GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

HUSKY PUMP, 1050A-PAU3AA1BNACTP

GG 647731

HUSKY PUMP, 1050A-PAU3AA1BNACTP

Husky 1050 Series Air-Operated Double Diaphragm Transfer Pump for Oil Evacuation, Oil Transfer, BN/AC/TPE

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover One-Piece Center Section - Eliminates air leaks for more efficient operation Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation Multiple Ports - Increased number of ports for installation flexibility Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability) Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$1,445.00

1050A Dia Pump, Aluminum, PTFE, PTFE

GG 647736

1050A Dia Pump, Aluminum, PTFE, PTFE

Call for pricing

HUSKY PUMP, 1050A-PA01AA3SSSSPTPT

GG 647673

HUSKY PUMP, 1050A-PA01AA3SSSSPTPT

Graco 647673 Husky 1050 Diaphragm Pump: Drum Riser Tube with Stainless Steel Seats and Check Balls

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Compatible Material: Antifreeze, Detergent, Motor Oil, Gear Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water - Freshwater Treatment, Ink and Colorant
        Fluid Section Material: Aluminum
        For Use With: HFR Metering System
        Includes: Riser Tube
        Material: Carbon Steel
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Working Pressure (bar): 8.6
        Maximum Working Pressure (kPa): 86
        Maximum Working Pressure (MPa): 0.9
        Maximum Working Pressure (psi): 125
        Power Source: Air

$1,965.00

HUSKY PUMP, 1050A-PA01AA1FKFKFK

GG 647670

HUSKY PUMP, 1050A-PA01AA1FKFKFK

Graco 647670 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section with BN Seals, FKM Seats, FKM Balls, FKM Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Fluoroelastomer
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: FKM
        Diaphragm Material: Fluoroelastomer
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure

$2,320.00

HUSKY PUMP, 1050P-PP01AP1PPSPSPPT

GG 649001

HUSKY PUMP, 1050P-PP01AP1PPSPSPPT

Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, PP Seats, SP Balls & SP Diaphragm

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$1,950.00

HUSKY PUMP, 1050A-E, SS/PT/PS/4B

GG 648032

HUSKY PUMP, 1050A-E, SS/PT/PS/4B

Husky 1050e AL (NPT) Pump, BLDC Motor, AL Center Section, SS Seats, PTFE Balls & PTFE/SP Diaphragm

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material

Diaphragm Pump

Runs dry
No rotating or moving fluid seals
Self-priming

Electric Drive

Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid

Fluid Section

Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls

Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$9,210.00

HUSKY PUMP, 1050A-E, SS/PT/PS/5A

GG 648212

HUSKY PUMP, 1050A-E, SS/PT/PS/5A

Husky 1050e Al (NPT) Pump, 240V Compressor, Standard AC Motor, AL Center Section, SS Seats, PTFE Balls & PTFE/SP Diaphragm

Durable Pump Technology

Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material

Diaphragm Pump

Runs dry
No rotating or moving fluid seals
Self-priming

Electric Drive

Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid

Fluid Section

Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls

$8,200.00

HUSKY PUMP, 1050A-PAU3AA1TPACTP

GG 647648

HUSKY PUMP, 1050A-PAU3AA1TPACTP

Graco 647648 Husky 1050 Series Air-Operated Double Diaphragm Transfer Pump for Fuel, TPE/AC

Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section - Eliminates air leaks for more efficient operation
Multiple Ports - Increased number of ports for installation flexibility
Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability)
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050

Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Acetal
Center Section Material: Aluminum
Compatible Material: Fuel
Connection Type: Threaded
Diaphragm Material: TPE (Hytrel)
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum
For Use With: Fuel Transfer
Manifold O-Ring Material: None
Material: Aluminum
Maximum Air Consumption (SCFM): 25
Maximum Air Pressure (bar): 3.5
Maximum Air Pressure (kPa): 350
Maximum Air Pressure (MPa): 0.35
Maximum Air Pressure (psi): 50
Maximum Cycle Rate (CPM): 280
Maximum Flow Rate (GPM): 38
Maximum Flow Rate (L/min): 144
Maximum Fluid Pressure (bar): 3.5
Maximum Fluid Pressure (kPa): 350
Maximum Fluid Pressure (MPa): 0.35
Maximum Fluid Pressure (psi): 50
Maximum Fluid Pressure (bar): 3.5
Maximum Fluid Pressure (kPa): 350
Maximum Fluid Pressure (MPa): 0.35
Maximum Fluid Pressure (psi): 50
Maximum Solid Size (cm): 0.3175
Maximum Solid Size (in): 0.125
Maximum Solid Size (mm): 3.175
Overall Height (in): 15.9
Power Source: Air
Pump Ratio: 1:1

$1,525.00

HUSKY PUMP, 1050A-PA01EA1SPSPSPPT

GG 647689

HUSKY PUMP, 1050A-PA01EA1SPSPSPPT

Graco 647689 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section with BN Seals, SP Seats, SP Balls & SP Diaphragm

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak™ - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Santoprene
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Santoprene
        Diaphragm Material: Santoprene
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6

Call for pricing

HUSKY PUMP, 1050P-PP01AP1PPPTPTPT

GG 649006

GG 649006
HUSKY PUMP, 1050P-PP01AP1PPPTPTPT
Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,190.00

HUSKY PUMP, 1050A-E, BN/BN/BN/5B

GG 648187

GG 648187
HUSKY PUMP, 1050A-E, BN/BN/BN/5B
Husky 1050e Al (NPT) Pump, 120V Compressor, BLDC Motor, AL Center Section, BN Seats, BN Balls & BN Diaphragm
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology
Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
Diaphragm Pump
Runs dry
No rotating or moving fluid seals
Self-priming
Electric Drive
Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
Fluid Section
Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
Patent Pending Air Charged Drive
Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$9,740.00

HUSKY PUMP, 1050A-E, BN/BN/BN/4D

GG 648097

GG 648097
HUSKY PUMP, 1050A-E, BN/BN/BN/4D
Husky 1050e AL (NPT) Pump, C1D1 Flame Proof Motor, AL Center Section, BN Seats, BN Balls & BN Diaphragm
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology
Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
Diaphragm Pump
Runs dry
No rotating or moving fluid seals
Self-priming
Electric Drive
Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
Fluid Section
Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
Patent Pending Air Charged Drive
Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$7,510.00

HUSKY PUMP, 1050P-PP01AP1SSSSPTPT

GG 649010

GG 649010
HUSKY PUMP, 1050P-PP01AP1SSSSPTPT
Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,500.00

HUSKY PUMP, 1050P-PP01AP1PPPTPOPT

GG 649007

GG 649007
HUSKY PUMP, 1050P-PP01AP1PPPTPOPT
Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,530.00

HUSKY PUMP, 1050P-PP01AP1PPCRCOPT

GG 649009

GG 649009
HUSKY PUMP, 1050P-PP01AP1PPCRCOPT
Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, PP Seats, CR Balls & CO Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,340.00

HUSKY PUMP, 1050P-PP01AP1SPSPSPPT

GG 649021

GG 649021
HUSKY PUMP, 1050P-PP01AP1SPSPSPPT
Husky 1050 PP (NPT) Pump, Center Flange, PP Center Section, SP Seats, SP Balls & SP Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$1,875.00

HUSKY PUMP, 1050P-PP01AP2PPCRCOPT

GG 649037

GG 649037
HUSKY PUMP, 1050P-PP01AP2PPCRCOPT
Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, CR Balls & CO Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,330.00

HUSKY PUMP, 1050C-PC01AC2PPPTPTPT

GG 649201

GG 649201
HUSKY PUMP, 1050C-PC01AC2PPPTPTPT
Husky 1050 Conductive PP Pump, End Flange, Conductive PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$3,120.00

HUSKY PUMP, 1050C-PC01AC1PPPTPTPT

GG 649176

GG 649176
HUSKY PUMP, 1050C-PC01AC1PPPTPTPT
Husky 1050 Conductive PP Pump, Conductive PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$3,160.00

HUSKY PUMP, 1050P-PP01AP2PPBNBNPT

GG 649030

GG 649030
HUSKY PUMP, 1050P-PP01AP2PPBNBNPT
Graco 649030 Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, BN Balls, BN Diaphragm & BN Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050
Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Buna-N
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: End Flange ANSI/DIN
Diaphragm Compatible Material: Buna
Diaphragm Material: Buna-N
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Section Material: Polypropylene
Manifold Configuration: End Port
Manifold O-Ring Material: PTFE
Material: Polypropylene
Maximum Air Consumption (SCFM): 67
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 280
Maximum Flow Rate (GPM): 50
Maximum Flow Rate (L/min): 189
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Operating T

Call for pricing

HUSKY PUMP, 1050P-PP01AP2PPPTPTPT

GG 649034

GG 649034
HUSKY PUMP, 1050P-PP01AP2PPPTPTPT
Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040

$2,180.00

HUSKY PUMP, 1050F-PP01AF1FKFKFK

GG 649389

GG 649389
HUSKY PUMP, 1050F-PP01AF1FKFKFK
Graco 649389 Husky 1050 PVDF Pump, Center Flange, PP Center Section, FKM Seats, FKM Balls & FKM Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050
Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Fluoroelastomer
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: Center Flange ANSI/DIN
Diaphragm Compatible Material: FKM
Diaphragm Material: Fluoroelastomer
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Section Material: PVDF (Kynar)
Manifold Configuration: Center Port
Material: PVDF
Maximum Air Consumption (SCFM): 67
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 280
Maximum Flow Rate (GPM): 50
Maximum Flow Rate (L/min): 189
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Solid Size (cm): 0.3175
Maximum Solid Size

$6,150.00

HUSKY PUMP, 1050F-PP01AF2FKFKFK

GG 649403

GG 649403
HUSKY PUMP, 1050F-PP01AF2FKFKFK
Graco 649403 Husky 1050 PVDF Pump, End Flange, PP Center Section, FKM Seats, FKM Balls & FKM Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050
Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Fluoroelastomer
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
Connection Type: End Flange ANSI/DIN
Diaphragm Compatible Material: FKM
Diaphragm Material: Fluoroelastomer
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Section Material: PVDF (Kynar)
Manifold Configuration: End Port
Material: PVDF
Maximum Air Consumption (SCFM): 67
Maximum Air Pressure (bar): 8.6
Maximum Air Pressure (kPa): 860
Maximum Air Pressure (MPa): 0.86
Maximum Air Pressure (psi): 125
Maximum Cycle Rate (CPM): 280
Maximum Flow Rate (GPM): 50
Maximum Flow Rate (L/min): 189
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maximum Fluid Pressure (bar): 8.6
Maximum Fluid Pressure (kPa): 860
Maximum Fluid Pressure (MPa): 0.86
Maximum Fluid Pressure (psi): 125
Maxim

$6,060.00

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

GG 289012

GG 289012
AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP
Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, AUTOMOTIVE, HVLP, .047

GG 289035

GG 289035
AIRPRO GUN, AUTOMOTIVE, HVLP, .047
Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Automotive
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, SIPHON, CONV, .070

GG 289029

GG 289029
AIRPRO GUN, SIPHON, CONV, .070
Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Siphon Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$639.00

AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

GG 289037

GG 289037
AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047
Graco 289037 AirPro Air Spray Pressure Feed Gun, Compliant, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Automotive
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

GG 289011

GG 289011
AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP
Graco 289011 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Specialty
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 590
Gun Weight (kg): 0.59
Gun Weight (lb): 1.3
Gun Weight (oz): 20.8
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$545.00

Kit, Air Cap, Gen Metal, Conv

GG 289040

GG 289040
Kit, Air Cap, Gen Metal, Conv

$168.00

Kit, Air Cap, Gen Metal, Comp

GG 289042

GG 289042
KIT,AIR CAP,GEN METAL,COMP
Graco 289042 Air Cap Kit for AirPro Compliant Guns with 0.020-0.070 inch (0.5-1.8 mm) Nozzle, General Metal

$147.00

Kit, Air Cap, Gen Metal, HVLP

GG 289041

GG 289041
KIT,AIR CAP,GEN METAL,HVLP
Graco 289041 General Metal Spray Gun Aircap Kit
Bleed Type: Non-Bleeder
Body Material: Metal
Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

$147.00

Kit, Air Cap, Gen Metal, Comp

GG 289044

GG 289044
Kit, Air Cap, Gen Metal, Comp

$155.00

Kit, Air Cap, Gen Metal, Comp

GG 289045

GG 289045
Kit, Air Cap, Gen Metal, Comp

$155.00

Kit, Air Cap, Waterborne, Conv

GG 289046

GG 289046
Kit, Air Cap, Waterborne, Conv

$121.50

Kit, Air Cap, Ceramic, Conv.

GG 289049

GG 289049
Kit, Air Cap, Ceramic, Conv.

$121.50

Kit, Nut, Air Valve, U-Cup Assembly

GG 289052

GG 289052
Kit, Nut, Air Valve, U-Cup Assembly

$21.60

Kit, Air Cap, Spatter, Hvlp

GG 289053

GG 289053
Kit, Air Cap, Spatter, Hvlp

$155.00

Nozzle Kit for AirPro Conventional Guns with 0.086 inch (2.2 mm) Nozzle, High Wear

GG 289076

GG 289076
Nozzle Kit for AirPro Conventional Guns with 0.086 inch (2.2 mm) Nozzle, High Wear

$267.00

Kit, Accessory, Aircap, Lacquer

GG 289080

GG 289080
KIT, ACCY,AIRCAP,LACQUER
Graco 289080 Air Cap Lacquer Kit, includes air cap optimized to spray lacquer

$153.00

AIRPRO GUN, STAIN, COMPLIANT, .040

GG 289111

GG 289111
AIRPRO GUN, STAIN, COMPLIANT, .040
Graco 289111 AirPro Air Spray Pressure Feed Gun, Compliant, 0.040 inch (1.0 mm) Nozzle, for Wood Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Application: Wood
Applicator Type: Manual
Bleed Type: Non-Bleeder
Compatible Material: NGR, Solvent borne, Stains, Toner, UV Coating, Waterborne
Feed Type: Pressure Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.10
Fluid Orifice Size (in): 0.040
Fluid Orifice Size (mm): 1.0
Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

Call for pricing

Kit, Nozzle, Stain, .040

GG 289112

GG 289112
Kit, Nozzle, Stain, .040

$110.50

Kit, Air Inlet Valve Assy

GG 289142

GG 289142
KIT,AIR INLET VALVE ASSY
Graco 289142 Sharpe Air Inlet Valve Assembly for AirPro Gravity Feed Spray Gun

$64.75

Kit, Repair, Trigger (Single)

GG 289143-S

GG 289143-S
Kit, Repair, Trigger (Single)

$21.00

Kit Oring

GG 289189

GG 289189
Kit Oring

$15.90

Kit, Upgrde, Hd, Ptfe Diaphragm, 2150

GG 289226

GG 289226
Kit, Upgrde, Hd, Ptfe Diaphragm, 2150

$2,380.00

Regulator, Heated Fluid

GG 289208

GG 289208
REGULATOR, HEATED FLUID

Call for pricing

FINEX GUN, GRACO, 2, HVLP, 1.4

GG 289239

GG 289239
FINEX GUN, GRACO, 2, HVLP, 1.4
Graco 289239 Finex Air Spray Gravity Feed Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Applicator Type: Manual
Bleed Type: Non-Bleeder
Body Material: Metal
Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Standard Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Product Type: Spray Gun

$246.50

FINEX GUN, GRACO, 2, HVLP, 1.8

GG 289241

GG 289241
FINEX GUN, GRACO, 2, HVLP, 1.8
Graco 289241 Finex Air Spray Gravity Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Applicator Type: Manual
Bleed Type: Non-Bleeder
Body Material: Metal
Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Standard Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.071
Fluid Orifice Size (mm): 1.8
Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 540
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Gun Weight (oz): 19.05
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100
Product Type: Spray Gun

$246.50

Kit, Retaining Ring

GG 289079

GG 289079
KIT,RETAINING RING
Graco 289079 Retaining Ring Kit

$42.10

FINEX GUN, GRACO, 2, CONV, 1.4

GG 289244

GG 289244
FINEX GUN, GRACO, 2, CONV, 1.4
Graco 289244 Finex Air Spray Gravity Feed Gun, conventional, 0.055 in (1.4 mm) needle/ nozzle size
Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.
Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex
Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM
Applicator Type: Manual
Bleed Type: Non-Bleeder
Body Material: Metal
Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
Feed Type: Standard Gravity Feed
Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4
Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 540
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Gun Weight (oz): 19.05
Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7
Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature (°C): 43
Maximum Fluid Temperature (°F): 109
Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100
Product Type: Spray Gun

$200.50

Kit, Bracket for Sd Reel, Top

GG 24K285

GG 24K285
Kit, Bracket for Sd Reel, Top

$161.50

Kit, Repair, Seals, T1, Lower

GG 24K363

GG 24K363
Kit, Repair, Seals, T1, Lower

$134.00

KIT, ACCESSORY, PRESS SWITCH

GG 24K414

GG 24K414
KIT, ACCESSORY, PRESS SWITCH
General Pressure Switch, 1/4 NPT Male, 9.6-32 VDC, 4-Pin, M12 Micro-Connector
Signals your lubrication controller when the lube system reaches the desired pressure level.
Durable design allows operation in harsh environment. Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly LED lights visually display pressure switch functions Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers Moisture resistant and factory set to ensure accuracy for long life and reliability Sends an alarm signal to alert either a high or low pressure condition Available for hydraulic pressures from 290 to 5800 psi (20 to 400 bar) 1/4 in NPT thread allows quick connection to injector systems

$473.00

KIT, GLYCERIN, GALLON, GR

GG 24K694

GG 24K694
KIT, GLYCERIN, GALLON, GR
Graco 24K694 Glycerin Based Hose Lube (1 gallon)

$146.00

Restrictor, Orifice Assy, .085

GG 24K682

GG 24K682
Restrictor, Orifice Assy, .085

Call for pricing

Kit, Fma, Cartridge, Hi Res, 016

GG 24K801

GG 24K801
KIT,FMA,CARTRIDGE,HI RES,016
KIT INCLUDES: PLATE, FMA, CARTRIDGE, HI RES, 016 [QTY. 1], DOCUMENT, DECLARATION [QTY. 1], CONNECTOR, SPLITTER, (2)M12(M)XM12(F) [QTY. 1], CABLE, CAN, FEMALE/FEMALE, 15.0M [QTY. 1]

$27,540.00

Kit, Fma, Mastic, Hi Res, 016

GG 24K803

GG 24K803
KIT,FMA,MASTIC,HI RES,016
KIT INCLUDES: PLATE, FMA, MASTIC, HI RES, 016 [QTY. 1], DOCUMENT, DECLARATION [QTY. 1], CONNECTOR, SPLITTER, (2)M12(M)XM12(F) [QTY. 1], CABLE, CAN, FEMALE/FEMALE, 15.0M [QTY. 1]

$28,140.00

Kit, Fma, Htd Mastic, Mtr, 256

GG 24K812

GG 24K812
Kit, Fma, Htd Mastic, Mtr, 256

$44,990.00

KIT, 5:1 TANK PACKAGE NPT

GG 24K839

GG 24K839
KIT, 5:1 TANK PACKAGE NPT
Graco 24K839 LD Series 5:1 Deluxe Stationary 275 Gallon (1040 Liter) Oil Pump with SD™ Series Hose Reel Package - Preset Meter Type
Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.
Three Inch Air Motor -Provides more power to create better flow.
Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

Model: LD
Air Inlet Size (in): 0.25
Application: Oil
Compatible Material: Oil
Fluid Inlet Size (cm): 2.5400
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4000
Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Maximum Flow Rate (GPM): 6.7
Maximum Working Pressure (bar): 52
Maximum Working Pressure (kPa): 5200
Maximum Working Pressure (MPa): 5.2
Maximum Working Pressure (psi): 750
Power Type: Pneumatic
Pump Ratio: 5:1

$4,700.00

Kit, Seal, Airvalve, Large

GG 24K859

GG 24K859
Kit, Seal, Airvalve, Large

$66.00

Kit, Rebuild, Airvalve, Large

GG 24K860

GG 24K860
Kit,Rebuild,Airvalve,Large

$177.00

KIT, DIAPHRAGM-L1 FK

GG 24K903

GG 24K903
KIT, DIAPHRAGM-L1 FK
FKM (Viton) Diaphragm Kit for 3-inch Pump

$2,620.00

Kit, Rplc, Fld Dia.Plate, 3300 A

GG 24K906

GG 24K906
Kit, Rplc, Fld Dia.Plate, 3300 A

$323.00

KIT, SEAT 3300 AC

GG 24K928

GG 24K928
KIT, SEAT 3300 AC
3-inch Acetal Seat Kit

$1,335.00

KIT, SEAT 3300 SP

GG 24K934

GG 24K934
KIT, SEAT 3300 SP
Graco 24K934 Seat Kit

$251.00

KIT, SEAT 3300 SS

GG 24K935

GG 24K935
KIT, SEAT 3300 SS
Graco 24K935 Seat Kit

$1,580.00

KIT, BALL-L1/L2 PT

GG 24K943

GG 24K943
KIT, BALL-L1/L2 PT
Graco 24K943 Ball Kit

$1,285.00

KIT, BALL-L1/L2 SP

GG 24K944

GG 24K944
KIT, BALL-L1/L2 SP
Graco 24K944 Ball Kit

$391.00

Kit, Rebuild, Airvalve, Fk, Lg

GG 24K954

GG 24K954
Kit, Rebuild, Airvalve, Fk, Lg

$197.00

Kit, Tip, Nosepiece, Manifold

GG 24K994

GG 24K994
Kit, Tip, Nosepiece, Manifold

$317.00

Kit, Manifol, Recirculation

GG 24K993

GG 24K993
Kit, Manifol, Recirculation

$249.00

Kit, Transducer

GG 24K999

GG 24K999
Kit, Transducer

$326.00

Kit, Fluid Heater 240V E-10

GG 24L008

GG 24L008
Kit, Fluid Heater 240V E-10

$2,640.00

Kit, Heater Rtd

GG 24L973

GG 24L973
Kit, Heater Rtd

$645.00

CHANNEL, XD ENCLOSURE, 1 REEL

GG 24N323

GG 24N323
CHANNEL, XD ENCLOSURE, 1 REEL
Graco 24N323 XD Series Hose Reel Enclosed Reel Mounting Channel - Accommodates 1 Reel

Number of Pieces: 9

$142.00

Airpro Gun, Efx, Conv, .039, Rnd

GG 24M392

GG 24M392
Airpro Gun, Efx, Conv, .039, Rnd

$2,030.00

Kit, Air Cap

GG 24N275

GG 24N275
Kit, Air Cap

$141.00

RAC 5 TIP, SPRAY

GG 286413

GG 286413
RAC 5 TIP, SPRAY
Graco 286413 RAC 5 SwitchTip, 413
The Reverse-A-Clean (RAC) 413 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.013

$62.75

RAC 5 TIP, SPRAY

GG 286415

GG 286415
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 415 The Reverse-A-Clean (RAC) 415 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286417

GG 286417
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 417 The Reverse-A-Clean (RAC) 417 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286421

GG 286421
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 421 The Reverse-A-Clean (RAC) 421 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286419

GG 286419
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 419 The Reverse-A-Clean (RAC) 419 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286423

GG 286423
RAC 5 TIP, SPRAY
Graco 286423 RAC 5 SwitchTip, 423
The Reverse-A-Clean (RAC) 423 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.023
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286425

GG 286425
RAC 5 TIP, SPRAY
Graco 286425 RAC 5 SwitchTip, 425
The Reverse-A-Clean (RAC) 425 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.025
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286427

GG 286427
RAC 5 TIP, SPRAY
Graco 286427 RAC 5 SwitchTip, 427
The Reverse-A-Clean (RAC) 427 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.027
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286429

GG 286429
RAC 5 TIP, SPRAY
Graco 286429 RAC 5 SwitchTip, 429
The Reverse-A-Clean (RAC) 429 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.9
Maximum Flow Rate (L/min): 3.41
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.029
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286435

GG 286435
RAC 5 TIP, SPRAY
Graco 286435 RAC 5 SwitchTip, 435
The Reverse-A-Clean (RAC) 435 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.035
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286439

GG 286439
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 439 The Reverse-A-Clean (RAC) 439 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286443

GG 286443
RAC 5 TIP, SPRAY
Graco 286443 RAC 5 SwitchTip, 443
The Reverse-A-Clean (RAC) 443 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.043 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 1.98
Maximum Flow Rate (L/min): 7.50
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.043
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286451

GG 286451
RAC 5 TIP, SPRAY
Graco 286451 RAC 5 SwitchTip, 451
The Reverse-A-Clean (RAC) 451 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.051 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 2.79
Maximum Flow Rate (L/day): 10.57
Maximum Flow Rate (L/min): 10.56
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.051
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286455

GG 286455
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 455 The Reverse-A-Clean (RAC) 455 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.055 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286511

GG 286511
RAC 5 TIP, SPRAY
Graco 286511 RAC 5 SwitchTip, 511
The Reverse-A-Clean (RAC) 511 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.12
Maximum Flow Rate (L/min): 0.45
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.011
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$62.75

RAC 5 TIP, SPRAY

GG 286513

GG 286513
RAC 5 TIP, SPRAY
Graco 286513 RAC 5 SwitchTip, 513
The Reverse-A-Clean (RAC) 513 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.013

$62.75

RAC 5 TIP, SPRAY

GG 286515

GG 286515
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 515 The Reverse-A-Clean (RAC) 515 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286517

GG 286517
RAC 5 TIP, SPRAY
Graco 286517 RAC 5 SwitchTip, 517
The Reverse-A-Clean (RAC) 517 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.017

$62.75

RAC 5 TIP, SPRAY

GG 286519

GG 286519
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 519 The Reverse-A-Clean (RAC) 519 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286521

GG 286521
RAC 5 TIP, SPRAY
Graco 286521 RAC 5 SwitchTip, 521
The Reverse-A-Clean (RAC) 521 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.021

$62.75

RAC 5 TIP, SPRAY

GG 286523

GG 286523
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 523 The Reverse-A-Clean (RAC) 523 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286525

GG 286525
RAC 5 TIP, SPRAY
Graco 286525 RAC 5 SwitchTip, 525
The Reverse-A-Clean (RAC) 525 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.025

$62.75

RAC 5 TIP, SPRAY

GG 286527

GG 286527
RAC 5 TIP, SPRAY
Graco 286527 RAC 5 SwitchTip, 527
The Reverse-A-Clean (RAC) 527 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.
Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip
Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.027
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$62.75