field installation of accessories without disturbing existing plumbing
Smart pump design with few moving parts ensures long-lasting dependability
Lubriquip part number 521-300-360

Model: E-Series

Air Inlet Size (in): 0.2502
Air Inlet Size (mm): 6.35
Application: In-Plant Machinery
Compatible Material: Grease
Maximum Working Pressure (bar): 24
Maximum Working Pressure (kPa): 2400
Maximum Working Pressure (MPa): 2.4
Maximum Working Pressure (psi): 350
Power Type: Pneumatic

$1,515.00

MAXI-FLO PUMP, 115 VAC REMOTE

GG 563376

MAXI-FLO PUMP, 115 VAC REMOTE

Graco 563376 Maxi-Flo™ Electric Pump, 115 VAC, 4 pt. (1.89 liter) Plastic Rectangular Oil Reservoir, Remote Control

Compact design with everything you need to get your single line resistive oil lubrication system installed and running quickly. A standard package comes complete with reservoir, pump, gear motor, and choice of internal or remote control. Simple slide switches allow for easy setup of pump run cycle time. Bright LED indicators for low level and power allow for easy troubleshooting and verification.

Integrated control with manual run button for easy setup
Compact design fits anywhere
500 psi (34 bar) rating for using with various orifice metering devices

Model: Maxi-Flo

Application: In-Plant Machinery
Compatible Material: Oil
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.125
Fluid Outlet Size (mm): 3.1750
Fluid Outlet Thread Type: NPSF
Includes: 4 pt Plastic Rectangular Oil Reservoir, Remote Control
Material: Plastic
Maximum Flow Rate (ci/min): 0.12
Maximum Fluid Output Pressure (bar): 34
Maximum Fluid Output Pressure (psi): 500
Maximum Fluid Output Pressure (bar): 34
Maximum Fluid Output Pressure (psi): 500
Maximum SUS Grade (SUS): 30000
Maximum Working Pressure (bar): 34.5
Maximum Working Pressure (kPa): 3450
Maximum Working Pressure (MPa): 3.5
Maximum Working Pressure (psi): 500
Minimum SUS Grade (SUS): 60
Overall Depth (cm): 16.4
Overall Depth (in): 6.44
Overall Depth (mm): 164
Overall Height (cm): 24.1
Overall Height (in): 9.5
Overall Height (mm): 241
Power Type: Electric

Call for pricing

E-SERIES PUMP, RESV ASSY GRS LL

GG 563364

E-SERIES PUMP, RESV ASSY GRS LL

Graco 563364 E-Series™ Pump with 6 lb. (2.72 kg) Plastic Cylindrical Grease Reservoir, Low Level Switch with 2350 psi (162 bar) Rupture Disc

Easy field installation of accessories without disturbing existing plumbing
Smart pump design with few moving parts ensures long-lasting dependability
Lubriquip part number 521-300-670

Model: E-Series

Application: In-Plant Machinery
Compatible Material: Grease
Compatible Metering Device: Series Progressive
Fluid Outlet Size (in): 0.5
Fluid Outlet Size (mm): 12.7000
Fluid Outlet Thread Type: NPSF
Includes: E-Series Pump, Plastic Cylindrical Grease Reservoir, Low Level Switch, Rupture Disc
Material: Aluminum, Plastic
Maximum Air Inlet Pressure (bar): 10.34
Maximum Air Inlet Pressure (kPa): 1034
Maximum Air Inlet Pressure (psi): 150
Maximum cST Grade (cST): 30000
Maximum Cycle Rate (CPM): 10
Maximum Fluid Output Pressure (bar): 138
Maximum Fluid Output Pressure (psi): 2000
Maximum Fluid Output Pressure (bar): 138
Maximum Fluid Output Pressure (psi): 2000
Maximum NLGI Grade: #2
Maximum Working Pressure (bar): 137.9
Maximum Working Pressure (kPa): 13790
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Minimum Air Inlet Pressure (psi): 40
Overall Depth (cm): 22.4
Overall Depth (in): 8.81
Overall Depth (mm): 224
Overall Height (cm): 26.7
Overall Height (in): 10.5
Overall Height (mm): 267
Overall Width (cm): 18.4
Overall Width (in): 7.25
Overall Width (mm): 184
Power Type: Pneumatic

$1,480.00

BODY, PUMP ASSY

GG 563380

BODY, PUMP ASSY

Lube Master® Pump Body For use with Electric and Mechanical Lube Master Pumps. Bare Pump Lubriquip part number 521-700-000

$3,840.00

CLUTCH, DRIVE

GG 563383

CLUTCH, DRIVE

Clutch drive with Ratchet Arm for Lube Master® Pumps For use with Lube Master Pump Packages.

Clutch drive with ratchet arm

Lubriquip part number 521-700-300

$1,180.00

BLOCK, BASE, MSP/MHH, NPSF

GG 563425

BLOCK, BASE, MSP/MHH, NPSF

Trabon® MSP Divider Valve - Intermediate Base Plate - 1/8-27 NPSF For use with Trabon® MSP/MHH Divider Valves. Intermediate base plate NPSF Lubriquip part number 527-000-871

$31.30

BLOCK, END, MSP/MHH

GG 563424

BLOCK, END, MSP/MHH

Trabon® MSP/Manzel® MHH Divider Valve Standard End Section For use with Trabon® MSP/MHH Divider Valves. Standard end section (Must be ordered in multiples of five) Must be ordered in multiples of 5 Lubriquip part number 527-000-851

$38.10

KIT, CROSSPORT, MSP, RH, CS

GG 563469

KIT, CROSSPORT, MSP, RH, CS

Trabon® MSP Divider Valve - Right Cross Port Bar For use with Trabon® MSP Divider Valves. Right Cross Port Bar - 1 outlet port plug is required for each cross port bar Lubriquip part number 527-005-320

$66.75

KIT, CROSSPORT, MSP, LH, CS

GG 563470

KIT, CROSSPORT, MSP, LH, CS

Trabon® MSP Divider Valve - Left Cross Port Bar For use with Trabon® MSP Divider Valves. Left Cross Port Bar - 1 outlet port plug is required for each cross port bar Lubriquip part number 527-005-330

$66.75

KIT, CROSSPORT, MSP, LH/RH, CS

GG 563471

KIT, CROSSPORT, MSP, LH/RH, CS

Trabon® MSP Divider Valve - Right and Left Cross Port Bar For use with Trabon® MSP Divider Valves. Left and Right Cross Port Bar - 2 outlet port plugs are required for each double cross port bar Lubriquip part number 527-005-340

$75.50

SWITCH, PROX MXP 3-PIN W/ IND

GG 563486

SWITCH, PROX MXP 3-PIN W/ IND

Graco 563486 Field Sensitive Mechanical Proximity Cycle, 20-32 VDC, 3-Pin - MXP, MX and MXO Divider Valves

Magnetically-operated sensing devices for sending system data to the controller or PLC.

Available in 115 VAC or 12-32 VDC
Available for all series progressive families to provide cycle rates up to 200 CPM
Pressure ratings up to 10,000 psi (690 bar)
Select models available with UL and CSA approvals
Lubriquip part number 527-006-130

Compatible Material: Oil, Grease

Material: 303 Stainless Steel, Viton
Maximum Working Pressure (bar): 517
Maximum Working Pressure (kPa): 51700
Maximum Working Pressure (MPa): 52
Maximum Working Pressure (psi): 7500
Power Connection Type: 3-Pin BH Mini

Call for pricing

FILTER, 138 MICRON INLINE 1/4 NPT

GG 563507

FILTER, 138 MICRON INLINE 1/4 NPT

Graco 563507 In-Line Oil and Grease Strainers - High Pressure, 7500 psi, 1/4-18 NPTF, 149 Micron

Application: For High Pressure In-Line Oil and Grease Filters.

149 micron, 100 Mesh In-Line Block Strainer (NPT)
Lubriquip part number 527-100-380

Maximum Working Pressure (bar): 517
Maximum Working Pressure (kPa): 51700
Maximum Working Pressure (MPa): 5170
Maximum Working Pressure (psi): 7500

Port Size (cm): 0.635
Port Size (in): 1/4
Port Size (mm): 6.35

$434.00

FILTER, 10 MICRON PLUG END

GG 563509

FILTER, 10 MICRON PLUG END

Graco 563509 End Plug Filter Assembly with 10 micron Filter Element, Lubriquip part number 527-100-540

Application: For use with High Pressure In-Line Oil Filters.

10 micron Replacement Filter Element for Graco part numbers 563511, 563513, 563516
Replacement filter element for Lubriquip part numbers 527-100-230, 527-100-580, 527-100-581, 527-100-780, 527-101-120, 527-101-223

For Use With: In-Line Oil Filters

$140.00

FILTER, 10 MICRON INLINE 1/4 NPT

GG 563511

FILTER, 10 MICRON INLINE 1/4 NPT

In-Line Oil Filters - High Pressure, 7500 psi, 1/4-18 NPTF, 10 Micron Lubriquip part number 527-100-581 Direct replacement for Lubriquip part number 527-100-230, 527-100-480, 527-100-580 Replacement element is Graco part number 563509

$320.00

FILTER, 25 MICRON PLUG END

GG 563510

FILTER, 25 MICRON PLUG END

Graco 563510 End Plug Filter Assembly with 25 micron Filter Element, Lubriquip part number 527-100-550

Application: For use with High Pressure In-Line Oil Filters.

25 micron Replacement Filter Element for Graco part numbers 563512, 563514, 563515
Replacement filter element for Lubriquip part numbers 527-100-240, 527-100-590 527-100-591, 527-100-790, 527-100-830, 527-101-224

For Use With: In-Line Oil Filters

$140.00

FILTER, 25 MICRON INLINE 1/4 NPT

GG 563512

FILTER, 25 MICRON INLINE 1/4 NPT

In-Line Oil Filters - High Pressure, 7500 psi, 1/4-18 NPTF, 25 Micron For use with High Pressure In-Line Oil Filters.

25 micron In-Line Oil Filter, NPT

Lubriquip part number 527-100-591 Direct replacement for Lubriquip part number 527-100-240 and 527-100-590 Replacement element is Graco part number 563510

$306.00

BLOCK, SECT END ASSY MXP

GG 563518

BLOCK, SECT END ASSY MXP

Trabon® MXP Divider Valve - End Section For use with Trabon® MXP Divider Valves. End section Lubriquip part number 527-300-090

$175.50

LUBRISYSTEM PUMP, AIR (NO RES)

GG 563579

LUBRISYSTEM PUMP, AIR (NO RES)

LubriSystem Standard Air Operated Pump without Reservoir

Easy to design, modify and adjust for oil or grease applications large or small. Great for operation of piston distributors. Rugged construction maximizes your productivity - upgrading to the internal timer control completely automates the system. All packages include internal pressure relief, so no need to install extra parts with additional costs. Combine with LubriSystem injectors for easy, low cost system design solutions.

Air Operated Pump for Single Line Parallel Systems

Ability to serve large systems - up to 100 lube points or more

Efficient design promotes increased productivity and less downtime

No reservoir included

Lubriquip part number 550-000-280

$1,105.00

BLOCK, BSPLT INTERM MXP 1/4 NPSF

GG 563519

BLOCK, BSPLT INTERM MXP 1/4 NPSF

Graco 563519 Trabon® MXP Divider Valve - Intermediate Base Plate - NPSF

Application: For use with Trabon® MXP Divider Valves.

Intermediate Base
Must be ordered in multiples of 2
1/4-18 NPSF

Model: Trabon
Series: MXP

Application: In-Plant Machinery
Inlet Size (cm): 0.635
Inlet Size (in): 1/4
Inlet Size (mm): 6.35
Inlet Thread Type: NPSF
Outlet Size (cm): 0.635
Outlet Size (in): 1/4
Outlet Size (mm): 6.35
Outlet Thread Type: NPSF

$116.00

LUBRISYSTEM PUMP, HAND

GG 563580

LUBRISYSTEM PUMP, HAND

LubriSystem Hand-Operated Pump - Pump Body without Reservoir

Sturdy construction of aluminum and steel to provide years of service. Compact design can be used in areas where space is limited. Rugged bracket allows the pump package to be mounted in place in any application.

The LubriSystem hand pump package offers versatility for use in any application, large or small. Great for operation with Injectors or Piston Distributors, with oil or grease.

General machinery lubrication where power is limited or not available

Bracket-mount design for easy installation

Rugged design for years of operation

Built-in pressure venting for use with injectors

Lubriquip part number 550-000-520

$1,445.00

TUBE, 3 BUNDLE 30 FT LG

GG 563796

TUBE, 3 BUNDLE 30 FT LG

$115.50

TUBE, 2 BUNDLE 15FT PRECHARGE

GG 563799

TUBE, 2 BUNDLE 15FT PRECHARGE

Graco 563799 15 ft. Pre-Charged Tube - 2 Tube Bundle, 3/16 in. OD - Orange, Black

Lubriquip part number 550-450-989

Application: On-Road Vehicles

Color: Black, Orange
Compatible Material: Grease
Material: Nylon
Maximum Working Pressure (bar): 56
Maximum Working Pressure (kPa): 560
Maximum Working Pressure (psi): 800
Overall Length (ft): 15
Overall Length (m): 5

$62.50

KIT, REPAIR PUMP AL-5M

GG 563902

KIT, REPAIR PUMP AL-5M

Modu-Flo Pump Assembly Repair Kits - AL-5, Single or Double Acting Repair Kit For use with Modu-Flo Pumps.

AL-5M seal kit

Lubriquip part number 560-001-021

$111.00

TUBE, 3 BUNDLE 10FT PRECHARGE

GG 563800

TUBE, 3 BUNDLE 10FT PRECHARGE

10 ft. Pre-Charged Tube - 3 Tube Bundle, 3/16 in. OD - Blue, Orange, Black Lubriquip part number 550-450-990

$68.00

KIT, REPAIR PUMP AL-25M

GG 563903

KIT, REPAIR PUMP AL-25M

Graco 563903 Modu-Flo Pump Assembly Repair Kits - AL-25, Single or Double Acting Repair Kit

Application: For use with Modu-Flo Pumps.

AL-25M seal kit
Lubriquip part number 560-001-031

For Use With: AL-25M Pumps

Includes: Piston Spring Retainer, Check Valve Spring, Check Valve Seat, Hardware
Kit Type: Repair Kit

$111.00

KIT, REPAIR PUMP HL-25M

GG 563906

KIT, REPAIR PUMP HL-25M

Graco 563906 HL-25M Seal Kit

Application: For use with Modu-Flo Pumps.

HL-25M seal kit
Lubriquip part number 560-001-061

For Use With: HL-25M Pumps

Includes: Check Valve Spring, Check Valve Seat, Hardware
Kit Type: Repair Kit

$85.75

Kit, Piston 1/4 Mvb Pump

GG 563918

Kit, Piston 1/4 Mvb Pump

$999.00

KIT, REPAIR PUMP E-SERIES

GG 563909

KIT, REPAIR PUMP E-SERIES

Graco 563909 E-Series Pump Repair Kit (Fixed Output)

Application: For use with E-Series Pumps.

Pump Repair Kit (fixed output)
Lubriquip part number 560-001-210

For Use With: E-Series Pumps

Includes: Check Valve Spring, Check Valve Seat, O-Rings, Hardware
Kit Type: Repair Kit

$68.50

Kit, Gage Glass Spare Parts

GG 563923

Kit, Gage Glass Spare Parts

$63.50

KIT, REPAIRI ND CYCLE MSP

GG 563928

KIT, REPAIRI ND CYCLE MSP

Trabon® MSP Mounting Accessories and Spare Parts - MSP Cycle Pin Indicator Repair Kit, Gasket For use with Trabon® MSP Divider Valves.

MSP cycle pin indicator repair kit, gasket

Lubriquip part number 560-002-050

$157.50

KIT, REPAIR IND CYC

GG 563929

KIT, REPAIR IND CYC

Trabon® MSP Mounting Accessories and Spare Parts - MSP Cycle Pin Indicator Repair Kit, O-Ring For use with Trabon® MSP Divider Valves.

MSP cycle pin indicator repair kit, O-ring

Lubriquip part number 560-002-055

$117.00

KIT, BURST DISK 1450 PS1 YELLOW 6PK

GG 563962

KIT, BURST DISK 1450 PS1 YELLOW 6PK

Blowout Disc Kit - (6) Yellow, 1450 psi, 11/16 in.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Packs of 6 (11/16 inch / 17.5 mm diameter discs)

1,450 psi - yellow

Lubriquip part number 560-900-270

$27.90

KIT, B/O DISC 1750 RED

GG 563963

KIT, B/O DISC 1750 RED

Graco 563963 Blowout Disc Kit - (6) Red, 1750 psi, 11/16 in.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
1,750 psi - red
Lubriquip part number 560-900-280

Color: Red

$27.90

KIT, B/O DISC 2950 BLUE

GG 563966

KIT, B/O DISC 2950 BLUE

Graco 563966 Blowout Disc Kit - (6) Blue, 2950 psi, 11/16 in.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
2,940 psi - blue
Lubriquip part number 560-900-320

Color: Blue

Maximum Working Pressure (bar): 203
Maximum Working Pressure (kPa): 20326
Maximum Working Pressure (MPa): 20.3
Maximum Working Pressure (psi): 2950
Number of Pieces: 6
Overall Diameter (cm): 1.7
Overall Diameter (in): 0.688
Overall Diameter (mm): 17

$27.90

HUSKY PUMP, 1050A-E, BN/BN/BN/4A

GG 648007

HUSKY PUMP, 1050A-E, BN/BN/BN/4A

Husky 1050e AL Pump, AL Center Section, BN Seats, BN Balls & BN Diaphragm

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material

Diaphragm Pump

Runs dry
No rotating or moving fluid seals
Self-priming

Electric Drive

Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid

Fluid Section

Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls

Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$7,150.00

GRACO INC. S10595

GG 832503

VALVE, HI PRESS

GG 833383

GG 8462-17

GG 865696

GG 902147

MONARK TRANSFER PUMP, 5:1

Graco 902147 5:1 Ratio Stainless Steel Monark Pump

GG 902980

GG 903508

REGULATOR BACK PRESSURE

Graco 903508 Back Pressure Regulator, Low Pressure Corrosion Resistant, 15 GPM (56.7 lpm), 180 Max psi, Manual, 3/8 (m) x 3/8 (f), with Gauge

GG 903958

REGULATOR, MASTIC

Graco 903958 Spring Operated Mastic Fluid Pressure Regulator

GG 904029

BALL, SEAT

Graco 904029 Ball Kit for High Pressure Mastic Regulators

GG 904427

GG 915515

GG 904030

SEAT, REGULATOR

GG 557518

ROD, TIE MJ 6

Graco 557518 Trabon® MJ Divider Valve - 6 Section Tie Rod (2 Required)

GG 557433

DISK, BURST, .688 1450 PSI YELLOW

GG 557428

DISK, BURST, .375 2950/7300 PSI BLUE

GG 557439

DISK, BURST, .688 3250 PSI PURPLE

GG 557374

FITTING, FILL STUD, 1/4 NPT

Graco 557374 Trabon Style Fill Stud, 1/4 inch NPT male

GG 557735

ROD, TIE, MSP, 7 SECTION

GG 557734

ROD, TIE, MSP, 6 SECTION

GG 557427

DISK, .375 2650/6400 PSI PNK

Graco 557427 Replacement Rupture Disk, 3/8 in, 6400 psi, Pink

GG 557425

DISK, BURST, .375 2050/5500 PSI ORANGE

GG 557736

ROD, TIE, MSP, 8 SECTION

GG 557490

ROD, TIE, MX 5

GG 557700

STRAINER, 138 MICRON

GG 557488

ROD, TIE, MX 3

GG 557515

ROD, TIE, FEEDER, MJ-3

GG 557434

DISK, .688 1750 PSI RED

Graco 557434 Replacement Rupture Disk, 11/16 in, 1750 psi, Red

GG 557546

BRACKET, SWITCH, T-CYCLE

GG 557436

DISK, .688 2350 PSI ALUM

Graco 557436 Replacement Rupture Disk, 11/16 in, 2350 psi, Aluminum

GG 557731

ROD, TIE, MSP, 3 SECTION

Graco 557731 Trabon® MSP Divider Valve - 3 Section Tie Rod (3 Required)

GG 557733

ROD, TIE, MSP, 5 SECTION

GG 557797

CAP, FILL, RESERVOIR

GG 557766

ROD, TIE, MXP, 3 SECTION

Graco 557766 Trabon® MXP Divider Valve - 3 Section Tie Rod (3 Required)

GG 557804

FILTER, 25 MICRON, 3 5/8 LG

Graco 557804 Replacement Filter Cartridge, 25-micron Standard, Lubriquip part 540-272-001, replaces part 540-272-000 and Trabon part 40272, Genuine Trabon replacement element for Lubriquip assemblies 183-000-010, 183-000-011, 183-000-050, 183-000-051, 183-000-150, 183-000-151

GG 557813

METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT

Graco 557813 Meter-Flo® Electric Pump, 30 cu in/min (492 cc/min) @ 1,725 rpm, NPT Ports, CCW

GG 557815

METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT